Lubricants

Article	Citations
Novel Water-Based Biolubricants Using Choline Ionic Liquids	151
Wear Prediction and Chaos Identification of Rigid Flexible Coupling Multi-Link Mechanisms with Clearance	127
Development of Hybrid Intelligent Models for Prediction Machining Performance Measure in End Milling of Ti6Al4V Alloy with PVD Coated Tool under Dry Cutting Conditions	116
Evaluation of the Role of Lubricant Additives in Emission Control	78
Simple Laser-Induced Hexagonal Boron Nitride Nanospheres for Enhanced Tribological Performance	73
Revisiting the Influence of Contact Length and Surrounding Medium on Metal Cutting Tribology	66
An Investigation of the Sequential Micro-Laser Drilling and Conventional Re-Drilling of Angled Holes in an Inconel 625 Ni-Based Alloy	63
Theoretical Investigations on Tribological Properties of Air Foil Thrust Bearings during Start-Up Process	56
Vibration Friction Investigation on the NCS of Joints of the CNC Machine Tools Considering Friction Factor	54
Hard-Anodized Aluminum Alloy: Wear Properties in Vegetable Oils	52
On the Salt Bath Cleaning Operations for Removal of Lubricants on the Surface of Titanium Alloy Aerospace Fasteners	50
Static Friction in a Cable-Driven Transmission—Modeling and Identification of Load Effects	49
Study on Distribution of Lubricating Oil Film in Contact Micro-Zone of Full Ceramic Ball Bearings and the Influence Mechanism on Service Performance	49
Performance Characteristics of Spur Gears Hobbed under MQL, Flood Lubrication, and Dry Environments	42
Enhancement of Deep Drilling for Stainless Steels by Nano-Lubricant through Twist Drill Bits	41
Topology Optimization of Textured Journal Bearings	41
Study on the Magnetic Contact Mechanical Properties of Polyurethane-Based Magnetorheological Elastomer Sealing Materials	41
Determination of the Preload of Bolts for Structural Health Monitoring of a Multi-Bolted Joint: FEM Approach	39
Mixed Friction in Fully Lubricated Elastohydrodynamic Contacts—Theory or Reality	39
Effect of Thermal Load Caused by Tread Braking on Crack Propagation in Railway Wheels on Long Downhill Ramps	39
Exact Model Order Reduction for the Full-System Finite Element Solution of Thermal Elastohydrodynamic Lubrication Problems	39
Mixed EHL Problems: An Efficient Solution to the Fluid–Solid Coupling Problem with Consideration of Elastic Deformation and Cavitation	39
Identification and Validation of Linear Friction Models Using ANOVA and Stepwise Regression	38
Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase	38
Improving Wear Resistance of DLC-Coated Metal Components During Service: A Review	36

Vibration Analysis of the Double Row Planetary Gear System for an Electromechanical Energy Conversion System	35
Theoretical and Experimental Flow Characteristics of a Large-Scale Annular Channel in Terms of Deformation Gradient, Eccentricity, and Water Compressibility	35
Numerical Simulations and Experimental Validation of Squeeze Film Dampers for Aircraft Jet Engines	34
Criteria for Evaluating the Tribological Effectiveness of 3D Roughness on Friction Surfaces	34
Research on Evaluation Indicator of Ice Rink and Curling Stone Motion for the 2022 Beijing Winter Olympic Games Based on Video Recognition Method	34
Analysis of Coefficient of Friction of Deep-Drawing-Quality Steel Sheets Using Multi-Layer Neural Networks	34
Investigation of the Friction and Wear Behavior of Cr-Mo-V Steel with Different Surface Treatment Processes	33
Friction Properties of Alumina–Silicon Carbide–Silver–Graphene Nanoplatelet Self-Lubricating Composite Prepared by SPS Technique	33
Comparative Analysis of Fully Floating and Semi-Floating Ring Bearings in High-Speed Turbocharger Rotordynamics	32
Analysis of the Turbulent Lubrication of a Textured Hydrodynamic Journal Bearing	32
Advanced Machine Learning Approaches for Predicting Machining Performance in Orthogonal Cutting Process	31
