Functional Materials Letters

Papers
(The median citation count of Functional Materials Letters is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Fabrication of Pd–Ni/Au nanoshelled microsphere array for electrocatalytic oxidation of methanol25
Low-field 1H NMR relaxometry of water molecules confined in microporous UiO-6621
Synthesis of magnetron sputtered AgBiS2 thin films18
Ag/Co/B tri-doped TiO2/SiO2 film for enhancing photocatalytic degradation17
Photoelectric activity evaluation of surface-loaded ferroferric oxide/titanium dioxide composite prepared from ilmenite15
Structural regulation of CuOx/CeO2 and its application in α-tert-propylamine synthesis14
Nanocrystallized copper phosphate endowed with photothermal conversion and photoacoustic imaging capabilities13
MXene for aqueous zinc-based energy storage devices13
Hydrothermal synthesis and characterization of Sn–ZnO nanorod array coatings12
Secondary granulation-assisted CVD growth of WS2, TiS2 and NbS2 crystals11
Structural and optical properties of ionic liquid-based hybrid perovskitoid: A combined experimental and theoretical investigation11
Study of humidity sensing properties in ZnO nanotubes grown via hydrothermal method8
Comprehension of defect states induced by fluorine ions substituting for oxygen ions in Sr3MgSi2O8−δF2δ by first principles calculation8
Tuning dielectric properties of sputtered BaTiO3 thin film capacitors via multilayering with SrTiO38
Effects of hole transport and energy barrier on the width of the exciton formation zone in organic light-emitting diodes8
On behaviors of porous shape memory polymer under different loading conditions8
Investigation on the influence of Zn content on the structural, optical, morphological and electrical properties of ternary compound Cd1−xZnxS window layer for CdTe solar cell7
Liquid-phase oxidation synthesis of WS2 –WO3 particles with enhanced gas sensing performance7
Synthesis of 2D type A molecular sieves by alkaline removal of natural kaolin7
Author index Volume 16 (2023)7
Influence of LiBF4 sintering aid on the grain boundary and conductivity of LAGP electrolyte7
Adsorption of PPL on a high thermal stable DUT-5 and their catalytic activity in a transesterification reaction of cinnamyl alcohol and vinyl acetate7
Metastable polymorphs and luminescence of boehmite-derived alumina doped with divalent europium ions7
Carbon nano-onion as next-generation functional nanomaterial: Synthesis methods and practical applications7
Ferromagnetism properties ofCarbonco-doped LiMg(Fe, Ni)P half Heusler using DFT method7
Fabrication of flame-retardant PA6/three-dimensional braided glass fiber composites via in situ polymerization6
Synthesis and characterization of CIS/CISe core–shell structured quantum dots in green systems6
CdS@CS/PVA inverse opal films as photocatalyst6
A novel surface modification strategy for Li-rich Mn-based layered oxide cathodes of high-capacity and high-cyclic stability by an additive of LiBH4 to the electrolyte6
In situ preparation of two-dimensional mortise and tenon structure g-C3N4/MoO3 photocatalyst for the reduction of aqueous Cr(VI)6
Wide-spectrum detector based on hierarchical flower-like In2S3 nanostructures by solvothermal process6
Mg-assisted reduced graphene oxide fabrication under microwave irradiation of a natural source of carbon6
Bifunctional MnOx electrocatalysts for zinc–air batteries in alkaline electrolytes6
Tunable electromagnetic interference shielding ability of MXene/chitosan/silver nanowire sandwich films6
Spray pyrolysis–deposited NiO film as a hole-injection layer for CsPbBr3 nanocrystal-based light-emitting diodes6
Preparation of hollow nanoarrays by instantaneous Joule heating stretching and the application in sensing5
Effect of annealing time on solid solution microstructure and memory properties of additive Fe-Mn-Si-Cr-Ni alloy5
Extraction of lithium in salt lake brine through highly selective titanium ion sieves - A review5
Catalytic oxidation of toluene over ZIF-8 composited with Mn by different methods5
A gram-scalable and air-stable 2,2-diphenyl-1,3-dithiolane-bridged bis-1, 8-naphthalimide fluorescent probe for efficient Hg2+ detection5
