RSC Advances

Article	Citations
Novel environmental applications of green tea: sensing and remediation of Ag+ in aqueous system	435
Simple synthesis of 2-(phenylsulphinyl)benzo[d]oxazole derivatives via a silver-catalysed tandem condensation reaction	410
Research progress in the preparation of sodium-ion battery anode materials using ball milling	295
Correction: Development of a chromium oxide loaded mesoporous silica as an efficient catalyst for carbon dioxide-free production of ethylene oxide	262
Microwave-assisted synthesis and functionalization of 2-arylimidazo[1,2-a]pyrimidin-5(8H)-ones	257
Construction of 3D lithium metal anode using bi-functional composite separator: a new approach for lithium battery	251
Efficient adsorption performance of uranium in wastewater by novel MXene material TiVCTx and its aerogel composites	249
Self-diffusion and shear viscosity of pure 1-alkanol unary system: molecular dynamics simulation and review of experimental data	219
A novel nanodrug for the sensitization of photothermal chemotherapy for breast cancer in vitro	193
Effect of defect-healing treatment on layered silicate precursors toward well-defined crosslinked frameworks	187
Confined microemulsions: pore diameter induced change of the phase behavior	183
Synthesis and antibiotic potential of myxocoumarin-inspired chromene dione analogs	179
Nanostructured MnOx/g-C3N4 for photodegradation of sulfamethoxazole under visible light irradiation	174
A safe and efficient synthesis of N-Boc-β3-amino acid methyl esters from α-amino acids: applications in the formal synthesis of sedum alkaloids	171
Effect of surface modification on silica supported Ti catalysts for cyclohexene oxidation with vapor-phase hydrogen peroxide	169
Effect of incorporating white pepper (Piper nigrum L.) oleoresin on starch/alginate films	168
Tribological behaviors of an attapulgite–graphene nanocomposite as an additive for mineral lubricating oil	164
In vivo and in silico evaluation of the phytoalexin-eliciting activity in common bean (Phaseolus vulgaris L.) of jasmonoyl-l-isoleucine analogs having a pyrazolidin-3-o	158
Upgrading furfural to bio-fuels using supported molybdenum carbides: study of the support effect	150
Safety evaluation of Plukenetia volubilis seeds: a metabolomic profiling and network toxicology approach	148
Towards biotechnological production of bio-based low molecular weight esters: a patent review	144
Scalemic myrionsumamide A, tetracyclic skeleton alkaloids from Myrioneuron effusum	138
Noble metal-free ternary cobalt–nickel phosphides for enhanced photocatalytic dye-sensitized hydrogen evolution and catalytic mechanism investigation	137
Predicting rejection of emerging contaminants through RO membrane filtration based on ANN-QSAR modeling approach: trends in molecular descriptors and structures towards rejections	134
Evaluation of quantum chemistry calculation methods for conformational analysis of organic molecules using A-value estimation as a benchmark test	126

Eco-friendly and efficient catalyst-free synthesis of N-sulfonylimines from sulfonamides and aldehydes: crucial role of Al2O3 as a reusable dehydrating agent	122
Combined aza-Michael and radical photopolymerization reactions for enhanced mechanical properties of 3D printed shape memory polymers	122
Application of 3D printing technology for green synthesis of Fe2O3using ABS/TPU/chlorella skeletons for methyl orange removal	119
Evaluation of dual potentiality of 2,4,5-trisubstituted oxazole derivatives as aquaporin-4 inhibitors and anti-inflammatory agents in lung cells	119
Enhanced Fe(ii)/Fe(iii) cycle by boron enabled efficient Cr(vi) removal with microscale zero-valent iron	119
Construction of multifunctional carboxymethyl cellulose nanohydrogel carriers based on near-infrared DNA-templated quantum dots for tumor theranostics	118
Aqueous/non-aqueous electrolyte tradeoffs in charge transfer and electrochromics of pseudocapacitive oxide films	115
Optimized nano-metal particles filled into carbon nanohorns to achieve high N-doping amount and high porosity for enhanced oxygen evolution reaction	112
Electronic effects on the mechanism of the NAD+ coenzyme reduction catalysed by a non-organometallic ruthenium(ii) polypyridyl amine complex in the presence of formate	111
Carbon dots using a household cleaning liquid as a dopant for iron detection in hydroponic systems	108
