Ain Shams Engineering Journal

Article	Citations
Investigating the potential of optical metamaterials with highly dispersive solitons in twin couplers with stochastic perturbations and white noise effects	303
Editorial Board	253
Hyperparameter-tuned variational Bayesian Gaussian mixture model-based fault time detection method for distribution networks with distributed generation	221
An empirical study on the formation mechanism of trust between the owner and the PMC contractor under the PMC model	176
Modeling of bond stress-slip relationships of mono-prestressing strands with H-anchorage dead end	149
Optimal arrangement of rotating hot cylinders in a compact heat exchanger based on energy and exergy analysis	134
Three-dimensional numerical study for determining the optimum diversion angle of bifurcating channels	124
“Calculation of onset voltage of corona over a solid dielectric surface encasing rod-rod gap”	122
Numerical investigation of piezoelectric energy harvesting from a multi-mode T-shaped structure	117
Deep learning based optimization model for document layout and text recognition	116
Comparative analysis of regression and enhanced label propagation approaches for predicting airborne dust particle levels in environmental data	114
A novel consensus-based decentralized framework for optimal energy management in cooperative multi-microgrid networks using ADMM	111
Single-stage modified Vienna rectifier SEPIC AC-DC LED driver	103
Advanced NLP techniques for optimizing ideological and political education text analysis	103
Enhancing virtual indoor environment and energy efficiency with real-time BIM and Unreal Engine integration in building lighting design	99
A computational method to predict methylation of CpG sites in Chr21 using sequence features from WGS with 450 K array features	96
Design and optimization of nonlinear component of block cipher: Applications to multimedia security	91
Governing sustainable urban brownfield redevelopment in China: Applying the Quintuple Helix model in Chengdu	89
Predicting dissolved oxygen concentration using different neural network models	87
Some post quantum Milne type inequalities with simulation	86
Impact of uncertainties in wind and solar energy to the optimal operation of DG based on MCS	83
Adaptive fast-reaching nonsingular terminal sliding mode tracking control for quadrotor UAVs subject to model uncertainties and external disturbances	81
Heat transfer analysis of unsteady MHD slip flow of ternary hybrid Casson fluid through nonlinear stretching disk embedded in a porous medium	80
Comparison of three machine learning models for the prediction of hourly PV output power in Saudi Arabia	78
RETRACTED: Advanced fixed point techniques for solving fractional p−Laplacian boundary value problems with impulsive effects	77

The major problems between main contractors and subcontractors in construction projects in Egypt	77
Discovering epistasis interactions in Alzheimer’s disease using integrated framework of ensemble learning and multifactor dimensionality reduction (MDR)	76
Effects of independent wheels steering system on vehicle cornering performance and road safety of the smart cities	76
LeafDeSNet: A MultiClass plant leaf diseases classification model with entropy-controlled GLEO for feature selection	74
A Unified index of water resources systems vulnerability assessment – Translating the theoretical approach into a simple tool to assess climate change Impact: Case study in Limpopo River Basin, Africa	74
A digital audio data protection method using parametric action of generalised triangle group on GF(28)	73
Incremental parameterized-kernel fractional operators: theory, novel Banach spaces, and machine learning applications	72
Optimization of thermal performance in hybrid nanofluids for parabolic trough solar collectors using Adams–Bashforth–Moulton method	71
New calibration estimation procedure in the presence of unit non response	70
Reducing neural network complexity via optimization algorithms for fault diagnosis in renewable energy systems	69
Computational analysis and chaos control of the fractional order syphilis disease model through modeling	69
Analyzing the effectiveness of building integrated Photovoltaics (BIPV) to reduce the energy consumption in Dubai	68
Deep learning and optimization-based feature selection for fetal health classification using CTG data	68
Improving the thermal performance of roof through the integration of certain phase change materials for minimizing the heat transfer in buildings	68
Key factors for implementation of total quality management in construction Sector: A system dynamics approach	67
Cyber secure consensus of fractional order multi-agent systems with distributed delays: Defense strategy against denial-of-service attacks	66