Environmentally Friendly Phosphating Treatment for Wear-Resistant and Anti-Corrosion Coating on Steel Substrate	30
Inhibition of Mild Steel Corrosion by 4-benzyl-1-(4-oxo-4-phenylbutanoyl)thiosemicarbazide: Gravimetrical, Adsorption and Theoretical Studies	30
Influence of Grease Properties on False Brinelling Damage of Rolling Bearings	28
Carbon Nanomaterial-Based Lubricants: Review of Recent Developments	27
Synthesis, Stability, and Tribological Performance of TiO2 Nanomaterials for Advanced Applications	26
Multi-Objective Optimization of Tribological Characteristics for Aluminum Composite Using Taguchi Grey and TOPSIS Approaches	26
Preparation and Tribological Behavior of Nitrogen-Doped Willow Catkins/MoS2 Nanocomposites as Lubricant Additives in Liquid Paraffin	25
Review of the State-of-the-Art Application of the Quantitative Structure Tribo-Ability Relationship Model of Lubricants in China	25
Dynamic Temperature Prediction on High-Speed Angular Contact Ball Bearings of Machine Tool Spindles Based on CNN and Informer	25
Thermal Characteristics of Dry Gas Seal in Startup Process Considering Microscale Effects	25
Thrust-Bearing Layout Design of a Large-Sized Hydrostatic Rotary Table to Withstand Eccentric Loads for Horizontal Boring Machine Applications	25
CFD Investigation on Oil Injection Lubrication of Meshing Spur Gears via Lattice Boltzmann Method	25
Advances in the Application of Vegetable-Oil-Based Cutting Fluids to Sustainable Machining Operations—A Review	25
Parametric Structure Optimization Design of High-Pressure Abrasive Water Jet Nozzle Based on Computational Fluid Dynamics-Discrete Element Method (CFD-DEM)	25
Experimental Study on Friction and Wear Characteristics of Hydraulic Reciprocating Rotary Seals	24
On-Line Feedback Control of Sliding Friction of Metals Lubricated by Adsorbed Boundary SDS Films	24
Effect of Pipe Wall Wear Defects on the Flow Characteristics of Slurry Shield Discharge Pipe	24
Non-Similar Solutions of Dissipative Buoyancy Flow and Heat Transfer Induced by Water-Based Graphene Oxide Nanofluid through a Yawed Cylinder	24
Deuterium Tracer for Accurate Online Lube-Oil-Consumption Measurement: Stability, Compatibility and Tribological Characteristics	24
Friction and Wear Properties of a Nanoscale Ionic Liquid-like GO@SiO2 Hybrid as a Water-Based Lubricant Additive	23
Stability and Thermal Conductivity of Mono and Hybrid Nanoparticles Dispersion in Double-End Capped PAG Lubricant	23
A Tribological Study of ta-C, ta-C:N, and ta-C:B Coatings on Plastic Substrates under Dry Sliding Conditions	23
Mechanical and Tribological Performance of Additively Manufactured Nanocrystalline Aluminum via Cryomilling and Cold Spray	23
Improved Tribological Properties of Epoxy Cement Reinforced with Impact-Resistant Core-Shell Structured Polymer Nanoparticles	22
Advanced Industrial Lubricants and Future Development Trends of Tribo-Systems for Tribological Performance Evaluation	22
Dynamic Analysis of Dual Parallel Spring-Supported Tilting Pad Journal Bearing	22
Understanding the Influences of Multiscale Waviness on the Elastohydrodynamic Lubrication Performance, Part I: The Full-Film Condition	22
A Phenomenological Model for Estimating the Wear of Horizontally Straight Slurry Discharge Pipes: A Case Study	22
The Effect of Temperature and Asphaltene Content on the Lubricating Properties of Fuel Oils	22
Experimental Investigation of an Incremental Contact Model for Hyperelastic Solids Using an In Situ Optical Interferometric Technique	21
Unbalance Response Analysis of a Spindle Supported on Gas Bearings: A Comparison between Different Approaches	21
Experimental Identification of the Void Fraction in a Large Hydrodynamic Offset Halves Bearing	21
Effect of CH4 Flow Rate on the Tribological Behaviors of TiCN Films against Si3N4 Ceramic and Steel Ball	21
Numerical Investigation of Bump Foil Configurations Effect on Gas Foil Thrust Bearing Performance Based on a Thermos-Elastic-Hydrodynamic Model	21
