Frontiers of Structural and Civil Engineering

Article	Citations
Shape and topology optimization of plane frames via quantile-based sequential optimization and reliability assessment with global stability constraint	67
Seismic performance of fabricated continuous girder bridge with grouting sleeve-prestressed tendon composite connections	61
Axisymmetric loading on nanoscale multilayered media	59
Crack detection for wading-concrete structures using water irrigation and electric heating	38
Prediction of vertical displacement for a buried pipeline subjected to normal fault using a hybrid FEM-ANN approach	35
Effects of time-varying liquid bridge forces on rheological properties, and resulting extrudability and constructability of three-dimensional printing mortar	34
Ductility improvement of GFRP-RC beams using precast confined concrete block in compression zone	33
Research progress and challenges of energy diaphragm wall	28
Effective pavement temperature determination for improved falling weight deflectometer deflection correction in full-depth asphalt pavements	27
Experimental investigation of evolutive mode-I and mode-II fracture behavior of fiber-reinforced cemented paste backfill: Effect of curing temperature and curing time	27
Investigation of notch effect in the optimum weight design of steel truss towers via Particle Swarm Optimization and Firefly Algorithm	27
Stability of three-dimensional printable foam concrete as function of surfactant characteristics	26
Intensive construction technology for urban underground parking shaft	25
Estimation of the axial capacity of high-strength concrete-filled steel tube columns using artificial neural network, random forest, and extreme gradient boosting approaches	25
Responses of a short column-supported highrise tower to adjacent deep excavations in water-rich sandy strata and dynamic optimization of protection plans	25
Experimental and numerical investigation of the assembled monolithic spherical-shaped reinforced concrete ribbed folded plate structure	24
Estimating flexural strength of precast deck joints using Monte Carlo Model Averaging of non-fine-tuned machine learning models	24
An artificial neural network based deep collocation method for the solution of transient linear and nonlinear partial differential equations	24
Analytical algorithms of compressive bending capacity of bolted circumferential joint in metro shield tunnels	23
Analytical study on the mechanical behavior of longitudinal joints in shield tunnel strengthened by a steel ultrahigh performance concrete composite	23
Safety assessment for buried drainage box culvert under influence of underground connected aisle blasting: A case study	22
An ultra-thin bolt tension sensor and online monitoring system: For application in hydropower plant unit	22
Experimental and numerical evaluation of multi-directional compressive and flexure behavior of three-dimensional printed concrete	22
Research on mechanical performance of longitudinal joints in segmental tunnel linings strengthened by fiber-reinforced plastic grid with polymer-cement-mortar method	22
Explicit Peck formula applied to ground displacement based on an elastic analytical solution for a shallow tunnel	21

Design of computer vision assisted machine learning based controller for the Stewart platform to track spatial objects	21
An end-to-end 3d seismic simulation of underground structures due to point dislocation source by using an FK-FEM hybrid approach	20
Development and road performance of clear asphalt with high transparency and adhesion	19
Hierarchical model updating for high-speed maglev vehicle/guideway coupled system based on multi-objective optimization	19
Predicting shear strength of slender beams without reinforcement using hybrid gradient boosting trees and optimization algorithms	19
Laboratory investigation of emulsified asphalt binder modified with wood-derived nano-cellulose and nano paper-cellulose	18
Exploration on electrical resistance tomography in characterizing the slurry spatial distribution in cemented granular materials	18
A data-based inverse problem-solving method for predicting structural orderings	17
Cyclic behavior of slender and mid-rise resilient recycled aggregate concrete walls: Experiment and theoretical analysis	17
Prediction of falling weight deflectometer parameters using hybrid model of genetic algorithm and adaptive neuro-fuzzy inference system	17
Experimental study on the mechanical performance of unilaterally cracked tunnel lining strengthened with fiber reinforced plastics	17
Performance-based seismic assessment of a historical masonry arch bridge: Effect of pulse-like excitations	17
The development of ultralightweight expanded perlite-based thermal insulation panel using alkali activator solution	16
The influence of phase change material filled three-dimensional printed artificial aggregates on the properties of blast furnace slag based alkali-activated concrete	16
Flexural behavior of textile reinforced mortar-autoclaved lightweight aerated concrete composite panels	16
Aging properties and aging mechanism of activated waste rubber powder modified asphalt binder based on rheological properties and micro-characterization	15