A novel μ3-CO3 bridged linear polymeric Cu-complex ([Cu3(DMAP)8(μ3-CO3)2]I2)n·xH2<	107
A photothermal MoS2 decorated biomass carbon-based aerogel with a directionally aligned porous structure for mitigating heavy metal stress under seawater acidification	106
One-step fabrication of three-dimensional macropore copolymer-modified polycarbonate array by photo-crosslinking for protein immunoassay	104
Highly sensitive ultra-performance liquid chromatography coupled with triple quadrupole mass spectrometry detection method for levoglucosan based on Na+ enhancing its ionization efficiency	103
Investigation of crystal field effects for the spectral broadening of Yb3+-doped LuxY2−xO3 sesquioxide crystals	103
Oxa-Michael-based divergent synthesis of artificial glutamate analogs	102
CO2-laser-induced carbonization of calcium chloride-treated chitin nanopaper for applications in solar thermal heating	102
Enhanced stability and tunable photoluminescence in Mn2+-doped one-dimensional hybrid lead halide perovskites for high-performance white light emitting diodes	100
High-efficiency detection of primary amine-based chiral molecules by a facile aldimine condensation reaction	100
Four newly synthesized enones induce mitochondrial-mediated apoptosis and G2/M cell cycle arrest in colorectal and cervical cancer cells	99
Diastereoselective C-alkylation of aldimines, derived from chiral α-carbon heteroatom-substituted aldehydes, with triethylborane. Application to the synthesis of benzylisoquinolines	97
Physical insights into the Au growth on the surface of a LaAlO3/SrTiO3 heterointerface	96
Correction: Thiophene derivatives as corrosion inhibitors for 2024-T3 aluminum alloy in hydrochloric acid medium	95
High thermoelectric performance in metal phosphides MP2 (M = Co, Rh and Ir): a theoretical prediction from first-principles calculations	95
Photoactive Zr-aromatic hybrid thin films made by molecular layer deposition	94
Alkyne-tethered oligodeoxynucleotides that allow simultaneous detection of multiple DNA/RNA targets using Raman spectroscopy	94
Synthesis of benzo[b]furans from alkynyl sulfoxides and phenols by the interrupted Pummerer reaction	92
The formation mechanism of fibrous metal oxalate prepared by ammonia coordination method	92
An energy decomposition and extrapolation scheme for evaluating electron transfer rate constants: a case study on electron self-exchange reactions of transition metal complexes	92
An expedient metal-free cascade route to chromonyl diene scaffolds: thermodynamic vs. kinetic control	89
Influence of ITO electrode on the electrochromic performance outcomes of viologen-functionalized polyhedral oligomeric silsesquioxanes	89
Efficient dispersive solid-phase extraction of methylprednisolone from exhaled breath of COVID-19 patients	89
Exploiting poly(safranine) and poly(luminol) for sensing applications. A mini review	88
Atomic-level investigation on the oxidation efficiency and corrosion resistance of lithium enhanced by the addition of two dimensional materials	88
Reactions of noble-metal oxides in ionic liquids near room temperature	88
Polarization enhanced photoresponse of InSe via 2D ferroelectric CuCrP2S6	87
Synergistic effect of porous carbon shell confinement and catalytic conversion of nickel nanoparticle cores for improved lithium–sulfur batteries	86
A novel modified nano-alumina composite sol for potential application in forest firefighting	86
Uranyl nitrate as a recyclable homogeneous photocatalyst for selective cross-coupling of N-substituted amines and indoles	85
Cheminformatics analysis of molecular datasets of transcription factors associated with quorum sensing inPseudomonas aeruginosa	84
Spirocyclic side chain of a non-fullerene acceptor enables efficient organic solar cells with reduced recombination loss and energetic disorder	84
Establishing a UHPLC-MS/MS method for evaluation of the influence of stir-frying on the pharmacokinetics of seven compounds in Arctii Fructus	84
Microstructure and corrosion behavior of Al95−xNixY5 (x = 7,10) glassy ribbons	83
High-performance SiGe anode materials obtained by dealloying a Sr-modified Al–Si–Ge eutectic precursor	83
Preparation and characterization of permeability and mechanical properties of three-dimensional porous stainless steel	82
An attempt to prepare sulfonyl analogues of fotemustine: unexpected rearrangement to sulfamate during nitrosation step	82
