Journal of Medical Devices-Transactions of the Asme

Papers
(The TQCC of Journal of Medical Devices-Transactions of the Asme is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Estimation and Validation of Knee Joint Kinematic Parameters Using Inertial Measurement Unit Sensors in a Wearable Device8
Patient-Customized Theatre Mattress Supports for Spinal Surgery: A Pilot Study Presenting a Novel Engineering Virtual Design and Manufacturing Technique8
Designing Hybrid Mechanical Ventilator System Based on Arduino and Raspberry Pi 47
Design and Validation of a Steerable Port Delivery Cannula System for Laser Interstitial Thermal Therapy7
Surgical Microgrippers: A Survey and Analysis7
Design and Evaluation of a High-Performance, Low-Cost Prosthetic Foot for Developing Countries6
Performance of a Dual-Sensor Cardiopulmonary Resuscitation Feedback System in Estimating Compression Depth and Rate During Simulated Chest Compressions6
On the Design and Testing of an Origami Inspired Nasal Cover: Mitigating Aerosol Risks During Endoscopic Sinus Procedures6
Use of a Negative Pressure Containment Pod Within Ambulance-Workspace During Pandemic Response5
Development of a Novel Perturbation Platform System for Balance Response Testing and Rehabilitation Interventions5
Protective Masks Utilizing Nonendangered Components5
A Computational Method for the Estimation of the Geometrical and Thermophysical Properties of Tumor Using Contact Thermometry4
A Portable Aspiration-Assisted Device for End-Cut Prostate Biopsy of Large Tissue Sample4
Application of Artificial Neural Network to Nucleic Acid Analysis: Accurate Discrimination for Untypical Real-Time Fluorescence Curves With High Specificity and Sensitivity4
User-Centered Virtual Environment for Poststroke Motor Rehabilitation4
Gravity Augmented Fused Filament Fabrication Additive Manufacturing4
Paper errata statement4
RestEaze: An Emerging Technology to Characterize Leg Movements During Sleep4
Development of an Endotracheal Tube Cap for Oxygen Delivery During Intubation4
Enhancing Gait Recognition in Lower Limb Exoskeletons: Adaptive Feature Selection and Random Forest With Bayesian Optimization4
Design and Experiment Research of a Novel Retrievable Peripheral Vascular Stent3
Extravascular Cooling of Blood Using a Concentrated Thermoelectric Cooling Probe3
A Robotic System With a Bendable Catheter for Laparoendoscopic Single Site Surgery3
The Integration of Robotic Arm and Vision System With Magnetic Tractor Beam Control for Precision Catheter Manipulation in Medical Procedures3
Development of an Esophageal Sleeve With Variable Stiffness and Internal Diameter for Endoscopic Surgery3
Development of a Customized Mask Frame Using a Three-Dimensional Facial Scan for an Airtight Seal for Disposable Surgical Face Masks3
Performance and Sensitivity Analysis of an Automated X-Ray Based Total Knee Replacement Mass-Customization Pipeline3
Adaptive Functional Electrical Stimulation Delivers Stimulation Amplitudes Based on Real-Time Gait Biomechanics3
A Proof-of-Principle Study of the Design and Optimization of a Novel Fluid-Driven Automated Retracting Needle System3
Design and Realization of an Isomorphic Master-Slave Robotic System for Precise Sub-Micrometer Manipulations in Ophthalmic Surgery3
Three-Dimensional Force Perception of Robotic Bipolar Forceps for Brain Tumor Resection3
Positive Pressure Testing Booths Development and Deployment in Response to the COVID-19 Outbreak3
Novel Bilayer Elasto-Hydrogel Adhesive Film for Facilitating Wet-Occlusive Therapy for Atopic Dermatitis2
A Novel Approach to Open Reduction and Internal Fixation of Distal Radius Fractures Utilizing a Multi-Degree-of-Freedom Traction and Stabilization Device2
Suture Odometry: A Novel Hardware-Independent Method for Precise Medical Capsule Localization in the Gastrointestinal Tract2
Two-Segment Flexible Macintosh Laryngoscope to Improve Glottic Visualization During Endotracheal Intubation2
Performance Evaluation of Neonatal Anti-Pressure Ulcer Bed Using a Novel Force-Sensing Array2
Feasibility of a One Degree-of-Freedom Linear Robot for Bed-Bound Stroke Rehabilitation2
Cost-Effective Clinical Methods to Evaluate the Efficacy of Gait Training Devices: A Systematic Review of Randomized Controlled Trials2
CRISIS Ventilator: Pilot Study of a Three-Dimensional-Printed Gas-Powered Resuscitator in a Porcine Model2
In Vitro Thrombogenicity Testing of Biomaterials in a Dynamic Flow Loop: Effects of Length and Quantity of Test Samples2
A New Handheld Tool to Select the Correct Tibial Insert Thickness by Measuring the Force to Push a Trial Insert Into Position During Total Knee Arthroplasty Surgery2
Design, Development and Validation of a Smart Cochlear Three-Dimensional-Printed Model to Train ENT Surgeons2
A Translatable System for Bi-Directional Stimulation and Evoked Response Measurement to Enable Neuronal Network Exploration2
