Ain Shams Engineering Journal

Article	Citations
A comparative analysis of numerical methods applied to nonsimilar boundary layer-derived infinite series equations	326
A study of finding empirical correlation for the Nusselt number and the factors influencing it for perforated fin array of different shapes	210
Approximations to linear Klein–Gordon Equations using Haar wavelet	192
The compass: A sustainability rating system to diagnose informal areas in Egypt	157
Numerical investigation of branch plate-to-CHS connection under eccentric shear loading	153
Impact of lecture hall’s background noise on undergraduates’ higher order thinking skills: A field study	140
Multi mode coordinated control algorithm for DC near-field photovoltaic based on adaptive mutation particle swarm optimization	132
A digital audio data protection method using parametric action of generalised triangle group on GF(28)	115
The influence of spatial configuration on pedestrian movement behaviour in commercial streets of low-density cities	114
FTNet-HiLa: An adaptive multimodal histopathological image categorization network	108
Single-stage modified Vienna rectifier SEPIC AC-DC LED driver	107
Advancements in eco-friendly lead-free perovskite/Sb2Se3 tandem solar cells: TCAD simulations	92
Dos attack detection using fuzzy temporal deep long Short-Term memory algorithm in wireless sensor network	89
Investigating the potential of optical metamaterials with highly dispersive solitons in twin couplers with stochastic perturbations and white noise effects	86
A Tunable Hexa-Band SRR Metamaterial for Microwave Sensing Application	85
Analysis of pedestrian crossing violations at an overpass location by using a logit model	84
Enhancing Baghdad City’s reputation through city branding	81
Transformative nanofluid solutions: Elevating solar still performance for enhanced output	80
Improved heat conduction in hybrid nanofluid across a slippery rotating cylinder with solar radiation and Lorentz forces	78
Multi-Objective optimization in the construction of steel-concrete composite columns with carbon emission considerations: Pareto front development and decision-making	77
Stochastic optimization of level-dependent perishable inventory system by Jackson network	77
Thin wire and circular disk resonator MXene solar absorber optimized using Machine learning for renewable energy applications	77
An efficient GPU acceleration technique for CBCT based on memory aware optimization scheme	77
Editorial Board	74
Hexa-mobile net for NOMA Rayleigh fading channel estimator via Hexagonal pilot insertion	68

Thinned-out controlled IC MPPT algorithm for class E resonant inverter with PV system	68
The digital economy: Challenges and opportunities in the new era of technology and electronic communications	68
Residents’ responses about water-sensitive urban design: The case of greater Cairo region	65
Link adaptation and multi-objective resource optimization in intelligent wireless networks using power-domain non-orthogonal multiple access	65
Decision support system to select the optimum construction techniques for bridge piers	64
A hybrid fuzzy rule-based multi-criteria framework for sustainable-security assessment of web application	62
A way towards zero-waste campaign and sustainability in sugar industries; filter cake valorisation as energy pellets	62
Energy, exergy, sustainability and environmental emission analysis of coal-fired thermal power plant	62
Goal-oriented adaptive method for Fredholm partial integro-differential equations	61
Solar passive features in vernacular Gyalrong Tibetan houses: A quantitative investigation	61
Feasibility analysis of wind energy potential along the coastline of Pakistan	61
Cyber secure consensus of fractional order multi-agent systems with distributed delays: Defense strategy against denial-of-service attacks	60
A PEMFC model optimization using the enhanced bald eagle algorithm	60
Offloading computational tasks for MIMO-NOMA in mobile edge computing utilizing a hybrid Pufferfish and Osprey optimization algorithm	59
Implementation of various control methods for the efficient energy management in hybrid microgrid system	58
Economic production quantity models for an imperfect manufacturing system with strict inspection	58
Entropy measures of Y-junction based nanostructures	58
Usage of eggshell as potential bio-filler for arcylonitrile butadiene rubber (NBR) latex film for glove applications	58
Sandstone groundwater salinization modelling using physicochemical variables in Southern Saudi Arabia: Application of novel data intelligent algorithms	57