Photocatalytic performance of BaTi5O11 nanocrystals synthesized by sol–gel method for methylene blue degradation5
Optimizing the thermoelectric properties of flexible Bi0.5Sb1.5Te3 thin films via modulating magnetron sputtering power5
In situ fabrication of Cu2O array electrode for efficient detection of acetaminophen5
High efficient and stable photocatalyst CeO2/ZnO for tetracycline degradation5
Generation of stable femtosecond pulses using MoS2−xSex as the saturable absorber in Er-doped fiber laser4
Effects of thermal misfit strains on dielectric features of sandwich barium strontium titanate multilayer thin films on metal plates4
Simulation and fabrication of titanium dioxide thin films for supercapacitor electrode applications4
Preparation and characterization of Si-doped LaAlO3 solid electrolyte for IT-SOFCs4
A flexible thermoelectric film based on Bi2Te3for wearable applications4
Methanation of carbon dioxide over zirconium-tin oxide-based catalyst4
Checkerboard-like structure in columnar W–Mo thin films4
Effects of experimental conditions on the growth of g–C3N4 nanocones by plasma sputtering reaction deposition4
Hot pressing process ameliorates internal defects of PBZ/PVDF composite film for a high electrocaloric effect near room temperature4
Electrical performance study of carbon-based memristor with additional MXene capping layer4
Three-dimensional chitosan/graphene aerogel with vertical alignment for high-performance all-solid-state supercapacitors4
Enhanced photocatalytic activity in Pr3+-doped Bi2WO6 through Nd3+ co-doping4
Heteroatom (N, P)-driven carbon nanomaterials for high-energy storage in supercapacitors4
Transformation of Schwertmannite to erdite nanorod via an alkaline dissolution–recrystallization process for the effective adsorption of oxytetracycline4
Influence of doping Sn direction and concentration on vanadium pentoxide based on density functional theory4
Modification of pre-oxidized polyacrylonitrile fibers as chelating sorbents for removal of Copper(II) ions4
Synergistic effect between flake graphite and small-sized graphene in lithium storage4
Editorial — Nano-Architecture for Next-Generation Functional Materials: Influence, Trends and Prospects4
Designing PEDOT-modified V6O13 nanosheet arrays for sodium storage4
Detection of silver cation based on phenothiazine derivative probe3
Editorial: Solid-state electrolytes and solid-state batteries for next-generation energy storage3
Enhanced dielectric responses of Ba0.6Sr0.4TiO3 thin films onto BaxSr1−xTiO3-buffered stainless steel substrates3
Fabrication and electrochemical performance of Si@Polyaniline-based activated-carbon composites3
The effect of chaos circuits on the polymorphs of electrolytic manganese dioxide3
I – V Characteristics of Hf0.5Zr0.5O2 films prepared via sol–gel and pulsed laser deposition methods3
Facile synthesis of Ni foam-supported prickly Au nanoparticles by galvanic displacement for electrocatalytic oxidation of glycerol3
Effect of Cu and MWCNT doping in ZrO2 for visible light photodegradation of methylene blue3
Photocatalytic activity of BaTi5O11 nanocrystals synthesized by hydrothermal method3
Constructing MXene-/coconut-derived carbon composite as a robust anode material for enhanced lithium storage3
Facile synthesis of spherical Li3V2(PO4)3/C and 2LiVPO4F⋅Li3V2(PO4)3/C cathode materials by spray drying for lithium-ion battries3
Electrical creep and fatigue in 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 ceramics3
Advances in molecular dynamics simulation on heterogeneous nucleation of gas hydrate3
A co-effective strategy to improve the energy storage performance and the electrocaloric effect of ceramic: Using strain-modified calcined powders as sintering precursor3
Deciphering and suppressing the cathode dissolution catastrophe in aqueous rechargeable dual-ion battery3
PVA-assisted synthesis of Zn2SiO4: Mn2+ nanoparticles: Enhanced luminescence properties and applications3
Porous pyroelectric material for waste heat harvesting3
Lithium storage properties of Li2MoO3 and its effect as a cathode additive in full cells3
Low-temperature synthesis of oxygen-rich fish-scale-like porous boron nitride for effective water cleaning3
Facile fabrication of NF-loaded Co3O4 monolithic catalyst and its application in the reduction of P-nitrophenol3
