Polymer Chemistry

Papers
(The TQCC of Polymer Chemistry is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Contents list81
Front cover75
Front cover71
Front cover57
Bioderived copolymer alternatives to poly(styrene-co-maleic anhydride) via RAFT-mediated copolymerization56
Highly efficient synthesis of random isobutylene/alkenyl styrene copolymers with pendant vinyl groups via cationic polymerization for versatile functionalization53
Functionalized cyclic olefin copolymers: chemoselective polymerization of a cyclopropane-containing norbornadiene dimer using a titanium catalyst and post-polymerization modification53
Binuclear Ni catalyzed ethylene copolymerization with short chain alkenol monomers52
BH3·SMe2 addition enables molar mass control via chain stabilization in phosphine–borane dehydropolymerization50
Synthesis of novel D–π–A-based photosensitive alkoxyamine: application of two-photon polymerization via nitroxide-mediated photopolymerization48
Expedient synthesis and ring-opening metathesis polymerization of pyridinonorbornenes47
Back cover47
RAFT polymerisation of N-vinylformamide and the corresponding double hydrophilic block copolymers46
Novel covalent adaptable networks (CANs) of ethylene/1-octene copolymers (EOCs) made by free-radical processing: comparison of structure–property relationships of EOC CANs with EOC thermosets44
Introduction to Plastic Conversion43
High-performance polyethylene elastomers using a hybrid steric approach in α-diimine nickel precatalysts43
Bilayer-domain formation of thermoresponsive amphiphilic block copolymers in hybrid liposomes for synthetic molecular channels42
Fabrication of poly(4-vinylpyridine)-b-polystyrene-b-poly(4-vinylpyridine) triblock copolymer particles via three-dimensional soft confined self-assembly41
Fluorinated zwitterionic polymers as dynamic surface coatings38
Contents list38
Front cover38
Precisely controlled yet dynamically exchanged micelles via the self-assembly of amphiphilic acrylate random copolymers in water37
Back cover36
Contents list36
Back cover36
Back cover35
Contents list35
Front cover35
Front cover34
Contents list33
Back cover33
Front cover33
Front cover32
Back cover32
Contents list32
Front cover31
Contents list31
Front cover31
Contents list31
Contents list30
Contents list30
Front cover29
Contents list29
Contents list29
Contents list29
Front cover28
Back cover28
Contents list28
Back cover28
Front cover28
Reversible chain transfer catalyzed polymerization in miniemulsion systems with tetraiodomethane as a catalyst27
Aldehyde end-capped CO2-based polycarbonates: a green synthetic platform for site-specific functionalization27
Front cover27
Construction of fully π-conjugated, diyne-linked conjugated microporous polymers based on tetraphenylethene and dibenzo[g,p]chrysene units for energy storage27
Contents list27
Propagation rate coefficients of 2-(dimethylamino)ethyl methacrylate radical polymerization in bulk, alcohols and alcohol/water solutions determined by PLP-SEC27
Back cover27
Precision synthesis for well-defined linear and/or architecturally controlled thermoresponsive poly(N-substituted acrylamide)s26
Pillar[5]arene based supramolecular polymer for a singlet oxygen reservoir26
Catechol-free ternary random copolymers for strong and repeatable underwater adhesion26
From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications26
Front cover25
Sulfur-containing block polymers from ring-opening copolymerization: coordinative encapsulants for transition metals25
Contents list25
Back cover25
Amphiphilic block-random copolymer stabilisers: extension to other monomer types25
Evolution and recent progress of non-spherical chiral micro- and nanoparticles: preparation, design, and advanced applications25
Front cover25
Back cover24
Inside front cover24
Front cover24
Back cover24
Contents list24
Contents list24
Inside front cover24
Front cover24
Back cover24
Back cover24
Contents list24
Front cover23
Back cover23
Back cover23
Front cover22
Back cover22
Front cover22
Back cover22
Back cover21
Contents list21
Outstanding Reviewers for Polymer Chemistry in 202121
Back cover21
Front cover21
Contents list21
Front cover21
Front cover21
Back cover21
Contents list21
Back cover21
Back cover20
Back cover20
Front cover20
