Protection of Metals and Physical Chemistry of Surfaces

Papers
(The median citation count of Protection of Metals and Physical Chemistry of Surfaces is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Extraction of Copper Ions with Composite Sorbents Based on Chitosan from Aqueous Solutions of Electrolytes in the Presence of a Surfactant24
Physicochemical Features of Biocorrosion of Copper and Products Based on It by Microfungi24
Anodic Dissolution of Iron in the Solutions Simulating the Composition of Corrosive Exometabolites of Organotrophic Bacteria23
IR-Spectroscopic Investigations of Adsorbed Water and Structural Changes in Hydrophobic and Hydrophilic Microfiltration Membranes16
Dynamics of Changes in the Rate and Mechanism of Destruction of a Composite Material Based on Carbon and Ceramics15
Chromate-Free Conversion Coatings Based on Aluminum Alloy 110514
Relaxation Behavior of Latex Acrylate Polymers. 1. The Effect of Polymerization Factors. 1.1. Statistical Polymer13
Sorption of Water by Aromatic Polyamides12
Fabrication of Smart pH-Responsive Nanocontainers for Corrosion Protection of Mild Steel11
Mechanical Properties and Corrosion Behavior of Stir Casted Composites of ZA-27 Alloy Reinforced with Al2O3 Nanoparticles10
Preparation of Photoactive TiO2/LTA Zeolite Composites by Solution Technology in Hydrothermal Conditions9
Ocimum Basilicum Seeds as a New Natural Corrosion Inhibitor for AA7075-T6 Aluminum Alloy in Nacl Solution: Electrochemical, Thermodynamic, Surface, and Theoretical Studies9
The Effect of Sodium Additives on the Anodic Behavior of AlTi0.1 Aluminum Conductor Alloy in a Medium of NaCl Electrolyte9
Modelling of the Boronizing Kinetics of Vanadis 6 Steel by the Integral Diffusion Model9
The Rubus fruticosus Leaf Extract as an Eco-Friendly Copper Corrosion Inhibitor9
The Structure, Thermal Stability, Heat Resistance, and Diffusion-Barrier Properties of Coatings in the Mo–Y–Si–B System9
Adsorption of Xenon and Krypton onto Microporous Carbon Adsorbents from a Depleted Gas–Air Mixture8
Wollastonite-Containing Composite Material from Rice Straw8
Thermal Effects in Mixtures of Boronic Acid with Aluminum after Plastic Deformation under High Pressure8
Nanoscale Catalysts Based on Metal Chalcogenide Cobalt Clusters for Reduction of Oxygen in Alkaline Media8
Features of the Anode Behavior of a Combined Titanium–Aluminum Electrode and the Physicochemical Properties of the Products of Its Dissolution8
Structure and Properties of Ti–C–Ni–Al Wear-Resistant Coatings Obtained by HIPIMS Method7
Investigation of Wear Behaviors of Nanodiamond Particles Added Chromium Coating on Porous Powder Metallurgy Specimens7
The Effect of Electropolymerization Conditions on the Physicochemical and Biological Properties of Polypyrrole-Modified Activated Carbon7
Study of MgO-Incorporated Acrylic Emulsion-Based Coating for Antimicrobial Application7
Surface Modification of Lanthanum Fluoride Nanoparticles with 4-(2-Pyridylazo)resorcinol6
Change in the Filling of Surface States of Aluminum with Electrons during Its Dispersion6
Adsorption of Ethane (С2Н6) onto a La–BTC Microporous Metal–Organic Framework Structure at High Pressures6
Some Thermodynamic and Kinetic Properties of the HCl–H3PO4–H2O–Fe(III) System6
Increasing Corrosion Resistance of Passivating Metals by Electrochemical Application of Local Nanosized Coatings6
A Comparative Study on the Shape Evolution of the TiC Particles in Ti–C, Ti–Al–C, and Ti–Si–C Systems after HF Treatment6
Hydrophobic Coatings on Aluminum Substrate Based on Different Metal Oxides: Co3O4, ZnO, and MgO6
