Bioresources

Article	Citations
Accurate and automated detection of surface knots on sawn timbers using YOLO-V5 model	78
How are small and medium enterprises in Malaysia’s furniture industry coping with COVID-19 pandemic? Early evidences from a survey and recommendations for policymakers	57
A review on bio-based graphene derived from biomass wastes	55
Fabrication of cellulosic paper containing zeolitic imidazolate framework and its application in removal of anionic dye from aqueous solution	45
Nanocellulose characterization challenges	34
Natural, accelerated, and simulated weathering of wood: A Review	31
Municipal solid waste management: A review of waste to energy (WtE) approaches	27
Formulating bioplastic composites for biodegradability, recycling, and performance: A Review	25
Bamboo as a valuable resource and its utilization in historical and modern-day China	25
Effects of chemical and morphological structure on biodegradability of fibers, fabrics, and other polymeric materials	24
COVID-19: Challenges and perspectives for the pulp and paper industry worldwide	23
Interfacial bonding mechanisms of natural fibre-matrix composites: An overview	23
Use of sugarcane bagasse and industrial timber residue in particleboard production	21
Perspectives on deriving mathematical models in pulp and paper science	21
Cellulose, nanocellulose, and antimicrobial materials for the manufacture of disposable face masks: A review	21
Effects of nanocellulose on alginate/gelatin bio-inks for extrusion-based 3D printing	21
The future of single-use paper coffee cups: Current progress and outlook	21
Tuning of adhesion and disintegration of oxidized starch adhesives for the recycling of medium density fiberboard	20
Current overview of carbon fiber: Toward green sustainable raw materials	20
Cotton-based flame-retardant textiles: A review	19
The effect of nanocellulose addition to phenol-formaldehyde adhesive in water-resistant plywood manufacturing	19
Toward sustainable processes of pretreatment technologies of lignocellulosic biomass for enzymatic production of biofuels and chemicals: A review	19
Performance properties of particleboard panels modified with nanocellulose/boric acid	19
Lignin functionalization strategies and the potential applications of its derivatives – A Review	19
A discrete element method model of corn stalk and its mechanical characteristic parameters	18

Recent advancements in biochar production according to feedstock classification, pyrolysis conditions, and applications: A review	17
Cocoa pod husks as potential sources of renewable high-value-added products: A review of current valorizations and future prospects	17
Effect of CaCO3 on the wood properties of tropical hardwood species from fast-growth plantation in Costa Rica	17
Overview of pretreatment methods employed on oil palm biomass in producing value-added products: A review	16
Prediction of the color variation of moso bamboo during CO2 laser thermal modification	16
Effect of microwave treatment on the wood structure of Norway spruce and radiata pine	16
Separation and characterization of biomass components (cellulose, hemicellulose, and lignin) from corn stalk	16
Modal analysis of violin bodies with back plates made of different wood species	15
Hydroxypropyl cellulose loaded with ZnO nanoparticles for enhancing the mechanical properties of papyrus (Cyperus papyrus L.) strips	15
The next-generation biomass for biorefining	14
Structural color for wood coloring: A review	14
Brewing process development by integration of edible filamentous fungi to upgrade the quality of brewer’s spent grain (BSG)	14
Assessing the awareness and readiness of the Malaysian furniture industry for Industry 4.0	14
The case for urban and reclaimed wood in the circular economy	14
Morphological and thermal properties of composites prepared with poly(lactic acid), poly(ethylene-alt-maleic anhydride), and biochar from microwave-pyrolyzed jatropha seeds	14
Performance evaluation of a novel cross-laminated timber made from flattened bamboo and wood lumber	14
Predicting effects of selected impregnation processes on the observed bending strength of wood, with use of data mining models	14
Suitability of paulownia wood from Malaysia for furniture application	13
Review: The softness of hygiene tissue	13
