Tissue Engineering Part C-Methods

Papers
(The median citation count of Tissue Engineering Part C-Methods is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Standardization and Supervision of Tissue Engineered Medical Products in China53
An Optimized Method for Microcomputed Tomography Analysis of Trabecular Parameters of Metal Scaffolds for Bone Ingrowth50
Technical Notes for Establishing a Cervical Fusion Model in Goats Based on Distinctive Anatomy38
Study on the Effect of Type III Recombinant Humanized Collagen on Human Vascular Endothelial Cells38
A New Method for Modeling Rabbit Growth Plate Injury for the Study of Tissue Engineering Scaffolds23
Call for Papers: Revolutionizing Regenerative Research Strategies Towards Precision Medicine from the Asia-Pacific Region19
Potential Use of Extracellular Vesicles in the Treatment of Intervertebral Disc Degeneration18
Procedure of Adult Porcine Islet Isolation17
Tissue Engineering, Methods Welcomes Protocols as a New Manuscript Type15
Rodent Model for Orthotopic Implantation of Engineered Liver Devices15
Correction to: Implanted Tissue-Engineered Vascular Graft Cell Isolation with Single-Cell RNA Sequencing Analysis, by Mirhaidari et al. Tissue Engineering Part C: Methods 2023;29(2):72–84; doi:14
A Message from the Editors-in Chief of Tissue Engineering14
The Foreign Body Response to an Implantable Therapeutic Reservoir in a Diabetic Rodent Model13
Whole Tooth Regeneration: Can Animal Studies be Translated into Clinical Application?13
Comparison of Osteogenic Capacity and Osteoinduction of Adipose Tissue-Derived Cell Populations12
Acknowledgment of Reviewers 202312
Impact of Cyclic Strain on Elastin Synthesis in a 3D Human Myometrial Culture Model12
Editorial for Special Issue on “New Strategies in Biomaterials Design for Tissue Regeneration”11
Call for Papers: Biomaterials and Cell Strategies for Regenerative Dentistry11
In Vivo Partial Oxygen Pressure Assessment in Subcutaneous and Intraperitoneal Sites Using Imaging of Solid Oxygen Probe11
Animal Models of Femur Head Necrosis for Tissue Engineering and Biomaterials Research10
Trends and Advances in Antimicrobial Surface Modification for Orthopedic Implants (2014–2024)10
Growth Differentiation Factor 5-Induced Mesenchymal Stromal Cells Enhance Tendon Healing9
Umbilical Cord Mesenchymal Stem Cells Seeded on Small Intestinal Submucosa to Repair the Uterine Wall Injuries9
Strategies to Induce Blood Vessel Ingrowth into Skin Grafts and Tissue-Engineered Substitutes9
An In Vitro Model to Test the Influence of Immune Cell Secretome on Mesenchymal Stromal Cell Osteogenic Differentiation9
Synthetic Bone Blocks Produced by Additive Manufacturing in the Repair of Critical Bone Defects9
Optimization of Freeform Reversible Embedding of Suspended Hydrogel Microspheres for Substantially Improved Three-Dimensional Bioprinting Capabilities9
Detergent-Free Decellularization Preserves the Mechanical and Biological Integrity of Murine Tendon8
Coating 3D-Printed Bioceramics with Histatin Promotes Adhesion and Osteogenesis of Stem Cells8
Development of a Rat Model of Fasciotomy Treatment for Compartment Syndrome8
Special Issue: Immunomodulatory Methods Toward Tissue Regeneration8
A Bibliometric Analysis of Research on Decellularized Matrix for Two Decades8
Effects of Stromal Cell Conditioned Medium and Antipurinergic Treatment on Macrophage Phenotype8
A Preclinical Animal Model for the Study of Scaffold-Guided Breast Tissue Engineering8
Bone Regeneration Exploiting Corticoperiosteal Tissue Transfer for Scaffold-Guided Bone Regeneration8
A Porcine Model Using Adipose Stem Cell-Loaded Scaffolds for Alveolar Ridge Augmentation7
Patient-Derived Lung Cancer “Sandwich Cultures” with a Preserved Tumor Microenvironment7
Call for Special Issue Papers: New Strategies in Biomaterials Design for Tissue Regeneration7
Biodistribution and Safety Studies of a Bicistronic Plasmid for Nerve Repair7
Call for Special Issue Papers: New Strategies in Biomaterials Design for Tissue Regeneration7
Polydioxanone Enhances Bone Regeneration After Resection and Reconstruction of Rat Femur with rhBMP26