Physicochemical Studies of Material Obtained by Pressing and Sintering Al Powder Modified with V2O56
Corrosion of Centrifuged Hot Dip Galvanized Pad Hooks Used in GFRC Panels6
Failure Analysis of Second Row-Nozzles Based on FSX-414 Cobalt Alloy in a Gas Turbine Unit5
Electrochemical Coating of PANI/Nanometal Oxide Composites on 304 L Stainless Steel Surface and Investigation of Corrosion Behavior5
The Effect of a Metal Surface on the Elasticity of Polymer Films5
Activation of Anodic Dissolution of the Mn5Si3 Electrode by Fluoride Ions in a Sulfuric Acid Solution5
Preparation and Research of Chromium Coatings with Diamond Nanoparticles Deposited Directly on a Monolithic Composite of Niobium and Aluminum5
Evaluation of the Long-Term Corrosion Resistance of Structural Metals and Mapping the Continental Territory of the Russian Federation in Different Periods5
Anticorrosion Performance of TiO2/Epoxy Films with Doped Polyaniline and Poly(o-ethoxyaniline) Applied to Carbon Steel in 3.5 wt % NaCl Acid Solution5
Evaluation of the Ability of ANFIS and SVMR Models to Predict the Corrosion Inhibition of Cerium Conversion Coating4
Evaluation of Corrosion Inhibition and Adsorption Effect of Aqueous Chrysophyllum Albidum Leaves and Peels Extract on Mild Steel in Acidic Medium4
Electrochemical Deposition of Composite Nickel–Graphene Oxide Coatings in the Reverse Mode4
Corrosion Behaviour of Boronized Ductile irons in Formic and Nitric Acid Solutions4
The Study of Practical Adhesion of a Layer/Substrate System on an AISI 8620 Steel Exposed to Boriding and Borocarburizing4
On the Mechanism of the Growth of Electronic Conductivity upon Reduction in the Excessive Deformation Volume of a Diluted Palladium–Hydrogen System4
Synergistic Effect of Plant-Derived Compounds on Corrosion of cp-Ti in Artificial Oral Media: An Experimental and Theoretical DFT Approach4
Processing and Development of Corrosion Resistance Surface-Active Thin Film Nanocellulose Composite Coatings for Mild Steel Protection4
The Influence of Pulse Current Parameters on Microstructure, Morphology, and Corrosion Behaviour of the Electrodeposited Ni–Fe–TiO2 Composite Coating4
Niobium Carbide Coatings Grown on Cold Work Tool Steel AISI D3 by Thermomechanical Processing: Characterization, Wear and Corrosion Behaviors4
Effect of ZnNiAl-layered Double Hydroxide Morphology on Adsorption of Methyl Orange4
Natural Aluminosilicates Modified with Organosilicon Thiosemicarbazides for the Extraction of Nickel(II) Ions4
The 80th Birthday of Academician Aslan Yusupovich Tsivadze4
Molecular Distributions in a “Vapor–Liquid” Separating System Inside Cylindrical Pores at Three-Phase Boundaries4
Electrochemical Behavior of Steel Coated with Organosilicon Self-Organizing Layers4
Corrosion and Erosion Analysis of AlCrN/CrN Multilayered Coating Applied by Cathodic Arc Physical Vapor Deposition (PVD)4
The Effect of Chemical Modification of the Surface by Oxysilanes on Changes in the Structural and Phase States of Highly Porous Aluminum Oxyhydroxides at Annealing up to 1200°C4
Investigation of the Characteristics of a Graphene-Based Thermal Interface for Cooling Integrated Microcircuits4
Modification of the Surface of Glass with a Silatranyl–Dihydropyran Hybrid: An Approach to New Complex-Forming and Biofunctional Materials4
Adsorption–Catalytic Deformation in the Synthesis of Hydrogenation Catalysts4
Thermal Effects in Mixtures of Boric Acid with Some Polymers and Low-Molecular-Weight Inorganic Substances after Plastic Deformation under High Pressure4