Effect of Eosin Y on the photocatalytic H2 production of the 3D ZnO/ZnS sheet@ZnO/ZnS nanotube hybrids3
A facile method for preparation of porous nitrogen-doped Ti3C2Tx MXene for highly responsive acetone detection at high temperature3
A review on advanced optimization strategies of separators for aqueous zinc-ion batteries3
Effects of substrate temperature and sodium source temperature on Na doping of ZnO by MOCVD3
Effect of Zn addition on electrophysical properties of nickel ferrite thin films3
Synergistic carbon coating of Ni-MOF on SiOx for high-performance lithium-ion batteries3
An in-situ catalytic-insoluble strategy enabled by sulfurized polyacrylonitrile-based composite cathode for potassium–sulfur batteries3
Optimization of polymer incorporation in MOF via solvent exchange activation3
The structure control of MoC optimizes charge transfer to improve solar cell performance3
A microsphere-structure flexible pressure sensor for monitoring keyboard typing behavior3
One-step assembly of bimetal-phenolic networks for antifouling and antibacterial coatings2
Direct decomposition of N2O over Co3O4/ZrSn1−xFexO4−δ catalysts2
The effects of solvent viscosity on the morphology and photocatalytic activity of BiOBr catalysts2
Using click chemistry to study the photoacoustic effect of near-infrared captivating pyrene derivatives2
Ultrasonic synthesis of perovskite-type BaCeO3/Fe2O3 composites with enhanced photocatalytic degradation of Rhodamine B2
A novel temperature-stable (1−m)Li2TiO3mZn3Nb2O8 microwave dielectric ceramic2
Recent research progress on Li29Zr9Nb3O40-based solid electrolytes for lithium batteries2
Preparation and properties of Y, Mn-doped LMO solid electrolyte for IT-SOFCs2
Hybrid multilayer magnetoelectric coupling based on magnetostrictive materials2
Exploring the growth of MAPbI3 under different preparation methods for mesoporous perovskite solar cells2
Effect of TiO2 layer thickness on the energy conversion efficiency of dye-sensitized solar cells2
NASICON-structured Na ion conductor for next generation energy storage2
Effect of doping polyethylene oxide on the properties of Nafion-IPMC actuators2
Structural and superconducting properties of Nb3Sn film for superconducting radio-frequency cavities synthesized via bronze route2
V2C-based lithium batteries: The influence of magnetic phase and Hubbard interaction2
Rational design of catalysts towards energy-saving formaldehyde oxidation: A review2
Enhanced thermoelectric performance of stibium and bismuth co-doped SnTe via melt spinning2
Mechanochemical synthesis of Li2OHI with enhanced lithium ionic conductivity2
Novel WO3-PEDOT core–shell inverse opal films with enhanced electrochromic performance for smart windows2
Preparation of Ag/SAPO-34 zeolite photocatalyst2
Artificial neural network (ANN)-based optimization of a numerically analyzed m-shaped piezoelectric energy harvester2
Design of a playable spherical grip strength detection system based on a PVDF flexible sensor2
Interface construction for charge transportation of ZnO/graphene multilayer films2
Enhancing structural, thermal, and electrical properties of plasticized lithium-based PVdF-HFP polymer electrolytes for flexible energy storage applications2
Ethanol monitoring gas sensor based on Co2P nanomaterials by a facile hydrothermal approach2
Lignocellulose-based gel polymer electrolyte composited by a special additive of elemental sulfur with outstanding performances in lithium–sulfur batteries2
Erratum: Effect of doping polyethylene oxide on the properties of Nafion-IPMC actuators2
Single atom-based electrodes for alkali metal-ion batteries: Current progress and future perspectives2
High thermoelectric properties of P-SiGe/Sr0.9La0.1Ti0.9−xZrxNb0.1O3 composite2
The CoFe-LDH/CuCo2O4 composite as an efficient bifunctional electrocatalyst under alkaline conditions for overall water splitting2
Synthesis and characterization of a β-ketoenamine COF Tp-BD(Me)2 at mild temperatures2
Erratum: Lithium phosphosulfide electrolytes for solid-state batteries: Part I2
γ-phase evolution in aged Co–Ni–Ga shape memory alloy2
Structural and electrochemical characterization of Li2O–V2O5–Fe2O3 amorphous cathode material for lithium-ion batteries2
