Materials Chemistry Frontiers

Papers
(The TQCC of Materials Chemistry Frontiers is 14. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
Molecular structure effects on the mechanisms of corrosion protection of model epoxy coatings on metals198
Design and preparation of glassy molecular precursors by adjusting molecular structures for facile processing of high-performance polymers166
Solvent-free isomerization of trialkoxy-heptazine derivatives featuring efficient intermolecular rearrangements134
Contents list118
Back cover114
Tuning the exchange-coupling effect in raspberry-like γ-Fe2O3@CoO nanoparticles engineered through the single variation of the surfactant concentration in the synthesis process109
C4N quantum dots/g-C3N4 nanosheets organic homogeneous structure self-assembly for efficient charge separation and photocatalytic hydrogen evolution104
Back cover102
Back cover100
Contents list94
Contents list84
Back cover82
Back cover80
B-site cation sequencing in SrMnO3 using iron for zinc–air battery electrocatalysis: a structural evaluation79
Anin situ-fabricated p-Co3O4@n-ZnO surface heterojunction photocatalyst for solar-to-fuel conversion of CO276
FeNi3 nanoparticles for electrocatalytic synthesis of urea from carbon dioxide and nitrate74
Emergence of Ruddlesden–Popper phases and other pitfalls for moderate temperature solution deposited chalcogenide perovskites72
Bifunctional NiFe LDH as a piezoelectric nanogenerator and asymmetric pseudo-supercapacitor71
Multicolor 3D afterglow structures with high precision and ultralong lifetimes based on carbazole-doped photocurable resins70
Colloidal fluorine-doped ZnO quantum dots: the synergistic action of atomic doping and growth conditions directs fluorescence and photoactivity70
A tris-tetrazole based nanostructured soft material: studies on self-healing, AIEE, and rheological and fluorometric detection of 3-aminopyridine68
Influence of the pendant substituent at the C1 position of a spirobifluorene scaffold on the electronic properties67
In situ construction of vertically aligned AlN skeletons for enhancing the thermal conductivity of stearic acid-based phase-change composites65
Design of planar-zigzag semiconducting polymers to control chain orientation and electronic structure for organic photovoltaics65
Temperature-induced helix inversion in naphthyl-based cholesteric liquid crystals64
The role of single copper atoms in enhancing the photocatalytic activity of carbon nitride for selective oxidation63
Recent advances in trifunctional electrocatalysts for Zn–air batteries and water splitting62
Violet light excitable organic halides with short ∼ns emissions for multiple optoelectronic applications60
Contents list60
An in situ synthesized manganese ferrite@4-hydroxy mandelic acid composite for removal of lead ions and Congo red59
Iridium-based electrocatalysts for the acidic oxygen evolution reaction: engineering strategies to enhance the activity and stability58
Deep-red/NIR AIEgens based on electron-withdrawing dithiafulvalene-fused benzothiadiazole for solution-processed non-doped OLEDs56
Boosting the catalytic performance of metalloporphyrin-based covalent organic frameworks via coordination engineering for CO2 and O2 reduction56
Advances and challenges in symmetrical solid oxide electrolysis cells: materials development and resource utilization55
Isolation strategy for a novel luminescent Eu3+-pyridine-2,6-dicarboxylic acid complex with high compatibility and stability for light-conversion agricultural films55
An assembled ternary photocatalyst CoPh/CdSe@TiO2 for simultaneous photocatalytic CO2and proton reduction55
Dimension-dependent intrinsic point defect characteristics of binary photovoltaic materials54
Coordinated water molecule-induced solid-state superprotonic conduction by a highly scalable and pH-stable coordination polymer (CP)52
Recent advances in MXenes: a promising 2D material for photocatalysis51
Advances and strategies of electrolyte regulation in Zn-ion batteries51
Rare earth-based MOFs for photo/electrocatalysis50
Non-precious metal-based catalysts for water electrolysis to produce H2 under industrial conditions50
Direct styrene hydrogenation on a metal-free boron–nitrogen doped carbon catalyst50
Advances in polymer electrolytes for solid-state zinc–air batteries50
Contents list49
Back cover49
Contents list49
New heater@luminescent thermometer nano-objects: Prussian blue core@silica shell loaded with a β-diketonate Tb3+/Eu3+ complex48