The Influence of Chromium Carbide on Corrosion Resistance of Plasma NiCrBSi Coating3
Electrochemical Characterization and Corrosion Analysis of Cu–Ni Films Electrodeposited from Different pH Bath3
The Effect of Discharge Pulse Energy in Electrospark Deposition of Amorphous Coatings3
Thermal Oxidation of Nanosized Vanadium Diboride3
Accumulation of Vapors of Liquified Natural Gas in Porous Carbon Structures3
Equations of Two-Component Adsorption from a Liquid on a Solid Surface Taking into Account its Deformation and Electric Charge on the Solid Surface3
Electrochemical Studies of the State of a Nickel Surface in an Alkaline Medium3
Augmentation of Polyethylene Terephthalate Reusability as Efficient Corrosion Inhibitors in Oilfield Protection: Synthesis, Evaluation, and Antibacterial Study3
Study of the Adsorption Properties of Lanthanum-Doped Mesoporous Silica Gels, Modified with Nickel and Silver, by the Method of Gas Chromatography3
An Effective PtNi/CNTs Catalyst for the Hydrogen Oxidation Reaction in an Alkaline Electrolyte3
Changes in the Linear Dimensions and Physicomechanical Properties of Flat Palladium Samples during Electrochemical Hydrogen Uptake and Subsequent Application of Different Techniques for Desorption of 3
Elevated Temperature Wear Behavior of FeCr Slag Coating as an Alternative Coating Material for Caster Rolls3
Corrosion Inhibition and Adsorption Behavior of Musa Basjoo Siebold Leaves Extract on Mild Steel in H3PO4 Solution: Experimental and Theoretical Studies3
The Effects of Electrolyte Composition on Formation and Properties of Micro-Arc Oxidation Layer of 6082-T6 Al Alloy3
Concentration and Temperature Dependent Effects on Acoustical Parameters and Thermal Conductivity in Cobalt Oxide Nanofluids3
Adsorption of Methane Vapors on a Micro-Mesoporous Carbon Adsorbent During Long-Term Storage of Liquefied Natural Gas3
The Effect of Water-Soluble Tetrasulfophthalocyanine on Physicochemical Physicomechanical Properties of Polyacrylate Films and Films and Coatings of Different Elasticity3
The Influence of Imidazolium Ionic Liquids on the Chromatographic Behavior of Some Aromatic Acids under Reverse-Phase High-Performance Liquid Chromatography Conditions3
A Study of the Kinetics of Adsorption of Zinc(II) Ions by a Natural Aluminosilicate of Eastern Transbaikalia3
Synthesis and Sorption Properties of Lithium Aluminosilicate3
DSC and X-ray Diffraction Study of a Mixture of Aluminum with 50 wt % of Aluminum Oxide after Plastic Deformation under High Pressure3
Corrosion Resistance of Multistep Doped Graphene Oxide/Lanthanum-Based/Silane Composite Coatings on the Magnesium Alloys3
Application of the Random Forest Algorithm of Corrosion Losses of Aluminum for the First Year of Exposure in Various Regions of the World3
Synthesis and Robust Properties Evaluation of PPY-CuO Nanocomposite for Organic Light Emitting Diodes as Electron Transport Layer Material3
Effect of Chitosan Crosslinked with Citric Acid Coating on Kraft Paper for Food Packaging Applications2
Impact of Zirconium Oxide and Tantalum Carbide Powder Coatings by Plasma Spraying Techniques on Engine Performance2
Study of the Influence of Aluminum Content on the Radiation-Catalytic Activity of Aluminosilicate in the Process of Water Decomposition2
The Effect of a Metal-Substrate Surface on the Relaxation Behavior of Acrylic Coatings2
Application of Mosaic Cathodes Containing TiB (STIM-4) Segments for Deposition of Protective Coatings in the Ti–Al–Cr–B–N System by the Method of Closed Field Unbalanced Magnetron Sputtering2
