Materials Horizons

Article	Citations
Outstanding Reviewers for Materials Horizons in 2023	258
Front cover	217
Enhanced performance in transparent conducting materials at the interface of a wide band gap semiconductor and a correlated metal	208
Reflections from Seth Marder on 10 years of Materials Horizons	185
Ferroelectricity driven interlayer magnetic phase transitions in van der Waals homobilayers	179
Correction: Preventing lead leakage in perovskite solar cells and modules with a low-cost and stable chemisorption coating	163
Back cover	161
Inside front cover	154
Materials Horizons Emerging Investigator Series: Prof. Dr Yandong Ma, Shandong University, China	139
Biological metasurfaces based on tailored Luria Bertani Agar growth medium formulations for photonic applications	133
Design principle of disordered rocksalt type overlithiated anode for high energy density batteries	126
Back cover	126
Materials Horizons Emerging Investigator Series: Professor Derek Ho, City University of Hong Kong, China	125
Back cover	117
Front cover	116
Inside back cover	114
Fluid mediated communication among flexible micro-posts in chemically reactive solutions	111
Visible light-initiated rapid self-healing of PDMS elastomers engineered through dual dynamic bonding networks for smart sensors	110
P–N switchable thermoelectric ionogels enabled by microphase separation for intelligent thermal sensing	109
Electronic properties of metal halide perovskites and their interfaces: the basics	107
Incarcerating bismuth nanoparticles into a thiol-laced metal–organic framework for electro and photocatalysis	106
Multifunctional sound-absorbing and mechanical metamaterials via a decoupled mechanism design approach	106
Biomimetic Janus photonic soft actuator with structural color self-reporting	105
Corrosion response of steels fabricated through arc directed energy deposition additive manufacturing: a review	104
Selective deconstruction of mixed plastics by a tailored organocatalyst	101

Bacterial cellulose-based functional yarns: from design to applications	100
2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications	99
A co-assembly strategy for the construction of robust, recyclable and multifunctional crosslinked metal–organic polyhedra using aromatic polyamides	99
Solution-processable and photo-programmable logic gate realized by organic non-volatile floating-gate photomemory	97
Nanoarchitected graphene/copper oxide nanoparticles/MoS2 ternary thin films as highly efficient electrodes for aqueous sodium-ion batteries	96
A sustainable approach to energy storage in buildings: the first rechargeable geopolymer-based battery	91
Organic chiral nano- and microfilaments: types, formation, and template applications	90
Materials Horizons Emerging Investigator Series: Dr Eunho Lee, Seoul National University of Science and Technology, Korea (the Republic of)	89
Inside front cover	88
Polyethylene glycol-decorated n-type conducting polymers with improved ion accessibility for high-performance organic electrochemical transistors	85
From binary AB to ternary ABC supraparticles	84
Bioinspired HOF-based luminescent skin sensor with triple mechanochromism responses for the recognition and collection of human biophysical signals	83
Recent advances of metal telluride anodes for high-performance lithium/sodium–ion batteries	83
Significantly enhanced high-temperature capacitive energy storage in cyclic olefin copolymer dielectric films via ultraviolet irradiation	83
Effect of Sc spatial distribution on the electronic and ferroelectric properties of AlScN	82
An implantable ionic therapeutic platform for photodynamic therapy with wireless capacitive power transfer	82
Synergistic improvement of sensing performance in ferroelectric transistor gas sensors using remnant polarization	81
In situ construction of multifunctional femtosecond laser-induced graphene on arbitrary substrates	81
Magnetic-field manipulation of circularly polarized photoluminescence in chiral perovskites	80
Framing emission gain layers for perovskite light-emitting diodes using polycaprolactone-silver nanoparticles featuring Förster resonance energy transfer and Purcell effects	80
Dynamic metal–ligand coordination enables a hydrogel with rewritable dual-mode pattern display	79
Customizing ZnIn2S4 photocatalysts by regulating sulfur sources for C(sp3)–H transformation	79
Photoelastic plasmonic metasurfaces with ultra-large near infrared spectral tuning	78
An advanced furoxan-bridged heat-resistant explosive	78
Advanced wood–inorganic composites: preparation, properties and perspectives	77
Catalytic amounts of sodium-sulfonate–naphthol enable mechanically robust, ultra-transparent, super-fire-resistant and easily recyclable polycarbonate	77
Unveiling the role of linear alkyl organic cations in 2D layered tin halide perovskite field-effect transistors	77