Bioefficacies of microbes for mitigation of Azo dyes in textile industry effluent: A review	13
Nanoemulsions of some edible oils and their antimicrobial, antioxidant, and anti-hemolytic activities	13
Reduction of borax / agar-based gel residues used to neutralize acidity of a historical manuscript with use of different paper barriers: Artificial ageing results	13
Cellulose nanocrystal-based liquid crystal structures and the unique optical characteristics of cellulose nanocrystal films	13
Eco-innovation performance in Slovakia: Assessment based on ABC analysis of eco-innovation indicators	13
Comparative study on laccase activity of white rot fungi under submerged fermentation with different lignocellulosic wastes	13
Antifungal activity of methylxanthines based on their properties	13
Effect of exterior wood coatings on the durability of cross-laminated timber against mold and decay fungi	13
Characterization of natural cellulosic fiber isolated from Malaysian Cymbopogan citratus leaves	13
Cellulose fiber enzymatic modification to improve the softness, strength, and absorption properties of tissue papers	12
Factors affecting enterprise level green innovation efficiency in the digital economy era – Evidence from listed paper enterprises in China	12
Energy efficiency – A particular challenge for the cellulose-based products industries	12
Simultaneous removal of methyl orange and Cr(VI) using polyethyleneimine-modified corncob-derived carbon material	12
The application of bamboo weaving in modern furniture	12
Influence of wood’s anatomical and resin traits on the radial permeability of the hybrid pine (Pinus elliottii × Pinus caribaea) wood in Australia	12
Activated carbon and cellulose-reinforced biodegradable chitosan foams	12
Application of glycine, folic acid, and moringa extract as bio-stimulants for enhancing the production of ‘Flame Seedless’ grape cultivar	12
Solubility parameters analysis of Eucalyptus urograndis kraft lignin	12
Selected properties of flat-pressed wood-polymer composites for high humidity conditions	12
Comparative study of fly ash/sugarcane fiber reinforced polymer composites properties	11
Effects of artificial weathering on the color, gloss, adhesion, and pendulum hardness of UV system parquet varnish applied to doussie (Afzelia africana) wood	11
Preparation and application of a xylan-based antibacterial papermaking additive to protect against Escherichia coli bacteria	11
A fast and robust artificial intelligence technique for wood knot detection	11
Cellulose powder functionalized with phenyl biguanide: Synthesis, cross-linking, metal adsorption, and molecular docking	11
Effects of biochar on waterlogging and the associated change in micro-ecological environment of maize rhizosphere soil in saline-alkali land	11
Radio frequency vacuum drying of Eucalyptus nitens juvenile wood	11
X-ray photoelectron spectroscopy analysis of wood degradation in old architecture	11
Biochar increases rice yield by improving root morphological and root physiological functions in heavily saline-sodic paddy soil of Northeast China	11
Vibration test and comfort analysis of environmental and impact excitation for wooden floor structure	10
Transparent wood prepared by polymer impregnation of rubber wood (Hevea brasiliensis Muell. Arg)	10
Detection of wood surface defects based on improved YOLOv3 algorithm	10

Solid-state fermentation on poplar sawdust and corncob wastes for lignocellulolytic enzymes by different Pleurotus ostreatus strains	10
Effective diameters of drilled holes in pinewood in response to changes in relative humidity	10
Digital twin control of multi-axis wood CNC machining center based on LinuxCNC	10
Ecofriendly wood adhesives from date palm fronds lignin for plywood	10
Mechanical performance of Scots pine wood from northwestern Poland – A case study	10
Bio-based adhesive mixtures of pine tannin and different types of lignins	10
Digital marketing during the COVID-19 pandemic: A case study of its adoption by furniture manufacturers in Malaysia	10
Optimization of panel furniture plates rework based on intelligent manufacturing	10
Variation of quantitative anatomical characteristics in the culm of belangke bamboo (Gigantochloa pruriens)	10
Molded pulp products for sustainable packaging: Production rate challenges and product opportunities	10
