Bioresources

Article	Citations
Banana pseudo-stem and cattle manure for lactic acid production and the application of polylactic acid-cellulose silver nanoparticle-based nanocomposite films in food storage	117
Time to collaborate for the age of paper	59
Carbon nanospheres derived from crop residues by acidic lithium bromide hydrate treatment	57
Green design and recycling systems for solving the dilemma of disposable chopsticks waste caused by online food delivery: A review	46
Towards biodegradable barrier packaging: Production of films for single-use primary food liquid packaging	38
Optimization of parameters for vacuum heat modification of Cupressus funebris wood	37
Effect of age on heartwood proportion, color, chemical composition, and biological resistance of teakwood	35
Detection of old house borer larvae in wooden structures by acoustic emission method – Influence of larval size and sensor location	29
Dynamic water penetration behavior of top coating color and its effects on structure properties of double-coated layer	25
Prediction of withdrawal resistance of self-tapping screws in softwood structural lumber	24
Wood composites based on in situ modification of poplar veneers by PEG-[Bmim]Cl	24
Nondestructive prediction of fire performance in fire retardant-treated wood using x-ray computed tomography	23
What to do with toxic, contaminated cellulose-based adsorbents	22
An optimized method for extracting oenothein B from eucalyptus leaves	22
Parameter calibration for simulation of Gentiana seedling substrate based on discrete element method	21
Investigation on walnut kernel oil extraction using different methods	21
Soil respiration and organic carbon changes along a chronosequence of Pinus nigra forest stands	21
Preparation and optimization of porous regenerated cellulose microspheres from cellulose tetraethyl-ammonium/urea solution for adsorption of cationic methylene blue dye	20
Determination of charring thickness of wood by residual strength analysis	20
Predictive model of the modulus of elasticity in static bending (MOE) of larch wood based on gray relation analysis (GRA) and gene expression programming (GEP)	19
Anti-inflammatory and cytotoxic chemical constituents from the trunks of Berberis wallichiana	19
Numerical simulation on influencing factors of co-firing of municipal solid waste and leather	19
Wood-based additive manufacturing: Current methodologies	18
Removal efficacy of toxic metals in leachate through micro-organisms isolated from the natural environment	17
Valorization of agricultural residues: Challenges and opportunities in the production of bio-based materials	17

Acoustic characteristics of bamboo-based guitar – A case study	17
Coating activated carbon from coconut shells with Co3O4/CeO2 for high-performance supercapacitor applications: An experimental study	17
Deep eutectic-like solvent-assisted isolation of lignin from Pinus densiflora and its characteristics	17
Particleboards manufactured from Tectona grandis wood waste with homogeneous and three-layer heterogeneous compositions for commercial purposes	17
Selective preparation of furfural via the pyrolysis of cellulose catalyzed with nitrided HZSM-5	17
Optimization of edge banding process parameters used for particle board and medium density fiberboard	16
Exploring the convergence of tradition and modernity: The educational tourism potential of Suzhou oil-paper umbrella craftsmanship	16
Evaluation of lauric-myristic acid as phase change material in thermally modified wood for thermal energy storage	16
Comparison of the sound absorption properties of acoustic absorbers made from used copy paper and corrugated board	16
Effect of Sesbania and Triticale rotation on plant characteristics and soil quality in coastal saline-alkaline land: A two-year field experiment	15
Pulp and Paper: Reflections on faculty and research careers and the journey with BioResources	15
Determination of the ignition temperature of hay for the purposes of fire risk assessment on farms - Slovak case study	15
Qualitative and quantitative anatomical characteristics and radial variation of major cell components in Paulownia tomentosa wood grown in Korea	15
How to make cellulose hate water – “Change it, cover it, confuse it, or accept it as it is	15
Voxel-based modular architectural design strategy toward autonomous architecture	15