Drag Losses of Wet Brakes and Clutches—A Scoping Review	20
Theoretical and Experimental Investigation of Dynamic Characteristics in Propulsion Shafting Support System with Integrated Squeeze Film Damper	20
Tribological Properties of 7A04 Aluminum Alloy Enhanced by Ceramic Coating	20
Tribological Properties of Borate-Based Protic Ionic Liquids as Neat Lubricants and Biolubricant Additives for Steel-Steel Contact	20
Experimental Study on the Lubrication Enhancement of Slider-on-Disc Contact by Stearic Acid Adsorption under Limited Lubricant Supply	20

An Investigation on the Effect of Mango Seed and Pongamia Oil-Based Cutting Fluids on Surface Morphology During Turning of AISI 304 Steel	20
Novel Tribometer for Coated Self-Lubricating Spherical Plain Bearings in a Vacuum	20
Thermal Error Analysis of Five-Axis Machine Tools Based on Five-Point Test Method	20
Wear Analysis of Friction Stir Processed AA7075-SiC-Graphite Hybrid Surface Composites	20
Effect of Argon Flow Rate on Tribological Properties of Rare Earth Ce Doped MoS2 Based Composite Coatings by Magnetron Sputtering	19
Influence of Tribolayer on Rolling Bearing Fatigue Performed on an FE8 Test Rig—A Follow-up	19
Synergistic Effect of Spark Plasma Sintering Driven Solid-Solution Phases on Scratch Resistance in Two-Dimensional Materials	19
Improving the Endoprosthesis Design and the Postoperative Therapy as a Means of Reducing Complications Risks after Total Hip Arthroplasty	19
Lubrication, Friction and Wear Characteristics of Textured Surface Slipper Pairs in Axial Piston Pumps	19
Influence of Sulfur-Phosphorus Additive Interaction Effects on the Performance of Roller Bearing Greases	19
Investigation of Microstructural, Mechanical, and Tribological Properties of TiC and MWCNT Reinforced Hot-Pressed Scalmalloy® Hybrid Composites	19
Investigation of Mechanical Properties of Grey Cast Irons Reinforced with Carbon Titanium Nitride (TiNC)	19
Impact of Temperature Variation on Friction Behaviour of Rare Earth-Doped Diamond-like Carbon Coatings with Ionic Liquid Lubricants	19
Effect of Gear Body Temperature on the Dynamic Characteristics of Spiral Bevel Gears	19
Effects of Contact Characteristics on Dynamic Response of Planar Mechanical Systems with Lubricated Revolute Joint	18
Experimental Study: Bearing Degradation Caused by Electrical Currents and Voltages at Low Speeds	18
Towards a Standard Approach for the Twin Disc Testing of Top-Of Rail Friction Management Products	18
Experimental Study on Thermal Elastohydrodynamic Lubrication Performance Calculation and Take-Off Speed of Thrust Bearing of Canned Motor Pump	18
AsdinNorm: A Single-Source Domain Generalization Method for the Remaining Useful Life Prediction of Bearings	18
Research on RV Reducer Shaft Bearing Force and Structural Optimization	18
Preparation and Tribological Performance of Multi-Layer van der Waals Heterostructure WS2/h-BN	18
The Effects of the Lubricant Properties and Surface Finish Characteristics on the Tribology of High-Speed Gears for EV Transmissions	18
Theoretical and Numerical Investigation of Reduction of Viscous Friction in Circular and Non-Circular Journal Bearings Using Active Lubrication	18
The Target Detection of Wear Particles in Ferrographic Images Based on the Improved YOLOv8	18
Influence of Counter Surface Roughness and Lay on the Tribological Behaviour of Self-Lubricating Bearing Materials in Dry Sliding Conditions at High Contact Pressures	17
Analysis of Grooves Used for Bearing Lubrication Efficiency Enhancement under Multiple Parameter Coupling	17
Analysis of the Wear Mechanism and the Influence of the Chemical Composition and Repair Welds of the Pig Iron Wagon Wheels	17
Thermal Effects in Slender EHL Contacts	17
Tribology in Germany: Latest Research and Development	17
Research on the Relationship between Dynamic Characteristics and Friction Torque Fluctuation of CMGB under the Condition of Time-Varying Moment	17