A rapid construction of 1,3,2-benzodiazaborininones [R–B(aam)] from boronic acids and anthranilamides	80
Correction: Elucidation of hydrogen bonding formation by a computational, FT-IR spectroscopic and theoretical study between benzyl alcohol and isomeric cresols	80
Correction: Enhanced performance of porous forward osmosis (FO) membrane in the treatment of oily wastewater containing HPAM by the incorporation of palygorskite	79
Correction: From micro/nano structured isotactic polypropylene to a multifunctional low-density nanoporous medium	79

Expression of Concern: Construction of a binary S-scheme S-g-C3N4/Co-ZF heterojunction with enhanced spatial charge separation for sunlight-driven photocatalytic performance	79
Correction: Insight into mineralizer modified and tailored scorodite crystal characteristics and leachability for arsenic-rich smelter wastewater stabilization	79
Correction: The influence of bicarbonate concentration and ionic strength on peroxide speciation and overall reactivity towards UO2	77
Correction: Optical properties and photoactivity of carbon nanodots synthesized from olive solid wastes at different carbonization temperatures	77
Correction: Effects of Ni precursors on the formation of Mg–Fe–Ni intermetallic hydrides, kinetics, and reversibility	76
Expression of concern: Impact of some pyrrolidinium ionic liquids on copper dissolution behavior in acidic environment: experimental, morphological and theoretical insights	75
A silica-supported palladium oxide catalyst (PdO@MCM-41) selectively cleaves ether linkages in lignin model compounds and alkali lignin via intramolecular hydrogen transfer	74
Correction: The influence of electron utilization pathways on photosystem I photochemistry in Synechocystis sp. PCC 6803	74
Preparation of SA/P(U-AM-ChCl) composite hydrogels by frontal polymerization and its performance study	74
Dihydropyrimidine-2-thione derivatives as SARS-CoV-2 main protease inhibitors: synthesis, SAR and in vitro profiling	74
Boronic acid-functionalized Fe3O4 nanoparticles for activity-preserved enrichment of low-abundance bacteria from real samples	73
Neutron, X-ray diffraction, DSC, Raman, Mössbauer and leaching studies of iron phosphate glasses and crystalline phases	73
Vinasse photoreforming for hydrogen production using Pt/TiO2 as catalyst under UV irradiation	73
Utilization of non-plasticized polymer inclusion membrane for highly selective colorimetric sensor detection of zirconium in environmental samples	72
Effect of honey, as a natural deep eutectic solvent, on the phytochemical stability and anti-inflammatory activity of Eurycoma longifolia Jack	72
Efficient enzymatic synthesis of chiral 2,3-dihydro-1,4-benzodioxane motif using engineered Candida antarctica lipase B	71
Bridging the size gap between experiment and theory: large-scale DFT calculations on realistic sized Pd particles for acetylene hydrogenation	71
Construction of one-dimensional MoO2/NC heteronanowires for microwave absorption	70
Nanoarchitectonics of carbon molecular sieve membranes with graphene oxide and polyimide for hydrogen purification	70
3D-printed silicon nitride ceramic implants for clinical applications: the state of the art and prospects	70
Li4Ti5O12@carbon nanotube arrays as high-performance anode for Li-ion batteries	70
Cardiac glycosides from Digitalis lanata and their cytotoxic activities	70
Synthesis, characterization, and in vitro anti-cholinesterase screening of novel indole amines	70
Extracting higher-conductivity designs for solid polymer electrolytes by quantum-inspired annealing	70
Rational design of mixed Sn–Ge based hybrid halide perovskites for optoelectronic applications: a first principles study	70
Tuning the physical properties of SnO2 quantum dots via Ag-doping for fabricating efficient photodetectors	69
Selectivity profile comparison for certain γ-butyrolactone and oxazolidinone-based ligands on a sigma 2 receptor over sigma 1: a molecular docking approach	69
Pressure-dependent physical properties of cesium–niobium oxide: a comprehensive study	69
Production and processing of zein nanoparticles as structural colorants	68
Pilot production of a sensitive ELISA kit and an immunochromatographic strip for rapid detecting citrinin in fermented rice	68
PVDF-based solid polymer electrolytes for lithium-ion batteries: strategies in composites, blends, dielectric engineering, and machine learning approaches	68