Characterization of Mexican waste biomass relative to energy generation	10
Properties of 3D-printed wood sawdust-reinforced PLA composites	10
Antifungal activity and fire resistance properties of nano-chitosan treated wood	10
Brewer’s grains with different pretreatments used as bio-adsorbents for the removal of Congo red dye from aqueous solution	10
Consolidated bioprocess for bioethanol production from lignocellulosic biomass using Clostridium thermocellum DSM 1237	10
Crude oil removal using Calotropis procera	10
Bio-based rigid polyurethane foam prepared from apricot stone shell-based polyol for thermal insulation application – Part 2: Morphological, mechanical, and thermal properties	9
A comparison of alkaline and organosolv lignin extraction methods from coconut husks as an alternative material for green applications	9
Design issues of innovative furniture fasteners for wood-based boards	9
Hydrolysis of abandoned bovine hair by pulping spent liquor and preparation of degradable keratin-based sprayable mulch film	9
Preparation and characterization of modified corn stalk biochar	9
Application progress of microbial immobilization technology based on biomass materials	9
Modified geopolymer-based wood adhesive using waterborne polyurethane	9
Effects of UV light irradiation on color changes in thermally modified rubber wood based on FTIR	9
Physical and mechanical properties of clear wood from red oak and white oak	9
Increasing the impregnability of Oriental spruce wood via microwave pretreatment	9
Investigating the pyrolysis kinetics of Pinus sylvestris using thermogravimetric analysis	9
A review on carbon reduction analysis during the design and manufacture of solid wood furniture	9
Biobased rigid polyurethane foam prepared from apricot stone shell-based polyol for thermal insulation application, Part 1: Synthesis, chemical, and physical properties	9
A comprehensive review of nanocellulose modification and applications in papermaking and packaging: Challenges, technical solutions, and perspectives	8
Production and detoxification of inhibitors during the destruction of lignocellulose spatial structure	8
Tailoring properties of polylactic acid/rubber/kenaf biocomposites: Effects of type of rubber and kenaf loading	8
Effect of heat treatment on shore-D hardness of some wood species	8
Preparation and characterization of lignin-TiO2 UV-shielding composite material by induced synthesis with nanofibrillated cellulose	8
Surface charring of silver fir wood cladding using an enhanced traditional Japanese Yakisugi method	8
Change of aluminum concentrations in specific plants by species, organ, washing, and traffic density	8
Esterification of solid wood for plastic forming	8
Influence of layer arrangement on bonding and bending performances of cross-laminated timber using two different species	8
Lignin-carbohydrate complexes from coconut (Cocos nucifera) coir: Fractionation, structural elucidation, and potential applications	8
TEMPO-oxidized cellulose beads for cationic dye adsorption	8
Effectiveness of oil-based nanoemulsions with molecular docking of its antimicrobial potential	8
Axial compression of three types of bamboo scrimber columns with different cross-sections	8
Investigation of a formaldehyde-free cottonseed flour-based adhesive for interior plywood	8
Bacterial cellulose as reinforcement in paper made from recycled office waste pulp	8
Is it correct to name DESs deep eutectic solvents?	8
Drill holes deflection determination for small diameter bits in wood-based materials	8
Development of milk protein edible films incorporated with Lactobacillus rhamnosus GG	8
Furniture online consumer experience: A literature review	8
A new method to evaluate the hand-feel potential of furnishes for tissue paper products	8
Effect of torrefaction temperature and O2 concentration on the pyrolysis behaviour of moso bamboo	8
Alternated desorption-absorption accelerated aging of Salix psammophila sand barrier	8
3D fiber models to simulate and optimize tissue materials	8
Effects of surface modification on the physical, mechanical, and thermal properties of bamboo-polypropylene composites	7
New technology for developing a lightweight refiner plate for hardwood kraft pulp fibers	7
Optimized green extraction conditions of matcha green tea (Camellia sinensis) using central composite design for maximal polyphenol and antioxidant contents	7
