Processing and Application of Ceramics

Papers
(The median citation count of Processing and Application of Ceramics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Investigation of the effect of pressure, sintering temperature and time on silicon carbide microstructure11
α-tricalcium phosphate/fluorapatite-based cement - promising dental root canal filling material10
Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol%Y2O38
Structural and ferroelectric properties (1-x)(Ba0.9Sr0.1)TiO3-xBi(Mg2/3Nb1/3)O3 lead-free ceramics with remarkable energy storage performance7
Ce0.8Gd0.2O1.9-Sr1.95Pr0.05Fe1.5Mo0.5O6-δ heterogeneous structure composite electrolyte for solid oxide fuel cells6
Influence of powder characteristics on the sintering behaviour of reactive alumina powders6
Enhanced dielectric properties and energy storage density of Mg-doped SrTiO3 nanowire films5
The effects of processing parameters on structure of mesoporous γ-alumina granules synthesized by sol-gel/oil-drop method: Modelling via response surface methodology5
Low temperature synthesis of NaSICON NaZr2(PO4)3 powders with the assistance of in situ formed mineralizer5
Performance and purification mechanism of the mullite/SiC composite filter tube membrane5
High-entropy perovskite ceramics: Advances in structure and properties5
Influence of sintering temperature on structure and mechanical properties of polycrystalline cubic boron nitride composites4
High-temperature oxidation behaviour of si3n4 nanowires with different diameters4
In situ mullite whisker network formation for high strength and lightweight ceramic proppants4
Magnetically tailored dielectric behaviour of (1-x)Ba0.98Sm0.02TiO3-xBa0.7Sr0.3Fe12O19 ceramic composites4
The influence of solvent and number of layers on the homogeneity and properties of ZnO thin films obtained by spin-coating method4
Viscosity optimisation of photosensitive al2o3 slurry for stereolithography based additive manufacturing4
Fluorine substituted hydroxyapatite microspheres: Template-free hydrothermal synthesis and sustained fluoride-releasing properties4
Green synthesis of Ba(Fe1/2Nb1/2)O3 ceramics with high dielectric constant3
Fabrication of polycrystalline cubic boron nitride composites under high pressure3
High-temperature evolution of diamond-SiC composites3
Conductivity and electrochemical stability of Li+ substituted high-entropy Lix(mM0.2Co0.2Ni0.2Cu0.2Zn0.2)1-0.5xO ceramics3
Electrical properties and electromagnetic radiation characteristics of cement/Ba0.06Bi0.47Na0.47TiO3 composites3
Sinterability and electrical characterization of BaCe0.9Y0.1O3-δ: A discussion on intrinsic liquid-phase mechanisms3
Fabrication of ZnO/SiO2 and SiO2/α-Zn2SiO4 composites with dye adsorption and antimicrobial properties3
Multi peak emission and morphological evolution of Fe-doped ZnOs nanoflowers3
Reaction sintering in compacted hydrolysed carbonated calcium phosphate3
Substituted Bi3.5Mg1.8Nb2.7O13.8 pyrochlores with transition metals (Zn, Ni and Cd): Doping mechanism, structure and electrical properties3
Electrical conductivity and electrical stability of Bi/Mg modified NiO ceramics for NTC thermistors3
Electrical and dielectric properties of Nd-doped SrBi2Ta2O9 ceramics3
Consolidation of alumina toughened zirconia by two-step sintering3
Effect of annealing temperature and cadmium doping on structure and magnetic properties of neodymium orthoferrite nanoparticles synthesized by a simple co-precipitation method3
Effect of partial substitution of Ta2O5 by ZrO2 on the structure and ionic conductivity of Li2O-Ta2O5-2 SiO2 glass and glass-ceramics2
Utilizing two-point correlation method for microstructure and mechanical evaluation of silicon nitride ceramics2
Effect of stirring rate on the size of hydroxyapatite nanoparticles synthesized by a modified heat-treated precipitation method2
Phase relations in the Nd2O3-Fe2O3 system: Structure and magnetic properties of perovskite NdFeO3 ceramics2
Preparation and performance of g-C3N4/CuS film as counter electrode for quantum dot sensitized solar cells2
Study on the microstructure, dielectric properties and phase transition behaviour of MgTiO3 and Ca0.61La0.26TiO3 mixed-phase ceramics2
Thermal fatigue characteristics of 8Y2O3-ZrO2, La2Zr2O7, La2(Zr0.7Ce0.3)2O7 and La2Ce2O7 thermal barrier coatings in duplex, multilayer functionally graded and multilayer configurations2
A novel approach to investigate oxidation behaviour and mechanical properties of CVD bilayer TiN/TiC coatings2
Microstructure, dielectric and ferroelectric properties of CaCu3-xZnxTi4-xCexO12 ceramics prepared via semi-wet route2
Enhanced green luminescence properties of cu doped ZnO nano-flowers and their improved antibacterial activities2
Fabrication of Al2O3-Nb2O5-LiF-ZrO2 FGMs by SPS method: Microstructural evaluation, dynamic and sintering behaviour2