Comprehensive Spectroscopic and Optoelectronic Properties of BBL Organic Semiconductor2
The Relaxation Behavior of Latex Acrylate Polymers. 2. The Interrelationship between Physicochemical and Physicomechanical Properties of Polymers2
A Study of the Comparison of the Effect of Water-Soluble Phthalocyanine on the Relaxation Properties of Latex Polymer in Films and Coatings2
The Role of the Mesh Size of Modified Mica in CO2–Cl– Environment Resistant Epoxy Coatings2
Sorption of Boric Acid by FIBAN Anion-Exchange Fibers2
Refined Microstructural Formation and Corrosion Behavior of Aluminium Nanocrystalline on Nickel-Phosphate Coatings Produced from Electrolytic Time Dependent Factor2
Comparison of System Constants of Thermostable Polysiloxane Stationary Liquid Phases of Different Origins2
The Surface Structure of “Monomeric” and “Polymeric” Reversed Stationary Phases and Mechanisms of Carotenoid Separation2
On the Extraction of Silver and Copper from Aqueous Solutions Using Hydrogenated Palladium2
Extraction of Copper Ions by Chitosan-Based Sorbents Modified with Nickel 2-Ethylimidazolate2
On the Use of Positron Flaw Detection in Monitoring the Atomic-Electronic and Defect Structure of Deformed Metal Mixtures2
Preparation and Structure of Chromium Coatings Doped with Diamond Nanoparticles Deposited Directly on a Monolithic Composite of Molybdenum and Aluminum2
Corrosion Properties of TiNi Medical Alloy with Bioinert Coatings2
Carbon Nanofiber Gas-Diffusion Anodes Based on a Copolymer of Acrylonitrile with Methyl Acrylate for High-Temperature Polymer-Electrolyte Membrane Fuel Cell2
Kinetic Modeling of Ultrafast Boriding of AISI 1045 Steel and Phase Homogenization2
Effect of Alloying Elements on the Microstructure and Corrosion Resistance of Zn–5Al–2Mg Alloy2
Solid-Phase Hydrogen Diffusion through a Fe92Si6B6 Amorphous Membrane and its Effect on the Mechanical Properties of a Non-Crystalline Environment2
Control of Metal–Oxide Coatings–Absorbers of Optical Radiation in Solar Power Plants. 1. Methodology2
Corrosion Performance of the Zn Coatings on AISI 1212 Mild Steel in 0.5 M NaCl Medium: Influence of Thicknesses of Metallic Film2
Effects of Al2O3 Particles on Corrosion Behavior and Microstructure of Al–Al2O3 Composites and Texture of Aluminum Matrix2
Improve the Corrosion Behavior of Galvanized Coating by Incorporation of ZrO2 Particles Using a Hot-Dip Method2
The Effect of Pulse Duration on the Structure and Mechanical, Tribotechnical, and Optical Characteristics of Zr–B–N Coatings Obtained by the PMS Method2
Corrosion and Wear Enhancement of Composite Layers over PEO-Coated Mg Alloys: A Review2
Energy Characteristics of Hydration of Synthetic Polyampholytes and Their Selectivity to Copper(II) and Nickel(II) Cations2
Effects of Different Zn/Mg Ratio and Ti Content on Hot Extruded 7xxx series Aluminum Alloy2
Electrochemical Assessment of Nano Ethyl Methacrylate-Methyl Acrylate Copolymer as Protective Coating for Copper Based Alloy in Sea Water2
5-Chloro-1,2,3-benzotriazole as a Chamber Corrosion Inhibitor for the MA8 Magnesium Alloy2
Synthesis and Testing of a Protective Layer on the Surface of a Lithium Electrode for a Lithium–Air Battery2
Synthesis and Examination of the ZrBDC Functionalized Metal–Organic Framework Structure for Carbon Dioxide Adsorption2
Effects of Rolling Deformation on the Microstructure and Properties of GNPs/2024Al Composite Materials2
Two-Stage Passivation of Zinc by Solutions of Sodium Dodecylphosphonate and Trialkoxysilanes2
Inhibition of Corrosion of Mg90 Alloy with Compositions Based on Sodium Oleate. Part I. Salts of Higher Alkenyl and Aryl Carboxylates2