Morphology and properties of agarwood-waste-filled natural rubber latex foam	7
Effect of smoke treatment on flexural strength of bamboo hierarchical structure	7
Energy saving in papermaking by application of hybrid calcium carbonate	7
The design and evaluation of three-dimensional corner joints used in wooden furniture frames: Experimental and numerical	7
Surface roughness and chip morphology of wood-plastic composites manufactured via high-speed milling	7
An integrated approach for hemicellulose extraction from forest residue	7
Identification of some fiber characteristics in Rosa sp. and Nerium oleander L. wood grown under different ecological conditions	7
Influence of processing parameters on the surface roughness of solid wood cut by abrasive water jet	7
Treatment effects of choline chloride-based deep eutectic solvent on the chemical composition of red pine (Pinus densiflora)	7
Detergency mechanisms and cellulosic surfaces: A review	7
Polyurethane composite films based on modified lignin and reinforced with silica nanoparticles: Synthesis and characterization	7
Medium density fiberboard (MDF) with efficient electromagnetic shielding: Preparation and evaluation	7
Surface characterization of paper products via a stylus-type contact method	7
Influence of tissue paper converting conditions on finished product softness	7
Schizophyllum commune: A fungal cell-factory for production of valuable metabolites and enzymes	7
Pozzolanic activity of corn straw leaf ash produced at different temperatures and treated with portlandite solution	7
Quantifying the finest particles in dust fractions created during the sanding of untreated and thermally modified beech wood	7
Determination of decay, larvae resistance, water uptake, color, and hardness properties of wood impregnated with honeybee wax	7
Effect of harvesting time and water retting fiber processing methods on the physico-mechanical properties of kenaf fiber	7
Structural design and mechanical properties analysis of bamboo-wood cross-laminated timber	7
Influence of moisture content on the mechanical properties of selected wood-based composites	7
Bioenergy production and utilization in different sectors in Sweden: A state of the art review	7
Rapid detection and identification of dioscorine compounds in Dioscorea hispida tuber plants by LC-ESI-MS	7
pH-responsive hydrogels of carboxymethyl cellulose and polyethyleneimine for efficient removal of ionic dye molecules	7
Use of plants to clean polluted air: A potentially effective and low-cost phytoremediation technology	7

Comparison of variability in results of acoustic tomographs in pedunculate oak (Quercus robur L.)	7
Research progress and prospects of wood high-temperature heat treatment technology	7
A review on oil spill clean-up using bio-sorbent materials with special emphasis on utilization of kenaf core fibers	7
Valorization of briquettes fuel using Pinus spp. sawdust from five regions of Mexico	7
Rice straw as a source of nanocellulose for sustainable food packaging materials: A Review	7
Performances of green velvet material (PLON) used in upholstered furniture	7
Printability and properties of 3D-printed poplar fiber/polylactic acid biocomposite	7
Deep eutectic solvent delignification to low-energy mechanical pulp to produce papermaking fibers	7
Optimizing methods to characterize caffeic, ferulic, and chlorogenic acids in Salicornia sinus-persica and Salicornia bigelovii extracts by tandem mass spectrometry (LC-MS/MS)	7
Characterization of poly-hydroxybutyrate/luffa fibers composite material	7
Sustainable conversion of agricultural biomass into renewable energy products: A Discussion	7
Production and evaluation of particleboards made of coconut fibers, pine, and eucalyptus using bicomponent polyurethane-castor oil resin	6
Modified lignin nanosphere adsorbent for lead and copper ions	6
Water resistance of heat-treated welded Iroko, ash, tulip, and ayous wood	6
An overview of the obtaining of biomass-derived gamma-valerolactone from levulinic acid or esters without H2 supply	6
Influence of moisture content on physical and mechanical properties of Cedrelinga catenaeformis wood	6
Effect of sodium hypochlorite concentration during pre-treatment on isolation of nanocrystalline cellulose from Leucaena leucocephala (Lam.) mature pods	6