Analysis of strength, durability, stability, and fatigue parameters of furniture doors and drawers using engineering design method	15
Evaluation of CNC routed surface quality of maple (Acer pseudoplatanus) and oak (Quercus robur L.) with different milling angles as function of grain orientation	14
Upcycling of protein concentrates from industrial byproducts into polyurethane wood adhesives	14
Evaluation of glycolaldehyde as a formaldehyde substitute in urea-based wood adhesives	14
Modeling of the thermoforming process of paperboard composites for packaging	14
Alternative particleboards based on treated and untreated hay	13
Evaluation of oleander (Nerium oleander L.) plant extract and hydrosol as a protective agent on wood material and its effects on physical performance	13
Rigidity coefficients of rubber belts for dynamic testing of modulus of elasticity and shear modulus of non-wood engineered board	13
The ethics of sustainability	12
Poultry litter physiochemical characterization based on production conditions for circular systems	12
Coating of fruit with an edible soybean protein isolate film doped with hydroxypropyl methyl cellulose for improved preservation	12
pH-responsive hydrogels of carboxymethyl cellulose and polyethyleneimine for efficient removal of ionic dye molecules	12
Environmental evaluation of experimental heat-treated oriented strand board	12
Preparation and physicochemical properties of Cyperus esculentus starch from its tubers using ultrasound-assisted alkali method	12
Simulation of two-stage automotive shredder residue pyrolysis and gasification process using the Aspen Plus model	12
Chemical composition, antimicrobial, and antioxidant activities of medicinal plants nutsedge and fenugreek	12
Development of educational tourism based on Guangxi’s traditional papermaking techniques	12
Effects of the membrane-covered technology and superphosphate on the compost quality and nitrogen-containing gas emissions during aerobic composting	12
Change of aluminum concentrations in specific plants by species, organ, washing, and traffic density	12
Estimation and action mechanisms of cinnamon bark via oxidative enzymes and ultrastructures as antimicrobial, anti-biofilm, antioxidant, anti-Diabetic, and anticancer agents	12
Moringa gum-derived polymeric carbon dots for antimicrobial activity	12
Hydrophobic microcrystalline cellulose/polyethyleneimine composite aerogel for effective sound absorption	12
Bamboo as a source for value added products: Paving way to global circular economy	11
Suberin as a bio-based flame-retardant?	11
The impact of an acidic post-treatment on surface-modified old corrugated cardboard (OCC) with NaOH-urea as a reinforcing agent	11
The role of the chemical industry in chemophobia	11
Application of three types of aminated lignins for efficient removal of Cd(II) and Pb(II) ions in aqueous solution	11
Sound absorption efficiency of plywood-carbon fiber composites: A new frontier in wood material science	11
Evaluation of the factors affecting opening-closing performance of wooden cabinet doors	11
Public awareness of paper’s sustainability in a digital society	11
Use of catastrophe theory to establish safety assessment model for timber-framed heritage buildings	11
Polyhydroxyalkanoate production by Cupriavidus necator with inedible rice	11
Effects of pressure and temperature on wood impregnation – Focusing on larch (Larix kaempferi) and Korean pine (Pinus koraiensis)	11
Biomass analysis of industrial hemp “Felina 32” and the influence of plant height on its quality	11
Design and manufacture of laminated veneer lumber packaging boxes and pallets and evaluation of their mechanical properties	10

Role of climate change on Oriental spruce (Picea orientalis L.): Modeling and mapping	10
Rapid determination of urea formaldehyde resin content in wood fiber mat using near-infrared spectroscopy	10
Archival performance of paper as affected by chemical components: A Review	10
Bread spoilage fungi as creators of α amylase using two types of wheat flour	10
Study on bearing capacity of LVL asymmetric truss of lightweight poplar wood	10
Cold pressing and hot curing process for assembly of hexagonal pre-shaped bamboo culm sections	10
Fungal melanins and their potential applications: A Review	10