Non-Gemini Dicationic Surfactants with Alkylthio Group as Corrosion Inhibitor for Mild Steel in HCl Solution2
The Study of the Sorption of Some Benzimidazoles on Hyper-Cross-Linked Polystyrene from Solutions Containing Imidazolium Ionic Liquids by RP HPLC2
Green Synthesis of N,N'-Bis(3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)-oxalamide: A Corrosion Inhibitor of Carbon Steel in Acidic Medium2
RETRACTED ARTICLE: Dynamic Mechanical and Electrochemical Analysis of Newly Synthesized Polyurethane/CuO–NiO Mixed Metal Oxide Nanocomposite Coated Steel in 3.5% NaCl solution2
Microstructure and Tribological Behavior of SiC and BN(h) Reinforced Electrodeposited Ni Matrix Composite Coatings2
Experimental and Theoretical Investigations of the Inhibition of the Corrosion of Mild Steel in HCl by Synthesized Piperazin Derivatives2
Some Thermodynamic and Kinetic Properties of the H2SO4–H3PO4–H2O–Fe(III) System2
Gas Chromatographic Study of a Carbon Adsorbent Based on a Liquid Crystal–Unsubstituted β-Cyclodextrin Bilayer2
The Formation of Metal–Oxide Heterostructures at Low-Temperature Oxidation of Alloys Based on the Fe–18Cr System2
Synthesis and Properties of Nanosized Germanium Particles Obtained in Acetone under the Influence of Laser Radiation2
Corrosiveness of the Atmosphere in Various Climatic Regions of the Russian Federation2
Catalysts for Oxygen Reduction on a Vulcan XC-72 Carbon Substrate Modified with Transition Metals2
Effect of Different V2O5 Salt Concentrations in Presence of Chloride and Sulfate Salt on Hot Corrosion Behavior of Functionally Graded Lanthanum Zirconate Thermal Barrier Coating2
Chloride Ion Effect on 316L SS Reinforcement in Fresh and Hardened Concrete: Electrochemical and Microscopic Analysis1
Chemical Sensor Array Modeling: The Case of Surface Acoustic Wave (SAW) Sensors1
The Problem of the Influence of the Nature of Metal on the Electrocatalytic Process and Its Solution Based on a Combination of the Vacancy Thermodynamic Model and Equilibrium Statistical Thermodynamic1
Investigation of Electrodeposited Mn–Co–Y2O3 Coating on Crofer 22 APU for the SOFC Interconnect Application1
Innovative and Sustainable Material TiO2-Pillared Clay Composite for Superior Adsorption-Photocatalyst Degradation of Methylene Blue1
Mechanical and Tribological Properties as a Function of Casting Process of Metal Matrix Nano Composite1
The Preparation of Photoactive TiO2/NaX Zeolite Composites under Hydrothermal Conditions with the Use of Solutions with a High Concentration of Titanium Polyhydroxo Complexes1
Features of Selective Laser Melting of Aluminum Powder Modified with Vanadium Pentoxide Gel1
Gas Permeability of Polymer/2D-Nanofiller Nanocomposites: Structural Interpretation and Nanoeffects1
Laws of Cresol-Vapor Sorption on Highly Porous Materials of Biomodified Flax Shive1
Sorption of Heavy Metal Ions by the “Cellulose–Carbon Nanotubes” Biocomposite1
Effect of Shot Blasting on the Boriding Kinetics of AISI 316L Stainless Steel1
Simulation Marine Corrosion in Tropical Vietnamese Waters1
Microscopic Description of Displacement-Type Ferroelectrics and Their Domain Structure in Terms of the Lattice Gas Model1
Investigating the Treatment of Transition Metals for Ameliorating the Ability of Boron Nitride for Gas Sensing & Removing: A Molecular Characterization by DFT Framework1
Features of the Chromatographic Efficiency of Adsorbents Based on Enantiomorphic Retgersite Crystals under Liquid-Chromatography Conditions1