Fluorene- and fluorenone-based molecules as electron-transporting SAMs for photovoltaic devices	67
Recent advancements in the multicomponent synthesis of heterocycles integrated with a pyrano[2,3-d]pyrimidine core	67
A nonsolvolytic fluorine/LiNO3-containing electrolyte for stabilizing dynamic interfaces in Li||LiMn2O4 batteries	67
Reaction-based energy level modulation of a cyclometalated iridium complex for electrochemiluminescent detection of formaldehyde	67
Towards the activity of twisted acyclic amides	66
Hierarchical hollow-tubular porous carbon microtubes prepared via a mild method for supercapacitor electrode materials with high volumetric capacitance	66
Study on preparation and performance of cement-stabilized macadam containing ground sludge gasification slag (GSGS)	66
Amino acid assisted synthesis of CDs: a novel paradigm in plant tissue culture media for enhanced cellular effects and biotechnological advancements	66
Hydrogen-bond super-amphiphile based drug delivery system: design, synthesis, and biological evaluation	66
Composition of the isopropanol-soluble portion and fast pyrolysis product distribution of the insoluble part from Pakistani lignite	65
Superior nanopatterns via adjustable nanoimprint lithography on aluminum oxide in high-K thin films with ultraviolet curable polymer	65
Application of perovskite type oxide LaxCe1−xcoo3 in lignin depolymerization and mono-phenol preparation	65
Application of biodegradable cholinium ionic liquids for the extraction of 5-hydroxymethylfurfural (HMF) from honey	64
Copper-promoted oxidative mono- and di-bromination of 8-aminoquinoline amides with HBr and DMSO	64
Injectable, self-healing and degradable dynamic hydrogels with tunable mechanical properties and stability by thermal-induced micellization	64
Surface modulation for highly efficient and stable perovskite solar cells	63
Synthesis, docking and biological evaluation of purine-5-N-isosteresas anti-inflammatory agents	63
Engineering the defects of UiO-66 MOF for an improved catalytic detoxification of CWA simulant: methyl paraoxon	63
Sensitive immunosensing of α-synuclein protein in human plasma samples using gold nanoparticles conjugated with graphene: an innovative immuno-platform towards early stage identification of Parkinson'	63
Nanoclay-reinforced alginate aerogels: preparation and properties	63
Misorientation statistics across hot-deformed Nd2Fe14B permanent magnet boundaries and the potential correlation with magnetic properties	63
Introduction to the RSC Advances themed collection on nano and microscale modifications of biomaterials	62
Quantitative and equipment-free paper-based agglutination assay of bacterial cells	62
Synthesis of two novel neutral polymeric bonding agents to enhance the mechanical properties of composite solid propellants	62
Design, synthesis, and antiproliferative screening of new quinoline derivatives bearing a cis-vinyl triamide motif as apoptosis activators and EGFR-TK inhibitors	62
Facile one-pot hydrothermal synthesis of a zinc oxide/curcumin nanocomposite with enhanced toxic activity against breast cancer cells	61
The mineral manaksite, KNaMnSi4O10, as a supercapattery-type electrochemical energy storage material	61
Upconversion nanoparticle-based aptasensor for rapid and ultrasensitive detection of Staphylococcus aureus by low-speed centrifugation	61
Eco-friendly fabrication of sandwich-structured poly(imide-siloxane)/silver nanowire composite films for stretchable strain sensors	61
Kinetics and mechanisms of flumequine degradation by sulfate radical based AOP in different water samples containing inorganic anions	61
CdO decorated CdS nanorod for enhanced photocatalytic reduction of CO2 to CO	60
From waste to energy storage: fabrication of shape-stabilized phase change composites using cellulose extracted from waste paper	60
Electrochemical and power conversion performance of different counter electrode materials for flexible dye-sensitized solar cells	60
Retraction: The iron group transition-metal (Fe, Ru, Os) coordination of Se-doped graphitic carbon (Se@g-C3N4) nanostructures for the smart therapeutic delivery of zidovudine (ZV	60
Simple manual roller pump-driven valve-free microfluidic solution exchange system for urgent bioassay	60
Enhanced cycle life of starter lighting ignition (SLI) type lead–acid batteries with electrolyte modified by ionic liquid	60