Influence of selected storage temperatures on wood properties and its biological resistance after the use of methylxanthines	10
Investigation of NIR spectroscopy and electrical resistance-based approaches for moisture determination of logging residues and sweet sorghum	10
Improvements in the physical properties and decay resistance of bamboo materials via modification with boric acid and borax	10
Preliminary optimization of composite compositions based on modified Sosnowsky’s Heracleum	10
Range of color changes of beech wood in the steaming process	9
Investigating the sound absorption performance of circular and slotted perforated birch (Betula platyphylla) plywood as interior building materials	9
Edible coatings for strawberry based on extracellular compounds of Humphreya coffeata	9
Catalytic hydrogenolysis lignin to obtain phenols: A review of selective cleavage of ether bonds	9
Size press practices and formulations affecting paper properties and process efficiency: A Review	9
Surface charring of silver fir wood cladding using an enhanced traditional Japanese Yakisugi method	9
Color properties of tannin-treated wood	9
Green mediator for selenium nanoparticles synthesis with antimicrobial activity and plant biostimulant properties under heavy metal stress	9
Mechanical properties for composites with dammar resin reinforced with crushed corn cob	9
Resistance of the inner part of oil palm trunk impregnated with aqueous polymer-isocyanate to subterranean termite attack	9
Anatomical characteristics, fibre morphologies, and densities of six rattan species from Malaysia	9
The impact of drying conditions on the surface color changes of pine wood	9
Characterization and optimization of organoclay- poly(melamine-co-formaldehyde)-methylated solution impregnated pulai (Alstonia spp.) wood using response surface methodology	9
Preliminary study of synthesis and characterization of biodegradable avocado seed starch-chitosan plastic with glycerol plasticizer	9
Preparation of a canola-based polyethyleneimine-crosslinked bioadhesive for particleboards production	9
The comparative potential of four Compositae plants for phytoremediation of karst lead/zinc mine tailings contaminated soil	9
Adhesive type’s effects on adhesive strength of densified reinforced laminated wood obtained from black poplar (Populus nigra L.)	9
Flexural vibration test method for determining the dynamic elastic modulus of full-size strawboards for use in transportation framed cases	9
Interactions between geometrical forms and microstructural features in culm of square bamboo	9
Reformulation of alkaline copper quat for enhanced copper leaching resistance	9
Chemical composition and antioxidant activity of extracts from the fruit, leaf, and branchlet of Cupressus arizonica Green	8
Material deterioration detection of wooden columns at the Nanyang Fuya Museum using a combination of macroscopic visual inspection and moisture content testing,	8
Optimization of synthesis conditions for carboxymethyl cellulose from pineapple leaf waste using microwave-assisted heating and its application as a food thickener	8
Cultural symbols migration and user perception: Innovation in Chinese-style furniture design	8
Effects of thermal treatment on air-dried density, color change, average surface roughness, and sound absorption capacity of Scots pine	8
Wet-spinning of TEMPO-oxidized lignocellulose nanofibrils and functionalization of the filament with Ag nanoparticles	8
The effects of using different adhesive on the thickness swelling ratio of LVL produced from scotch pine	8
Success factors of small and medium enterprises in the Malaysian furniture industry: Discerning the growth of entrepreneurs	8
Hydrochar prepared from aquatic and terrestrial biomass: Comparative analysis of characteristics and applications	8
A comparative study of the effects of chemical crosslinking agents on NBSK handsheet properties	8
Biochar increases rice yield by improving root morphological and root physiological functions in heavily saline-sodic paddy soil of Northeast China	8
Influence of specimen dimensions in the determination of strength and modulus of elasticity in static bending of hardwoods	8
Review of factors influencing the competitiveness of Bumiputera furniture entrepreneurs in the domestic market	8
