Protection of Metals and Physical Chemistry of Surfaces

Papers
(The TQCC of Protection of Metals and Physical Chemistry of Surfaces is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
IR-Spectroscopic Investigations of Adsorbed Water and Structural Changes in Hydrophobic and Hydrophilic Microfiltration Membranes26
Anodic Dissolution of Iron in the Solutions Simulating the Composition of Corrosive Exometabolites of Organotrophic Bacteria25
The Effect of Sodium Additives on the Anodic Behavior of AlTi0.1 Aluminum Conductor Alloy in a Medium of NaCl Electrolyte15
Relaxation Behavior of Latex Acrylate Polymers. 1. The Effect of Polymerization Factors. 1.1. Statistical Polymer14
Sorption of Water by Aromatic Polyamides14
Preparation of Photoactive TiO2/LTA Zeolite Composites by Solution Technology in Hydrothermal Conditions12
Dynamics of Changes in the Rate and Mechanism of Destruction of a Composite Material Based on Carbon and Ceramics12
Chromate-Free Conversion Coatings Based on Aluminum Alloy 110512
A Comparative Study on Experimental and FEA-Based Simulation of Dry Sliding Wear Behavior of Boronized AISI 304 Stainless Steel at Elevated Temperatures10
Extraction of Copper Ions with Composite Sorbents Based on Chitosan from Aqueous Solutions of Electrolytes in the Presence of a Surfactant9
The Rubus fruticosus Leaf Extract as an Eco-Friendly Copper Corrosion Inhibitor9
Fabrication of Smart pH-Responsive Nanocontainers for Corrosion Protection of Mild Steel9
Modelling of the Boronizing Kinetics of Vanadis 6 Steel by the Integral Diffusion Model8
Adsorption of Xenon and Krypton onto Microporous Carbon Adsorbents from a Depleted Gas–Air Mixture8
Ocimum Basilicum Seeds as a New Natural Corrosion Inhibitor for AA7075-T6 Aluminum Alloy in Nacl Solution: Electrochemical, Thermodynamic, Surface, and Theoretical Studies8
The Structure, Thermal Stability, Heat Resistance, and Diffusion-Barrier Properties of Coatings in the Mo–Y–Si–B System8
Study of MgO-Incorporated Acrylic Emulsion-Based Coating for Antimicrobial Application8
Physicochemical Features of Biocorrosion of Copper and Products Based on It by Microfungi8
Thermal Effects in Mixtures of Boronic Acid with Aluminum after Plastic Deformation under High Pressure8
Wollastonite-Containing Composite Material from Rice Straw7
Features of the Anode Behavior of a Combined Titanium–Aluminum Electrode and the Physicochemical Properties of the Products of Its Dissolution7
Hydrophobic Coatings on Aluminum Substrate Based on Different Metal Oxides: Co3O4, ZnO, and MgO7
Structure and Properties of Ti–C–Ni–Al Wear-Resistant Coatings Obtained by HIPIMS Method7
Surface Modification of Lanthanum Fluoride Nanoparticles with 4-(2-Pyridylazo)resorcinol6
Investigation of Wear Behaviors of Nanodiamond Particles Added Chromium Coating on Porous Powder Metallurgy Specimens6
Modification of Carbon Black for Application in Metal-Ion Batteries. I. The Influence of Heat Treatment on the Structure of Carbon Black6
A Comparative Study on the Shape Evolution of the TiC Particles in Ti–C, Ti–Al–C, and Ti–Si–C Systems after HF Treatment6
Nanoscale Catalysts Based on Metal Chalcogenide Cobalt Clusters for Reduction of Oxygen in Alkaline Media6
Some Thermodynamic and Kinetic Properties of the HCl–H3PO4–H2O–Fe(III) System6
Change in the Filling of Surface States of Aluminum with Electrons during Its Dispersion6
Preparation and Research of Chromium Coatings with Diamond Nanoparticles Deposited Directly on a Monolithic Composite of Niobium and Aluminum5
The Study of Practical Adhesion of a Layer/Substrate System on an AISI 8620 Steel Exposed to Boriding and Borocarburizing5
Increasing Corrosion Resistance of Passivating Metals by Electrochemical Application of Local Nanosized Coatings5
The Effect of a Metal Surface on the Elasticity of Polymer Films5
Electrochemical Coating of PANI/Nanometal Oxide Composites on 304 L Stainless Steel Surface and Investigation of Corrosion Behavior5
Failure Analysis of Second Row-Nozzles Based on FSX-414 Cobalt Alloy in a Gas Turbine Unit5
Evaluation of the Long-Term Corrosion Resistance of Structural Metals and Mapping the Continental Territory of the Russian Federation in Different Periods5