Design and Initial Validation of a Multiple Degree-of-Freedom Joint for an Ankle-Foot Orthosis2
Robotic Hand Exoskeletons for Rehabilitation and Assistance: A State-of-the-Art2
A Vibratory, Subresonant Diagnostic Device to Measure Dental Implant Stability Via Angular Stiffness2
Associate Editor's Recognition2
Generating Appropriate and Reliable Evidence for Value Assessment of Medical Devices: An ISPOR Medical Devices and Diagnostics Special Interest Group Report2
Defining Anatomical Relationships of the Tibial Tubercle to Inform Execution of Tibial Tubercle Osteotomy in Revision Total Knees2
A Low-Cost Visual Grasp Aid for Neuropathy Patients Using Flexible Three-Dimensional Printed Tactile Sensors2
Design and Performance Evaluation of a Hybrid Hand Exoskeleton for Hand Opening/Closing2
Design and Evaluation of Kirschner Wire Guide Device for Patellar Fracture Fixation2
Design and Evaluation of Self-Cooling Electrodes for Radiofrequency Intestinal Anastomosis1
A Better Way to Visualize the Cervix: A Low-Cost Cervical Cancer Screening Device for LMIC Settings1
Simulation and Verification of a Magnetically Controlled System for a Wireless Capsule Robot1
The Development of a Novel Peristaltic Test Stand “Swallow-Sim” for the Mechanical Evaluation of Esophageal Stents1
Patient-Specific Three-Dimensional-Printed and Bolus Material-Based Localization Grids for Magnetic Resonance Imaging-Guided Interventional Procedures1
An Ergonomic Flexible Multi-Fire Clip Applier With Multiple Degrees-of-Freedom for Minimally Invasive Surgery to Improve Hemostatic Efficiency1
Management of Vesicovaginal Fistula in Lower-Resource Settings: A Novel Device for Collection and Drainage of Urine1
Usability and Performance Comparison of Active Shape Memory and Passive Stockings for Medical Compression1
Optimal Design and Experiment of Cable-Driven Puncturing Surgery Robot for Soft Needle1
Sensor-Embedded Tissue Phantom for Magnetic Resonance Elastography Mechanical Failure Testing1
Controlled Ice Nucleation With a Sand-PDMS Film Device Enhances Cryopreservation of Mouse Preantral Ovarian Follicles1
A Comparative Evaluation of New and Used Dental Explorer Working Tips1
An In Vitro Platform for Pharmacokinetic Quantification and Optimization of Cerebrospinal Fluid Filtration and Drug Circulation1
Study on the Mechanical Device, Control System, and Sensor of Biaxial Actuated Artificial Anal Sphincter Actuator for Treating Fecal Incontinence1
A Continuum Over Tube With Variable Stiffness for Transrectal NOTES1
Mechatronics Development and Control of a Lower Limb Exoskeleton With High-Torque Assistance1
Design Synthesis of a Robotic Uniaxial Torque Device for Orthopedic Haptic Simulation1
A Modular Nitinol Model With Lode Angle-Based Asymmetry and Improved Representation of the Superelastic Loops for Medical Device Applications1
Reducing Leak and Increasing Comfort of an N95 Filtering Facepiece Respirator for Aged-Care Workers Using a Customized, Soft, and Compliant Mask Frame1
A Portable, Vacuum-Operated, and Purely Mechanical Device for Extracting Feces by Suction to Cure Chronic Anal Fissures1
Comparative Efficacy of Humidifiers for Noninvasive Infant Respiratory Support1
Design and Testing of a Superelastic Nitinol Tissue Attachment Mechanism for Long-Term Gastrointestinal Device Retention1
Context-Driven Design of a Laparoscopic Instrument Cleaner for Use in Rural Low-Resource Hospitals1
Quantifying Viscous Damping and Stiffness in Parkinsonism Using Data-Driven Model Estimation and Admittance Control1
Design and Evaluation of a Handheld Robotic Device for Peripheral Catheterization1
Design and Implementation of a Computer-Controlled Hybrid Oscillatory Ventilator1
A Modular Magnetic Resonance Imaging-Compatible Pipette Simulator to Evaluate How Design Affects the Basilar Thumb Joint Mechanics1
A New Test Method for In Vitro Evaluation of Pedicle Screw Loosening Potential1
Investigating the User Experience Design of Home Ventilators Through the Lens of Kansei Engineering1
Electronics-Free Soft Robotic Knee Brace for Dynamic Unloading During Gait for Knee Osteoarthritis: A Proof-of-Concept Study1
Development of an Anatomically Accurate Three-Dimensional Simulation Model for Pediatric Central Line Placement1
Development and Mechanical Testing of Implant for Cranial Reconstruction After Burr Hole Trepanation1
Feasibility of a Wearable Soft Robot Triggered by Brain-Computer Interface for Stroke Upper Extremity Rehabilitation1
A Conformable Two-Dimensional Resistance Temperature Detector for Measuring Average Skin Temperature1
Fatigue Analysis of Nitinol Peripheral Artery Stents Under Complex Loads1
Comanipulation Robotic Platform for Spine Surgery With Exteroceptive Visual Coupling: Development and Experimentation1
0.035645008087158