OOIR: Observatory of International Research

Papers

(The TQCC of Frontiers of Structural and Civil Engineering is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)

Article	Citations
Crack detection for wading-concrete structures using water irrigation and electric heating	92
Responses of a short column-supported highrise tower to adjacent deep excavations in water-rich sandy strata and dynamic optimization of protection plans	81
Intensive construction technology for urban underground parking shaft	68
Stability of three-dimensional printable foam concrete as function of surfactant characteristics	50
Ductility improvement of GFRP-RC beams using precast confined concrete block in compression zone	43
Investigation of notch effect in the optimum weight design of steel truss towers via Particle Swarm Optimization and Firefly Algorithm	40
Prediction of vertical displacement for a buried pipeline subjected to normal fault using a hybrid FEM-ANN approach	37
Estimation of the axial capacity of high-strength concrete-filled steel tube columns using artificial neural network, random forest, and extreme gradient boosting approaches	29
Seismic performance of fabricated continuous girder bridge with grouting sleeve-prestressed tendon composite connections	27
Experimental investigation of evolutive mode-I and mode-II fracture behavior of fiber-reinforced cemented paste backfill: Effect of curing temperature and curing time	27
Axisymmetric loading on nanoscale multilayered media	26
Effects of time-varying liquid bridge forces on rheological properties, and resulting extrudability and constructability of three-dimensional printing mortar	24
Experimental and numerical investigation of the assembled monolithic spherical-shaped reinforced concrete ribbed folded plate structure	24
Analytical study on the mechanical behavior of longitudinal joints in shield tunnel strengthened by a steel ultrahigh performance concrete composite	20
An artificial neural network based deep collocation method for the solution of transient linear and nonlinear partial differential equations	20
Analytical algorithms of compressive bending capacity of bolted circumferential joint in metro shield tunnels	19
An ultra-thin bolt tension sensor and online monitoring system: For application in hydropower plant unit	19
Estimating flexural strength of precast deck joints using Monte Carlo Model Averaging of non-fine-tuned machine learning models	19
Experimental and numerical evaluation of multi-directional compressive and flexure behavior of three-dimensional printed concrete	19
Safety assessment for buried drainage box culvert under influence of underground connected aisle blasting: A case study	18
Degree of bending of concrete-filled rectangular hollow section K-joints under balanced-axial loadings	17
Research on mechanical performance of longitudinal joints in segmental tunnel linings strengthened by fiber-reinforced plastic grid with polymer-cement-mortar method	17
Effect of interface adhesion factor on the bearing capacity of strip footing placed on cohesive soil overlying rock mass	17
An end-to-end 3d seismic simulation of underground structures due to point dislocation source by using an FK-FEM hybrid approach	17
Explicit Peck formula applied to ground displacement based on an elastic analytical solution for a shallow tunnel	17