Tribological Behavior and Wear Mechanism of Ni-Nano TiO2 Composite Sintered Material at Room Temperature and 600 °C	17
Research on Simulation Method for Wear for Dynamic Seal in Axial Flux Hub Motor	17
A Study on the Corrosion Resistance of a Coating Prepared by Electrical Explosion of 321 Metal Wire	16
Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling	16
Recent Studies on Nanomaterials as Additives to Lubricants Under Electrified Conditions for Tribology: Review	16
Frictional Response of Reinforced Polymers under Quasistatic and Fast-Transient Dry Contact Conditions	16
CPU Performance Improvement Using Novel Thermally Conductive Carbon Nano Grease	16
Synergistic Effect of Acrylate of Dialkyl Dithiophosphoric Acid Combined with Molybdenum Dialkyl Dithiocarbamate as Additives in Gear Oil	16
Experimental Investigation on Synergetic Effects of Micro Grooves and WSe2 in Sliding Contact	16
Effect of Nanodiamonds on Friction Reduction Performance in Presence of Organic and Inorganic Friction Modifiers	16
Ceramic–Ceramic Hip Implants: Investigation of Various Factors Associated with Squeaking	16
Rolling Contact Fatigue and White Etching Cracks of Bearings	15
Dynamic Precision and Reliability of Multi-Link Linkages with Translational Pair Clearance	15
Theoretical Model Development and Mixed Lubrication Analyses of Rolling Piston Type Rotary Compressors: A Review	15
Comparative Evaluation of the Shear Adhesion Strength of Ice on PTFE Solid Lubricant	15
Research on Splash Lubrication Characteristics of a Spiral Bevel Gearbox Based on the MPS Method	15
Tribological Properties of Al2O3/Graphite-Al2O3 Laminated Composites under Water Lubrication Conditions	15
Experimental Investigations on Wear in Oscillating Grease-Lubricated Rolling Element Bearings of Different Size and Type	15
Development of a Digital Model for Predicting the Variation in Bearing Preload and Dynamic Characteristics of a Milling Spindle under Thermal Effects	15
Tribology Performance of Polyol-Ester Based TiO2, SiO2, and Their Hybrid Nanolubricants	15
A Review on Magnetorheological Jet Polishing Technique for Microstructured Functional Surfaces	15
Synthesis, Wear and Corrosion of Novel Electrospark and Electrospark–Electrochemical Hybrid Coatings Based on Carbon Steels	15
Programmable Control of Droplets on Phase-Change Lubricant-Infused Surfaces Under Low Voltage	15
Comparison of Machining Performance of Ti-6Al-4V under Dry and Cryogenic Techniques Based on Tool Wear, Surface Roughness, and Power Consumption	15
Optimization Design of Aerostatic Bearings with Square Micro-Hole Arrayed Restrictor for the Improvement of Stability: Theoretical Predictions and Experimental Measurements	15
Analysis of the Tribological and Dynamic Performance of the Self-Adapting Water-Lubricated Stern Bearing	15
Effects of Additives Adsorbed to Wet Clutch Disks on Their Tribological Performance Found in a Comparative Investigation	14
High Temperature Friction and Wear Behavior of PTFE/MoS2 Composites	14
Using the Principle of Newton’s Rings to Monitor Oil Film Thickness in CNC Machine Tool Feed Systems	14
Structural Superlubricity of Two-Dimensional Materials: Mechanisms, Properties, Influencing Factors, and Applications	14
The Improvement of the Wear Resistance of T15 Laser Clad Coating by the Uniformity of Microstructure	14
Effect of Structural Flexibility of Wheelset/Track on Rail Wear	14
Performance of TiSiN/TiAlN-Coated Carbide Tools in Slot Milling of Hastelloy C276 with Various Cooling Strategies	14
RUL Prediction of Rolling Bearings Based on Fruit Fly Optimization Algorithm Optimized CNN-LSTM Neural Network	14
Tribo-Dynamics and Fretting Behavior of Connecting Rod Big-End Bearings in Internal Combustion Engines	14
Characterisation of the Contact between Cross-Country Skis and Snow: A Macro-Scale Investigation of the Apparent Contact	14