The origin of the thermally stable white-light emission property of POSS-conjugated polymer hybrid films20
Revisiting polymer coatings on nanoparticles: correlation between molecular weight and coating thickness in chain transfer polymerizations20
Contents list20
Contents list20
Front cover20
A one-component phosphonium borane Lewis pair serves as a dual initiator and catalyst in the ring-opening alternating copolymerization of anhydrides and epoxides20
Pyrene- and 1,3,5-triazine-based D–A two-dimensional polymers for sunlight-driven hydrogen evolution: the influence of the linking pattern19
Redox-triggerable firefly luciferin-bioinspired hydrogels as injectable and cell-encapsulating matrices19
Disulfide bond-embedded polyurethane solid polymer electrolytes with self-healing and shape-memory performance19
Multicomponent chiral hydrogel fibers with block configurations based on the chiral liquid crystals of cellulose nanocrystals and M13 bacteriophages19
Dendritic polyphenylene AIEgens: fluorescence detection of explosives and stimulus-responsive luminescence19
Facile synthesis of monocyclic, dumbbell-shaped and jellyfish-like copolymers using a telechelic multisite hexablock copolymer19
A dual-initiating organic frustrated Lewis pair catalyst for living polymerizations of (bio)acrylates to facilitate the synthesis of metal-free multiblock copolymers18
Synthesis and properties of ABA-triblock copolymers from polyester A-blocks and easily degradable polyacetal B-blocks18
Glaser coupling for the synthesis of transformable polymacrocyclic polymers18
Differences and similarities between mono-, bi- or tetrafunctional initiated cationic ring-opening polymerization of 2-oxazolines18
Two luminescent film sensors constructed from new lanthanide coordination polymers for ratiometric detection of Zn2+ and NH3 in water and their white emission properties18
Progress in the design and synthesis of biobased epoxy covalent adaptable networks18
Long afterglow epoxidized soybean oil polymer composites with reversible dynamic cross-linking for intelligent coating18
Exploiting the network architecture of thiol–ene photo-crosslinked poly(ε-caprolactone) towards tailorable materials for light-based 3D-printing18
Recyclable silicone elastic light-triggered actuator with a reconfigurable Janus structure and self-healable performance18
Effect of macromonomer chemical structure on the rate of grafting-through ring-opening metathesis polymerization18
Direct heteroarylation polymerization of a π-conjugated polymer with degradable 1,2,4-oxadiazole linkers18
Hybrid copolymerization of acrylate and thiirane monomers mediated by trithiocarbonate18
Preparation of core–shell nanoparticlesviaemulsion polymerization induced self-assembly using a maleamic acid-α-methyl styrene copolymer as a macro-initisurf18
Synthesis of micrometer-sized poly(vinyl acetate) particles through microsuspension iodine transfer polymerization: effect of iodine species in a water medium18
Controlled copolymerization of α-NCAs and α-NNTAs for preparing peptide/peptoid hybrid polymers with adjustable proteolysis17
Tunable circularly polarized luminescence of D–A type chiral conjugated oligomers via achiral donors17
Understanding the monomer deuteration effect on the transition temperature of poly(N-isopropylacrylamide) microgels in H2O17
Chain-growth click copolymerization for the synthesis of branched copolymers with tunable branching densities17
Cationic ring-opening polymerization of a five membered cyclic dithiocarbonate having a tertiary amine moiety17
Continuous synthesis of grafted polyesters through successive photocontrolled BIT-RDRP and ROP strategies in flow tube reactors17
Symmetric star poly(substituted glycolide) homopolymers and their surface properties17
High-throughput concurrent synthesis of core-crosslinked star-polydimethylsiloxane using an arm-first approach17
Water soluble non-conjugated fluorescent polymers: aggregation induced emission, solid-state fluorescence, and sensor array applications17
Branched phosphazenium salts as effective and versatile cocatalysts for epoxide/CO2 coupling17
Synthesis of poly(ethylene glycol)-co-poly(caprolactone) di- and triblock copolymers and effect of architecture, dispersity and end-functionalisation on their aqueous self-assembly17