Recent advances in metal–organic frameworks for Li–O2 batteries: advantages, challenges, and innovative design	77
Are topological insulators promising thermoelectrics?	77
Entropy engineering enhances the electromagnetic wave absorption of high-entropy transition metal dichalcogenides/N-doped carbon nanofiber composites	76
A mechanically adaptive hydrogel neural interface based on silk fibroin for high-efficiency neural activity recording	75
Inside back cover	74
Back cover	73
Back cover	72
Inside back cover	71
Magnetoresistance effect of pyridine-capped s-indacene-based conjugated radicals	71
Horizons Community Board collection: antimicrobial materials and surfaces	70
Unraveling nanosprings: morphology control and mechanical characterization	68
On-demand design for elastic metamaterial based on a semi-analytical band gap rapid extraction method	68
Performance of ferrite nanoparticles in inductive heating swing adsorption (IHSA): how tailoring material properties can circumvent the design limitations of a system	68
Contents list	68
S-La2Mo2O9 solid solution: a sulfur cathode with a non-shaped matrix enables a better lithium–sulfur battery	67
Aluminothermic reduction of CeO2: mechanism of an economical route to aluminum–cerium alloys	67
Controllable topological phase transition via ferroelectric–paraelectric switching in a ferromagnetic single-layer MIMIIGe2X6 family	67
Mechanochemical grinding-enhanced olefin–olefin [2+2] cycloaddition in cyanostilbene derivatives: mechanistic dependence on halogen-based bonding	67
Bioinspired leaf vein-architected gold nanowire ecoflexible biosensors for ultrasensitive occlusal force monitoring	67
Inside front cover	66
Inside front cover	66
NestedAE: interpretable nested autoencoders for multi-scale materials characterization	66
Back cover	66

High green index electromagnetic interference shields with semiconducting Bi2S3 fillers in a PEDOT:PSS matrix	65
Contents list	65
Significant dielectric energy storage enhancement in layered polymer films with heterogeneous carbon/silica nanospheres	64
Precise manipulation of iron spin states in single-atom catalytic membranes for singlet oxygen selective production	64
Inside back cover	64
S-vacancy-assisted fast charge transport and oriented ReS2 growth in twin crystal ZnxCd1−xS: an atomic-level heterostructure for dual-functional photocat	64
Processable and controllable all-aqueous gels based on high internal phase water-in-water emulsions	63
Reticular chemistry-aided effective design of new second-order nonlinear optical selenites	63
Molecularly or atomically precise nanostructures for bio-applications: how far have we come?	63
Two-photon absorption in halide perovskites and their applications	63
High defect tolerance β-CsSnI3 perovskite light-emitting diodes	63
Developing real-time IoT-enabled next-generation fire alarm system using SrBi4Ti₄O₁₅/PDMS flexible triboelectric nanogenerator	63
Highly efficient electroplating of (220)-oriented nano-twinned copper in methanesulfonic copper baths	62
Recent advances in metal single-atom catalysts for ammonia electrosynthesis	62
Experimental and computational insights into CuS–Mg composites for high-performance p-type transparent conducting materials	62
Sustainable mechanochemical growth of double-network hydrogels supported by vascular-like perfusion	61
Direct Polymerization of Tyrosine Conjugates into Melanin-like Polymers for Efficient Protection of Photosensitive Pesticides	61
Evaporation-induced self-assembly of liquid crystal biopolymers	61
Optically addressable dielectric elastomer actuator arrays using embedded percolative networks of zinc oxide nanowires	61
Textile-integrated multilayer liquid metal soft circuits for multienvironment wearable electronics	61
Constructing abundant interfaces by decorating MoP quantum dots on CoP nanowires to induce electronic structure modulation for enhanced hydrogen evolution reaction	61
A data-driven approach to interfacial polymerization exploiting machine learning for predicting thin-film composite membrane formation	61
Assembled mechanical metamaterials with integrated functionalities of programmable multistability and multitransition behaviors	59
Treasure-bowl style bifunctional site in cerium–tungsten hetero-clusters for superior solar-driven hydrogen production	59
Applications of triarylborane materials in cell imaging and sensing of bio-relevant molecules such as DNA, RNA, and proteins	59
A mechanically robust spiral fiber with ionic–electronic coupling for multimodal energy harvesting	59
Highly elastic relaxor ferroelectrics for wearable energy storage	58
Ductile amorphous boron nitride microribbons	58
Competition of polar and antipolar states hidden behind a variety of polarization switching modes in hydrogen-bonded molecular chains	58