Performance enhancement by additional donors in D–A–D′ type thermally activated delayed fluorescence materials48
Laser-induced fluorine-containing coating on zinc anode surface for regulated Zn(002) deposition47
Cobalt–platinum intermetallic composite loaded on pyridinic N-enriched carbon for acidic hydrogen evolution catalysis with ultralow overpotential47
Influence of CeO2 support morphology on the structural and NO2RR performance of CeO2@Au catalyst47
Structure–property relationship on insertion of fluorine- versus nitrogen substituents in wide bandgap polymer donors for non-fullerene solar cells: an interesting case study46
Control of near-infrared dye fluorescence lifetime in all-polymer microcavities45
A post-synthetically modified porous organic polymer for photocatalytic water purification45
Contents list44
Back cover44
Multifunctional nanomicelles constructedviaan aggregation and de-aggregation strategy for magnetic resonance/NIR II fluorescence imaging-guided type I photodynamic therapy43
Single atom embedded ZnO monolayers as bifunctional electrocatalysts for the ORR/OER: a machine learning-assisted DFT study43
Correction: Interfacial engineering between SnO2/MAPbI3 by maleate pheniramine halides toward carbon counter electrode-based perovskite solar cells with 16.21% efficiency43
Back cover42
Front cover42
Contents list41
Front cover40
Steering the luminescence of donor–acceptor materials by regioisomerism of triazole linkers40
Back cover40
Liquid-crystalline perylene bisimide derivatives bearing an azacrown ether ring complexing with alkaline metal ions40
New aggregation-induced delayed fluorescent materials for efficient OLEDs with high stabilities of emission color and efficiency39
Contents list39
Molecular engineering of organic small-molecule photothermal agents by changing the donor group for photothermal therapy and photoacoustic imaging of tumors39
A modifiable double donor based on bis(N-ethyl-N-hydroxyethyl)aniline for organic optical nonlinear chromophores39
Front cover39
Dual-mode regulation of microbial cell membrane permeability for an enhanced microbial cuproptosis-like death pathway38
All-weather-available electrothermal and solar–thermal wood-derived porous carbon-based steam generators for highly efficient water purification38
Thermally crosslinkable second-order nonlinear optical polymer networks: high stability, good transparency, and large second-order nonlinear optical effects38
Large-pore mesoporous silica: template design, thin film preparation and biomolecule infiltration38
Humidity-tolerant selective sensing of hydrogen and n -butanol using ZIF-8 coated CuO:Al film38
Fabrication strategies for high quality halide perovskite films in solar cells38
Energetic bi-diazole ‘transformers’ toward high-energy thermostable energetic compounds38
Structure-performance interplay of rhodium-based catalysts for syngas conversion to ethanol37
Isomeric effect of naphthyl spacers on structures and properties of isostructural porous crystalline frameworks36
Recent progress in heteroatom doping to modulate the coordination environment of M–N–C catalysts for the oxygen reduction reaction36
Conjugated D–π–A photovoltaic polymers containing thieno[3,2-b]thiophene π-bridge36
Self-supporting Fe7S8 microsphere/N-doped carbonized silk textile for high-performance sodium-ion batteries36
Transition metal ion-doped cesium lead halide perovskite nanocrystals: doping strategies and luminescence design36
Rational design and application of electrocatalysts based on transition metal selenides for water splitting36
Optimizing strong metal–support interaction on cobalt phosphide-supported Ru single atom catalyst for highly-efficient hydrogen evolution reaction36
Nano-based theranostic approaches for infection control: current status and perspectives36
Self-assembled molecules as selective contacts for efficient and stable perovskite solar cells36
Celebrating the 10th anniversary of ShanghaiTech University35
Functional conductive hydrogels: from performance to flexible sensor applications35
Competitive coordination and Lewis-base interactions of amines in supertetrahedral cluster-based materials by a controllable naked T3-InS precursor method: from isolated clusters with various substitu35
MXene composite with Ni/Co sulfide for enhanced hydrogen evolution reaction35
A flexible, rapid response, hybrid inorganic–organic SnSe2–PEDOT:PSS bulk heterojunction based high-performance broadband photodetector35