Chemical and physical properties of low-molecular-weight poly(2,6-dimethyl-1,4-phenylene oxide) (LMW-PPO) synthesized by peroxydisulfate and metal/non-metal catalysts17
Polyimides with low dielectric constants and dissipation factors at high frequency derived from novel aromatic diamines with bistrifluoromethyl pendant groups17
Cyclopolymerizable and cyclopolymeric photoinitiators from diallyl amine and α-hydroxy ketones16
Hyperbranchedvs.linear poly(disulfide) for intracellular drug delivery16
Supramolecular polymer networks crosslinked by crown ether-based host–guest recognition: dynamic materials with tailored mechanical properties in the bulk16
One-pot preparation of polypeptide nanogels in aqueous solutionviaring-opening polymerization-induced nano-gelation16
Trifluoromethoxy-substituted nickel catalysts for producing highly branched polyethylenes: impact of solvent, activator andN,N′-ligand on polymer properties16
Luminescence property switching in 1D supramolecular polymerization of organic donor–π-acceptor chromophores16
Recent progress in the development of highly active dyeing photoinitiators based on 1,3-bis(p-substituted phenylamino)squaraines for radical polymerization of acrylates16
Nanoconfined synthesis of conjugated ladder polymers16
A3B-type miktoarm star polymer nanoassemblies prepared by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization16
Fully biomass-based biodegradable polymers from lignin and raw castor oil: lignin-graft-castor oil16
3D printed objects obtained by combination of radical photopolymerization and photo sol–gel reaction: towards reinforced thermomechanical properties16
Poly(oxanorbornene)s bearing triphenylphosphonium and PEGylated zinc(ii) phthalocyanine with boosted photobiological activity and singlet oxygen generation16
Molecular-level insight into the low-k properties and regulatory mechanisms of polybenzoxazines16
Polar additive triggered chain walking copolymerization of ethylene and fundamental polar monomers16
Polyurethane elastomers with amphiphilic ABA tri-block co-polymers as the soft segments showing record-high tensile strength and simultaneously increased ductility16
Multifunctional porous organic polymers as ideal platforms for gas uptake, metal-ions sensing, and cell imaging16
Facile grafting modification of main-chain-type semi-fluorinated alternating fluoropolymersviasimultaneous CuAAC reaction and ATRP in one pot at ambient temperature16
Facile access to diverse polyethylenesvianeutral salicylaldiminato nickel catalysts16
From plastic to elastomers: introducing reversible copper–thioether coordination in CO2-based polycarbonate16
Polyethylene and poly(ethylene-co-vinyl acetate) star polymers by iodine transfer polymerization16
Back cover15
Back cover15
Control over membrane fluidity and biophysical properties of synthetic terpolymer stabilized complex coacervates15
Controllable and facile synthesis of poly(2-oxazoline)s using trimethylsilyl trifluoromethanesulfonate as the initiator15
[Ru]-Catalyzed olefin metathesis and ethenolysis for the synthesis and recycling of bio-based polycarbonates and polycyanurates15
Hexacyclotetradecenes as polycyclic fused exo-norbornene monomers: synthesis of cyclic olefin copolymers via Ti-catalyzed controlled polymerization15
Synthesis of poly(l-lactide)-b-poly(amino acid) block copolymers by noncovalent protection of hetero-initiators15
Back cover15
Comment on “Limonene as a renewable unsaturated hydrocarbon solvent for living anionic polymerization of β-myrcene” by A. Dev, A. Rösler and H. Schlaad, Polym. Chem., 2021, 12, 308415
A tridentate phenoxy-phosphine (POP) divalent chromium complex and its reactivities in olefin polymerization15
Well-defined amine-reactive polymethacrylates through organocatalyzed controlled radical polymerization15
Fabrication of nano-objects with morphology-correlated room-temperature phosphorescence and their application in information encryption15
Synthesis of polyimides containing Tröger's base and triphenylmethane moieties with a tunable fractional free volume for CO2 separation15
Contents list15
Multiblock copolymer synthesis via aqueous RAFT polymerization-induced self-assembly (PISA)15
Artificial supramolecular light-harvesting systems based on a pyrene derivative for photochemical catalysis15
Synthesis of furan-based conjugated polymers with tunable bandgaps via direct C–H arylation of oligofurans15