Soft, breathable, and recyclable MXene fabrics for wearable electrophysiological recordings	58
Additive-free molecular acceptor organic solar cells processed from a biorenewable solvent approaching 15% efficiency	58
Hyaluronic acid-based hydrogels modulate neuroinflammation and extracellular matrix remodelling in multiple sclerosis: insights from a primary cortical cell model	58
Dynamic self-assembly of small molecules enables the spontaneous fabrication of hole conductors at perovskite/electrode interfaces for over 22% stable inverted perovskite solar cells	57
Spotting the driving forces for SERS of two-dimensional nanomaterials	57
Conquering residual light absorption in the transmissive states of organic electrochromic materials	56
Synchronously boosting microwave-absorbing and heat-conducting capabilities in CeO2/Ce(OH)3 core–shell nanorods/nanofibers via Fe-doping amount control	56
Prospects of nanoparticle-based radioenhancement for radiotherapy	56
A natural polymer-based hydrogel with shape controllability and high toughness and its application to efficient osteochondral regeneration	56
A self-powered HgTe quantum dots/PBDB-T:Y6 bipolar broadband photodetector for logic gates	56
Environment-friendly copper-based chalcogenide thin film solar cells: status and perspectives	56
Nano-enabled dynamically responsive living acellular hydrogels	55
Correction: Solution-processed white OLEDs with power efficiency over 90 lm W−1 by triplet exciton management with a high triplet energy level interfacial exciplex host and a high reverse i	55
Dual functional coordination interactions enable fast polysulfide conversion and robust interphase for high-loading lithium–sulfur batteries	55
High density electron doping in boron-doped twisted bilayer graphene: a ladder to extended flat-band	55
Inside back cover	54
Nitroxide radical contrast agents for safe magnetic resonance imaging: progress, challenges, and perspectives	54
Back cover	54
Inside front cover	54
Inside front cover	54
Correction: Intelligent micro/nanorobots based on biotemplates	53
Materials Horizons Emerging Investigator Series: Prof. Dr Thomas Schutzius, ETH Zurich, Switzerland	53
A polymer-free, tumor-microenvironment responsive sol–gel platform for spatiotemporal STING activation and self-amplifying immunotherapy	52
High-performance reverse thermoresponsive hydrogel enabled by one-pot PDMS-enriched domain crosslinking	52
Advances in mechanically active materials for soft wearable electronics	52
Solvated ion transport in hierarchical tremella-like ionic membranes for low-power and high-sensitivity ethanol sensing	52
Intrinsic ferroelastic valleytronics in 2D Pd4X3Te3 (X = S, Se) materials: a new platform for ultrafast intervalley carrier dynamics	52
Correction: Regulating Zn2+/H+ selectivity through functional group design of separators for long-lifespan aqueous zinc batteries	51
Two-dimensional multifunctional metal–organic frameworks with large in-plane negative Poisson ratios and photocatalytic water splitting properties	51
Diagnosis of high-Ni NCA/Gr-Si cells before rapid capacity drop by monitoring the heterogeneous degradation	51
Galactosylated iron oxide nanoplatforms for targeted imaging and ferroptosis-enhanced glioblastoma therapy via immune modulation	50
Inside back cover	50
Correction: High-performance one-dimensional halide perovskite crossbar memristors and synapses for neuromorphic computing	49
Overcoming ACQ: DPA-modified TICT-type AIEgens for high-resolution and multilevel latent fingerprint visualization	49
LaOMS2 (M = Ti, V, and Cr): novel crystal spin valves without contact	49
Contents list	48
Integrating the atomically separated frontier molecular orbital distribution of two multiple resonance frameworks through a single bond for high-efficiency narrowband emission	48
3D grape string-like heterostructures enable high-efficiency sodium ion capture in Ti3C2Tx MXene/fungi-derived carbon nanoribbon hybrids	48
Multifunctional strain-activated liquid–metal composite films with electromechanical decoupling for stretchable electromagnetic shielding	48
Perfect absorption based on a ceramic anapole metamaterial	48
Highly transparent, intrinsically stretchable, photo-patternable, and vacuum-deposited electrodes for wearable sensors and displays	48
Intensive harmonized synapses with amorphous Cu2O-based memristors using ultrafine Cu nanoparticle sublayers formed via atomically controlled electrochemical pulse deposition	48
Back cover	47
Front cover	47
Inside front cover	47
Inside front cover	47
Front cover	47
Experiment-in-loop interactive optimization of polymer composites for “5G-and-beyond” communication technologies	47
Flexible, self-healing and portable supramolecular visualization smart sensors for monitoring and quantifying structural damage	46