Microwave-assisted extraction of functional compounds from plants: A Review	6
Correlations between rheological behavior and intrinsic properties of nanofibrillated cellulose from wood and soybean hulls with varying lignin content	6
Synthesis and characterization of novel nano-carbon mixture from Dabai (Canarium odontophyllum) nutshell	6
Optimization of process variables for briquetting of biochar from corn stover	6
Green material characteristics applied to office desk furniture	6
Effect of preservative treatment on physical and mechanical properties of bamboo (Gigantochloa scortechinii) strips	6
Statistical prediction of biogas and methane yields during anaerobic digestion based on the composition of lignocellulosic biomass	6
Bioconversion of wood waste to bio-ethylene: A review	6
Effect of activation temperature on properties of H3PO4-activated carbon	6
Solvent extraction and its effect on phytochemical yield and antioxidant capacity of woody medicinal plant, Polyalthia bullata	6
The influence of mechanical surface preparation method, adhesive type, and curing temperature on the bonding of Darwin stringybark	6
Characterization and use of Mangifera indica L. seeds from four varieties	6
Strategy to enhance the sugar production using recyclable inorganic salt for pre-treatment of oil palm empty fruit bunch (OPEFB)	6
Emissions from the fused filament fabrication 3D printing with lignocellulose/polylactic acid filament	6
Parameter optimization via the Taguchi method to improve the mechanical properties of bamboo particle reinforced polylactic acid composites	6
Screw withdrawal strength of heat-treated and laminated veneer lumber reinforced with carbon and glass fibers	6
Research on tool wear factors for milling wood-plastic composites based on response surface methodology	6
Range of color changes of beech wood in the steaming process	6
A two-phase reaction system for selective oxidative degradation of lignin model compounds	6
Effects of ZnCl2 on the distribution of aldehydes and ketones in bio-oils from catalytic pyrolysis of different biomass	6
Prediction of the equilibrium moisture content and specific gravity of thermally modified wood via an Aquila optimization algorithm back-propagation neural network model	6
Effect of water molecules at different temperatures on properties of cellulose based on molecular dynamics simulation	6
Integrating the new age of bioeconomy and Industry 4.0 into biorefinery process design	6
Hydrophobic molecular treatments of cellulose-based or other polysaccharide barrier layers for sustainable food packaging: A Review	6
Investigating the impact of weathering and indoor aging on wood acidity using spectroscopic analyses	6
Effect of using regenerated combined FAU and MOR zeolites as catalysts during the pyrolysis of kraft lignin	6
Combination of steam explosion and TEMPO-mediated oxidation as pretreatments to produce nanofibril of cellulose from Posidonia oceanica bleached fibres	6
Effect of resin content on the physiochemical and combustion properties of wood fiber insulation board	6
Analysis and optimization of process parameters of the degradable fiber mulch paper made from pineapple leaf and rice straw by response surface method	6
Mass-timber construction in Australia: Is CLT the only answer?	6
Modeling kinetics of the water extraction of protein from Caragana korshinskii Kom.	6
Influence of the treatment phase on the gluing performance of glued laminated timber	6
Effects of temperature and moisture content of logs on size distribution of black spruce chips produced by a chipper-canter at two cutting widths	6
Effects of nitrogen from different sources on mycelial biomass and polysaccharide production and pellet morphology in submerged cultures of Grifola frondosa	6
Using plant extractives as eco-friendly pulp additives: Mechanical and antifungal properties of paper sheets made from linen fibers	6
Dilute alkali pretreatment and subsequent enzymatic hydrolysis of amur silvergrass for ethanol production	6
A perspective of lignin processing and utilization technologies for composites and plastics with emphasis on technical and market trends	6
Refining micropore capacity of activated carbon derived from coconut shell via deashing post-treatment	6