Synthesis of narrow-band red-emitting SrLiAl3N4:Eu2+ phosphor and the study of its influencing factors on luminescence performance2
N/O co-doped carbon nanocapsule anodes for high rate-performance K-ion batteries2
Bipolar resistive switching in MAPbI3−xClx mixed halide perovskite with polyvinylpyrrolidone additives2
Pitaya peel derived carbons with ultra-high specific surface area for solid-state flexible asymmetric supercapacitors2
Sustainable synthesis of quaternary vanadate nanoparticles for efficient room-temperature detection of formaldehyde via disposable chemiresistive sensing2
Microwave hydrothermal synthesis and antibacterial activity of cocklebur-shaped Cu4O3 microparticles2
Research on the application of WO3 gas sensor based on noble metals modification in cable fire detection2
Exploring electronic, optical, and phononic properties of MgX (X = C, N, and O) monolayers using first principle calculations2
Preparation and photoluminescence study of rare-earth-free red emitting La3Ga5SiO14:Mn4+ phosphors2
A highly sensitive quartz crystal microbalance sensor assisted with ZnO nanosheets for nerve agent detection1
PtTiCe/C catalyst prepared by electrochemical dealloying for hydrogen evolution reaction1
Enabling superior sodium storage behavior of MoS2 in ether-based electrolytes1
Tunable luminescence and cytotoxicity of Samarium-doped calcium–strontium–hydroxyapatite for cell imaging1
Multicomponent nickel-based phosphide catalyst for overall water splitting1
Editorial: Introduction to the Special Issue on Interface-Structural Materials for Catalysis and Energy1
Lithium phosphosulfide electrolytes for solid-state batteries: Part II1
Microstructures and electromagnetic interference shielding properties of 2D defective Mo1.33C (MXene)1
Effect of Pr6O11 addition on the electrical properties of Sm0.2Ce0.8O1.9 electrolyte materials for solid oxide fuel cells1
Low-cost and scalable preparation of nano-Si from photovoltaic waste silicon for high-performance Li-ion battery anode1
Impedance analysis of PEG plasticized PEO-based composite polymer electrolytes for sodium-ion batteries1
Mechanochromic behavior of a pyridine-containing pyrene derivative1
Strategies to increase the stability and energy density of NVPF– A comprehensive review1
Fabricating waxberry-shaped N–C–TiO2 composite with excellent visible light catalytic activity1
Tris(trimethylsilyl) phosphite (TMSPi) as an electrolyte additive for LiNi0.5Co0.2Mn0.3O2 cathode materials at elevated voltage and temperature1
NiS nanosheets synthesized by one-step microwave for high-performance supercapacitor1
High efficient electrocatalytic performance of nitrogen-doped carbon nanosphere-loaded platinum composite in DMFCs1
Facial synthesis of Cu@Ag core-shell particles through temperature gradient method with excellent oxidation resistance1
Integrately design hybrid lithium-air battery based on the nasicon solid electrolyte and zinc single atoms electrochemical catalysts1
On the successful growth of bulk gallium oxide crystals by the EFG (Stepanov) method1
Revisiting polyanionic LiFePO4 battery material for electric vehicles1
Polymer-based temperature sensors: Materials design, synthesis, characterization, and biomedical applications1
Electrospun Ba(Ti0.80 Zr0.20)O3-0.5(Ba0.70Ca0.30)TiO3-CoFe2O4 multiferroic hybrid nanofiber for the localized piezocatalytic degradation of organic pollutants1
Growth of MoS2 and metal back electrode-dependent performance of MoS2/Si heterojunction solar cells1
Development of La–graphene composite contrasting agents for photon-counting computed tomography1
Lithium phosphosulfide electrolytes for solid-state batteries: Part I1
Applications of surface modification trititanate nanotubes as PEC and hydrogen production device material1
Improvement of hydrogen evolution catalytic performance of MoS2 nanoflowers by constructing MoS2/MXene Ti3C2 heterostructure petals1
Modeling the effect of surfactant (linoleic acid/oleic acid/stearic acid) on the stability of kerosene-based magnetic fluid with Fe3O41
Review on bimetallic catalysts for electrocatalytic denitrification1
Decorating Pt nanoparticles on oxygen vacancies incorporated hematite photoanode for enhanced water oxidation1