Optimal Artificial Intelligence Technique for LVRT Capability Improvement of a Grid-tied Wind Energy Conversion System: A MGOANFIS-PI Methodology	66
The effect of seating elements in accordance with the for social distance on the shopping mall preferences of customers in the post-pandemic process	66
Analysis of periodic wave soliton structure for the wave propagation in nonlinear low–pass electrical transmission lines through analytical technique	64
Offering a channel for cooling three lithium-ion battery packs with water/Cu nanofluid: An exergoeconomic analysis	64
A hybrid approach for non-linear fractional Newell-Whitehead-Segel model	64
Hybrid augmentation for multi-channel deep learning in guava leaf disease detection	64
Exploring soliton dynamics and wave interactions in an extended Kadomtsev-Petviashvili-Boussinesq equation	63
Editorial Board	62
Developing SPIM-TA: a maturity-level framework for systematic process improvement in software testing automation	62
A path planning method based on noisy D3QN algorithm with N-step updates	62
Experimental visualization of soil arching evolution and collapse in pile-supported embankments under cyclic loading	62
Removal of ciprofloxacin and indigo carmine from water by carbon nanotubes fabricated from a low-cost precursor: Solution parameters and recyclability	61
Biopolymer chitosan: Potential sources, extraction methods, and emerging applications	61
Towards accurate and efficient waste image classification: A hybrid deep learning and machine learning approach	61
A developed eagle-strategy supply-demand optimizer for solving economic load dispatch problems	61
Numerical investigation of heat and mass transfer study on MHD rotatory hybrid nanofluid flow over a stretching sheet with gyrotactic microorganisms	60
Performance enhancement and power management strategy of an autonomous hybrid fuel cell/wind power system based on adaptive neuro fuzzy inference system	59
Instantaneous and exponential decay point source effects on two-dimensional heavy metal transport with adsorption and desorption in soil	59
Modeling and implementation of a machine learning-based wireless charging system with high misalignment tolerance	59
Using metaheuristic algorithms to improve the estimation of acidity in Fuji apples using NIR spectroscopy	57
Utilizing lexicographic max product of picture fuzzy graph in human trafficking	56
3D printing and virtual reality in the study of muqarnas: a comparative approach	56
Differential optimization measurement technique for magnetic gradient tensors in magnet positioning	56
Optimal CONOPT solver-based coordination of bi-directional converters and energy storage systems for regulation of active and reactive power injection in modern power networks	55
Unlocking certainty in commercial development A data-driven experiential retail strategy for Cairo’s coffee sector	55
Reactive power optimization based on adaptive multi-objective optimization artificial immune algorithm	55
Optimal resource scheduling of multi-functional edge computing devices in digital distribution networks	55
Heat transfer mechanism in turbulent channel flow with V-tapered-baffles: Effect of convergence and divergence direction V-baffles	55
Evaluating the aircraft noise level and acoustic performance of the buildings in the vicinity of Dubai International Airport	53
Thermal and concentration analysis of two immiscible fluids flowing due to ciliary beating	52
Energy-Efficient circuits with improved diode free adiabatic logic design methodology	51
Mathematical modeling and characteristics of automotive electric power steering systems: A state–of–the–art literature review	51
A flexible novel extended lomax model for capturing complex patterns in engineering data sets	51
Research on the stress performance of lattice-type steel-tube-concrete ball-slab node four-limbed column wind turbine towers	51

Coping with skill shortage within the UK construction industry: Scaling up training and development systems	51
Ultrasonic characterization of expanded polystyrene used for shallow tunnels under seismic excitation	51
Editorial Board	51
A swin transformer-driven framework for gesture recognition to assist hearing impaired people by integrating deep learning with secretary bird optimization algorithm	50
Pipe failure prediction of wastewater network using genetic programming: Proposing three approaches	50
Stochastic resonant NLSE with cubic-quintic-septic-nonlocal nonlinearity: Soliton dynamics and noise-induced phenomena	50
Modified progressive iterative approximation techniques for interoperable conversion of QT-Bézier and rational Bézier curve	50