Time-efficient approach to drill condition monitoring based on images of holes drilled in melamine faced chipboard	6
Effect of pH on hemicellulose extraction and physicochemical characteristics of solids during hydrothermal pretreatment of eucalyptus	6
Vegetative growth, yield, and fruit quality of guava (Psidium guajava L.) cv. Maamoura as affected by some biostimulants	6
Assessment of the physico-mechanical, thermal, and morphological properties of rubber wood modified with silica sol in combination with GU/GMU resins	6
The influence of mechanical surface preparation methods on southern pine and spotted gum wood properties: Wettability and permeability	6
Isolation and characterization of regenerated cellulose films using microcrystalline cellulose from oil palm empty fruit bunch with an ionic liquid	6
Bacterial and mold resistance of selected tropical wood species	6
Activation temperature and particle size of palm kernel shell vs. the surface properties of activated carbon	6
Technical and technological factors’ effects on quality of the machined surface and energetic efficiency when planar milling heat-treated meranti wood	6
Refining characteristics of isometric straight bar plates with different bar angles	6
Material selection of natural fibre using a grey relational analysis (GRA) approach	6
A new model based on principal component regression-random forest for analyzing and predicting the physical and mechanical properties of particleboard	6
Anatomical characteristics for identification and quality indices of four promising commercial bamboo species in Java, Indonesia	6
Activated carbon prepared from corn biomass by chemical activation with potassium hydroxide	6
Optical properties and lampshade design applications of PLA 3D printing materials	6
Contributions of polyelectrolyte complexes and ionic bonding to performance of barrier films for packaging: A review	6
Comparison of cadmium accumulation in upright and leaning poplar trees	6
Surface properties of poplar wood after heat treatment, resin impregnation, or both modifications	6
Development of a selection system for the colour of wardrobe furniture	5
Design and performance of amphiphilic lignin derivatives in enzymatic hydrolysis of sweet sorghum bagasse for bioethanol production	5
Properties of dual-species bamboo-oriented strand boards bonded with phenol formaldehyde adhesive under various compression ratios	5
Preparation and characterization of nanofibrillated cellulose from waste sugarcane bagasse by mechanical force	5
Decaying hardwood associated fungi showing signatures of polyethylene degradation	5
Isolation and identification of the antibacterial compounds in Coptis chinensis for the preservation of wood	5
Effect of the surface finishing methods on particleboard volatile organic compounds and formaldehyde emission	5
Wet extrusion molding of wood powder with hydroxy-propylmethyl cellulose and with citric acid as a crosslinking agent	5
Effects of various processing parameters on the mechanical properties of sisal fiber/PES composites produced via selective laser sintering	5
Soda-anthraquinone pulping optimization of oil palm empty fruit bunch	5
Polyhydroxyalkanoate production by Cupriavidus necator with inedible rice	5
Characterization and impact of curing duration on the compressive strength of coconut shell coarse aggregate in concrete	5
Simultaneous saccharification and co-fermentation with a thermotolerant Saccharomyces cerevisiae to produce ethanol from sugarcane bagasse under high temperature conditions	5
Models to estimate longitudinal compressive strength of Brazilian hardwood based on apparent density	5
Research on packaging optimization in customized panel furniture enterprises	5
Radial variation in tracheid lengths in dominant trees of selected coniferous species	5
Lignin use in nonwovens: A review	5
Recent progress in the production of lignin-based sunscreens: A Review	5
Preparation and characterization of regenerated cellulose biocomposite film filled with calcium carbonate by in situ precipitation	5
Physical and mechanical properties of soy-lignin bonded Rhizophora spp. particleboard as a tissue-equivalent phantom material	5
Pyrolytic characteristics and kinetics of Guanzhong wheat straw and its components for high-value products	5
Weathering performance of mulberry wood with UV varnish applied and its mechanical properties	5