Compressive and cyclic flexural response of double-hooked-end steel fiber reinforced concrete	15
A surrogate model for uncertainty quantification and global sensitivity analysis of nonlinear large-scale dome structures	15
Numerical simulation of three dimensional concrete printing based on a unified fluid and solid mechanics formulation	15
Influence of freeze–thaw damage gradient on stress–strain relationship of stressed concrete	15
Concrete strength and durability prediction through deep learning and artificial neural networks	15
Optimization design of anti-seismic engineering measures for intake tower based on non-dominated sorting genetic algorithm-II	15
Flexural and longitudinal shear performance of precast lightweight steel–ultra-high performance concrete composite beam	15
Research on concrete structure defect repair based on three-dimensional printing	15
Hybrid support vector regression approaches for modeling punching shear strength of reinforced concrete flat plates	15
A 3D sliced-soil–beam model for settlement prediction of tunnelling using the pipe roofing method in soft ground	14
Behaviour of self-centring shear walls—A state of the art review	14
Modeling the mechanical behavior and damage development of concrete materials under neutron irradiation	14
Reliability analysis of excavated slopes in undrained clay	14
Sustainable antibacterial performance in cementitious systems using Ag-modified TiO2 compounds	14
Uncertainty of concrete strength in shear and flexural behavior of beams using lattice modeling	14
Automated regression workflow for interpretable deflection prediction in bio-inspired laminated composite plates	14
Layout optimization of steel reinforcement in concrete structure using a truss-continuum model	14
Numerical simulation of rime ice accretion on a three-dimensional wind turbine blade using a Lagrangian approach	14
Effect of size on biaxial flexural strength for cement-based materials by using a triangular plate method	13
Geometric quality evaluation of three-dimensional printable concrete using computational fluid dynamics	13
Influence of surface cracking, anchor head profile, and anchor head size on cast-in headed anchors in geopolymer concrete	12
Extension of the average strain energy density method for crack initiation prediction in functionally graded materials and identification of a toughening mechanism	12
Discontinuous mechanical behaviors of existing shield tunnel with stiffness reduction at longitudinal joints	12
Optimization of machine learning models for predicting the compressive strength of fiber-reinforced self-compacting concrete	12
Proposing a development framework for sustainable architecture, engineering, and construction industry in China: Challenges, best practice, and future directions	12
Bridging finite element and deep learning: High-resolution stress distribution prediction in structural components	12
Effects of microfine aggregate in manufactured sand on bleeding and plastic shrinkage cracking of concrete	11
Investigation on identification of structural anomalies from polluted data sets using an unsupervised learning method	11
An efficient improved Gradient Boosting for strain prediction in Near-Surface Mounted fiber-reinforced polymer strengthened reinforced concrete beam	11
Numerical modeling of current-induced scour around multi-wall foundation using large-eddy simulation	11
Electromechanical admittance-based automatic damage assessment in plate structures via one-dimensional CNN-based deep learning models	11
Application of machine learning technique for predicting and evaluating chloride ingress in concrete	11
Numerical analysis on seismic response and failure mechanism of articulated pile–structure system in a liquefiable site from shaking-table experiments	11
Effects of green roof damping and configuration on structural seismic response	10

Drainage design combining drain holes and pinholes for tunnel boring machine segments subject to high water pressure	10
Acoustic emissions evaluation of the dynamic splitting tensile properties of steel fiber reinforced concrete under freeze–thaw cycling	10
Stable expression and control parameters in the numerical simulation of unsaturated flow	10
A state-of-the-art review of the development of self-healing concrete for resilient infrastructure	10
Properties and printability evaluation of three-dimensional printing magnesium oxychloride cement by fully utilizing aeolian sand	10
Development of combined transitional pavement structure for urban tram track-road grade crossings	10
Construction technology for deep tunnels crossing superhigh-temperature fault zones with high water surges	10
Effects of X-shaped energy dissipating steel dampers on the seismic response of high-speed railway track-bridge systems considering costs	10
Mechanical behavior and permeability properties of sustainable and high-performance anisotropic three-dimensional printable concrete	10
Parametric study on seismic performance of self-centering reinforced concrete column with bottom-placed rubber layer	10
Assessment and prediction of the mechanical properties of ternary geopolymer concrete	10
Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated with custom-designed mortar and fabrics	10
Simplified seismic scenario analysis of existing masonry buildings accounting for local site effects	10
Frost heaving behavior and mechanical deterioration of prestressed concrete	10
An extended numerical model of the first exothermic peak for three dimensional printed cement-based materials	10
Mixed mode (I/II) fracture of Glass/PA6 thermoplastic composites based on hybrid distance and correlation-based multiple target tracking methods	10
Mechanical behavior of NiTi shape memory alloy under cyclic loading: A state-of-the-art review	10
Structural optimization of filament wound composite pipes	9
Optimization of the mechanical performance and damage failure characteristics of laminated composites based on fiber orientation	9
A multi-objective design method for seismic retrofitting of existing reinforced concrete frames using pin-supported rocking walls	9
Proposing two new methods to decrease lateral-torsional buckling in reduced beam section connections	9
Manifold-based mass lumping addressing the inertia representation for rotational/torsional degrees of freedom in Kirchhoff plate vibration analysis	9
A new ecological underground group tank with inner steel plate lining for edible oil: Full-scale test and numerical simulation	9
Comparative analysis of twelve transfer learning models for the prediction and crack detection in concrete dams, based on borehole images	9
A theoretical model for investigating shear lag in composite cable-stayed bridges	9
Determination of the strength and elastic modulus of basalt based on point load test	9
Shear behavior of reinforced concrete beams strengthened utilizing optimized external post-tensioning techniques	9
Artificial intelligence-driven predictive modeling of multi-functional carbon nanotube infused smart cement for structural reinforcement and real-time damage sensing	9
Correction to: Effect of undercut on the lower bound stability of vertical rock escarpment using finite element and power cone programming	9
Hysteretic behavior of cambered surface steel tube damper: Theoretical and experimental research	9
Undrained seismic bearing capacity of strip footing adjacent to a heterogeneous excavation	9
Acoustic emission characteristics of damage evolution of multi-scale fiber reinforced rubberized concrete under uniaxial compression and tension after being subjected to high temperatures	9
Numerical analysis of bearing behaviors of single batter piles under horizontal loads in various directions	9
Prediction of characteristic blast-induced vibration frequency during underground excavation by using wavelet transform	9
Structural build-up model for three-dimensional concrete printing based on kinetics theory	9
Parametric modeling and interpretable machine learning prediction on load-carrying capacity of a circular hollow section X-joint	8
A frequency error estimation for isogeometric analysis of Kirchhoff–Love cylindrical shells	8
Evaluating the usability of recycled aggregates as fill materials depending on the composition and strength of their grains	8
Explainable machine learning and application-oriented tool for predicting effective hoop strain of fiber-reinforced polymer-confined concrete	8
Longitudinal shaking of culvert-frame combined underground structure	8
Influence of secondary lining reinforcement on the mechanical properties of double-layer lining in shield tunnels	8
Model testing of tripod caisson foundations in silty clay subjected to eccentric lateral loads	8
Laboratory evaluation of high-friction thin overlays for pavement preservation	8
Shaking table test on a tunnel-group metro station in rock site under harmonic excitation	8
Experimental study on the stratum applicability and mechanisms of bubble-slurry for earth pressure balance shields	8
Comparative study on data-driven prediction of overconsolidation ratio using supervised machine learning models	7
Calculation method for the formation time of dynamic filter cake in slurry shield tunneling	7
Cohesive zone model-based analyses of localized leakage of segmentally lined tunnels	7
Multifield vibration analysis of a porosity-tailored bidirectional functionally graded piezoelectric nano-plate on variable elastic foundations under hygro-thermoelectric effects	7
Development of an automatic and knowledge-infused framework for structural health monitoring based on prompt engineering	7
Development of design charts to predict the dynamic response of pile supported machine foundations	7
Improved prediction of pile bending moment and deflection due to adjacent braced excavation	7
Prediction of longitudinal surface settlement in composite formation using large-diameter shield machine based on machine learning techniques	7
Microbial-inspired self-healing of concrete cracks by sodium silicate-coated recycled concrete aggregates served as bacterial carrier	7
Thermal response of steel framing members in open car park fires	7
Seismic performance of HWBBF considering different design methods and structural heights	7
Full-scale site evaluation of ventilation expressway embankments underlain by warm permafrost along the Gonghe–Yushu Expressway	7