Fabrication of highly luminescent red-emissive carbon dots and their enhancement of cotton growth promoted by La3+	60
Structural and luminescent properties of Dy3+-doped Ca3WO6 phosphors for white-light display applications	60
Manganese-based nanoparticles plus gambogic acid targeted hypoxic tumor microenvironment by enhancing ROS generation and provided antitumor treatment and improved immunotherapy	58
A brief review of mRNA therapeutics and delivery for bone tissue engineering	58
Analysis of the growth and physicochemical properties of the newly developed stilbazolium derivative 4-N,N-dimethylamino-4-N-methyl stilbazolium 2-formyl benzene sulfonate (DSFS)	58
Efficient removal of methyl orange and ciprofloxacin by reusable Eu–TiO2/PVDF membranes with adsorption and photocatalysis methods	58
Selective arrangement of three types of calcium–terbium tetranuclear cores by a thiacalixarene ligand using thermodynamic and kinetic strategies	57
Preconcentration and determination of trace Hg(ii) using ultrasound-assisted dispersive solid phase microextraction	57
MA’AT analysis of the O-glycosidic linkages of oligosaccharides using nonconventional NMR J-couplings: MA’AT and MD models of phi	57
A biomimetic nano-NET strategy for the treatment of MRSA-related implant-associated infection	57
Layered double hydroxide based composite core–shell electrospun nanofibers for lead and fluoride filtration from contaminated streams	57
Synaptic plasticity and learning behaviour in multilevel memristive devices	57
Bio-based unsaturated polyester resin from post-consumer PET	57

MOFabric: an effective and wearable protective garment towards CWA detoxification	57
Retraction: Adsorption and sensor performance of transition metal-decorated zirconium-doped silicon carbide nanotubes for NO2 gas application: a computational insight	57
Unraveling the photophysical characteristics and biological applications of vinyl sulfones as viscosity sensors	56
Advancements in nanotechnology-driven photodynamic and photothermal therapies: mechanistic insights and synergistic approaches for cancer treatment	56
Operando Raman spectroscopy for investigating lithium deposition/dissolution and diffusion at the microelectrode surface	56
A facile aqueous production of bisphosphonated-polyelectrolyte functionalized magnetite nanoparticles for pH-specific targeting of acidic-bone cells	56
One-pot hydrothermal synthesis of metal-doped carbon dot nanozymes using protein cages as precursors	56
Green synthesis of novel 5-amino-bispyrazole-4-carbonitriles using a recyclable Fe3O4@SiO2@vanillin@thioglycolic acid nano-catalyst	56
Effect of surfactant concentration on the evaporation-driven deposition of carbon nanotubes: from coffee-ring effect to strain sensing	56
Multiplex one-step direct asymmetric PCR of blood and dual-labelled probe-mediated melting curve for genotyping of MTHFR and MTRR polymorphisms	56
Intriguing interfacial characteristics of the CS contact with MX2 (M = Mo, W; X = S, Se, Te) and MXY ((X ≠ Y) = S, Se, Te) monolayers	55
Evaluation of blood pressure using a flexible and wearable capacitive pressure sensor	55
Production of biologically active hydroxytyrosol rich extract via catalytic conversion of tyrosol	55
Surface modification and characterization of waste derived carbon particles to reinforce photo-cured shape memory composites	55
Ligand-assisted morphology regulation of AuNi bimetallic nanocrystals for efficient hydrogen evolution	55
Ultrasonic-induced synthesis of novel diverse arylidenes via Knoevenagel condensation reaction. Antitumor, QSAR, docking and DFT assessment	55
Production of high-quality and large lateral-size black phosphorus nanoparticles/nanosheets by liquid-phase exfoliation	55
Preparation and characterization of attapulgite-supported phase change energy storage materials	55
Enhancing the corrosion inhibition of copper sheets in oil-in-water (O/W) emulsions by combining two organic heterocyclic derivatives	55
Curcumin loaded Ag–TiO2-halloysite nanotubes platform for combined chemo-photodynamic therapy treatment of cancer cells	55
Effect of impregnation strategy on structural characteristics of Ce–Mn/Al2O3 and its catalytic ozonation of benzoic acid	55
Preparation of geometrically highly controlled Ga particle arrays on quasi-planar nanostructured surfaces as a SCALMS model system	54
Molecular dynamics simulation insights into the cellular uptake of elastic nanoparticles through human pulmonary surfactant	54