Horizontal-axis propeller hydrokinetic turbine optimization by using the response surface methodology: Performance effect of rake and skew angles	50
Editorial Board	49
Bifurcations of a three-species prey-predator system with scavenger	49
Optional and mandatory assignment strategies for dynamic vehicle routing with time windows	49
Numerical analysis for Cattaneo-Christov heat flux on convective viscous non-Newtonian fluid flow through porous medium with nonuniform heat source	48
Experimental study of an optical concentrated solar thermoelectric power generator	48
Paving a traceable green pathway towards sustainable construction: A fuzzy ISM-DEMATEL analysis of blockchain technology adoption barriers in construction waste management	48
Enhancing multi-agent system coordination: Fixed-time and event-triggered control mechanism for robust distributed consensus	48
Dynamic S-boxes generation for IoT security enhancement: A genetic algorithm approach	48
Traffic congestion patterns in the urban road network: (Dammam metropolitan area)	48
Nonlinear convective heat transfer in Maxwell nanofluids with quadratic thermal stratification over a Magnetized inclined Surface: Applications towards engineering Industry	47
Solitons behavior of Sasa-Satsuma equation in birefringent fibers with Kerr law nonlinearity using extended F-expansion method	47
A review on design alteration in microchannel heat sink for augmented thermohydraulic performance	46
Evaluation of Educational Strategies in the Design Process of Infrastructure for a Healthy Sustainable Housing Community	46
Optimal power flow in power systems with renewable energy resources uncertainty including geothermal power plants	46
A novel multi-criteria sorting method based on the linguistic polyhedral hesitant fuzzy consensus-reaching model	45
Multicomponent Stress-Strength Reliability estimation based on Unit Generalized Exponential Distribution	45
Resource assignment optimization in design firms	45
Mathematically modeling of Ge-Sb-Te superlattice to estimate the physico-chemical characteristics	45
Control of dynamic response of the functionally graded smart sandwich beam coupled variable Kelvin–Voigt–Pasternak's model	45
Reliable methodology for performance enhancement of hybrid photovoltaic-thermoelectric system via dynamic reconfiguration	44
OPBRP - obstacle prediction based routing protocol in VANETs	44
Integration of multiple decision-making methods with GIS for nuclear power plants siting in Bangka Belitung, Indonesia	44
Stability and Hopf bifurcation research of fractional-order B2B Supply Chain Finance model with time delays	44
Measuring construction safety performance in Chinese provinces through cross-efficiency theory	44
Extraction of solitons in magneto–optic waveguides for coupled NLSEs with Kudryashov's law of nonlinearity via modified extended direct algebraic method	44
Mathematical modelling for groundwater management for multilayers aquifers (Erbil basin)	44
Design and experimental implementation of skewed stator structured PM generator using Multi-Objective Genetic Algorithm for gearless direct driven wind system	44
An adaptive continuous sliding mode feedback linearization task space control for robot manipulators	44
Knowledge distillation and fine-tuning for corrosion and salt damage classification	44
Overcoming implementation barriers in 3D printing for gaining positive influence considering PEST environment	43
A mathematical model for radiative peristaltic flow of Jeffrey fluid in curved channel with Joule heating and different walls: Shooting technique analysis	43
Bridging prediction and optimization: A unified MINLP, traditional machine learning and deep learning framework for water distribution networks management	43
Structural stability analysis and deformation control of constraint-anchorage support system in soft rock mass tunnel	43
A multistage coupon incentive-based demand response in energy market	43
Urban spaces as a positive catalyst during pandemics: Assessing the community’s well-being by using artificial intelligence techniques	43
An innovative approach to check buildings insulation efficiency using thermal cameras	43
An AI-based badminton smash detection using residual-shuffle network optimized based on upgraded pufferfish optimizer	42
A method for denoising and reconstruction of EM leakage information based on optimized VMD joint singular spectrum analysis	42
Thermoelastic behavior of infinite porous media with voids subjected to instantaneous heat Sources: A Spatio-Temporal nonlocal and fractional heat transfer approach	42
Practice-oriented modelling of URM walls: experimental calibration of micro- and macro-mechanical approaches in OpenSees for reliable structural assessment	42
Three-dimensional laser scanning for structure documentation and construction management: A case study of renovation and rebuilt of metro tunnels	42