Active damping of LCL-Filtered Grid-Connected inverter based on parallel feedforward compensation strategy	56
On-line analysis of power quality problems in non-sinusoidal/non-linear distribution systems	56
Dynamic model for transmission lines maximum disconnection time on wind farm	55
Preventing electric shock accidents in workplaces	55
Identification of power PIN diode design parameters: Circuit and device-based simulation approach	55
New symbolic model for multi-compressor operation based on multi-objective Jaya optimization for life/energy saving	54
Revisiting ‘Sabil’ buildings as nuclei of sustainable urban mobility in Fatimid Cairo: An urban-touristic approach considering urban and environmental qualities	54
Application of adaptive neuro-fuzzy inference system in modelling home-based trip generation	53
Integration of multi-photos and laser scanner data to form a complete 3d model	53
Buoyancy driven flow and slippage constraints influences on Casson hybridity nanofluid of Yamada-Ota and Xue type via rotating cone	53
A Unified index of water resources systems vulnerability assessment – Translating the theoretical approach into a simple tool to assess climate change Impact: Case study in Limpopo River Basin, Africa	53
Housing challenges and programs to enhance access to affordable housing in the Kingdom of Saudi Arabia	53
A study of micro-scale solder bump geometric shapes using minimizing energy approach for different solder materials	52
An optimized chaotic S-box for real-time image encryption scheme based on 4-dimensional memristive hyperchaotic map	52
A low cost IoT-based Arabic license plate recognition model for smart parking systems	52
Maintenance priority towards the features and facilities in Malaysian public parks: Visitors’ perspective versus actual experience	51
Critical Success Factors Influencing Total Quality Management In Industrialised Building System: A Case Of Malaysian Construction Industry	51
Numerical investigation of heat and mass transfer study on MHD rotatory hybrid nanofluid flow over a stretching sheet with gyrotactic microorganisms	50
Robust control of adaptive power quality compensator in Multi-Microgrids for power quality enhancement using puzzle optimization algorithm	50
The major problems between main contractors and subcontractors in construction projects in Egypt	50
Experimental research on mechanism of scour by submerged jets in consolidated clay	49
Design of open drains by solving Richards equation and artificial neural networks	49
Mixed convection from two horizontally aligned hot and cold circular cylinders in a vented square enclosure	48
Editorial Board	48
Editorial Board	48
Editorial Board	47
Improvement of the DRAINMOD model's performance under time-variable surface storage capacities using neural network models	47
Historical-based bidding strategy in transactive energy market for household: Data driven analysis	47
Investigating current practices for achieving effective participation of stakeholders in Facilities Management	47
Discovering epistasis interactions in Alzheimer’s disease using integrated framework of ensemble learning and multifactor dimensionality reduction (MDR)	47
Nonlinear seismic analysis of irregular base isolated structures using a new modified lateral load pattern	47

Editorial Board	46
Torque ripples reduction of electric vehicle synchronous reluctance motor drive using the strong action controller	46
A 3-year observation on analyzing cloud-to-ground lightning in Peninsular Malaysia using graph theory	45
“Calculation of onset voltage of corona over a solid dielectric surface encasing rod-rod gap”	45
Investigating the effects of employing a cooling radiator on MHD natural convection by injecting MWCNTs into water	44
Performance enhancement of high degree Charlier polynomials using multithreaded algorithm	44
New multi-source DC-DC boost converter and its generalized structure with experimental validation	44
Developing Techno-economic GUI-based Software for On-grid, and Off-grid Photovoltaic Systems Sizing	44
Numerical analysis of sediment transport and depth averaged flow velocity in non-prismatic compound channels	44
Development of a quality-based irrigation water security index	44
A novel algorithm for generating Pareto frontier of bi-level multi-objective rough nonlinear programming problem	44
Personal Protective Equipment (PPE) usage in Construction Projects: A Systematic Review and Smart PLS Approach	43