Investigation of color parameters in pine, limba, sapele, iroko, oak, and beech wood species exposed to outdoor conditions in Van city, Turkey	8
Effect of silane-siloxane based water-repellent impregnant on the dimensional stability of some wood species	8
Synthesis of iso-amyl ester rosin and its evaluation as an alternative to paraffin in medium density fiberboard production	8
Distilled spirits lees ash as cement additive	8
Enhancement on physicomechanical properties of short-rotation teak woods by non-biocide chemical and thermal treatments	8
Effects of knife-incising and longitudinal kerfing pretreatments on high-temperature drying of red pine and pitch pine timbers	8
Back-trap mottle: A review of mechanisms and possible solutions	8
Gendang Melayu Sarawak (GMS) – Sarawak Malay Drum, the dying and forgotten tradition	8
Plastic/fiber composite using recycled polypropylene and fibers from Sorghum halepense L.	8
"Influencing factors of double roll coating ratio of reconstituted tobacco by papermaking	8
Investigation of the mechanical properties in the production process of biomass fuel pellets	7
Maize plant growth period identification based on MobileNet and design of growth control system	7
Cultural studies and yield attributes of pink oyster mushroom (Pleurotus djamor) in West Bengal	7
An artificial neural network model for predicting mechanical strength of bamboo-wood composite based on layups configuration	7
Characteristics of resonance sound in a circular saw enclosure	7
The compostability of denim fabrics dyed with various indigos	7
Gambang: The gamelan wooden xylophone	7
Finite element explicit dynamics simulation of an impact cutting mechanism analysis of Populus tomentosa branches	7
Characterization and identification of wooden rice bucket made in 1860s	7
Optimization of Ni/ZnZr catalyst for enhanced syngas yield in catalytic pyrolysis of rice straw	7
TSW-YOLO-v8n: Optimization of detection algorithms for surface defects on sawn timber	7
Renewable resource-derived elastomer vitrimer and its sustainable manufacturing and application in extreme environmental conditions	7
The transcriptome and metabolic pathways of Persea americana under drought and low-temperature stress	7
A two-variable model for predicting the effects of moisture content and density on the mechanical properties of Phyllostachys edulis bamboo	7
Effect of polyhydroxybutyrate and ethyl cellulose for barrier coating of kraft paper	7
The viscoelasticity and deformation mechanism of Taxodium hybrid ‘Zhongshanshan’ wood by dynamic mechanical analysis	7
Secondary xylem of tree species from Cerrado biome	7
Effect of Pd/C catalytic extraction on the hydrothermal depolymerization properties of ethanol organosolv lignin (EOL) in supercritical ethanol	7
Characterization of an eco-friendly gypsum composite board using agricultural fibers (rice straw)	7
Hybrid composite board produced from wood and mineral stone wool fibers	7
Cooperative treatment and resource utilization of municipal solid waste by industrial coke ovens: Effects of doping ratio and management	7
Discrete element method for simulation and calibration of cotton stalk contact parameters	7
In vitro assessment on anti-inflammatory and anti-lipidemic properties of selected plant species	7
	7
Halostability and thermostability of chitinase produced by fungi isolated from salt marsh soil in subtropical region of Saudi Arabia	7
Effect of biogas slurry on the nutrient cycling and micro-organisms community in two types of soil	7

Analyzing changes in the U.S. wood furniture industry from 1997 to 2019: Production, net imports, and consumption	7
Effects of pretreatment on the microcharacterization and fermentation of bamboo shoot shells	7
Pour point and predictive models for the viscosity-temperature non-linear behaviour of ternary fuel blends for a compression ignition engine	7
Green synthesis of silver nanoparticles using leaf extract of Calluna vulgaris: Characterizations, properties, and photocatalytic activities	7
Mechanical performance and anti-fungal and anti-algal properties for teakwood/parawood/PVC composites in UV-weathering and seawater immersion conditions,	7
Green synthesis of copper nanoparticles using white tea leaf extract: Characterization, adsorption behavior, and antibacterial applications	7
Nanocomposites of ZnO/CuO/Se synthesized by Schinus terebinthifolia biomass and their antioxidant, cytotoxicity, anti-H. pylori, and anti-obesity properties	7