Activation of Anodic Dissolution of the Mn5Si3 Electrode by Fluoride Ions in a Sulfuric Acid Solution5
Synergistic Effect of Plant-Derived Compounds on Corrosion of cp-Ti in Artificial Oral Media: An Experimental and Theoretical DFT Approach5
Physicochemical Studies of Material Obtained by Pressing and Sintering Al Powder Modified with V2O55
Adsorption of Ethane (С2Н6) onto a La–BTC Microporous Metal–Organic Framework Structure at High Pressures5
Anticorrosion Performance of TiO2/Epoxy Films with Doped Polyaniline and Poly(o-ethoxyaniline) Applied to Carbon Steel in 3.5 wt % NaCl Acid Solution4
Adsorption–Catalytic Deformation in the Synthesis of Hydrogenation Catalysts4
Molecular Distributions in a “Vapor–Liquid” Separating System Inside Cylindrical Pores at Three-Phase Boundaries4
Corrosion Behaviour of Boronized Ductile irons in Formic and Nitric Acid Solutions4
Evaluation of the Ability of ANFIS and SVMR Models to Predict the Corrosion Inhibition of Cerium Conversion Coating4
Impact of Surface Modification and Size of Detonation Nanodiamond and Its Agglomerates on Embryonic Stage of Danio rerio (Zebrafish) and Madin-Darby Canine Kidney and Vero Cell Cultures4
The Effect of Chemical Modification of the Surface by Oxysilanes on Changes in the Structural and Phase States of Highly Porous Aluminum Oxyhydroxides at Annealing up to 1200°C4
On the Mechanism of the Growth of Electronic Conductivity upon Reduction in the Excessive Deformation Volume of a Diluted Palladium–Hydrogen System4
Corrosion of Centrifuged Hot Dip Galvanized Pad Hooks Used in GFRC Panels4
Electrochemical Corrosion Behaviour of Electron Beam Welded Copper and SS304 Dissimilar Metal Joints in NaCl-Saturated Solution4
The Influence of Pulse Current Parameters on Microstructure, Morphology, and Corrosion Behaviour of the Electrodeposited Ni–Fe–TiO2 Composite Coating4
Modification of the Surface of Glass with a Silatranyl–Dihydropyran Hybrid: An Approach to New Complex-Forming and Biofunctional Materials4
The Gas-Sensing Properties Dependence of MnO–Mn2O3–MnO2 Systems on the Surface Structure and Chemical Composition at Multistage Isothermal Treatment4
Thermal Effects in Mixtures of Boric Acid with Some Polymers and Low-Molecular-Weight Inorganic Substances after Plastic Deformation under High Pressure4
Electrochemical Behavior of Steel Coated with Organosilicon Self-Organizing Layers4
The 80th Birthday of Academician Aslan Yusupovich Tsivadze4
Natural Aluminosilicates Modified with Organosilicon Thiosemicarbazides for the Extraction of Nickel(II) Ions4
Processing and Development of Corrosion Resistance Surface-Active Thin Film Nanocellulose Composite Coatings for Mild Steel Protection4
Corrosion and Erosion Analysis of AlCrN/CrN Multilayered Coating Applied by Cathodic Arc Physical Vapor Deposition (PVD)4
Evaluation of Corrosion Inhibition and Adsorption Effect of Aqueous Chrysophyllum Albidum Leaves and Peels Extract on Mild Steel in Acidic Medium4
Niobium Carbide Coatings Grown on Cold Work Tool Steel AISI D3 by Thermomechanical Processing: Characterization, Wear and Corrosion Behaviors4
Equations of Two-Component Adsorption from a Liquid on a Solid Surface Taking into Account its Deformation and Electric Charge on the Solid Surface3
Synthesis and Sorption Properties of Lithium Aluminosilicate3
The Influence of Chromium Carbide on Corrosion Resistance of Plasma NiCrBSi Coating3
The Influence of Imidazolium Ionic Liquids on the Chromatographic Behavior of Some Aromatic Acids under Reverse-Phase High-Performance Liquid Chromatography Conditions3
Effect of ZnNiAl-layered Double Hydroxide Morphology on Adsorption of Methyl Orange3
Electrochemical Characterization and Corrosion Analysis of Cu–Ni Films Electrodeposited from Different pH Bath3
Augmentation of Polyethylene Terephthalate Reusability as Efficient Corrosion Inhibitors in Oilfield Protection: Synthesis, Evaluation, and Antibacterial Study3
Concentration and Temperature Dependent Effects on Acoustical Parameters and Thermal Conductivity in Cobalt Oxide Nanofluids3
The Effect of Discharge Pulse Energy in Electrospark Deposition of Amorphous Coatings3
Electrochemical Studies of the State of a Nickel Surface in an Alkaline Medium3