Do civil engineering fronts emerge from interdisciplinary research?	7
Comprehensive experimental database and analysis of circular concrete-filled double-skin tube stub columns: A review	7
Out-of-plane elastic buckling load and strength design of space truss arch with a rectangular section	7
Experimental study on shrinkage and creep of prestressed simply supported box girder for high-speed railway	7
2.5-dimension soil seismic response to oblique incident waves based on exact free-field solution	6
Optimal design of double-layer barrel vaults using genetic and pattern search algorithms and optimized neural network as surrogate model	6
Application of extreme gradient boosting in predicting the viscoelastic characteristics of graphene oxide modified asphalt at medium and high temperatures	6
Multi-population particle swarm optimization algorithm for automatic design of steel frames	6
Thermo-mechanical simulation of frost heave in saturated soils	6
Numerical modeling of external light gauge steel framed wall systems exposed to bushfire flame zone conditions	6
Soil seismic analysis for 2D oblique incident waves using exact free-field responses by frequency-based finite/infinite element method	6
Performance of a deep top-down zoned pit-in-pit excavation close to existing metro lines through winter	6
Probabilistic stability of uncertain composite plates and stochastic irregularity in their buckling mode shapes: A semi-analytical non-intrusive approach	6
Mechanical properties of concrete with Portland cement blended with fly ash, silica fume, and a large quantity of pre-treated cattle bone ash	6
Compressive behavior of recycled aggregate concrete with different stirrup confinements subjected to axial loading after freeze–thaw cycles	6
Effect of cutterhead configuration on tunnel face stability during shield machine maintenance outages	6
Effect of undercut on the lower bound stability of vertical rock escarpment using finite element and power cone programming	6
Investigation of the working mechanism of a quasi-floating hierarchically sacrificial seismic system for small and mid-span girder bridges	6
Deep reinforcement learning-based critical element identification and demolition planning of frame structures	6
Loosening earth pressure above shallow trapdoor in unsaturated soil with different groundwater level	6
Confinement properties of circular concrete columns wrapped with prefabricated textile-reinforced fine concrete shells	6
Printability and hardening performance of three-dimensionally-printed geopolymer based on lunar regolith simulant for automated construction of lunar infrastructure	6
Effect of a large-scale three-dimensional sedimentary basin on Rayleigh wave propagation by using spectral element method combined with frequency-wavenumber method	6

Calibration method of mesoscopic parameter in sandy cobble soil triaxial test based on PFC3D	6
Predicting the strength of fiber reinforced polymer materials externally bonded to masonry using artificial intelligent techniques	6
Data proportionality and its impact on machine learning predictions of ground granulated blast furnace slag concrete strength	6
A novel finite element formulation for static bending analysis of functionally graded porous sandwich plates	6
Fatigue evaluation of steel-concrete composite deck in steel truss bridge—A case study	6
Seismic responses of an intensively constructed metro station-passageway-shaft structure system	6
Vibration-based crack prediction on a beam model using hybrid butterfly optimization algorithm with artificial neural network	6
Microcapsule-enabled self-healing concrete: A bibliometric analysis	6
Multiscale analysis-based peridynamic simulation of fracture in porous media	6
Experimental and numerical investigation on horizontal bearing behaviors of caisson-type diaphragm wall with variable cross-sections	6
Experimental investigation of the effect of ground surcharge on the structural behavior of a quasi-rectangular tunnel	6
Machine learning based models for predicting compressive strength of geopolymer concrete	5
Shape optimization of aluminium alloy spherical reticulated shells considering nonlinearities	5
Tensile strength behavior of cement-stabilized dredged sediment reinforced by polypropylene fiber	5
Dynamic response of precast segmental bridge columns under heavy truck impact	5
Evaluation of the stability of terraced slopes in clayey gravel soil using a novel numerical technique	5
Improving the structural efficiency of textured three-dimensional concrete printing wall by architectural design	5
Effective static wind-induced force estimation for clips between purlins and metal panels of standing-seam metal roofing system	5
Multi-harmonic forced vibration and resonance of simple beams to moving vehicles	5
A novel social network search and LightGBM framework for accurate prediction of blast-induced peak particle velocity	5
Slender reinforced concrete shear walls with high-strength concrete boundary elements	5
Bibliographic survey and comprehensive review on mechanical and durability properties of microorganism based self-healing concrete	5
Interpretable machine learning model for forecasting compressive strength of aeolian sand concrete	5