Removal of active pharmaceutical compounds in Primalan and Diane using pumpkin biochar: synthesis, characterization, and adsorption study	54
An environment-friendly approach using deep eutectic solvent combined with liquid–liquid microextraction based on solidification of floating organic droplets for simultaneous determination of preserva	54
Enhanced fluoride removal from drinking water by activated carbon supported Ce–Al oxides: performance and mechanism	54
Selective removal and recovery of Ni(ii) using a sulfonic acid-based magnetic rattle-type ion-imprinted polymer: adsorption performance and mechanisms	54
Direct synthesis of carbamates, thiocarbamates, and ureas from Boc-protected amines: a sustainable and efficient approach	53
Preparation of a robust hierarchical superhydrophobic surface with superior corrosion resistance	53
Experimental and in silico insights: interaction of dimethyl sulphoxide with 1-hexyl-2-methyl imidazolium bromide/1-octyl-2-methyl imidazolium bromide at different temperatures	53
De novo creation of fluorescent molecules via adversarial generative modeling	53
Synthesis of bimetallic nickel cobalt selenide particles for high-performance hybrid supercapacitors	53
Material characterization and biocompatibility of polycarbonate-based polyurethane for biomedical implant applications	53
Reductive degradation of carbon tetrachloride using tree leaf polyphenol–iron complexes for groundwater remediation	52
Development of a cationic polyethyleneimine-poly(lactic-co-glycolic acid) nanoparticle system for enhanced intracellular delivery of biologics	52
Solvent-mediated crystallization and defect passivation mechanisms in ambient-air MAPbI3 films: a combined experimental and simulation study	52
Tuning the affinity of amphiphilic guest molecules in a supramolecular polymer transient network	52
Electrolytic reduction of CrF3 and Cr2O3 in molten fluoride salt	52
Mesoporous acidic polymeric ionic liquids as novel solid acids for catalytic hydrolysis of ketoxime reactions	52
Molecular insight into oil displacement by CO2 flooding in water-cut dead-end nanopores	52
A designed miniature sensor for the trace level detection and degradation studies of the toxic dye Rhodamine B	51
Accurate assembly of thiophene-bridged titanium-oxo clusters with photocatalytic amine oxidation activity	51
Dansyl fluorophore functionalized hierarchically structured mesoporous silica nanoparticles as novel latent fingerprint development agents	51
Synthesis and mechanism of biological action of morpholinyl-bearing arylsquaramides as small-molecule lysosomal pH modulators	51
Graphene oxide:Fe2O3 nanocomposites for photodetector applications: experimental and ab initio density functional theory study	51
Novel one-pot synthesis of a library of 2-aryloxy-1,4-naphthoquinone derivatives. Determination of antifungal and antibacterial activity	50
Designing a green poly(β-amino ester) for the delivery of nicotinamide drugs with biological activities and conducting a DFT investigation	50
Synthesis and biological evaluation of capsaicin analogues as antioxidant and neuroprotective agents	50
Nanoscale carbon dot-embedded metal–organic framework for turn-on fluorescence detection of water in organic solvents	50
MXene-based composites against antibiotic-resistant bacteria: current trends and future perspectives	49
Development of Vang Danh anthracite as a cost-effective anode for sodium-ion batteries through a heat-treatment process	49
Recent developments in hydrogels containing copper and palladium for the catalytic reduction/degradation of organic pollutants	49
Microwave-enhanced antibacterial activity of polydopamine–silver hybrid nanoparticles	49
Towards green, scalable peptide synthesis: leveraging DEG-crosslinked polystyrene resins to overcome hydrophobicity challenges	49
MXenes from MAX phases: synthesis, hybridization, and advances in supercapacitor applications	49
Synthesis and characterization of novel poly cysteine methacrylate nanoparticles and their morphology and size studies	48
Cr(vi) permanently binds to the lipid bilayer in an inverted hexagonal phase throughout the reduction process	48
Novel A-π-D-A organic dyes for better photovoltaic performance	48
Highly bright solid-state carbon dots for efficient anticounterfeiting	48
A new method for simultaneous determination of 14 phenolic acids in agricultural soils by multiwavelength HPLC-PDA analysis	48