Versatile fully-substituted triazole-functionalized polypeptides with a stable α-helical conformation for gene delivery15
Leveraging the monomer structure for high-performance chemically recyclable semiaromatic polyesters15
A cyclopolymerizable, doubly Irgacure 2959 functionalized quaternary ammonium salt photoinitiator and its water-soluble copolymer with diallyldimethylammonium chloride14
Photomediated RAFT step-growth polymerization with maleimide monomers14
Converting high modulus water-based elastomeric core–shell nanoparticle films from viscoelastic to predominantly elastic using di-epoxide crosslinking14
Model reactions for the evaluation of poly- and multifunctional molecules as potential interfacial agents for the compatibilization of polyethylene/poly(ethylene-co-vinyl alcohol) blends14
Synthesis of a renewable bisguaiacol amide and its hydrogen bonding effect on enhancing polybenzoxazine performance14
Fluorine-containing nano-objects with the same compositions but different segment distributions: synthesis, characterization and comparison14
Constructing low-kpolymers at high frequency from two propenyl-containing biomasses through the grubbs reaction14
Towards the synthesis of polythiazolines: a post-polymerization approach14
Effect of architecture on the thermo-induced phase transition of methacrylate-based symmetric pentablock terpolymers14
Design of ester crosslinked rubber with high dynamic properties by increasing dynamic covalent bond density14
Pillar[5]arene-based supramolecular gel: construction and applications14
Crosslinking of poly(n-butyl acrylate)-POSS copolymers via dynamic urea exchange enables self-healing, reprocessing and shape recovery14
Gelation-free synthesis of high-molecular-weight hyperbranched aromatic polymers containing silicon by Suzuki–Miyaura polycondensation of tri- or tetra(bromoaryl)silane with arylenediboronate14
Tuning “ligandless” direct arylation polymerization toward less-branching EDOT polymers14
Controlling thiyl radical polymerization via in situ desulfurization14
Glycidyl ethers from acyclic terpenes: a versatile toolbox for multifunctional poly(ethylene glycol)s with modification opportunities14
The CF3TMS adduct of anthraquinone as a monomer for making polymers with potential as separation membranes14
Synthesis and properties of 2,6-azulene-based conjugated polymers and their applications in dispersing single-walled carbon nanotubes14
Structure, humidity adaptivity, and elasticity of hydrogen-bonded complexes formed by self-assembly of a triblock copolymer and a homopolymer14
Lithium anthraquinoids as catalysts in the ROP of lactide and caprolactone into cyclic polymers14
Glutathione-triggered biodegradable poly(disulfide)s: ring-opening copolymerization and potent antibacterial activity13
Triphenylamine side chain enabled polybenzodithiophene wide-bandgap donors for efficient organic solar cells13
Diversity-oriented synthesis of chemically recyclable poly(sulfonamide ester)s through organocatalytic aziridine-based multicomponent polymerization13
Cosolvent effects on the structure and thermoresponse of a polymer brush: PNIPAM in DMSO–water mixtures13
High-performance boron-containing phthalonitrile resins13
Synthesis of poly(3-hexylthiophene)-block-poly(phenylisocyanide) copolymers and their self-assembly in solution13
Melt polycondensation of 2,5-tetrahydrofurandimethanol with various dicarboxylic acids towards a variety of biobased polyesters13
Polyester networks from structurally similar monomers: recyclable-by-design and upcyclable to photopolymers13
Bio-photo-Fenton-like RAFT polymerization under blue light13
Reusable polymer brush-based photocatalysts for PET-RAFT polymerization13
Bioactive polyethylene synthesized by ring opening metathesis polymerization for potential orthopaedic applications13
Nucleophile responsive charge-reversing polycations for pDNA transfection13
AnN-oxide containing conjugated semiconducting polymer with enhanced electron mobilityviadirect (hetero)arylation polymerization13
Synthesis of helically π-stacked poly(quinolylene-2,3-methylene)s with anthracene derivatives at the chain end: intramolecular energy transfer based on the π-stacked architecture13