Adsorption of Methane Vapors on a Micro-Mesoporous Carbon Adsorbent During Long-Term Storage of Liquefied Natural Gas3
A Novel Reactive B/N/P-Containing Flame Retardant and Its Application on Cotton Fabrics3
Changes in the Linear Dimensions and Physicomechanical Properties of Flat Palladium Samples during Electrochemical Hydrogen Uptake and Subsequent Application of Different Techniques for Desorption of 3
Study of the Adsorption Properties of Lanthanum-Doped Mesoporous Silica Gels, Modified with Nickel and Silver, by the Method of Gas Chromatography3
Elevated Temperature Wear Behavior of FeCr Slag Coating as an Alternative Coating Material for Caster Rolls3
Corrosion Resistance of Multistep Doped Graphene Oxide/Lanthanum-Based/Silane Composite Coatings on the Magnesium Alloys3
Application of the Random Forest Algorithm of Corrosion Losses of Aluminum for the First Year of Exposure in Various Regions of the World3
A Study of the Kinetics of Adsorption of Zinc(II) Ions by a Natural Aluminosilicate of Eastern Transbaikalia3
An Effective PtNi/CNTs Catalyst for the Hydrogen Oxidation Reaction in an Alkaline Electrolyte3
The Effect of Water-Soluble Tetrasulfophthalocyanine on Physicochemical Physicomechanical Properties of Polyacrylate Films and Films and Coatings of Different Elasticity3
Electrochemical Deposition of Composite Nickel–Graphene Oxide Coatings in the Reverse Mode3
Investigation of the Characteristics of a Graphene-Based Thermal Interface for Cooling Integrated Microcircuits3
Synthesis and Robust Properties Evaluation of PPY-CuO Nanocomposite for Organic Light Emitting Diodes as Electron Transport Layer Material3
Thermal Oxidation of Nanosized Vanadium Diboride3
Application of Mosaic Cathodes Containing TiB (STIM-4) Segments for Deposition of Protective Coatings in the Ti–Al–Cr–B–N System by the Method of Closed Field Unbalanced Magnetron Sputtering2
Non-Gemini Dicationic Surfactants with Alkylthio Group as Corrosion Inhibitor for Mild Steel in HCl Solution2
The Study of the Sorption of Some Benzimidazoles on Hyper-Cross-Linked Polystyrene from Solutions Containing Imidazolium Ionic Liquids by RP HPLC2
Sorption of Boric Acid by FIBAN Anion-Exchange Fibers2
Synthesis and Properties of Nanosized Germanium Particles Obtained in Acetone under the Influence of Laser Radiation2
Synthesis and Examination of the ZrBDC Functionalized Metal–Organic Framework Structure for Carbon Dioxide Adsorption2
Review on Stray Current Distribution and Corrosion Characteristics of Cross-Water Metro Systems2
Effects of Al2O3 Particles on Corrosion Behavior and Microstructure of Al–Al2O3 Composites and Texture of Aluminum Matrix2
Surface Modification of Low-Carbon Steel with 4-Amino-4H-1,2,4-triazole-3,5-dithiol for Corrosion Inhibition in a 0.5 M Solution of Sulfuric Acid2
Gas Chromatographic Study of a Carbon Adsorbent Based on a Liquid Crystal–Unsubstituted β-Cyclodextrin Bilayer2
Refined Microstructural Formation and Corrosion Behavior of Aluminium Nanocrystalline on Nickel-Phosphate Coatings Produced from Electrolytic Time Dependent Factor2
Accumulation of Vapors of Liquified Natural Gas in Porous Carbon Structures2
Effects of Different Zn/Mg Ratio and Ti Content on Hot Extruded 7xxx series Aluminum Alloy2
Corrosiveness of the Atmosphere in Various Climatic Regions of the Russian Federation2
Some Thermodynamic and Kinetic Properties of the H2SO4–H3PO4–H2O–Fe(III) System2
Effect of Different V2O5 Salt Concentrations in Presence of Chloride and Sulfate Salt on Hot Corrosion Behavior of Functionally Graded Lanthanum Zirconate Thermal Barrier Coating2
Corrosion Properties of TiNi Medical Alloy with Bioinert Coatings2
Impact of Zirconium Oxide and Tantalum Carbide Powder Coatings by Plasma Spraying Techniques on Engine Performance2
Inhibition of Corrosion of Mg90 Alloy with Compositions Based on Sodium Oleate. Part I. Salts of Higher Alkenyl and Aryl Carboxylates2
Two-Stage Passivation of Zinc by Solutions of Sodium Dodecylphosphonate and Trialkoxysilanes2
Synthesis and Testing of a Protective Layer on the Surface of a Lithium Electrode for a Lithium–Air Battery2
Kinetic Modeling of Ultrafast Boriding of AISI 1045 Steel and Phase Homogenization2