Preparation and corrosion resistance of superhydrophobic Ni–Co–Al2O3 coating on X100 steel	48
Sustainable production of catechol derivatives from waste tung nutshell C/G-type lignin via heterogeneous Cu–NC catalytic oxidation	48
A novel magnetite C18/paracetamol/alginate adsorbent bead for simultaneous extraction of synthetic antioxidants and bisphenol A in water samples	48
Micropatterned superhydrophobic meshes coated with low-cost carbon nanoparticles for efficient oil/water separation	47
Adsorption of cationic surfactant as a probe of the montmorillonite surface reactivity in the alginate hydrogel composites	47
Membraneless ethanol fuel cell Pt–Sn–Re nano active catalyst on a mesoporous carbon support	47
Preparation of cyclodextrin polymer-functionalized polyaniline/MXene composites for high-performance supercapacitor	47
Molecular modeling and DFT studies on the antioxidant activity ofCentaurea scopariaflavonoids and molecular dynamics simulation of their interaction with β-lactoglobulin	47
Improving the properties of Fe2O3 by a sparking method under a uniform magnetic field for a high-performance humidity sensor	47
Influence of Co2+, Cu2+, Ni2+, Zn2+, and Ga3+ on the iron-based trimetallic layered double hydroxides for water oxidation	47
Insights into the gelatinization of potato starch by in situ1H NMR	47
RP-HPLC method development and validation for the quantification of prednisolone and salbutamol with their simultaneous removal from water using modified clay–activated carbon adsorbents	47
Layer-by-layer assembly of tetra-Mn-containing 30-tungsto-4-phosphate, [M4(H2O)2(P2W15O56)2]n− (M = Mn	46
3D printing in microfluidics: experimental optimization of droplet size and generation time through flow focusing, phase, and geometry variation	46
Insight into the hetero-interactions of 4-nonylphenol with dissolved organic matter: multiple spectroscopic methods, 1H NMR study and principal component analysis	46
Optimizing adsorption and photocatalysis for tetracycline and sulfamethoxazole removal: the role of Ag+ and NH4+ in Bi-MOF derivatives	46
Contra-thermodynamic halolactonization of lactam-tethered 5-aryl-4(E)-pentenoic acids for the flexible and stereocontrolled synthesis of fused lactam-halolactones	46
Desorption and ablation regimes in UV-MALDI: the critical fluence	46
A theoretical analysis of the vibrational modes of ammonium metavanadate	46
Enhanced total flavonoid accumulation and alleviated growth inhibition of germinating soybeans by GABA under UV-B stress	46
Strain hardening in biaxially stretched elastomers undergoing strain-induced crystallization	45
Rapid and sensitive electrochemiluminescence detection using easily fabricated sensor with an integrated two-electrode system	45
Preparation of nanocellulose and application of nanocellulose polyurethane composites	45
Massively synthesizable nickel-doped 1T-MoS2 nanosheet catalyst as an efficient tri-functional catalyst	45
Structural engineering of BiOBr nanosheets for boosted photodegradation performance toward rhodamine B	45
Benzodioxole grafted spirooxindole pyrrolidinyl derivatives: synthesis, characterization, molecular docking and anti-diabetic activity	45
Organic dye-loaded reduced titanium dioxide as a broadband saturable absorber for ultrafast fiber lasers	45
Photocatalytic activity of layered MoS2 in the reductive degradation of bromophenol blue	44
Directed molecular structure design of coordination polymers with different ligands for regulating output performance of triboelectric nanogenerators	44
A novel LC-MS/MS method for simultaneous estimation of acalabrutinib and its active metabolite acalabrutinib M27 in human plasma and application to a human pharmacokinetic study	44
Nanomicrosphere sustained-release urokinase systems with antioxidant properties for deep vein thrombosis therapy	44
3D-printed bioactive ceramic scaffolds with MoSe2 nanocrystals as photothermal agents for bone tumor therapy	44
Adsorption of CO over the Heusler alloy CrCoIrGa(001) surface: first-principles insights	44
Insight into the dynamic transformation properties of microplastic-derived dissolved organic matter and its contribution to the formation of chlorination disinfection by-products	44
DRGD-linked charged EKKE dimeric dodecapeptide: pH-based amyloid nanostructures and their application in lead and uranium binding	44