Vinylene-linked fully conjugated porous organic polymers based on difluoroboron β-diketonate complexes for green and efficient photocatalysis13
Disulfide-containing monomers in chain-growth polymerization13
Poly (aryl sulfone)s containing 5,11-dihydroindolo[3,2-b] carbazole moieties in the main chain: non-conjugated blue-light-emitting materials13
Customized thermoplastic polyhydroxyurethanes synthesized from ene-containing cyclic carbonates, dithiols and diamines: design, mechanical properties and applications in adhesives13
Amphiphilic tetra-PCL-b-PEG star block copolymers using benzoxazinone-based linking groups13
Cu(0)-RDRP of acrylates using an alkyl iodide initiator13
Effect of N-alkylation in N-carboxyanhydride (NCA) ring-opening polymerization kinetics13
Reversible aminolysis: a new concept for postpolymerization modification13
Exploring SiliaCat Pd-DPP as a recyclable heterogeneous catalyst for the multi-batch direct heteroarylation polymerization for P(NDI2OD-T2)13
Synthesis of periodic polyolefins based on anionic alternating copolymerization13
Synthesis and living crystallization-driven self-assembly of backbone asymmetric and symmetric π-conjugated oligo(p-phenylene ethynylene)-based block copolymers13
Facile synthesis, structure and properties of CO2-sourced poly(thioether-co-carbonate)s containing acetyl pendants via thio-ene click polymerization12
A new recyclable polymer based on Diels–Alder crosslinking networks derived from anisaldehyde12
Efficient all polymer active layers with long-range ordered 1D p–n nanoheterojunctions confirmed by TEM tomography12
A fast and efficient way of obtaining the average molecular weight of block copolymers via DOSY12
Organocatalytic synthesis of poly(hydroxymethylfuroate) via ring-opening polymerization of 5-hydroxymethylfurfural-based cyclic oligoesters12
High-efficiency solution-processed green thermally activated delayed fluorescence OLEDs using a polymer-small molecule mixed host12
Next generation strategy for tuning the thermoresponsive properties of micellar and hydrogel drug delivery vehicles using ionic liquids12
Synthesis of double-bond-containing diblock copolymers via RAFT polymerization12
The bulky Pd-PEPPSI-embedded conjugated microporous polymer-catalyzed Suzuki–Miyaura cross-coupling of aryl chlorides and arylboronic acids12
Sulfur-rich polymers with heating/UV light-responsive shape memory and temperature-modulated self-healing12
Poly(Piloty's acid): a slow releasing macromolecular HNO donor12
One-pot cascade polycondensation and Passerini three-component reactions for the synthesis of functional polyesters12
A universal polymer precursor strategy for precise synthesis of uniform hairy carbon dots and polymer dots12
Thermo-responsive polymer-based catalytic nanoreactors for controllable catalysis of selective oxidation of alcohols in water12
Synthesis of poly(methyl methacrylate)-b-polyethylene (PMMA-b-PE) block copolymers via conventional emulsion polymerization12
Synthesis of geometry-controlled platinum-containing polymers bearing optically active bidentate phosphine ligands12
Melt memory in propene–pentene isotactic copolymers: the case of defects hosted in the crystals12
A dual action coumarin-camptothecin polymer for light responsive drug release and photodynamic therapy12
Synthesis and depolymerization of self-immolative poly(disulfide)s with saturated aliphatic backbones12
PiPo: random copolymers of C- with N-substituted glycines12
Precise synthesis of high Tg adamantane-containing polystyrene derivatives via anionic polymerization12
Ring-opening polymerization of β-thiobutyrolactone catalyzed by phosphazenes12
Balance of the steric hindrance and solubility of alkoxy ligands for ultrahigh-activity molybdenum-based butadiene coordination polymerization12
Flow synthesis of conjugated polymers: exploring the effects of solvent and catalyst on molecular weight12
Bottlebrush polymer with dual functionality for osteoarthritis treatment: curcumin delivery and lubrication properties12
Polymer grafting on nitrone functionalized green silica viagrafting from” and “grafting to” approaches through enhanced spin capturing polymerization and a 1,3-dipolar cycloaddi12
Cationic polymerization of butadiene using alkyl aluminum compounds as co-initiators: an efficient approach toward solid polybutadienes12
0.12923502922058