Viscose Fiber-Based Yarns for Aroma Enhancement2
Catalysts for Oxygen Reduction on a Vulcan XC-72 Carbon Substrate Modified with Transition Metals2
The Formation of Metal–Oxide Heterostructures at Low-Temperature Oxidation of Alloys Based on the Fe–18Cr System2
Energy Characteristics of Hydration of Synthetic Polyampholytes and Their Selectivity to Copper(II) and Nickel(II) Cations2
Improve the Corrosion Behavior of Galvanized Coating by Incorporation of ZrO2 Particles Using a Hot-Dip Method2
On the Use of Positron Flaw Detection in Monitoring the Atomic-Electronic and Defect Structure of Deformed Metal Mixtures2
The Surface Structure of “Monomeric” and “Polymeric” Reversed Stationary Phases and Mechanisms of Carotenoid Separation2
The Role of the Mesh Size of Modified Mica in CO2–Cl– Environment Resistant Epoxy Coatings2
Corrosion Inhibition and Adsorption Behavior of Musa Basjoo Siebold Leaves Extract on Mild Steel in H3PO4 Solution: Experimental and Theoretical Studies2
Microstructure and Tribological Behavior of SiC and BN(h) Reinforced Electrodeposited Ni Matrix Composite Coatings2
5-Chloro-1,2,3-benzotriazole as a Chamber Corrosion Inhibitor for the MA8 Magnesium Alloy2
Effects of Rolling Deformation on the Microstructure and Properties of GNPs/2024Al Composite Materials2
A Study of the Comparison of the Effect of Water-Soluble Phthalocyanine on the Relaxation Properties of Latex Polymer in Films and Coatings2
Effect of Chitosan Crosslinked with Citric Acid Coating on Kraft Paper for Food Packaging Applications2
On the Extraction of Silver and Copper from Aqueous Solutions Using Hydrogenated Palladium2
Study of the Influence of Aluminum Content on the Radiation-Catalytic Activity of Aluminosilicate in the Process of Water Decomposition2
Solid-Phase Hydrogen Diffusion through a Fe92Si6B6 Amorphous Membrane and its Effect on the Mechanical Properties of a Non-Crystalline Environment2
Extraction of Copper Ions by Chitosan-Based Sorbents Modified with Nickel 2-Ethylimidazolate2
Comparison of System Constants of Thermostable Polysiloxane Stationary Liquid Phases of Different Origins2
The Effect of Pulse Duration on the Structure and Mechanical, Tribotechnical, and Optical Characteristics of Zr–B–N Coatings Obtained by the PMS Method2
Electrochemical Assessment of Nano Ethyl Methacrylate-Methyl Acrylate Copolymer as Protective Coating for Copper Based Alloy in Sea Water2
The Effects of Electrolyte Composition on Formation and Properties of Micro-Arc Oxidation Layer of 6082-T6 Al Alloy2
Experimental and Theoretical Investigations of the Inhibition of the Corrosion of Mild Steel in HCl by Synthesized Piperazin Derivatives2
Optimal Design of a Digital Baffled Batch Reactor for Model Fuel: Adsorption Desulfurization Based on New Adsorbent2
The Relaxation Behavior of Latex Acrylate Polymers. 2. The Interrelationship between Physicochemical and Physicomechanical Properties of Polymers2
Green Synthesis of N,N'-Bis(3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)-oxalamide: A Corrosion Inhibitor of Carbon Steel in Acidic Medium2
DSC and X-ray Diffraction Study of a Mixture of Aluminum with 50 wt % of Aluminum Oxide after Plastic Deformation under High Pressure2
Sorption-Catalytic Increase of Rhodamine B Dye Destruction Efficiency in Barrier Discharge Plasma by Zeolite NaX and Diatomite Granules with TiO2 Coating2
The Effect of a Metal-Substrate Surface on the Relaxation Behavior of Acrylic Coatings2
Corrosion and Wear Enhancement of Composite Layers over PEO-Coated Mg Alloys: A Review2
Effect of Alloying Elements on the Microstructure and Corrosion Resistance of Zn–5Al–2Mg Alloy2
Control of Metal–Oxide Coatings–Absorbers of Optical Radiation in Solar Power Plants. 1. Methodology2
Carbon Nanofiber Gas-Diffusion Anodes Based on a Copolymer of Acrylonitrile with Methyl Acrylate for High-Temperature Polymer-Electrolyte Membrane Fuel Cell2
Preparation and Structure of Chromium Coatings Doped with Diamond Nanoparticles Deposited Directly on a Monolithic Composite of Molybdenum and Aluminum2
Corrosion Performance of the Zn Coatings on AISI 1212 Mild Steel in 0.5 M NaCl Medium: Influence of Thicknesses of Metallic Film2
0.25667095184326