A review of polyphenol and whey protein-based conjugates	7
Drying biomass using waste heat from biomass ash by means of heat carrier	7
Changes in the physical and mechanical properties of Pinus taeda and Eucalyptus bosistoana wood modified by contact charring	7
Effect of air heat treatment on the color change and weight and density loss of six Korean oak woods	7
The effect of body mass on designing the structural elements of wooden chairs	7
Strength and stiffness of 3-ply industrial bamboo matting	6
Evaluation of the effects of transition metal ions on the optical aging and whiteness of chemimechanical pulp	6
Analysis of nutritional components in the bran of debranned wheat and comparison with endosperm flour	6
Template synthesis of nitrogen self-doped hierarchical porous carbon with supermicropores and mesopores for electrical double-layer capacitors	6
Advances in nanocellulose-based composites for sustainable food packaging	6
Project-based learning in timber engineering education: A recent example	6
Large-format preparation technology and electric heating performance of wooden electric heating flooring	6
Performance of particleboard made with Neolamarckia cadamba, Leucaena leucocephala, and their 50:50 Admixtures	6
	6
	6
Evaluating CO2 emissions in the residential sector: Life cycle assessment (LCA) using regional forestry design models in system dynamics (SD)	6
Classification of softwoods using wood extract information and near infrared spectroscopy	6
Performances of green velvet material (PLON) used in upholstered furniture	6
Compositomics: A timely conceptual framework for future advancements in green materials’ design and development	6
Using trees to monitor airborne Cr pollution: Effects of compass direction and woody species on Cr uptake during phytoremediation	6
Research progress on lignin-based carbon electrode materials in rechargeable batteries	6
Delignification’s effect on microcrystalline cellulose obtained from oil palm empty fruit bunch fibres	6
Calcium oxalate crystals and the optimal growing conditions for Actinidia arguta	6
Influence of the shape of the knife’s cutting edge on the cutting force in the chipless cutting of three tree species	6
Effect of timber harvesting techniques and slopes on soil respiration of young and mature black pine stands in northwestern Türkiye	6
Is it possible to produce sustainable aviation fuels from lignocellulosic biomass waste?	6
	6
Research on the evaluation model for the tactile feel of custom wardrobe furniture finishes	6
Research on the design of growable solid wood children’s beds	6
Porous cellulose nanofiber (CNF)-based aerogel with the loading of zeolitic imidazolate frameworks-8 (ZIF-8) for Cu(II) removal from wastewater	6
Anatomical characteristics of unproductive Elaeis guineensis stems and their correlation with density	6
The role of Open Science in our research	6
Isolation of arabinose and galactose from industrial sidestreams in high yield and purity	6
Co-composting of food waste and leaves as a way to improve soil microbial activity and green-gram growth	6
Fabrication of surface embedded silver cellulose-based flexible transparent electrodes by self-assembly	6
Urban biodiversity performance determining model (UrBioPDeM): The case of Isparta, Türkiye	6
Influence of biological pretreatment of wooden dowels on strength of rotary welded joints	6
Challenges of undergraduate programs in chemical processing engineering of forest products in universities of China	6
Properties of Pinus sp. pellets prepared after in-line pre-compaction with torrefaction	6
Rice husk hydrochars prepared with different post-treatment methods for the adsorption of dyes and antibiotics	6
Atomic layer deposited TiO2 on a foam-formed cellulose fibre network – Effect on hydrophobicity and physical properties	6
Determining the taxol contents of yew tree populations in western Black Sea and Marmara regions and analyzing some forest stand characteristics	6
Preparation and characterization of cellulose-based activated carbon by cesium chloride chemical method	6
Bleaching microcrystalline cellulose using hydrogen peroxide, peracetic acid, and ozone	6
Acid-catalyzed solvolysis of softwood using polyethylene glycol monomethyl ether to produce functional lignin derivatives	6