Tribological and Micro-Mechanical Properties of Injected Polypropylene Modified by Electron Radiation	14
Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact	14
U-Net Segmentation with Bayesian-Optimized Weight Voting for Worn Surface Analysis of a PEEK-Based Tribological Composite	14
Research on an Intelligent Classification Algorithm of Ferrography Wear Particles Based on Integrated ResNet50 and SepViT	14
High-Temperature Superlubricity Performance of h-BN Coating on the Textured Inconel X750 Alloy	14
Fabrication and Tribology Properties of Cr-Coated Cemented Carbide under Dry Friction Conditions	14
Analysis of the Load-Bearing Characteristics of Gas-Extruded Membrane Bearings Based on the Alternating Direction Implicit Method	14
Effect of Grease Viscosity on Channeling Properties of Ball Bearings	13
Simulation Study of the Effect of Oil Injection Speed on the Air Curtain of High-Speed Bearings	13
Enhanced Tribological Performance of Melamine Long-Chain Alcohol Esters in High-Temperature Boundary Lubrication	13
Calculation and Analysis of Equilibrium Position of Aerostatic Bearings Based on Bivariate Interpolation Method	13
Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering	13
Microstructure and Mechanical Properties of Laser-Clad Inconel 718 Coatings on Continuous Casting Mold Copper Plate	13
Influence of Additive Chemistry on the Tribological Behavior of Steel/Copper Friction Pairs	13

Influence of Si3N4 on the Dry Sliding Wear Characteristics of Stir-Cast Cu-10Sn/xSi3N4 Metal Matrix Composite for Bearing Applications	13
Development of Doped Carbon Quantum Dot-Based Nanomaterials for Lubricant Additive Applications	13
Fundamental Structure–Function Relationships in Vegetable Oil-Based Lubricants: A Critical Review	13
Mechanical Properties and Tribological Behavior of Al2O3–ZrO2 Ceramic Composites Reinforced with Carbides	13
Real-Time Prediction of Pressure and Film Height Distribution in Plain Bearings Using Physics-Informed Neural Networks (PINNs)	13
Synthesis of Multi-butylnaphthalene Base Oils Catalyzed by Trifluoromethanesulfonic Acid and Its Lubricating Properties	13
Limitary State of Heavy-Duty Engine Oils and Their Evaluation According to the Change of Tribological Properties during Operation	13
A Minimal Input Engine Friction Model for Power Loss Prediction	13
The Impact of Surface Roughness on the Friction and Wear Performance of GCr15 Bearing Steel	13
A Comparison of the Tribological Properties of Two Phosphonium Ionic Liquids	13
Theoretical Evaluation of Lubrication Performance of Thrust-Type Foil Bearings in Liquid Nitrogen	13
Tribocorrosive Aspects of Tungsten Carbide, Silicon Nitride, and Martensitic Steel under Fretting-like Conditions	13
Identification and Regulation of Cold Rolling Interface State Based on a Novel Modified Forward Slip Model	13
Machine Learning-Based Predictive Model to Assess Rheological Dynamics of Eco-Friendly Oils as Biolubricants Enriched with SiO2 Nanoparticles	13
Bidirectionally Coupled FE-CFD Simulation Study on MQL Machining Process of Ti-6Al-4V Alloy	13
Tribocorrosion Behavior of γ′-Fe4N Nitride Layer Formed on Mild Steel by Plasma Nitriding in Chloride-Containing Solution	13
Ensemble Deep Learning for Wear Particle Image Analysis	13
Elastohydrodynamic Lubrication of Compliant Circular Contacts near Glass-Transition Temperature	13
Static Characteristics of a Micro Bidirectional Rotating Thrust Bearing with Novel Herringbone Grooves	13
Influence of a Walnut Shell Biochar Additive on the Tribological and Rheological Properties of Vegetable Lubricating Grease	13
Stability Analysis of the Rotor-Journal Bearing System Considering Shear and Gaseous Cavitation	13
Investigation of the Structural, Mechanical and Tribological Properties of Plasma Electrolytic Hardened Chromium-Nickel Steel	13
Effect of Friction Reducers with Unreinforced PEEK and Steel Counterparts in Oil Lubrication	13