Multi-objective planning for optimal exploitation of surface and groundwater resources through development of an optimized cropping pattern and artificial recharge system	43
Evaluating windcatchers in UAE heritage architecture: A pathway to zero-energy cooling solutions	43
Irreversibility analysis in natural bio-convective flow of Eyring-Powell nanofluid subject to activation energy and gyrotactic microorganisms	43
Thermal conductivity performance in hybrid (SWCNTs-CuO/Ehylene glycol) nanofluid flow: Dual solutions	42
Multifunctional crosslinked chitosan/nitrogen-doped graphene quantum dot for wastewater treatment	42
Experimental investigation of the rheological properties of water base mud with silica nanoparticles for deep well application	42
New capital cities as tools of development and nation-building: Review of Astana and Egypt’s new administrative capital city	42
Assessment of Coastal Revetment: Case study of Rosetta Revetment	42
Flow in a channel of porous parallel and inclined walls: Carreau fluid of variable density	42
Three-dimensional numerical study for determining the optimum diversion angle of bifurcating channels	41
Fuzzy-fractional modeling of Korteweg-de Vries equations in Gaussian-Caputo sense: New solutions via extended He-Mahgoub algorithm	41
Performance enhancement and power management strategy of an autonomous hybrid fuel cell/wind power system based on adaptive neuro fuzzy inference system	41
Natural convection flow of a nanofluid-filled V-shaped cavity saturated with a heterogeneous porous medium: Incompressible smoothed particle hydrodynamics analysis	41
Ten non-polynomial cubic splines for some classes of Fredholm integral equations	40
Development of a novel model to estimate the separation of organic compounds via porous membranes through artificial intelligence technique	40
Estimation of the physiochemical characteristics of an antibiotic drug using M-polynomial indices	40
Advanced fixed point techniques for solving fractional p−Laplacian boundary value problems with impulsive effects	39
Editorial Board	39
The effect of seating elements in accordance with the for social distance on the shopping mall preferences of customers in the post-pandemic process	39
Enhancing virtual indoor environment and energy efficiency with real-time BIM and Unreal Engine integration in building lighting design	39
An enhanced deep learning model based on smoothed pseudo Wigner-Ville distribution technique for emotion recognition with channel selection	39
Power quality enhancement of unbalanced Distributed-Resources based on triple-loop compensation	39
Leverage of Coriolis-force on Maxwell-fluid flow past an inclined stretching plate	38
Cost optimization of sewage pipelines inspection	38
Fusion of Dual-Scale Convolution Neural Network for Urban Building Footprints	38
New calibration estimation procedure in the presence of unit non response	38
A study of the relationship between contemporary memorial landscape and user perception	38
Experimental assessment for non-monolithic slab-column connections	38
Effect of web stiffeners on the lateral distortional buckling of channel section with hollow flanges	38
Design and optimization of nonlinear component of block cipher: Applications to multimedia security	38
Developing a user plug-in to assess delay causes’ impact on construction projects in Egypt	37
Mitigation of dust on PV panels that operate light posts using a wind shield, mechanical vibrations and AN antistatic coating	37
Editorial Board	37
Evaluation of the online teaching of architectural design and basic design courses case study: College of Architecture at JUST, Jordan	37
Flow circulation dynamics in spur dike field enhanced by roughness elements	37
Study of enabling factors affecting the adoption of ICT in the Indian built environment sector	37
Development of a novel wireless telemetric brain stimulator for behavioral studies in rodents	37
Optimizing mix proportions of blended cement composites through rheological and strength relations: A numerical modelling approach with curve fitting	36
A p-center mobile hub location in a dynamic environment with capacity constraints and multiple allocation	36
Sustainable cities and urban dynamics: The role of the café culture in transforming the public realm	36
Incorporating stochasticity in demands for optimizing resource allocation in versatile edge systems devoid of layer constraints	36
Investigation of fluidic oscillator performance improvements by modifying interior chamber with a backward facing step geometry	35