Connection of the prefabricated updeck of road tunnels by a short lap-spliced joint using ultra-high-performance fiber-reinforced concrete	5
Displacement and force analyses of piles in the pile-caisson composite structure under eccentric inclined loading considering different stratum features	5
Effect of fineness of ash on pozzolanic properties and acid resistance of sugarcane bagasse ash replaced cement mortars	5
Application of conductive hydrogel reinforced by cellulose nanocrystals in monitoring crack process of concrete structure	5
Laboratory and field tests on soil conditioning for earth pressure balance shield tunneling in composite strata with different sand-rock ratios	5
Damage assessment and diagnosis of hydraulic concrete structures using optimization-based machine learning technology	5
Hard-rock tunnel lithology identification using multi-scale dilated convolutional attention network based on tunnel face images	5
A novel tunnel waterproof-drainage system based on double-bonded waterproofing materials and its seepage characteristics	5
Deformation evolution characterization of shallow-buried asymmetrically loaded twin-arch tunnels under long-term rainfall	5
Clogging of slurry-shield tunnel-boring machine drives in sedimentary soft rock: A case study	5
Parametric investigation on the novel and cost-effective nano fly ash impregnated geopolymer system for sustainable construction	4
Experimental and analytical investigation on friction resistance force between buried coated pressurized steel pipes and soil	4
Aerodynamic stability evolution tendency of suspension bridges with spans from 1000 to 5000 m	4
Experimental investigation on concrete overlaid with textile reinforced mortar: Influences of mix, temperature, and chemical exposure	4
Surrounding rock classification from onsite images with deep transfer learning based on EfficientNet	4
Assessment of fracture process in forta and polypropylene fiber-reinforced concrete using experimental analysis and digital image correlation	4
Development of deep neural network model to predict the compressive strength of FRCM confined columns	4
Compressive strength prediction and optimization design of sustainable concrete based on squirrel search algorithm-extreme gradient boosting technique	4
Road sub-surface defect detection based on gprMax forward simulation-sample generation and Swin Transformer-YOLOX	4
Simulation of steel beam under ceiling jet based on a wind-fire-structure coupling model	4
A hybrid machine learning model to estimate self-compacting concrete compressive strength	4
Linear viscoelastic behavior of asphalt binders and mixtures containing very high percentages of reclaimed asphalt pavement	4
An isogeometric approach for nonlocal bending and free oscillation of magneto-electro-elastic functionally graded nanobeam with elastic constraints	4
Bayesian Optimized LightGBM model for predicting the fundamental vibrational period of masonry infilled RC frames	4
Controlling interstory drift ratio profiles via topology optimization strategies	4
Resilience assessment of bridges considering multi-hazard of earthquakes and blasts	4
QPSO-ILF-ANN-based optimization of TBM control parameters considering tunneling energy efficiency	4
Probabilistic study of premature shear failure of slender reinforced concrete one-way slabs subjected to blast loading	4
Optimization of polyurethane-bonded thin overlay mixture designation for airport pavement	4
Wind-structure interaction data-driven neural-network model proposition for assessing performance of unique stiffening-helix against wind-induced open-top tank-buckling	4
Bond behavior of the interface between concrete and basalt fiber reinforced polymer bar after freeze-thaw cycles	4
Adhesion performance of alkali-activated material for 3-dimensional printing of tunnel linings at different temperatures	4
Ground penetrating radar detection of steel fiber reinforced composite linings in shield tunnels: Experimental and field studies	4
Effect of strata restraint on seismic performance of prefabricated sidewall joints in fabricated subway stations	4
Exploring the mechanical properties of steel- and polypropylene-reinforced ultra-high-performance concrete through numerical analyses and experimental multi-target digital image correlation	4
Numerical study of axial-loaded circular concrete-filled aluminum tubular slender columns	4
Design parameter optimization method for a prestressed steel structure driven by multi-factor coupling	4
Mechanical responses of multi-layered ground due to shallow tunneling with arbitrary ground surface load	4
Bending failure performance of a shield tunnel segment based on full-scale test and numerical analysis	4
Interface failure of segmental tunnel lining strengthened with steel plates based on fracture mechanics	4
Prediction of bearing capacity of pile foundation using deep learning approaches	4
Seismic response of pile-supported structures considering the coupling of inertial and kinematic interactions in different soil sites	4
Research on an innovative structure of an open-ribbed steel–ultra-high performance concrete composite bridge deck	4