Deep reinforcement learning for energy maximization in AWS wave energy systems with supercapacitor storage unit	42
Improved prediction of geopolymer concrete compressive strength using metaheuristic-enhanced extreme learning models with combined SHAP and LIME for sustainable construction	41
Metaheuristics and multi-criteria decision-making for renewable energy systems: Review, progress, bibliometric analysis, and contribution to the sustainable development pillars	41
Urban form and theft distribution: bivariate geospatial modeling of street connectivity and land-use mix in neighborhoods of Erbil, Iraq	41
Machine and deep learning approaches for forecasting electricity price and energy load assessment on real datasets	41
Effect of sacrificial piles on local scour around complex bridge piers	40
Printed circularly polarized spilt ring resonator monopole antenna for energy harvesting	40
Experimental and numerical investigation on punching behavior of ultra-high performance concrete flat slabs	40
Barrier function-based adaptive synergetic control with state constraints for manipulator with uncertainty and input saturation	40
Degree, closeness and eigenvector for the construction of cryptographically secure S-boxes	40
Enhanced automated text categorization via Aquila optimizer with deep learning for Arabic news articles	39
CAD-IGMS: Cyber attack detection in an intelligent grid management system via the deep learning enhancing grid reliability	39
Chaotic slime mould optimization algorithm for optimal load-shedding in distribution system	38
Soil stiffness from back-analysis of pile load tests in Al Burrullus	38
The creation of a temperature-regulated greenhouse model for crop cultivation in Northeastern Thailand	38
Emotion-net: Automatic emotion recognition system using optimal feature selection-based hidden markov CNN model	38
An impact loading simulation of Rubber-Toughened Poly Methyl Methacrylate (RT-PMMA) using Abaqus Explicit	38
Design of an efficient thulium-doped fiber amplifier for dual-hop earth to satellite optical wireless links	38
EL-RFHC: Optimized ensemble learners using RFHC for intrusion attacks classification	38
Machine learning algorithm for mapping computational data of water reservoir with air bubble flow column reactor	38
Editorial Board	38
Quiescent optical solitons in magneto–optic waveguides having Kudryashov's quintuple power–law of self–phase modulation	37
Secure transmission enhancement in shotgun cellular systems using transmitter-side information over correlated shadowing channels	37
Development of mathematical model for the prediction of zinc removal from a wastewater in microbial fuel cell	37
Economic cost and efficiency analysis of the employment of inserting rods with helical fins in a shell and tube heat exchanger under magnetic field and filled with nanofluid	37
Computational modeling of a Fluid Catalytic Cracking Unit	36
Temporal variation of scour depth around bridge abutment in presence and absence of permeable spur dike under unsteady flow conditions	36
Exploration of 3D stagnation-point flow induced by nanofluid through a horizontal plane surface saturated in a porous medium with generalized slip effects	36
Performance of pre-cracked beams exposed to corrosion environment cast with ultra-high performance concrete	36
Wind power prediction using random vector functional link network with capuchin search algorithm	36
Energy, Exergy, Entropy, Emission Factors (4E’s) and Sustainability Index analyses of thermal splintering waste paraffin Oil, di-ethyl ether − diesel blends	36

A multi-criteria assessment of climate change impacts on urban sustainability in Dammam Metropolitan Area, Saudi Arabia	36
Corneal elevation topographic maps assessing different diseases detection: A review	36
Simulation-Based Study for Healing environment in intensive care units: enhancing daylight and access to view, optimizing an ICU room in temperate climate, the case study of Palestine.	36
Enhanced Detection of Diabetic Retinopathy using GAI-Net: Deep Learning Model based on GAN with Autoencoder	36
Study on the transient motion law of high-speed airflow in the vortex spinning process	36
Chebyshev collocation simulations for instability of Hartmann flow due to porous medium: A neutral stability and growth rate assessment	36
Review of artificial recharge prospects for augmentation of groundwater in Egypt: A case study of El Bustan extension area	35
Impacts of e-commerce on planning and designing commercial activities centers: A developed approach	35
Effectiveness analysis of twelve sectors of DTC based on a newly modified switching table implemented on a wind turbine DFIG system under variable wind velocity	35