Data-driven optimal adaptive MPPT techniques for grid-connected photovoltaic systems	35
A mm-Wave On-Off-Keying radio transmitter with 10 GHz bandwidth employing 130 nm CMOS	35
Centralized event-based protection based on communication infrastructure of medium voltage direct current network	35
RETRACTED: An improved equalization technique for fast charging of Electric vehicles	35
Breast cancer diagnosis model using stacked autoencoder with particle swarm optimization	35
Improvement of active distribution systems with high penetration capacities of shunt reactive compensators and distributed generators using Bald Eagle Search	34
Evaluation of success factors of utilizing AI in digital transformation of health and safety management systems in modern construction projects	34
Quantitative granitic weathering assessment for rock mass classification optimization of tunnel face using image analysis technique	34
Optimal reconfiguration for Extra high voltage transmission networks using an enhanced Brute-Force algorithm	34
Biofilm formation monitoring using SEM in synthetic wastewater pollutant removal by combination of DAF and modified MBBR	34
Hydrolysis reaction utilizing cavitation from high pressure water jet impinging into palm oil bath	34
Energy performance in residential buildings: Evaluation of the potential of building design and environmental parameter	33
N-Co-Cd-doped TiO2 nanocomposite for efficient dye-synthesized solar cells	33
Derived and optimized mathematical model to estimate the rate constants of adsorption, desorptionand sulphur content based on physical properties of diesel using bio waste of coconut	33
Establishment of material flow analysis (MFA) for heavy metals in a wastewater system	33
Key factors for implementation of total quality management in construction Sector: A system dynamics approach	33
Using oxy-hydrogen gas to enhance efficacy and reduce emissions of diesel engine	33
Experimental study on the effect of using phase change materials to prevent of increasing the temperature of the interfacial between the hand and the computer mouse	33
A new wireless charging system for electric vehicles using two receiver coils	33
Securing Android IoT devices with GuardDroid transparent and lightweight malware detection	33
Effect of type, amount and configuration of reinforcement in HSC box-girders reinforced with BFRP bars and steel stirrups under torsion-shear-bending	33
Design and Analysis of a Novel Generalized Continuous Tracking Differentiator	33
Improved predictive direct power control of shunt active power filter using GWO and ALO – Simulation and experimental study	33
Electric and magnetic comparison of two 10-phase autotransformers	32
Exploration of challenges to deployment of blockchain in small construction projects	32
A study of optimal design process for complex-shaped skyscrapers’ structural systems in United Arab Emirates	32

Modeling of bond stress-slip relationships of mono-prestressing strands with H-anchorage dead end	32
Impact of loading capability on optimal location of renewable energy systems distribution networks	32
Alleviation of the transients induced in large photovoltaic power plants by direct lightning stroke	32
Effect of temperature and water conditioning on noise and skid resistance of dense-graded, open-graded and gap-graded asphalt mixes	32
Performance of a dual service station in stochastic inventory system with multi server and optional feedback service	32
Solving systems of conformable linear differential equations via the conformable exponential matrix	31
Stimulating architects’ mental imagery reaching innovation: Lessons from urban history in using analogies and metaphors	31
Fire prevention and mitigation technologies in high-rise buildings: A bibliometric analysis from 2010 to 2023	31
The impact of flow reduction on the river morphology during bridge rehabilitation	31
Enhancing the integration of the GPS/INS during GPS outage using LWT-IncRGRU	31
Modified teaching learning based optimization for selective harmonic elimination in multilevel inverters	31
Common architectural characteristics of traditional courtyard houses in Erbil city	31
Unveiling robust security: Chaotic maps for frequency hopping implementation in FPGA	31
Fault current limitation approaches for grid-following controlled DERs in microgrid environments	31
An investigation on fuzzy optimal cut vertices and fuzzy optimal cut edges with their applications	31