Electrochemical Deposition and Properties of Nickel—Chromium–Graphene Oxide Composite Coatings1
Material Balance Equations and Their Solutions in Linear Adsorption Dynamics1
Mixed Inhibitors: Mutual Influence of Components1
Morphology and Particle Size Distribution of Sulfonated Сarbon Black1
Microstructure and Properties of Hydroxyapatite-Containing Ceramic Coatings on Magnesium Alloys by One-Step Micro-Arc Oxidation1
The Stress Effect of Adsorption Deformation Coal-Based Carbon Adsorbent During Methane Adsorption1
Physical Properties of NiFeS2 Thin Films Prepared by Spray Pyrolysis Method1
The Morphologies and Wetting Properties of CK40 and AA2024 Surfaces Produced by Chemical Etching and Stearic Acid Modification1
Molecular Machines in 3D and 2D Systems: Movement, Mechanical Work, and Switching. A Review1
The Influence of Benzotriazole on the Electrochemical Behavior of the AgCu50 Alloy in a Chloride Medium1
The Effect of a Tangential Electric Field on the Formation of the Chemical Composition and Defect Structure of Complex Oxide Layers on Fe–18Cr Alloy Surface1
Adsorption Deformation in Multicomponent Porous Systems1
Molecular Dynamics Simulation of the Interaction between Reduced Graphene Oxide and Sulfuric Acid1
Influences of La3+ Concentrations on Properties of Electroless Nickel–Phosphorus–Boron Coatings1
Formation and Decay of Cluster Particles under Ionization in High-Strength Fields1
Molecular Dynamics Simulation of the Effect of GO Structure on the Interaction between Alkaline Solution and Ag/GO/C Composite Electrode1
The Effect of Surface Mechanical Attrition Treatment Time on Microstructure and Mechanical Properties of AZ31 Mg Alloy1
Corrosion Behavior of Styrene Butadiene Rubber (SBR) with Copper Oxide Nanoparticles in NaCl 3.5% Solution1
Corrosion Behaviour of 17-4 PH Stainless Steels Produced by Adding Different Amounts of Alloying Element and Aged at Different Times1
Some Properties of Aluminum–Copper Mixtures after Plastic Deformation under High Pressures1
Structural, Compositional and Corrosion Characterization of Ni–W Thin Films1
Electrochemical Formation of “Al–Ni” Composite Coatings from Aluminum Suspension in an Electrolyte Based on a Deep Eutectic Solvent1
Conditions for Forming Porous Oxide Coatings Suppressing Corona Discharge during Transmission of Electricity through Power High-Voltage Wires1
Studying the Composition of Cluster Ions by Matrix- and Surface-Activated Laser Desorption/Ionization in Samples Obtained from Solutions of Sodium Stannate and Tin(II) Chloride1
The Influence of Plasma Electrolytic Oxidation Parameters on the Composition, Structure, and Surface Properties of Rare-Earth WE43 Magnesium Alloy1
Molecular Adsorption of Silane on Ge, Ga and Al-doped CNT Structures: A Density Functional Theory Study1
Preparation and Characterization of Nano TiO2–Hydroquinone-Doped Al Composites and Investigation of Theirs Wear Properties1
Preparation of PCLF/Si–Mg–FA Nanocomposite Coating on Ti-based Alloy: Synthesis, Corrosion behavior and Cytocompatibility1
A Comparison of Localized Corrosion Behavior of Hastelloy X and Stainless Steel 316 in Persian Gulf Costal Water1
Structural and Optical Properties of Chemical Bath Deposited Ferric Thin Films: Impact of Growth Time1
Pulse Electrodeposition and Properties of Nickel–Graphene Oxide Composite Coatings1
The Influence of the Size of Active Filler Particles (Ionite KU 2-8 in Nickel Form) on the Moisture Sensitivity of a Touch Film1
Synthesis and Characterization of New Schiff Base Derivatives from Quinazolinone Moiety and Studying Their Properties as Potential Corrosion Inhibitors1