Intercluster charge ordering in monoclinic and triclinic Ba–Mo-based hollandite phases34
Front cover34
Conductive hydrogels as an “innovative healer” for the treatment of diabetic wounds34
Developing piezochromic luminescent materials via regioselective cyanation of naphthalimide–cyanostilbene derivatives34
Contents list34
Contents list34
“Delocalized π-bond” guided pyramidal nanocrystal superstructures for excellent light trapping in SERS33
Tuning the charge stabilization and transport in naphthalimide-based semiconductors via a fused-ring and core-engineering strategy33
Restricting intramolecular motion converts non-fluorescent semicroconaine dyes into turn-on aggregation-induced emission probes33
Anti-freezing multifunctional conductive hydrogels: from structure design to flexible electronic devices32
Multifaceted luminescence in lanthanide-activated microrods for advanced multicolor anti-counterfeiting32
Coordination environment engineering of single-atom catalysts for the oxygen reduction reaction32
Experimental and theoretical investigation on the ORR activity of AgVO332
Acetylene bridged alkoxyphenanthrene and triarylamine-based triads for low threshold voltage with high mobility OFETs32
Blue emitters with various electron-donors attached to the 9-phenyl-9-phosphafluorene oxide (PhFIOP) moiety and their thermally activated delayed fluorescence (TADF) behavior31
Achieving the highest density and energy within diazo-oxide compounds31
Front cover31
Fully π-conjugated, diyne-linked covalent organic frameworks formed via alkyne–alkyne cross-coupling reaction31
Accelerating the development of electrocatalysts for electrochemical nitrogen fixation through theoretical and computational approaches31
Development of polymeric aptamer probes for in vivo continuous precision cancer targeting31
Recent advances in two-dimensional MXenes for zinc-ion batteries31
Facile fabrication of carbon microtube arrays from waste wood for use as self-supporting supercapacitor electrodes31
The progress of in situ technology for lithium metal batteries31
Efficient separation of xylene isomers by nonporous adaptive crystals of hybrid[3]arene in both vapor and liquid phases30
Recent advances in regulating the excited states of conjugated thermally activated delayed fluorescence polymers for high-efficiency OLEDs30
Rise of wood-based catalytic electrodes for large-scale hydrogen production30
Back cover30
Binder-free 3D SnO2-based nanocomposite anode with high areal capacity for advanced sodium-ion batteries30
Back cover30
Synthesis of small-sized intermetallic PtCo fuel cell catalysts by promoting inner surface utilization of carbon supports30
Back cover30
Gold(i) N-heterocyclic carbene complexes with tunable electronic properties for sensitive colorimetric detection of glutathione29
Spiro-configured dibenzosuberene compounds as deep-blue emitters for organic light-emitting diodes with a CIEy of 0.0429
A perylene diimide-based fluorescent probe for the selective detection of hypochlorite in living cells29
Bridging the inter-grain charge transportviaorganic semiconductors for high-performance thickness-insensitive perovskite solar cells29
Releasing trapped excitons in 2D perovskites via pressure annealing: a cooperative interplay between lattice strain and the electronic structure29
Rational design and progress of molybdenum-oxo clusters29
Front cover29
Recent advances in aggregation-induced emission (AIE)-based chemosensors for the detection of organic small molecules28
The novel dual-category active sites of NiCoP/CoP as high-performance electrocatalyst for urea electrolysis and synergistic hydrogen production28
Constructing strategies for hierarchically porous MOFs with different pore sizes and applications in adsorption and catalysis28
Highly effective DPA-SCP sonosensitizers for biofilm removal in infected root canals via sonodynamic therapy28
Red-light controlled supramolecular assemblies of N , N ′-diarylindigo amphiphiles for soft robotic actuat28
3D printed cellulose based product applications28
Application of MOF-derived materials as electrocatalysts for CO2 conversion28
Polymer-based electrolytes for solid-state lithium batteries with a wide operating temperature range28
Harnessing solar energy with NH4Cl-doped hole transport layers in inverted perovskite solar cells27
Front cover27
Contents list27
Tetrazine-derived chromones as conditionally activated solvatochromic fluorescent probes for dual imaging of lipid droplets and mitochondria27
Front cover27
Contents list27