Study of the mechanics of progressive collapse of FPB isolated beam-pier substructures	16
Exploration on electrical resistance tomography in characterizing the slurry spatial distribution in cemented granular materials	16
Design of computer vision assisted machine learning based controller for the Stewart platform to track spatial objects	16
Prediction of falling weight deflectometer parameters using hybrid model of genetic algorithm and adaptive neuro-fuzzy inference system	16
Performance-based seismic assessment of a historical masonry arch bridge: Effect of pulse-like excitations	16
Development and road performance of clear asphalt with high transparency and adhesion	16
Hierarchical model updating for high-speed maglev vehicle/guideway coupled system based on multi-objective optimization	16
Laboratory investigation of emulsified asphalt binder modified with wood-derived nano-cellulose and nano paper-cellulose	16
The damage evolution behavior of polypropylene fiber reinforced concrete subjected to sulfate attack based on acoustic emission	15
A data-based inverse problem-solving method for predicting structural orderings	15
Predicting shear strength of slender beams without reinforcement using hybrid gradient boosting trees and optimization algorithms	15
The influence of phase change material filled three-dimensional printed artificial aggregates on the properties of blast furnace slag based alkali-activated concrete	15
Research on concrete structure defect repair based on three-dimensional printing	15
Numerical simulation of three dimensional concrete printing based on a unified fluid and solid mechanics formulation	15
Compressive and cyclic flexural response of double-hooked-end steel fiber reinforced concrete	15
Flexural and longitudinal shear performance of precast lightweight steel–ultra-high performance concrete composite beam	14
Influence of freeze–thaw damage gradient on stress–strain relationship of stressed concrete	14
Stability analysis of layered slopes in unsaturated soils	14
The development of ultralightweight expanded perlite-based thermal insulation panel using alkali activator solution	13
Aging properties and aging mechanism of activated waste rubber powder modified asphalt binder based on rheological properties and micro-characterization	13
Flexural behavior of textile reinforced mortar-autoclaved lightweight aerated concrete composite panels	13
Finite element simulation for elastic dislocation of the North-Tehran fault: The effects of geologic layering and slip distribution for the segment located in Karaj	13
Concrete strength and durability prediction through deep learning and artificial neural networks	13
Optimization design of anti-seismic engineering measures for intake tower based on non-dominated sorting genetic algorithm-II	13
Experimental investigation on freeze-thaw durability of polymer concrete	13
The use of fine portions from construction and demolition waste for expansive soil stabilization: A review	13
Seismic effects on reinforcement load and lateral deformation of geosynthetic-reinforced soil walls	13
Predetermination of potential plastic hinges on reinforced concrete frames using GFRP reinforcement	13
A 3D sliced-soil–beam model for settlement prediction of tunnelling using the pipe roofing method in soft ground	12
Proposing a development framework for sustainable architecture, engineering, and construction industry in China: Challenges, best practice, and future directions	12
Strengthening of the concrete face slabs of dams using sprayable strain-hardening fiber-reinforced cementitious composites	12
Behaviour of self-centring shear walls—A state of the art review	12
Sustainable antibacterial performance in cementitious systems using Ag-modified TiO2 compounds	12
A surrogate model for uncertainty quantification and global sensitivity analysis of nonlinear large-scale dome structures	12
Reliability analysis of excavated slopes in undrained clay	12
Numerical simulation of rime ice accretion on a three-dimensional wind turbine blade using a Lagrangian approach	12
Structural dimension optimization and mechanical response analysis of fabricated honeycomb plastic pavement slab	11
Influence of surface cracking, anchor head profile, and anchor head size on cast-in headed anchors in geopolymer concrete	11
Layout optimization of steel reinforcement in concrete structure using a truss-continuum model	11
Geometric quality evaluation of three-dimensional printable concrete using computational fluid dynamics	10
Optimization of machine learning models for predicting the compressive strength of fiber-reinforced self-compacting concrete	10
LSSVM-based approach for refining soil failure criteria and calculating safety factor of slopes	10
Effect of size on biaxial flexural strength for cement-based materials by using a triangular plate method	10
Numerical analysis on seismic response and failure mechanism of articulated pile–structure system in a liquefiable site from shaking-table experiments	10
Discontinuous mechanical behaviors of existing shield tunnel with stiffness reduction at longitudinal joints	10
Uncertainty of concrete strength in shear and flexural behavior of beams using lattice modeling	10
Bridging finite element and deep learning: High-resolution stress distribution prediction in structural components	10
Investigation on identification of structural anomalies from polluted data sets using an unsupervised learning method	9
An efficient improved Gradient Boosting for strain prediction in Near-Surface Mounted fiber-reinforced polymer strengthened reinforced concrete beam	9
Electromechanical admittance-based automatic damage assessment in plate structures via one-dimensional CNN-based deep learning models	9