Emerging fiber-based neural interfaces with conductive composites	46
Bismuth-based liquid metals: advances, applications, and prospects	46

Multifunctional nacre-like materials	46
γ-Ray-driven degradation of robust epoxy thermosets	46
A hydrogen radical pathway for efficacious electrochemical nitrate reduction to ammonia over an Fe-polyoxometalate/Cu electrocatalyst	45
Semiconducting and environmentally responsive melanin-doped silk nanofibers for multifunctional electronic tattoos	45
Sustainable scale resistance on a bioinspired synergistic microspine coating with a collectible liquid barrier	45
Mixed anion control of enhanced negative thermal expansion in the oxysulfide of PbTiO3	44
Developing extended visible light responsive polymeric carbon nitrides for photocatalytic and photoelectrocatalytic applications	44
Stabilizing molecular catalysts on metal oxide surfaces using molecular layer deposition for efficient water oxidation	44
Anion-induced robust ferroelectricity in sulfurized pseudo-rhombohedral epitaxial BiFeO3 thin films via polarization rotation	44
Toughening hydrogels with small molecules: tiny matter, big impact	44
Vesicle-based artificial cells: materials, construction methods and applications	44
4D printing of carbon-fiber-reinforced liquid crystal elastomers for self-deployable solar panels	44
Solar-light driven h-WO3/2H-WS2-microalgae derived photocatalyst for rapid multi-dye degradation	43
Kirkendall effect induced ultrafine VOOH nanoparticles and their transformation into VO2(M) for energy-efficient smart windows	43
High-coercivity hexaferrite ceramics featuring sub-terahertz ferromagnetic resonance	43
A reflection on ‘Highly dispersible polypyrrole nanospheres for advanced nanocomposite ultrafiltration membranes’	43
Order–disorder engineering of RuO2nanosheets towards pH-universal oxygen evolution	42
A high-performance organic lithium salt-doped OFET with the optical radical effect for photoelectric pulse synaptic simulation and neuromorphic memory learning	42
Ligand-orchestrated transition metal aerogels: a tailored sulfur coordination strategy for superior oxygen evolution catalysis	42
Realizing long-term cycling stability of O3-type layered oxide cathodes for sodium-ion batteries	42
Nanocomposite conductive hydrogels with Robust elasticity and multifunctional responsiveness for flexible sensing and wound monitoring	42
Ultramicroporous crosslinked polyxanthene-poly(biphenyl piperidinium)-based anion exchange membranes for water electrolyzers operating under highly alkaline conditions	42
Rapid 3D printing of unlayered, tough epoxy–alcohol resins with late gel points via dual-color curing technology	42
Introducing high-valence molybdenum to stimulate lattice oxygen in a NiCo LDH cathode for chloride ion batteries	42
Recent progress in electrochromic energy storage materials and devices: a minireview	41
Robust and stable dual-band electrochromic smart window with multicolor tunability	41
Strong and anti-swelling nanofibrous hydrogel composites inspired by biological tissue for amphibious motion sensors	41
Hybridization state transition-driven carbon quantum dot (CQD)-based resistive switches for bionic synapses	41
Near-infrared polarization-sensitive photodetectionviainterfacial symmetry engineering of an Si/MAPbI3heterostructural single crystal	41
Boosting the output performance of triboelectric nanogenerators via surface engineering and structure designing	41
Back cover	40
Defect-suppressed submillimeter-scale WS2 single crystals with high photoluminescence quantum yields by alternate-growth-etching CVD	40
Contents list	40
Inside front cover	40
Clay–polymer hybrid hydrogels in the vanguard of technological innovations for bioremediation, metal biorecovery, and diverse applications	40
Inside back cover	40
A wearable colorimetric sweat pH sensor-based smart textile for health state diagnosis	40
Defect-engineered 2D Bi2Se3-based broadband optoelectronic synapses with ultralow energy consumption for neuromorphic computing	40
Dual organic structure-directing agents in zeolite synthesis: cooperation or competition?	40
Non-equilibrium kinetics for improving ionic conductivity in garnet solid electrolyte	40
Inside front cover	40
Contents list	40
Front cover	40
Electrothermally powered synergistic fluorescence-colour/3D-shape changeable polymer gel systems for rewritable and programmable information display	40
A synergistically designed strain-insensitive conductive hydrogel with humidity-adaptivity supporting sustained functional durability	40
Skin-adhesive and self-healing diagnostic wound dressings for diabetic wound healing recording and electrophysiological signal monitoring	40
Inside back cover	39
Efficient solution-processed fluorescent OLEDs realized by removing charge trapping emission loss of BODIPY fluorochrome	39