Back cover27
Boosting the overall stability of organic solar cells by crosslinking vinyl-functionalized polymer derived from PM626
Front cover26
Color-tunable, high-dissymmetry circularly polarized phosphorescence in chiral nematic phases: self-assembly, energy transfer, and handedness inversion26
Preparation of organic compound/g-C3N4 composites and their applications in photocatalysis26
Synthesis of a new chlorin photosensitizer for photodynamic therapy against colon cancer26
D–A-Type fluorophores with efficient dual-state emission for imaging at ultralow concentration26
Revisiting the anti-heavy-atom effect: absence of halogen-based bonding and lack of enhanced aggregation-induced emission in bromine-substituted tetraphenylethylene derivatives26
A stable pyridone-based hydrogen-bonded organic framework for electrochemical detection of dopamine26
Recent advances in functional electronic devices enabled by two-dimensional covalent organic framework films26
NIR-II light-response porphyrin-heptazine-based conjugated organic polymers for highly efficient photooxidation26
Perovskite-inspired low-dimensional hybrid azetidinium bismuth halides: [(CH2)3NH2]3Bi2X9 (X = I, Br, Cl)26
Stable two-dimensional lead iodide hybrid materials for light detection and broadband photoluminescence26
A structurally engineered flower shaped magnetic hierarchical sorbent for rapid and selective uptake of Pb2+ ions from water samples26
Machine learning-driven breakthroughs in water electrolysis and supercapacitors26
Atomically dispersed Fe/Co–N–C and their composites for proton exchange membrane fuel cells26
On-surface gold-catalyzed hydroamination/cyclization reaction of alkynes26
In situ etching strategy to construct yolk–shell CoSe2@NiCoSe4-NC heterostructures for high-performance sodium ion battery26
Contents list25
A novel photoswitchable AIE-active supramolecular photosensitizer with synergistic enhancement of ROS-generation ability constructed by a two-step sequential FRET process25
Back cover25
Inside front cover25
Lessons learned: how to report XPS data incorrectly about lead-halide perovskites25
Removal of nitrogenous heterocycles by a CoMoS3/NH2-MIL-53(Fe)-catalyzed photo-Fenton-like process: effect, mechanism and toxicity evaluation25
Recent advances in the design, synthesis and catalytic applications of triazine-based covalent organic polymers25
Construction of a NiFe-LDH catalyst with a three-dimensional unified gas diffusion layer structure via a facile acid etching route for the oxygen evolution reaction25
Phosphate-based polyanionic insertion materials for oxygen electrocatalysis25
Sub-nanometric materials for hydrogen evolution reaction25
Novel self-assembling cyclic peptides with reversible supramolecular nanostructures24
Flexible TADF-based organic X-ray scintillating films for high-resolution imaging24
Current material design strategies on the copper chalcogenide cathodes for rechargeable magnesium batteries: a review24
Naphthalenediimide-carbonylpyridiniums: stable six electron acceptors for organic cathodes24
Contributors to the Materials Chemistry Frontiers Emerging Investigator Series 202424
Constructing vertically aligned ZIF-67 microrod arrays on carbon cloth with commercial-level mass-loading for high-performance supercapacitors24
Salt-inclusion sulfides [K4Cl][MII11In9S26] (MII = Zn, Cd) displaying robust nonlinear optical activity24
Back cover24
Oxygen vacancy-mediated Bi–CuOx heterostructure for enhanced electrochemical nitrate-to-ammonia production and Zn–nitrate battery behavior24
Front cover24
Laser irradiation-induced two-photon photolysis of sulfates for photoluminescent sulfur quantum dots24
Front cover24
Highly stable electrofluorochromic switching of aggregation-induced emission-active conjugated polymers24
Conformation-determined emission enhancement of phenothiazine derivatives under high pressure24
Trends and perspectives in bio- and eco-friendly sustainable nanomaterial delivery systems through biological barriers23
A N-Rich porous carbon nanocube anchored with Co/Fe dual atoms: an efficient bifunctional catalytic host for Li–S batteries23
Zero-dimensional indium hybrids and modulated photoluminescence by Sb doping23
Inside front cover23
Surface engineering in CsPbX3 quantum dots: from materials to solar cells23
Theoretical insights into the rational design of small organic phototheranostic agents for promoting image-guided cancer surgery23
ADA′DA small molecule acceptors with non-fully-fused core units23