Contribution of analysis and detection the risks appearing in roads using GPR method: A case study in Morocco	31
Normalized signature graph of analog circuits for fault classification using digital testing	30
Daylighting and energy consumption in museums and bridging the gap by multi-objective optimization	30
A comparative study on thermal performance of a 3-D model based solar photovoltaic panel through finite element analysis	30
Navigating cardiovascular dynamics through mathematical modeling of arterial blood flow	30
Analyzing the effectiveness of building integrated Photovoltaics (BIPV) to reduce the energy consumption in Dubai	30
Pre-HLSA: Predicting home location for Twitter users based on sentimental analysis	29
Study the Effect of Food Waste on Egypt Water Resources - wheat case study	29
3D nanofluid flow over exponentially expanding surface of Oldroyd-B fluid	29
Offering a channel for cooling three lithium-ion battery packs with water/Cu nanofluid: An exergoeconomic analysis	29
Landfill leachate: Sources, nature, organic composition, and treatment: An environmental overview	29
Free and forced vibration analyses of unsymmetrical functionally graded porous folded sandwich plates using MITC3 elements	29
Computational analysis and chaos control of the fractional order syphilis disease model through modeling	29
Determination of critical aquifer subsidence points by DFFITS-COOK distance method using Importance sampling reliability analysis	29
Probabilistic assessment of seismic response of toe-excavated hillslopes retained using anchored sheet-pile-wall	28
Determination of the filler concentration of the composite material to reduce the wear of the central bowl of the rail truck bolster	28
Denoising of partial discharges in switchgear insulation material using hybrid wavelet denoising-optimization-machine learning	28
An analysis of residents’ satisfaction with attributes of urban parks in Dammam city, Saudi Arabia	28
Seismic vulnerability assessment of RC buildings with setback irregularity	28
Urban Chaos: A descriptive study of functional overlap using the city of Babylon (Medhatiya) as a model	28
Spatial morphological characteristics of traditional settlements: A comparative study along the Miaojiang Border Wall and Miaojiang Corridor in Hunan, China	28
The research about application of quasi-zero stiffness vibration isolation technology in a large vehicle-mounted optic-electronic equipment	28
Research on the lubricated characteristics of journal bearing based on finite element method and mixed method	28
Research on multi-UUV mission planning for mine countermeasures based on preferred multi-objective optimization	28
Molecular descriptors of symmetrically configured carbon nanocones via quotient graph technique	28
Optimal Artificial Intelligence Technique for LVRT Capability Improvement of a Grid-tied Wind Energy Conversion System: A MGOANFIS-PI Methodology	27
Optimizing solar vehicle performance in urban shading conditions with enhanced control strategies	27
Analysis of Monte-Carlo collision method with argon and helium background gases at different RF-powers and pressures in ELTRAP device	27
Experimental study on reducing water hammer effects in uPVC pipes using rubber bypass tubes	27
Corrosion detection and severity level prediction using acoustic emission and machine learning based approach	27
Modeling the effect of central impervious core and downstream filter geometry on seepage through earth dams	27
Does design-build concept improve problem-solving skills? An analysis of first-year engineering students	27
Numerical investigation of piezoelectric energy harvesting from a multi-mode T-shaped structure	27
Uncertainty quantification of the flexural strengthening of RC beams with UHPC using improved metaheuristic algorithm	27
Hybrid system for iron and manganese reduction from polluted water using adsorption and filtration	27
Selective crushing, enrichment by friction properties and hydrophobization for obtaining the sustainable blast furnace slag aggregate for road subbase	27
Propagation of damped SH waves on nonhomogeneous elastic composites involving viscoelasticity, generalized interface, rotation and mechanical loading	27
Exploring multi-soliton patterns, bifurcation analysis, and chaos in (2+1) dimensions: A study on nonlinear dynamics	27
Advanced quantitative analysis of nitrogen oxides and ozone: Integrating model reduction techniques with Deviation-Closeness Analysis	27
Thermodynamic analysis of micropolar-casson fluid flow with PST and PHF heating condition over a curved stretching surface	27