Control of the Stability of Metal–Organic Framework Structures by the Method of Quartz-Crystal Microweighing on Quartz Resonators of Longitudinal Oscillations1
A Comparative Analysis of the Adsorption Properties and Porous Structure of an ASD-4 Powder Impregnated with Copper Formate in Different Concentrations1
Superhydrophobic Coatings Based on Montanic Acid1
Structural Сharacteristics, Mechanical Properties, Wear and Oxidation Resistance of Coatings in the Mo–Y–Zr–Si–B System Obtained on Molybdenum by Magnetron Sputtering in the DCMS and HIPIMS Modes1
Optimization of Laser Remelting Process for Copper Surface Quality1
Magnetic Properties of Fe + Ni-Containing TiO2-Layer/Ti Composites1
Spectral Ellipsometry of Metal–Oxide Nanocomposites in Planar Nonvolatile Memory Technologies1
Cavitation Properties of Various Liquids at the Interface with Electrochemically Hydrogenated Palladium1
Correlations between the Chitosan Solution Viscosity and the Anticorrosive Protection Efficiency of Indigo Carmine-impregnated Chitosan Coatings on Zinc1
Fabricating and Synthesizing Spin Coated CuO Thin Film as Absorber Layer in Optoelectronic Applications1
Adsorption–Structural Characteristics of Aluminum Powder Modified with Manganese Formiate1
Quartz Crystal Microbalance Study of Acetone Vapor Adsorption onto Microporous Carbon Adsorbent1
Adsorption of the Main Components of Air N2 and O2 on Cation-Exchange Forms of LSX Zeolite1
Physical Investigations on Mn3O4/ITO thin Film for Optoelectronic Applications1
Corrosion Inhibition Efficiency of Metal Complex of Carboxymethylchitosan in 3.5% NaCl1
Effective Tricationic Surfactants that Prevent Oxidation of Iron Atoms on the Metal Surface in Acidic Environment1
Effect of Sodium Citrate as Complexing Agent on the Electrodeposited CuZn Alloys: Electrochemical, Morphology, Structure, and Electrical Resistivity Studies1
Adsorption of Organosilanes on the Surface of Inorganic Materials: 2. Adsorption on the Surface of Metals1
Influence of Equal Channel Angular Extrusion and Heat Treatment on High Temperature Oxidation Resistance of Ti555 Alloy1
The Synthesis, Structure, and Optical Properties of Novel Rhodium(III) 12-Crown-4-porphyrinate in a Solution and a Polymer Film1
Fractal Analysis of Pure and Fe-Doped Manganese Oxide Supercapacitor Electrodes1
Electrophilic Substitution in Alkenes by the Example of Bromination of Vinylporphyrins1
Biocorrosion, Biofouling, and Advanced Methods of Controlling Them1
Theoretical Assessment of Inhibitive Behavior of Some Long Chain Fatty Acid Oxadiazoles1
The Influence of the Cadmium Complex of Nitrilo-Tris-Methylenephosphonic Acid and Electrochemical Behavior of Low-Carbon Steel in Neutral Aqueous Media Containing Chloride Ions1
A Mechanism of Desorption of Pertechnetate Ions from Macroporous Vinyl Pyridinium Anion-Exchange Resin Using Tributyl Phosphate1
Equilibrium and Kinetic Characteristics of Tryptophan Sorption onto FIBAN A-1 Fiber1
Structural Characterization and Protective Properties of Spray-Deposited Titania Coating Obtained from Oxime-Modified Titanium(IV) Precursor1
The Role of Primary Acts of Ion Reduction and Oxygen Effects Using Various Methods of Gold Nanoparticle Formation, Including Self-Assembly1
Theoretical Study to Evaluate Experimental Corrosion Inhibition of Ammonium Salt Derivatives for Mild Steel in Acidic Solution1
Super Activity of ACS Carbon Adsorbent in n-Butane Adsorption1
Crystallization Behavior of Electroless Ni–W–P–nSiO2 Amorphous/Nanocrystalline Coating1