Cartilage Injury Repair by Human Umbilical Cord Wharton's Jelly/Hydrogel Combined with Chondrocyte6
The Hollow Porous Sphere Cell Carrier for the Dynamic Three-Dimensional Cell Culture6
Neuromuscular Junction Model Optimized for Electrical Platforms6
In VitroCarcinogenicity Test of a Copper-Containing Intrauterine Device6
Tissue Engineering and Cell Therapy for Cartilage Repair: Preclinical Evaluation Methods5
Microfluidic Separation of Canine Adipose-Derived Mesenchymal Stromal Cells5
Call for Special Issue Papers: Special Issue for Prof. James Kirkpatrick in Honor of his Achievements in Tissue Engineering/Regenerative Medicine5
Noninvasive Optical Assessment of Implanted Tissue-Engineered Construct Success In Situ5
Young TSPC-Derived Exosomal circPVT1 Ameliorates Aging-Impaired Cell Function via SIRT1/NF-κB5
Pretreatment with Inflammatory Factors Altered the Secretome of Human Amniotic Epithelial Cells5
The Advantages and Shortcomings of Stem Cell Therapy for Enhanced Bone Healing5
A Practical Procedure for the In Vitro Generation of Human Osteoclasts and Their Characterization5
Characterization of Nerve Damage After an Injury to the Adjacent Soft Tissue: A Pilot Animal Study5
Kidney Mesenchymal Stem Cell Differentiation: Effect of Scaffold and Basic Fibroblast Growth Factor5
TNF-α and OSX mRNA of Salivary Small Extracellular Vesicles in Periodontitis: A Pilot Study5
Ozone Improved Bone Dynamic of Female Rats Using Zoledronate5
Visualization of Apoptosis in Three-Dimensional Cell Aggregates Based on Molecular Beacon Imaging5
Single-Step 3D Bioprinting of Alginate–Collagen Type I Hydrogel Fiber Rings to Promote Angiogenic Network Formation4
Exploring the Use of Water-Extracted Flaxseed Hydrocolloids in Three-Dimensional Cell Culture4
Perfuse and Reuse: A Low-Cost Three-Dimensional-Printed Perfusion Bioreactor for Tissue Engineering4
Design of an Innovative Method for Measuring the Contractile Behavior of Engineered Tissues4
Physical and Natural Crosslinking Approaches on Three-Dimensional Gelatin Microspheres for Cartilage Regeneration4
Rosalind Franklin Society Proudly Announces the 2023 Award Recipient for Tissue Engineering Part C4
Robust, Automated Analysis of Electrophysiology in Induced Pluripotent Stem Cell-Derived Micro-Heart Muscle for Drug Toxicity4
Challenges and Tissue Engineering Strategies of Periodontal-Guided Tissue Regeneration4
Intratumor Injection of Thermosensitive Polypeptide with Resveratrol Inhibits Glioblastoma Growth4
Hydrothermal Extraction and Characterization of Natural Hydroxyapatite from Waste Bovine Femur Bone4
Isolation and Characterization of Porcine Endocardial Endothelial Cells4
Development of 3D Muscle Cell Culture-Based Screening System for Metabolic Syndrome Drug Research4
Novel Sheep Model to Assess Critical-Sized Bone Regeneration with Periosteum for In Vivo Bioreactors4
The Safety of Adiponectin Receptor Agonist AdipoRon in a Rabbit Model of Arthrofibrosis4
The Development of Small-Caliber Vascular Grafts Using Human Umbilical Artery: An Evaluation of Methods3
Effect of Preoperative Chemotherapy on the Isolation Outcome of Primary Human Hepatocytes3
Characterization of Acellular Cartilage Matrix-Sodium Alginate Scaffolds in Various Proportions3
Editorial for Special Issue on Biomaterials and Cell Strategies for Regenerative Dentistry3
Construction of Human Three-Dimensional Lung Model Using Layer-by-Layer Method3
Call for Special Issue Papers: Bioprinting3
Preliminary Study on the Antigen-Removal from Extracellular Matrix via Different Decellularization3
Call for Special Issue Papers: New Strategies in Biomaterials Design for Tissue Regeneration3
Three-Dimensional Printing Bioceramic Scaffolds Using Direct-Ink-Writing for Craniomaxillofacial Bone Regeneration3
Lateral Bone Augmentation Using a Three-Dimensional-Printed Polymeric Chamber to Compare Biomaterials3
The Evolution and Future Trends of Stromal Vascular Fraction: A Bibliometric Analysis3
Culture of Primary Neurons from Dissociated and Cryopreserved Mouse Trigeminal Ganglion3