Fluorescent material based on Al-MOF and phenazine groups for detection of water content in organic solvents1
Enhancement effect of nonferromagnetic particles on the viscosity of magnetorheological fluid under a dynamic magnetic field1
Controllable synthesis and magnetization of Fe3O4 microspheres wrapped with amorphous carbon1
Molecular dynamics simulations of amorphous NaFePO4 as an Na-ion battery cathode material1
Vanadium pentoxide-coated smart windows for passive radiative cooling applications1
Potassium oleate as an effective interface modifier for defect passivation in planar perovskite solar cells1
Preparation of F/Mn-doped CsPb(Br/Cl)3 quantum-dot glass and their luminescence properties1
Cysteine assisted synthesis of Bi2S3/BiOBr nanocomposites for photocatalytic decomposition of rhodamine B1
Preparation and photocatalytic degradation performance of AgI/4A molecular sieves1
Enhancing optical properties and wettability of colorless polyimide films by direct fluorination1
Preparation of 2D/2D g-C3N3/g-C3N4 Heterojunctions for Enhanced Photocatalytic Hydrogen Production1
Enhanced durability of cyclometalated Ir(III) photosensitizer through intramolecular π–π interaction for robust photocatalytic hydrogen evolution1
Photocatalytic properties of Ce-doped TiO2 nanomaterials for targeted dye removal1
Synthesis, microstructure and ionic conductivity of Li1+xAlxTi2−x(PO4)3-based composite ceramic electrolyte1
Ethyl cellulose–graphene oxide composite dense membranes: Kinetic and thermodynamic studies of dye adsorption1
Hydrogen peroxide electrochemical sensor based on gold nanoparticles modified with nitrogen-doped and nanoperforated graphene nanozymes1
The effect of Y, Er co-doped on the sintering and electrical properties of Mo0.05 Bi1.95O3 electrolyte materials for solid oxide fuel cells1
Fabrication and optical characterization of GaN quasi-phase matching crystal by double polarity selective area growth in metal organic vapor phase epitaxy1
Preparation of novel azobenzene derivatives/potassium niobate nanocomposite and its application in electrochemical sensors1
Resistive switching of Pt/Nb: SrTiO3 and La0.7Sr0.3MnO3/Nb:SrTiO3 structures1
Field emission characterization of nanoFEAs on single crystal CeB6 surface fabricated by focused ion beam milling1
Pt supported on ZrSn1−xSrxO4−δ for catalytic liquid-phase oxidation of phenol1
One-step route for Z-scheme Al2(WO4)3/Bi2WO6 heterojunction toward superior photoelectric and photocatalytic performance1
Carbon-coated TiNb2O7 microspheres with partial nitridation for high-performance lithium storage1
Hydrothermal synthesis and optical luminescence center attribution in samarium-doped zirconia nanocrystals1
Visible-light-driven peroxymonosulfate activation by porous sulfur-doped g-C3N4 for the removal of organic contaminant1
Fabrication and characterization of InN-based metal-semiconductor-metal infrared photodetectors prepared using sol–gel spin coated technique1
Recovery of lithium hydroxide monohydrate from a nickel-rich cathode material by a novel heat-treatment process at a significantly low temperature1
Highly improved photoluminescence properties of novel ternary Eu(cpioa)phen metal–organic frameworks1
Improved artificial photosynthesis with InGaN NCs/InGaN/GaN electrodes1
Highly porous P(DVB-AMPS) copolymer with tailored surface engineering for efficient fluoride capture from water1
SiOx/CNTs/Sn composite as high-performance anode material for lithium-ion batteries1
A review on cerium-containing electrocatalysts for oxygen evolution reaction1
Selective conversion of ethylene to propylene over rhenium-containing heterogeneous catalysts0
Development of self-activated photoluminescent amorphous magnesium phosphate via microwave-assisted synthesis and structural de-watering0
Indoloquinoxaline-based organic material enabling multi-stimuli response0
Gel polymer electrolyte combined lignocellulose with sodium alginate in lithium-ion battery0
On the performance of carbon fiber structural batteries with temperature0
Design and structural features of magnetic cobalt ferrite nanoparticles in a biopolymer matrix0
Self-supported TiO2@P nanotube arrays as high-performance anodes for sodium-ion batteries0