Outstanding Reviewers for Materials Chemistry Frontiers in 202423
Recent developments in transition metal-based MOFs for electrocatalytic water splitting emphasizing fundamental and structural aspects23
Narrowband emission: organic thermally-activated delayed fluorescence materials and underlying mechanisms23
Sustainable bio-based active packaging films: enhancing chitosan with gallic acid-loaded nanoparticles23
Metal porphyrins and metal phthalocyanines as designable molecular model electrocatalysts23
Upconversion and multiexciton generation in organic Mn(ii) complex boost the quantum yield to > 100%23
Exciplex-induced TADF, persistent RTP and ML in a host–guest doping system22
Back cover22
Back cover22
The mechanism of ligand-induced chiral transmission through a top-down selective domain etching process22
Defects and stability of perovskite solar cells: a critical analysis22
Contents list22
Front cover22
Fullerene-derived nanocomposite as an efficient electrocatalyst for overall water splitting and Zn–air battery22
Metal–organic framework-based SERS sensing platforms for life and health detection22
Back cover22
Porous yet densely packed metal–organic frameworks (MOFs) toward ultrastable oxygen evolution at practical current densities21
Front cover21
Encapsulating nickel sulfide nanoparticles within porous carbon nanocages for sodium-ion batteries21
Gold nanoparticle-based lateral flow immunoassay for the rapid detection of flutriafol residues in food21
Polyelectrolyte photopolymer complexes for flame retardant wood21
Progress of polyethersulfone composites and their applications in biomedical engineering21
Back cover21
Back cover21
Contents list21
Toward efficient electrocatalytic oxygen evolution with a low concentration baking soda activated IrOxsurface in a hydrothermal medium21
Scope and significance of transition metal oxide nanomaterials for next-generation Li-ion batteries21
Back cover21
Contents list21
Front cover21
Low humidity dependence of proton conductivity in modified zirconium(iv)-hydroxy ethylidene diphosphonates21
Polyoxometalate-derived bimetallic catalysts for the nitrogen reduction reaction21
Single atom Fe-based catalyst derived from hierarchical (Fe,N)-ZIF-8/CNFs for high-efficient ORR activity21
Boosting charge transfer in Au-decorated B/K co-doped CN nanosheets towards enhanced photocatalytic CO2 reduction20
Diblock copolymer micelles with patches in polyhedral configurations mimicking atomic valence structures20
Accelerating corrosion of iron foam enables a bifunctional catalyst for overall water splitting20
Recent progress in bimetallic carbide-based electrocatalysts for water splitting20
Particle-size-dependent biological distribution of gold nanoparticles after interstitial injection20
Simultaneous one-step regulation of planarization and donor rotation to enhance multi-modal imaging guided therapy20
Novel class of organic crystal scintillators based on aggregation-induced emission20
Basics of the scanning electrochemical microscope and its application in the characterization of lithium-ion batteries: a brief review20
Recent progress in borate-based short-wavelength nonlinear optical crystals with boron–oxygen skeleton modification20
The critical role of inter-component hydrogen bonds in the formation of reversibly interlocked polymer networks20
Recent advances in key components of proton exchange membrane water electrolysers20
Electrospun dual-aeolotropic conductive exceptive Janus membrane and Janus tubule functionalized by up-/down-converting fluorescence and magnetism20
A synergetic model for implementing single-component white-light emission: a case study of zero-dimensional cadmium halides20
Photo induced force microscopy: chemical spectroscopy beyond the diffraction limit20
Acceptor–donor–acceptor based thermally activated delayed fluorescent materials: structure–property insights and electroluminescence performances20
Rational design of amphiphilic BODIPY-based photosensitizers for multimodal imaging-guided phototherapy20
What determines the iodine oxidation reaction kinetics in halide perovskite solar cells?20
Highly emissive and color-tunable copper-based halide composites for bright white light-emitting diodes20
Contents list20
Photoinduced electron transfer endows fluorogenicity in tetrazine-based near-infrared labels20
Correlation between the horizontal transition dipole moment and luminescence properties of dopants in organic light-emitting diodes20
Inside front cover19
0.46372604370117