Introduction to the Light-nanoMatter Interactions themed collection	39
Unraveling the myths and mysteries of photon avalanching nanoparticles	39
A silk fibroin-based hydrogel desensitizer achieving 660 μm dentin tubule occlusion for dentin hypersensitivity treatment	39
Contents list	39
Front cover	39
Multiple active site additive-mediated suppression of Sn2+ oxidation and regulation of crystallization for high-performance Sn–Pb mixed perovskite solar cells	39
Introduction to the soft wearable sensors themed collection	39
Chemiresistive NH3 detection at sub-zero temperatures by polypyrrole- loaded Sn1−xSbxO2 nanocubes	38
A robust strategy for thermoformable cellulosic composite bioplastics via hydrogen bond substitution	38
Materials Horizons Emerging Investigator Series: Professor Milad Kamkar, Multiscale Materials Design Center, University of Waterloo, Canada	38
Revealing the full potential of CsPbIBr2 perovskite solar cells: advancements towards enhanced performance	38
Accelerated discovery of ultraincompressible, superhard materials via physics-enhanced active learning	38
Microscopic strain mapping in polymers equipped with non-covalent mechanochromic motifs	38
Achieving exceptional energy storage performance in PbHfO3 antiferroelectric ceramics through defect engineering design	38
Living dynamic polymeric materials	38
A deep learning model for inferring the reverse intersystem crossing rate of TADF organic light-emitting diodes, overcoming the uncertainty of recombination dynamics	37
Engineering the nano-bio interface: challenges and opportunities for predicting the surface properties of monolayer-protected nanoparticles	37
Recent advances in interface engineering in aluminum matrix composites reinforced by nano-ceramic phases: from atomic structure to mechanical performance	37
Structural amine-induced interfacial electrical double layers for efficient photocatalytic H2 evolution	37
Electron conductive self-assembled hybrid low-molecular weight glycolipid-nanosilver gels	37
Emerging horizons in polymer applications	37
Bioactive polymer-enabled conformal neural interface and its application strategies	37
Ferroelectric, flexoelectric and photothermal coupling in PVDF-based composites for flexible photoelectric sensors	37
Lamination methods for the fabrication of perovskite and organic photovoltaics	36
Development of self-cooperative nanochaperones with enhanced activity to facilitate protein refolding	36
Strontium-deficient SrxCoO2–CoO2 nanotubes as a high ampacity and high conductivity material	36
Switchable smart porous surface for controllable liquid transportation	36
Slippery hydrogel surface on PTFE hollow fiber membranes for sustainable emulsion separation	36
Geometry engineering of a multiple resonance core via a phenyl-embedded strategy toward highly efficient narrowband blue OLEDs	36
Interactive deformable electroluminescent devices enabled by an adaptable hydrogel system with optical/photothermal/mechanical tunability	35
Continuous flow synthesis of metal nanowires: protocols, engineering aspects of scale-up and applications	35
Leveraging bound states in the continuum for advanced ultra-sensitive sensing technologies	35
Graphene-based polymer composites in thermal management: materials, structures and applications	35
Crosslinking-induced anion transport control for enhancing linearity in organic synaptic devices	35
Non-radiative recombination energy losses in Y-series asymmetric acceptor-based organic solar cells	35
Constructing a biomimetic TiOF2@PCN-222-Fe Z-scheme heterojunction using self-assembled L-cysteine for CO2 visible light photoreduction	35
Customized surface adhesive and wettability properties of conformal electronic devices	35
Multi-compartment supracapsules made from nano-containers towards programmable release	35
Supramolecular temperature responsive assembly of polydopamine reduced graphene oxide	35
Self-association and gel formation during sedimentation of like-charged colloids	35
In situ self-reconstructed hierarchical bimetallic oxyhydroxide nanosheets of metallic sulfides for high-efficiency electrochemical water splitting	35
Charge–orbital synergistic engineering of TM@Ti3C2O1−xBx for highly selective CO2 electrochemical reduction	34
Leveraging volatile memristors in neuromorphic computing: from materials to system implementation	34
A ladder-type organic molecule with pseudocapacitive properties enabling superior electrochemical desalination	34
Hybrid suture coating for dual-staged control over antibacterial actions to match well wound healing progression	34
Engineering a hollow bowl-like porous carbon-confined Ru–MgO hetero-structured nanopair as a high-performance catalyst for ammonia borane hydrolysis	34
High-toughness, extensile and self-healing PDMS elastomers constructed by decuple hydrogen bonding	33