Thermal and electrical characteristics of praseodymium-based perovskites as a function of iron and cobalt substitution0
Phase structures and magnetostriction of Fe71.3Ga28.7 alloys prepared by different solidification rates0
TiO2/C aerogel composites as high-performance electrode materials for supercapacitors0
Facile synthesis of nitrogen-doped graphene, and its advanced electrochemical activity toward efficient lithium ion storage0
Phase transition and luminescent properties of the Eu3+ ions-doped NaYF4:Yb, Er nanoparticles0
Synthesis of vanadium-doped Ti3C2Tx MXene for enhanced lithium storage0
Preparation and electromagnetic wave absorption properties of CAU-Al MOF and graphene oxide aerogel composites0
Fabrication of SiO2nanofiber-integrated all-inorganic electrodes for safer Li-ion batteries0
Author index: Volume 15 (2022)0
Magnetic/conductive biochar frames derived from Fe3O4-coated loofah sponges for green electromagnetic interference shielding application0
Enhancement of the properties of a Beta-GA2 O3-based diode using fluorine-doped Ga2O3 films deposited by a liquid-phase method0
MoC@C/RGO with nano-restricted area structure for active electrode in supercapacitor0
Photoluminescent properties and luminescent thermal stabilities of 100 mol% activator Tb2(MoO4)3 green phosphor0
Facile morphological construction of VO2 and its application in aqueous Zn-ion batteries0
A recyclable and efficient magnetic photocatalyst-Bi5O7I/SrFe12O190
Efficient degradation of RhB by Fe-N-TiO2 through photocatalytic synergistic persulfate system0
Potential applications of POSS-based fluorescent materials in fingerprint developments0
Fabrication and multiphysics numerical investigations of carbon fiber structural batteries0
Influence of the nanogrinding process on the performance of lithium iron phosphate0
Coppers film fabrication on glass substrate by complex reduction method for rapid inactivation of SARS-CoV-2 (COVID-19)0
A nonflammable liquid electrolyte for lithium-metal battery0
A dual-emission ratiometric luminescence probe based on Zr-MOFs for the efficient detection of Cu2+ in aqueous solutions0
Preparation of SnO2/TiO2 composite photocatalysts using yeast and their catalytic performance0
Hierarchical HAp–AuNR hybrid microspheres as pH/NIR sensitive drug carrier for photothermal/chemo synergic therapy0
Thermally stable single atom catalysts: From concept to in situ study0
Synthesis and luminescent properties of Eu3+ organic complex PVA encapsulation film0
Electronic properties of individual CsPbI2Br nanocrystals investigated by LT-STM0
Editorial: Introduction to the Special Issue on Energy Storage and Conversion0
Fabrication and improved photocatalytic performance of 2D/0D structured g-C3N4/WO3 composite materials0
Constructing a composite lithium anode for high-performance solid-state lithium–metal batteries via in-situ alloying reaction0
Modulation mechanism of electronic and optical properties of Cs2SnX6 (X = Cl, Br and I) under hydrostatic or uniaxial pressure0
Preparation and properties of LSMW–CSPG solid composite electrolyte for IT-SOFCS0
Phase diagrams of bismuth ferrite barium titanate thin films with misfit strains and their improved electrical properties0
Flexible strain sensor with self-healing function for human motion monitoring0
Effect size of carbon micro-nanoparticles on cyclic stability and thermal performance of Na2SO4⋅10H2O–Na2HPO4⋅12H2O phase change mater0
Dielectric relaxations in NASICON-type Li1.25Zr1.75Al0.25(PO4)3 solid electrolyte0
Facial synthesis of core-shell nickel@carbon nanocomposite for high-efficient electrochemical detection of paracetamol0
Electrochemical characterization of CuF2/CNTs cathode materials prepared by a coprecipitation method0
Rapid and controllable microwave synthesis of nickel cobalt sulfide electrodes for high-performance asymmetric supercapacitors0
Structural optimization of CO3O4 nanoparticles for enhanced energy-storage application0
Unipolar electron transport polymer semiconductor based on fluorine- and nitrogen-substituted units for field-effect transistors0
Ferroelectric properties and current mechanisms of BaTiO3/Nb:SrTiO3 thin films0
Author index Volume 14 (2021)0
0.68029713630676