Assessing dam spillway discharge capacity in response to extreme floods in Perak river hydroelectric scheme: Simulation and proposed mitigation measures	35
Analysis of the dynamical behaviors for the generalized Bogoyavlvensky–Konopelchenko equation and its analytical solutions occurring in mathematical physics	35
Spatiotemporal dynamics of a novel hybrid modified ABC fractional monkeypox virus involving environmental disturbance and their stability analysis	35
Time-cost-quality tradeoff considering resource-scheduling problems	35
Computational study of coupled Whitham Broer Kaup equations via interpolation technique	34
An investigation on construction companies’ attitudes towards importance and adoption of circular economy strategies	34
Modelling of enhanced predictive analytics and decision-making approach using recurrent autoencoder with attribute subset reduction for students’ academic performance	34
Fully signed quadrature space shift keying MIMO modulation	34
Development of new modified delay and queue length methods for urban signalized intersections: A case of Antalya city	34
Impacts of human resource management and knowledge management on non-financial organizational performance: Evidence of Thai infrastructure construction firms	34
Seismic safety evaluating method for High-Rise frame structures via advanced incremental dynamics analysis	34
Utilization of rice husk ash for sustainable synthesis of titania nanoparticles on ordered SBA-15 mesopores with high photoactivity and stability	34
Hybrid enhanced particle swarm optimization for VTOL UAV sliding mode controller: A methodological	34
Mechanism for generating and promoting manufacturing project portfolio synergy	34
Performance enhancing of porcelain insulators using low cost micro additives	34
Enhancing solar radiation prediction accuracy: A hybrid machine learning approach integrating response surface method and support vector regression	34
Convective-radiative thermal investigation of a porous dovetail fin using spectral collocation method	33
Deep-learning cell-delay modeling for static timing analysis	33
A Subjective Assessment for the Preconstruction Project Plans in Egypt	33
Transforming Cairo's downtown with tactical urbanism: Translating informal activities into formal enhancements for a thriving urban life	33
Editorial Board	33
Editorial Board	33
Editorial Board	33
Factors influencing buyers’ and investors’ decisions in acquiring property in hillside areas	32
Synergistic effect of carbon fiber, fly ash, and M-sand on the performance of Engineered Cementitious Composites (ECC)	32
Towards sustainable transboundary water cooperation between Afghanistan and Pakistan: A case study of Kabul River	32
Enhancing visual clarity in rainy conditions based on single-frame filtering algorithm	32
Bond-graph analysis and modelling of a metal detector as an example of electro-magnetic system	32
A robust control framework for multi-agent systems under Byzantine attacks using hybrid event-triggered techniques	32
The development of a generalized multilevel inverter for symmetrical and asymmetrical dc sources with a minimized ON state switch	32
An analytical examination of bright and dark kink solitons in Conformable Pochhammer-Chree equation arising in elastic medium	32
Theoretical and computational analysis of a novel fractional-order mathematical model for HIV transmission dynamics	32
Construction of features database using different platform navigation solutions for aiding PDR algorithm	31
Assessing the influence of Bacillus megaterium and Bacillus sphaericus in cementitious materials: Promoting sustainability towards strength, durability and crack repair	31
The role of climate change on hydroelectric energy from renewable energy sources: A case study of Sakarya Basin, Türkiye	31
Heat transfer analysis on ferrofluid natural convection system with magnetic field	31
User satisfaction assessment model through time: A case study in governmental buildings in Cairo, Egypt	31
The state-of-the-art knowledge, techniques, and simulation programs for quantifying human visual comfort in mosque buildings: A systematic review	31
An improved predictive current control for IM drives	31
A valent-based metric framework for analyzing intuitionistic fuzzy graphs in uncertain environments	31
GK-ANFIS: Gated and KAN-enhanced adaptive neuro-fuzzy inference system for robot path planning	31
Security risk assessment of internet of things health devices using DREAD and STRIDE models	30
New technologies for UAV navigation with real-time pattern recognition	30
Life cycle assessment and economic analysis of Reusable formwork materials considering the circular economy	30