Oil Change Interval Evaluation of Gearbox Used in Heavy-Duty Truck E-Axle with Oil Analysis Data	13
Cold Spray Deposition of MoS2- and WS2-Based Solid Lubricant Coatings	13
Influence of Molecular Structure on the Physicochemical and Tribological Properties of Biolubricants: A Review	13
Analysis of Thermo-Hydrodynamic Lubrication of Three-Lobe Semi-Floating Ring Bearing Considering Temperature–Viscosity Effect and Static Pressure Flow	12
The Twelve Principles of Green Tribology: Studies, Research, and Case Studies—A Brief Anthology	12
Impact of Boron-Containing Lubricant Additive on Three-Way Catalyst Reactivity and Physicochemical Properties	12
Research on an Improved Auxiliary Classifier Wasserstein Generative Adversarial Network with Gradient Penalty Fault Diagnosis Method for Tilting Pad Bearing of Rotating Equipment	12
Study on the Wear Performance and Wear Prediction of Leaf Spring Calipers under Lubricating Medium Conditions	12
The Effect of Ethanol Fuel-Diluted Lubricants on the Friction of Oil Control Ring Conjunction: A Combined Analytical and Experimental Investigation	12
Lubrication Performance of Sunflower Oil Reinforced with Halloysite Clay Nanotubes (HNT) as Lubricant Additives	12
Triboelectric Performance of Ionic Liquid, Synthetic, and Vegetable Oil-Based Polytetrafluoroethylene (PTFE) Greases	12
Machine Learning for Film Thickness Prediction in Elastohydrodynamic Lubricated Elliptical Contacts	12
Effect of Y on Microstructure and Properties of Al0.8FeCrCoNiCu0.5 High Entropy Alloy Coating on 5083 Aluminum by Laser Cladding	12
Tribological, Oxidation and Thermal Analysis of Advanced Microwave–Hydrothermal Synthesised Ti3C2Tx MXene as Additives in Outboard Engine Oil	12
Impact of Soot on Internal Combustion Engine Lubrication—Oil Condition Monitoring, Tribological Properties, and Surface Chemistry	12
Analysis of Modified Finite Length Journal Bearing under Position Perturbation	12
Microstructure and Wear Resistance of Fe3Al Coating on Grey Cast Iron Prepared via Direct Energy Deposition	12
Contact of Rough Surfaces: An Incremental Model Accounting for Strain Gradient Plasticity	12
Monitoring Tribological Events by Acoustic Emission Measurements for Bearing Contacts	12
Tribological Behaviour of Hypereutectic Al-Si Composites: A Multi-Response Optimisation Approach with ANN and Taguchi Grey Method	12
Deterioration Mechanism and Status Prediction of Hydrocarbon Lubricants under High Temperatures and Humid Environments	12
Microstructure, Mechanical and Tribological Properties of Cu40Zn-Ti3AlC2 Composites by Powder Metallurgy	12
CFD-Predicted Rotordynamic Characteristics for High-Temperature Water Liquid Seal Considering Tooth Deformation	12
Three-Dimensional Finite Element Analysis of Contact Problem in Dry Friction Clutches	12
‘Triangle Ester’ Molecules as Blending Components in Mineral Oil: A Theoretical and Experimental Investigation	12
Strengthening Properties and Wear Resistance of the Cu-xNi-yCo-Cr-Si Alloy by Varying Ni/Co and Zr Addition	11
Analysis of the Influencing Factors of Aerostatic Bearings on Pneumatic Hammering	11
The Influence of MoS2 Coatings on the Subsurface Stress Distribution in Bearing Raceways	11
Wear of Ni-Based Superalloy Tools in Friction Stir Processing of Commercially Pure Titanium	11
Crushing Removal Conditions and Experimental Research on Abrasive Water Jets Impacting Rock	11
Key Technologies and Design Methods of Ultra-Precision Aerostatic Bearings	11
Influence of Additives Concentration on the Electrical Properties and the Tribological Behaviour of Three Automatic Transmission Fluids	11
Influence of Nanoparticles in Lubricant on Sliding Contact of Atomic Rough Surfaces—A Molecular Dynamics Study	11
Theoretical and Experimental Investigation of the Thermal Stability of a Cycloid Speed Reducer	11
Influence of Cavitation on the Heat Transfer of High-Speed Mechanical Seal with Textured Side Wall	11
A Closer Look at the Contact Conditions of a Block-on-Flat Wear Experiment	11