Oxidation resistance performance of SiC-AlON ceramic composites at high temperature2
Effect of MnO2 addition on structure, electrical and optical properties of Ba(Fe0.5Nb0.5)O3 ceramics2
Preparation, performances and application of carbon-ceramic brake discs2
Study of phase evolution and dielectric properties of Sr2Mn0.7Sn0.3O42
Graded YSZ/Al2O3 nanocomposite coatings fabricated by electrophoretic deposition of Al and nanosized YSZ particles2
Investigation of mechanical properties and stored elastic energy-fragmentation of Al2O3-Cr2O3 ceramic system with increasing Cr2O3 content2
Room temperature plasticity of zirconia-yttria-titania ceramics: Experimental indications and structural modelling2
Microstructure and mechanical properties of b4c-tib2 composites reactive sintered from B4C + TiO2 precursors2
Structure, electrical and optical properties of ZnO and Cu-doped ZnO films prepared by magnetron sputtering at different H2 fluxes2
Preparation and properties of Eu3+ doped tungstate red phosphor powders2
Influence of calcination temperature on structure and multiferroic properties of barium ferrite ceramics2
Physicochemical properties of the Crofer 22 APU steel with La0.6Sr0.4Co0.2Fe0.8O3-δ protective-conductive coatings prepared by pulsed laser deposition2
Doping of alumina ceramics by manganese - thermodynamical and experimental approach2
Structure and optical properties of La-doped ZnO thin films at room temperature2
Production of tib2 coatings on graphite substrates by electrophoretic deposition in NaF-AlF3 melt1
Effect of TiH2 on microstructure of hydroxyapatite sintered at various temperatures1
Low-temperature dielectric and impedance properties of Ba1-xSrxTiO3 and BaTi1-xTaxO3 ceramics1
Starch consolidation casting of porous alumina and functional gradient porosity development1
Optimisation of piezoelectric and dielectric properties of Bi4Ti2.95W0.05O12 ceramics by Ce4+ doping1
Tailoring multifunctional performance of Dy-doped (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics via optimizing ceramic processing1
Ablation resistance of C/C-SiCo nanoporous ceramic composites with TaSi2-MoSi2-ZrB2-borosilicate glass coating1
Folding endurance of continuous silicon carbide fibres: A comparative study1
Comparative assessment of structural, magnetic and impedance properties of xLaMnO3-(1-x)BiFeO3 solid solutions1
Effect of iron source on nonhydrolytic sol-gel synthesis of Fe2TiO51
Room temperature ethanol sensors using V2O5 nanoparticles annealed at different temperatures1
Double perovskite Nd2FeTiO6 ceramics: Structural and electrical properties1
A review of the high-entropy ceramic materials for thermal barrier coatings: Design, synthesis, sintering and properties1
Characterization of grain boundary character distribution in cemented carbides via a stereological method1
Theoretical insight into structural and mechanical features of Hf0.5Ta0.5C1
Sintering behaviour and dielectric properties of BaTiO3: Effect of borax addition1
Comparison of the effects of MoSi2 and CrSi2 on sintering and properties of titanium diboride (TiB2)1
Matoa leaf extract mediated synthesis of Se-doped ZnO nanoparticles and their photocatalytic capability1
Effect of sintering temperatures on the magnetoelectric properties of Bi0.78La0.08Sm0.14Fe0.85Ti0.15O3 ceramics1
Influence of polymer synthesis route and organic fraction content on structure and porosity of silicon oxycarbide ceramics1
Synthesis of TiB2 powders by borothermal and carbothermal reduction of TiO21
Incorporation of cerium oxide into hydroxyapatite/chitosan composite scaffolds for bone repair1
Structure and dielectric properties of Lu-doped SrBi2Ta2O9 synthesized by the molten salt method1
Influence of starting WC particle size and sintering conditions on structure and properties of WC-Ni-Co coarse grain ceramics1
Synthesis, characterization and photocatalytic efficiency of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO core/shell/shell nanostructures1
Heavily doped high-entropy A2B2O7 pyrochlore1
Preparation of all solid-state electrolyte lithium ion batteries by multi-layer co-fired process1
Low-temperature sintering of Li4SiO4 spheres with high crushing load using mesoporous silica as Si sources1
Influence of Er3+ doping on the mechanical and thermophysical properties of (ErxY1-x)3Al5O12 ceramics1
Effects of different processing parameters on structure of Ba1-xSrxTiO3 powders synthesized via nonhydrolytic sol-gel method1
The influence of Ti/Ni metallic phase content on the microstructure and environmental interactions of gradient Al2O3-based composites1
Conch-shell-inspired porcelain ceramic tile/Kevlar fabric composites with excellent combination of strength, toughness and shock resistance1
0.055556058883667