Three-Dimensional Idiopathic Pulmonary Fibrosis Model Using a Layer-by-Layer Cell Coating Technique3
Call for Papers: Revolutionizing Regenerative Research Strategies Towards Precision Medicine from the Asia-Pacific Region3
Fabrication, Rheological, and Compositional Characterization of Thermoresponsive Hydrogel from Cornea3
Auricular Chondrocytes as a Cell Source for Scaffold-Free Elastic Cartilage Tissue Engineering3
The Need of Standardized Methods, Protocols, and Directives for the Testing of Tissue Engineered Products3
Acknowledgment of Reviewers 20223
Call for Papers: Revolutionizing Regenerative Research Strategies Towards Precision Medicine from the Asia-Pacific Region3
Safety of Allogeneic Mesenchymal Stem Cell Seeding of NeuraGen Nerve Guides in a Rabbit Model3
MechAnalyze: An Algorithm for Standardization and Automation of Compression Test Analysis3
Frequently Used Strategies to Isolate Extracellular Matrix Proteins from Human Placenta and Adipose Tissue3
Toward a 3D Printed Perfusable Islet Embedding Structure: Technical Notes and Preliminary Results3
Editorial for Special Issue to Honor Prof. James Kirkpatrick3
Technique for Rapidly Forming Networks of Microvessel-Like Structures3
Preventing Sheep Carotid Artery Spasm for Vascular Graft Surgery and Computed Tomography Angiography2
Extracellular Vesicles for Immunomodulation in Tissue Regeneration2
Donor Heterogeneity in the Human Macrophage Response to a Biomaterial Under Hyperglycemia In Vitro2
Enhancement of Immunotherapies in Head and Neck Cancers Using Biomaterial-Based Treatment Strategies2
Decellularization Detergents As Methodological Variables in Mass Spectrometry of Stromal Matrices2
Effective Technical Protocol for Producing a Mono-Iodoacetate-Induced Temporomandibular Joint Osteoarthritis in a Rat Model2
Organalysis: Multifunctional Image Preprocessing and Analysis Software for Cardiac Organoid Studies2
Tissue-Engineered Oral Epithelium for Dental Material Testing: Toward In Vitro Biomimetic Models2
The Upscale Manufacture of Chondrocytes for Allogeneic Cartilage Therapies2
A Biocompatible Nanofibers Modified by Plasma for Osteoblast Growth Differentiation2
Clinically Relevant Mesenchymal Stem/Stromal Cell Sheet Transplantation Method for Kidney Disease1
Hyaluronan-Based Hydrogels for 3D Modeling of Tumor Tissues1
Acknowledgment of Reviewers 20211
Investigation and Optimization of Hydrogel Microneedles for Transdermal Delivery of Caffeine1
Call for Papers: Special Issue on Machine Learning in Tissue Engineering1
Editorial for Special Issue on “In Vivo Animal Models for Bone Tissue Regeneration”1
A Versatile Surgical Method for Studying Meniscus Implantation in a Rabbit Model1
A Comparative Study Between Porcine Peritoneum and Pericardium as Cardiovascular Material1
Construction of a Pig Alveolar Cleft Model in Imitation of Cleft Lip and Palate Congenital Deformity1
Quantitation of Collagen Type V in Tissues by High-Performance Liquid Chromatography Coupled to Mass Spectrometry1
Engineering High-Quality Cartilage Microtissues Using Hydrocortisone Functionalized Microwells1
Call for Papers: Special Issue on Modulation of the Immune System to Improve Tissue Regeneration Strategies1
Correction to: Special Issue: Immunomodulatory Methods Toward Tissue Regeneration, by Zhang et al. Tissue Engineering Part C: Methods 2022;28(8):375–376; doi: 10.1089/ten.tec.2022.29034.editori1
Global Evolution of Skeletal Muscle Tissue Engineering: A Scientometric Research1
Pigmented Full-Thickness Human Skin Model Based on a Fibroblast-Derived Matrix for Long-Term Studies1
Biomimetic Cardiac Fibrotic Model for Antifibrotic Drug Screening1
Use of High-Rate Ventilation Results in Enhanced Recellularization of Bioengineered Lung Scaffolds1
Developing a Cell-Microcarrier Tissue-Engineered Product for Muscle Repair Using a Bioreactor System1
High-Throughput Production of Microsponges from Platelet Lysate for Tissue Engineering Applications1
Study on the Umbilical Cord-Mesenchymal Stem Cell Manufacturing Using Clinical-Grade Culture Medium1
0.065298080444336