Physical Analysis of Thermophoresis and Variable Density Effects on Heat Transfer Assessment along a Porous Stretching Sheet and Their Applications in Nanofluid Lubrication	11
Review on Tribological and Vibration Aspects in Mechanical Bearings of Electric Vehicles: Effect of Bearing Current, Shaft Voltage, and Electric Discharge Material Spalling Current	11
Optimizing Femtosecond Texturing Process Parameters Through Advanced Machine Learning Models in Tribological Applications	11
Tribological Evaluation of Brake Materials with Silk and Grewia optiva Natural Fibers	11
Non-Polar Chain-Enabled Suspension of Carbon Nanoparticles in Base Oil	11
Polymer Dispersion Effects on Drag, Heat Transfer, and Mass Transfer in Non-Newtonian Based Nanofluids	11
Improving the Surface Integrity and Tribological Behavior of a High-Temperature Friction Surface via the Synergy of Laser Cladding and Ultrasonic Burnishing	11
A Brake System Coefficient of Friction Estimation Using 3D Friction Maps	11
Mechanical and Tribological Behaviour of Surface-Graphitised Al-1100 Alloy	11
Tribological Properties of the Nanoscale Spherical Y2O3 Particles as Lubricant Additives in Automotive Application	11
Effects of Gold Mine Tailings as an Additive on the Tribological Performance of Lubricating Polyurea Grease	11
Electric Potential Controlled Ionic Lubrication	11
The Investigation of Viscometric Properties of the Most Reputable Types of Viscosity Index Improvers in Different Lubricant Base Oils: API Groups I, II, and III	11
Nonlinear Dynamic Analysis of Gas Bearing-Rotor System by the Hybrid Method Which Combines Finite Difference Method and Differential Transform Method	11
Parameter Optimization for the Improvement of Tribological Behavior of Textured Tapered Roller Bearings	11
Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films	11
Temperature Characteristics of Axle-Box Bearings Under Wheel Flat Excitation	11
Reducing Wheel Loading in the Grinding of Titanium Alloys through Ultrasonic-Assisted Plasma Oxidation Modification	11
Evaluating the Tribological Behaviour in Cutting Operations Using a Modified Ball-on-Disc Open Tribotester	11
Effect of Sliding on the Relation of Tribofilm Thickness and Wear	11
Effect of Substrate Roughness on the Friction and Wear Behaviors of Laser-Induced Graphene Film	10
Influence of Engine Oil Degradation on Sliding Bearings, with Special Focus on Different Degrees of Nitration	10
Properties of Laser-Alloyed Stainless Steel Coatings on the Surface of Gray Cast Iron Discs	10
Three-Body Abrasive Wear Performance of High Chromium White Cast Iron with Different Ti and C Content	10
A Mixed Lubrication Model of Piston Rings on Cylinder Liner Contacts Considering Temperature-Dependent Shear Thinning and Elastic–Plastic Contact	10
Study on the Effects of CeO2 on the Micro-Structure and Wear Resistance of CuCrZr Plasma Cladding Coatings	10
Comparative Study of Tribological Properties of Modified and Non-modified Graphene-Oil Nanofluids under Heated and Non-heated Conditions	10
Thermoplastic Labyrinth Seals Under Rub Impact: Deformation Leakage Mechanisms and High Efficiency Optimization	10
Material Optimization Method for a Spring-Energized Seal Based on Wear Analysis	10
Lubrication Modeling of the Reciprocating Piston with High Lateral Load and Various Conditions in a Swash Plate-Type Piston Pump	10
Tribological Behavior of Ice on Rough Surfaces	10
Mass and Energy Balance of a Three-Body Tribosystem	10
Influence of Friction on the Formability of Fe-Zn-Coated IF Steels for Car Body Parts	10
Corrosion Behavior and Comprehensive Evaluation of Al0.8CrFeCoNiCu0.5B0.1 High-Entropy Alloy in 3.5% NaCl Solution	10
A Spectroscopic DRIFT-FTIR Study on the Friction-Reducing Properties and Bonding of Railway Leaf Layers	10
Influence of Fluid Film Bearings with Different Axial Groove Shapes on Automotive Turbochargers: An Experimental Study	10