Numerical modeling of current-induced scour around multi-wall foundation using large-eddy simulation	9
Computational modeling of fracture in capsule-based self-healing concrete: A 3D study	9
Application of machine learning technique for predicting and evaluating chloride ingress in concrete	9
Effects of microfine aggregate in manufactured sand on bleeding and plastic shrinkage cracking of concrete	9
A hierarchical system to predict behavior of soil and cantilever sheet wall by data-driven models	8
Effects of green roof damping and configuration on structural seismic response	8
Ensemble unit and AI techniques for prediction of rock strain	8
Drainage design combining drain holes and pinholes for tunnel boring machine segments subject to high water pressure	8
Simplified seismic scenario analysis of existing masonry buildings accounting for local site effects	8
Assessment and prediction of the mechanical properties of ternary geopolymer concrete	8
An extended numerical model of the first exothermic peak for three dimensional printed cement-based materials	8
Effect of cavity defect on the triaxial mechanical properties of high-performance concrete	8
Development of combined transitional pavement structure for urban tram track-road grade crossings	8
Mechanical behavior and permeability properties of sustainable and high-performance anisotropic three-dimensional printable concrete	8
Bridging the gap between laboratory and field moduli of asphalt layer for pavement design and assessment: A comprehensive loading frequency-based approach	8
Mixed mode (I/II) fracture of Glass/PA6 thermoplastic composites based on hybrid distance and correlation-based multiple target tracking methods	8
Construction technology for deep tunnels crossing superhigh-temperature fault zones with high water surges	8
Stable expression and control parameters in the numerical simulation of unsaturated flow	8
A practical multi-lane factor model of bridges based on multi-truck presence considering lane load disparities	8
Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated with custom-designed mortar and fabrics	8
Variability of waste copper slag concrete and its effect on the seismic safety of reinforced concrete building: A case study	7
A state-of-the-art review of the development of self-healing concrete for resilient infrastructure	7
Frost heaving behavior and mechanical deterioration of prestressed concrete	7
Hysteretic behavior of cambered surface steel tube damper: Theoretical and experimental research	7
Structural optimization of filament wound composite pipes	7
Acoustic emissions evaluation of the dynamic splitting tensile properties of steel fiber reinforced concrete under freeze–thaw cycling	7
Properties and printability evaluation of three-dimensional printing magnesium oxychloride cement by fully utilizing aeolian sand	7
Parametric study on seismic performance of self-centering reinforced concrete column with bottom-placed rubber layer	7
Mechanical behavior of NiTi shape memory alloy under cyclic loading: A state-of-the-art review	7
Accounting for the uncertainties in the estimation of average shear wave velocity using VS-N correlations	7
Prediction of characteristic blast-induced vibration frequency during underground excavation by using wavelet transform	7
Numerical analysis of vehicle-bridge coupling vibration concerning nonlinear stress-dependent damping	7
Effects of X-shaped energy dissipating steel dampers on the seismic response of high-speed railway track-bridge systems considering costs	7
Correction to: Effect of undercut on the lower bound stability of vertical rock escarpment using finite element and power cone programming	7
Effects of natural zeolite and sulfate ions on the mechanical properties and microstructure of plastic concrete	7
A novelty solution for orthotropic composite plate based on physics informed neural network	6
Acoustic emission characteristics of damage evolution of multi-scale fiber reinforced rubberized concrete under uniaxial compression and tension after being subjected to high temperatures	6
Model testing of tripod caisson foundations in silty clay subjected to eccentric lateral loads	6
Numerical analysis of bearing behaviors of single batter piles under horizontal loads in various directions	6
Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets	6
A theoretical model for investigating shear lag in composite cable-stayed bridges	6
Structural build-up model for three-dimensional concrete printing based on kinetics theory	6
Proposing two new methods to decrease lateral-torsional buckling in reduced beam section connections	6
Laboratory evaluation of high-friction thin overlays for pavement preservation	6
Experimental study on the stratum applicability and mechanisms of bubble-slurry for earth pressure balance shields	6
A new ecological underground group tank with inner steel plate lining for edible oil: Full-scale test and numerical simulation	6
Comparative analysis of twelve transfer learning models for the prediction and crack detection in concrete dams, based on borehole images	6
A multi-objective design method for seismic retrofitting of existing reinforced concrete frames using pin-supported rocking walls	6
Optimization of the mechanical performance and damage failure characteristics of laminated composites based on fiber orientation	6
Analysis on damage causes of built-in corridor in core rock-fill dam on thick overburden: A case study	6
Longitudinal shaking of culvert-frame combined underground structure	6
Evaluating the usability of recycled aggregates as fill materials depending on the composition and strength of their grains	6
Shear behavior of reinforced concrete beams strengthened utilizing optimized external post-tensioning techniques	6
A dynamic stiffness-based framework for harmonic input estimation and response reconstruction considering damage	6
Undrained seismic bearing capacity of strip footing adjacent to a heterogeneous excavation	6
Integrating storm surge modeling with traffic data analysis to evaluate the effectiveness of hurricane evacuation	6