Characterization of a xyloglucananse in biodegradation of woody plant xyloglucan from Caldicellulosiruptor kronotskyensis	6
Determining abrasion resistance of decorative coated wood-based panels using retinex model	6
Feasibility study of the paper sludge properties in manufacturing recycled filler	6
Surface modification of self-adhesive straw-based fiberboard via alkali treatment combined with DES	6
Solid-state fermentation for gossypol detoxification and nutritive enrichment of cottonseed cake: A scale-up of batch fermentation process	6
White and brown rot fungal decay resistance of epoxy composite modified with nanocellulose and tetraethoxysilane	6
Performance of polyurethane adhesive in hardwood cross-laminated timber	6
Addition of polyvinylamine in chemi-thermomechanical pulp and kraft pulp and the effects on dewatering, strength, and air permeance	6
Wooden door preferences based on lifestyle theory and consumer behaviour theory	6
A method of hydrophobically modifying paper with a trace reagent	6
Prediction of longitudinal compressive physical and mechanical properties of bamboo	6
Green solvents in biomass delignification for fuels and chemicals	6
Poultry feathers and offal treatment by using beneficial microorganisms	6
Facile fabrication of lignin crosslinked hydrogel for cationic dye adsorption and antioxidant	6
Cellulose powder functionalized with phenyl biguanide: Synthesis, cross-linking, metal adsorption, and molecular docking	6
Study on mechanical strength of cantilever handrail joints for chair	6
Enhancing crop productivity and nitrogen use efficiency by application of pine oleoresin coated urea in maize-wheat cropping sequence in vertisols	6
Thermo-hydrolytic recycling of urea-formaldehyde resin-bonded laminated particleboards	6
	5
Wooden cantilever covered bridges in Anhua, China	5
Optimization of the solid cardboard in carton design	5
Investigation of indoor noise pollution level and air quality of furniture manufacturers	5
Effect of air heat treatment on the shrinkage and surface roughness of six Korean oak woods	5
Optimization design of key parameters of forming parts of an involute plunger type biomass ring die pelletizing machine by DEM-FEM coupled modeling	5
Regulation and characterization of polar groups on the surfaces of cellulose nanocrystal–nanosilver hybrids	5
Effects of different levels of nanocellulose and chemical pulp on the optical and mechanical properties of money paper made with bottom combers pulp	5
Chemical reagent for detecting tension wood in selected tree species	5
Strategies for applying shape grammar to wooden furniture design: Taking traditional Chinese Ming-style recessed-leg table as an example	5
Aerobic composting and vermicomposting of durian shell and citrus peel wastes	5
Wet tensile strength development of PAE wet-strengthened NBSK handsheets by AKD internal sizing	5
Properties of poplar veneer modified by Acid Red 3R dye in combination with ammonium dihydrogen phosphate	5
“Facility location selection and layout planning through AHP, PROMETHEE, and CORELAP methods in the furniture industry	5
Carbon footprint accounting and low-carbon path optimization for imported timber-based wooden furniture supply chains	5
Toxicity, repellency, and horizontal transfer of foam insecticides for remedial control of an invasive drywood termite, Cryptotermes brevis (Blattodea: Kalotermitidae)	5
Tensile properties of silicone biocomposite reinforced with waste material (Hevea brasiliensis sawdust): Experimental and numerical approach	5
Optimization of alkali-treated banana pseudo-stem fiber/PBAT/PLA bio-composite for packaging application using response surface methodology	5
Effects of hot-pressing parameters on the properties of waste Tetra Pak/bamboo composites	5
Feasibility and properties of flat-pressed three-layer bamboo-rubberwood particleboards for resource-efficient production	5
Preparation and performance study of modified silica sol/phenolic resin	5
Characterisation of rotary friction welding process and mechanism of heat-treated Scotch pine	5
Effects of the molding process on properties of bamboo fiber/epoxy resin composites	5
Environmental applications of immobilized and bio-resourced redox mediators: A Review	5
Mechanical properties of paper saturated with a hydrophobic ionic liquid	5