Preparation of Organosilicon Modified Cationic Acrylic Resin and Its Application in Cathodic Electrodeposition Coatings1
The Influence of Size and Surface Hydrophobicity of Latex Polymer Particles on the Physical and Mechanical Properties of Films1
Development of Composition Modulated Multilayer (NiTi) Alloy Coatings for Improved Corrosion Protection of Mild Steel1
The Microstructural and Chemical Composition Changes in TGO and BC of HALT Pt–Al–APS YSZ Coating After Cyclic Oxidation1
Growth Kinetics of Boronized Layers and the Diffusion Zone in the Iron-Based A286 Superalloy with the Taylor Expansion Model1
An X-ray Photoelectron Study of the Surface of Carbon Fibers after Treatment in a Low-Temperature Octafluorocyclobutane Plasma1
On the Formation of Spectrally Selective Thermal Oxide Coatings on the Surface of Chromium Steel for Use in Solar-Energy Devices1
Adsorption of Carbon Dioxide onto Model Carbon Structures with Slitlike Micropores1
Inhibition Effect of 4-Amino-N-(1,3)–thiazole-2-yl Benzene Sulfonamide on Corrosion of Copper in Acidic Chlorur Solution1
A Differential Scanning Calorimetry Study of Phase Transitions in Ethyl cellulose/Bentonite Polymer Composites1
Hydrogen Production on Aluminum in Alkaline Media1
Investigation on Characterization of GGG 60 Coated with WC/Co by ESD Technique1
The Effect of Aluminum-Oxide Powders on the Structure and Properties of Copper Electrodeposited Composite Coatings1
Ultrathin Conversion Coatings on AMg3 Aluminum Alloy. Part 1. Optimization of the Coating-Fabrication Process0
Exchange and Nonexchange Interactions during the Sorption of Histidine on Clinoptilolite and Glauconite0
Complexes of Polyaniline with Sulfonated Polysulfone. Their Structure and Sensory Properties0
Adsorption Properties of Nanodiamond with a Hydrogenated Surface0
Boride Layers on Sverker 3 Steel: Kinetic Modeling, Experimental Characterization, and Validation0
Protection of Copper and Its MNZh 5-1 Alloy with Sodium Salts of Malonic and Ethylmalonic Acids in a Neutral Chloride Solution0
Lavandula angustifolia Extract as a Green Corrosion Inhibitor for Protection of Mild Steel in HCl Acid Solution0
Effect of Solution Treatment on Microstructure and Properties of Hybrid Reinforced 2124 Aluminum Matrix Composites by B4Cp/SiCp0
Features of the Corrosion Behavior of Metals in the Presence of Organosilicon Nanolayers on Their Surfaces0
The Role of Zirconium on the Microstructure and Electrochemical Corrosion in TZM Alloys0
Thermodynamics of Sorption of Organic Compounds by Sorbents Based on Supramolecular Liquid Crystal HPFAB and β-Cyclodextrin Derivatives under Gas Chromatography Conditions0
Adsorption of Highly Soluble Organic Compounds on Diatomite0
Adsorption of the IFKhAN-92 Inhibitor on Chromium–Nickel Steel from Mineral Acid Solutions0
Biocidal and Corrosion Properties of Composite Electrochemical Coatings Based on Tin–Nickel Alloy0
Electrodeposition of Nickel Coatings from Acetate-chloride Electrolyte using Galvanostatic Pulse Electrolysis0
Optical and Antimicrobial Activity of Nanostructured Mn(II) and Cu(II) Macrocyclic Complexes Derived from Aspartic Acid0
Morphology of Phthalocyanine Nanostructures Localized in the Structure of a Latex Polymer0
Temperature Dependence of the Luminescence Spectra of Copper(II) Mesoporphyrinate in a Polystyrene Film and on the Surface of Microparticles of Al2O30
Power of Chromatography in Studying the Adsorption Properties of Metal–Organic Frameworks and Their Composites0
Preparation of Chitosan–Graphite-Like Carbon-Nitride Biocoatings on AZ91 Magnesium Alloy0
0.048233032226562