An Improved digital multi-resonant controller for 3 ϕ grid-tied and standalone PV system under bal	26
Study on spatial distribution and connectivity of Tusi sites based on quantitative analysis	26
Exploration of lump, interactions and rogue wave solutions to the (2 + 1)-dimensional evolution equation with bifurcation, sensitivity and stability analysis	26
Ameliorating frequency regulation based on double stage FOPI-(1 + TDN) for hybrid maritime microgrid system	26
Quantitative structure property relationship study of postpartum depression medications using topological indices and regression models	26
An empirical study on the formation mechanism of trust between the owner and the PMC contractor under the PMC model	26
Mean ranked acceptance sampling plan under exponential distribution	25
Performance Measurement of Operation and Maintenance for Infrastructure Mega-Project Based on Entropy Method and D-S Evidence Theory	25
Research on innovative teaching to enhance the employability of college students based on the “five Links and Six steps” method	25
Optimization-Driven design of a 2-bit coding based metasurface absorber for enhanced EMI shielding and RCS reduction	25
The effectiveness of helical strakes in suppressing vortex-induced vibration of tandem circular cylinders	25
A novel application of integrated grasshopper optimization heuristics for attenuation of noise interferences	25
Design of optimized flatness based active disturbance rejection controller for communication time delayed hybrid microgrid	25
Compact linearly polarized 5G Vivaldi non-uniform slot filtering antenna	25
Synopsis on Arabic speech recognition	25
Multi-objective optimization of parameters of slurry shield slag agitating and discharging system	25
Impact of uncertainties in wind and solar energy to the optimal operation of DG based on MCS	24
A hybrid approach for non-linear fractional Newell-Whitehead-Segel model	24
Compact 1- and 2-bit coding metamaterial for RCS reduction application in terahertz frequency	24
Characterization of sulfate-driven deterioration through the microstructural and nanomechanical characteristics of the components of cement paste	24
Assessment of morphological changes of river bank erosion using landsat satellite time-series images	24
Assessing and improving the sanitation services in Kabarto 2 IDP camp using the Smart sanitation approach	24
Assessment of modern irrigation versus flood irrigation on groundwater potentiality in old clayey lands	24
Optimization of thermal performance in hybrid nanofluids for parabolic trough solar collectors using Adams–Bashforth–Moulton method	24
Elastic deformation impact on trihybrid nanofluid flow through different geometries with the combine effects of electrophoresis and thermophoresis	24
Determination of nanoparticle solubility through green nanonization process using machine learning approach: Computational modeling and optimization	24
Effect of tsunami load induced by earthquake at Manila Trench on transmission tower	24
Reducing neural network complexity via optimization algorithms for fault diagnosis in renewable energy systems	24
The unsteady diffusive mass transfer in doubly connected region bounded by concentric ellipse	24
Evaluation of distillate quality produced by using a hybrid solar desalination system	24
Discrimination of high impedance fault in microgrid power network using semi-supervised machine learning algorithm	24
Effects of independent wheels steering system on vehicle cornering performance and road safety of the smart cities	23
The simplified equipment selection method for the cove lighting	23
Marine predators optimization and ANFIS as an effective tools for maximization of specific capacity of G-NiO electrode for electrochemical energy storage	23
Investigation of biomass powder as a direct solid biofuel in combustion engines: Modelling assessment and comparisons	23
FEM treatments for MHD radiative convective flow of MWCNTs C2H6O2 nanofluids between inclined hexagonal/hexagonal or hexagonal/cylinder	23
Determination of rheological properties of bio-asphalt binders through experimental and multilayer feed-forward neural network methods	23
Speed control and torque ripple minimization of SRM using local unimodal sampling and spotted hyena algorithms based cascaded PID controller	22
A novel computational investigation for EMHD gold nanofluids in an asymmetric inclined ciliated microchannel	22
Application of ISO 26000 in digital education during COVID-19	22