Optimization of dual-stage controllers in renewable energy sources-based interconnected power systems through refinement of the African Vultures Optimization Algorithm	30
An assessment of barriers to digital transformation in circular Construction: An application of stakeholder theory	30
Leaching-induced alterations in the geotechnical and microstructural attributes of clayey gypseous soils	30
Bearing capacity of strip footing on top of slope: Numerical parametric study	30
Synthetic data generation using Copula model and driving behavior analysis	30
Comparison of thermal properties of Luffa-PCB and FR2 PCBs in power electronics circuit applications	30
Multilevel institutional analysis of BIM policy diffusion in China’s construction industry: a spatiotemporal perspective	30
A multi-area decentralized optimal power flow framework for smart grids with interconnected transmission networks	30
Advanced VO2-Graphene based compact THz absorber for EM shielding and biosensing applications	30
Impact of chimney divergence and sloped absorber on energy efficacy of a solar chimney power plant (SCPP)	30
Influence of photovoltaic cell technologies and elevated temperature on photovoltaic system performance	29
Factors impacting the implementation process of automated construction progress monitoring	29
An LMI adaptive-barrier function global sliding mode control of uncertain nonlinear systems with input saturation	29
Optimal control and controllability theorems for impulsive Hilfer fractional integro-differential inclusions with numerical applications	29
An optimized Deep and Active Learning oriented framework for intrusion detection in Internet of Sensor Things	29
Diabetic retinopathy grading using curvelet CNN with optimized SSO activations and wavelet-based image enhancement	29
Generalized existence results for solutions of nonlinear fractional differential equations with nonlocal boundary conditions	29
Knowledge graph-based recommendation system enhanced by neural collaborative filtering and knowledge graph embedding	29
Adsorption potential of CuO-embedded chitosan bead for the removal of acid blue 25 dye	28
A study on the monitoring of weld quality using XGBoost with Particle Swarm Optimization	28
Towards optimizing canal system operations: Extremum-seeking controller design via a frequency-based control approach	28
Feasibility study and performance analysis of external slotting of submersible motor stator	28
Effects of shearing processing on the quality and magnetic properties of electric steel sheet	28
Privacy-preserving authentication for 5G healthcare with HBZKP: Hierarchical blockchain-based zero knowledge proof for secure edge devices	28
Type-2 fuzzy ontology with Dendritic Neural Network based semantic feature extraction for web content classification	28
Scale and shear investigation of the viability and consequences of controlling viscous heating for Argon flows in nano-channels	28
Ultra-low SLL slotted waveguide antenna array using Chebyshev aperture distribution function for MM-wave tracking radar applications	28
Encrypted network traffic classification based on machine learning	28
Optimal allocation of renewable DGs using artificial hummingbird algorithm under uncertainty conditions	28
Analytical soliton solutions for cubic-quartic perturbations of the Lakshmanan-Porsezian-Daniel equation using the modified extended tanh function method	28
The impact of biophilic attributes on university students level of Satisfaction: Using virtual reality simulation	28
Prospects of biogas and evaluation of unseen livestock based resource potential as distributed generation in India	27
Leveraging artificial intelligence for minimizing environmental footprints in the mining industry	27
Prediction of compressive strength of recycled concrete using gradient boosting models	27
The potential of electric vehicles and road systems for sustainable development in the GCC and NC regions: Opportunities, challenges and requirements	27
Precision agriculture using a low-cost vertical take off and landing tailsitter: Design and performance analysis	27
Prediction of possible tornado strike using complex m-polar fuzzy information based on Dombi operators	27
A study on state dependent single server queue with Markov modulated arrival under hyper exponential service times using block matrix structured approach	27
Reliability calculations based on an enhanced transformer life expectancy model	27
A hybrid data envelopment analysis and artificial intelligence framework for sustainable supplier selection: a case study in the petrochemical industry	27
Bridging experimental work and environmental application: LCA-driven scalability of bagasse ash for eco-friendly stabilization of swelling clay subgrade	27
Groundwater potentiality delineation in Moghra, Egypt	27