Journal of Central South University

Article	Citations
Temperature effect on shear behavior of ore-backfill coupling specimens at various shear directions	168
Bearing effect of arched frame structures with longitudinal connections in large-section tunnels	68
Removal of arsenic from arsenic-containing solution in a three-dimensional electrode reactor	57
A discharging internal resistance dynamic model of lithium-ion batteries based on multiple influencing factors	55
Thermal and pressure performance of heat collection tube group in backfill body added with phase change material	54
A Sarsa reinforcement learning hybrid ensemble method for robotic battery power forecasting	50
Investigation of β/α″ interface in Ti-Nb alloy	50
Bearing characteristics and safety control of hydraulic support groups in shallow-buried thin bedrock ultra-long working faces	49
Influence of rare earth element erbium on microstructures and properties of as-cast 8030 aluminum alloy	46
Application of optimized random forest regressors in predicting maximum principal stress of aseismic tunnel lining	45
Elastoplastic bridge deck response spectra of high-speed railway simply-supported girder bridge with CRTSII track system	43
Research advancements in phosphogypsum crystal modifiers	41
Effect of isothermal compression and subsequent heat treatment on grain structures evolution of Al-Mg-Si alloy	40
Exploring the evolution of texture and properties of ultrafine copper wire during high strain drawing process	39
Study on the characteristics of crack initiation in deep dense shale containing circular hole under varying stress conditions	39
Microstructure and wear property of laser cladded WC particles reinforced CoCrFeNiMo composite coatings on Cr12MoV steel	38
Mechanical properties and wear behavior of extruded basalt fibers/7075 aluminum matrix composites used for drill pipes	37
Enhanced oxidation mechanism of arsenopyrite in two-stage oxidation process applying bio-oxidation waste solution	36
Undercutting mechanism of worm wheel in offsetting normal arc-toothed cylindrical worm drive	35
Annealing temperature influence on forming limit curve and fracture toughness of aluminium/silver bilayer sheets	35
Preface to the special issue on laser processing and micro-nano technology	33
Hollow structured SnO2/NxC composites: Preparation approach and promising performance in lithium-ion battery	32
Synthesis of foamed geopolymers by substituting fly ash with tailing slurry for the highly efficient removal of heavy metal contaminants: Behavioral and mechanistic studies	30
Effect of Sm content on microstructure evolution and mechanical properties of as-cast Mg−6Al−2Sr alloys	30
Dynamic behaviors and mitigation measures of a train passing through windbreak transitions from ground to cutting	30

Band gap modulation of nanostructured WO3 nanoplate film by Ti doping for enhanced photoelectrochemical performance	30
Effect of impurity on microstructure and properties on hot-pressed boron carbide ceramics	29
Estimating model for urban carrying capacity on bike-sharing	29
Probabilistic concentration prediction of PM2.5 in subway stations based on multi-resolution elastic-gated attention mechanism and Gaussian mixture model	29
Aluminum composite powder as an additive in epoxy coatings for enhancement of corrosion protection of carbon steel	29
Process parameter effects on microstructure and mechanical properties of tubes processed via friction assisted tube straining method	28
Crack propagation behavior in sandstone during unloading confining pressure under different seepage pressures	28
One-pot alternating current synthesis of SnO2 based composite with enhanced diffusion kinetic behaviors for lithium-ion batteries	27
Interfacial optimization enabling reversible and stable aqueous zinc metal batteries under harsh conditions	27
Low-cost synthesis of high-purity Li2S for sulfide solid state electrolytes enabled by polyvinyl alcohol	26
Evaluation of thixotropic behaviors of tailings pastes as a function of solids concentration	26
A deep dense captioning framework with joint localization and contextual reasoning	26
Effect of car-body lower-center rolling on aerodynamic performance of a high-speed train	25
Preparation and properties of double-template magnetic molecularly imprinted polymers for removal of nitrophenol from drinking water	25
Anisotropy in shear-sliding fracture behavior of layered shale under different normal stress conditions	25
Influence of tunnel axis stress on mechanical response and fracture characteristics of rock surrounding tunnel subjected to gradient stress	25
Construction of dicyandiamide-coated manganese dioxide composite and its mechanism for improving zinc storage performance	25
Brazing of C/C composites and 304 stainless steels via Ni/Mo composite interlayer	25
Tooth surface error correction of hypoid gears machined by duplex helical method	24
Solution and aging behavior of precipitates in laser melting deposited V-5Cr-5Ti alloys	24
Laser surface functionalization to achieve extreme surface wetting conditions and resultant surface functionalities	24
Precision loss of ball screw mechanism under sliding-rolling mixed motion behavior	24
Synthesis of nano- to micrometer-sized B4C particle-reinforced aluminum matrix composites via powder metallurgy and subsequent heat treatment	23
Bioleaching and dissolution kinetics of pyrite, chalcocite and covellite	23
Influence of temperature on creep behavior, mechanical properties and microstructural evolution of an Al-Cu-Li alloy during creep age forming	23
A new nonlinear empirical strength criterion for rocks under conventional triaxial compression	23
Periodic electromagnetic signals as potential precursor for seismic activity	23
Influence of processing parameters on deposition characteristics of Inconel 625 superalloy fabricated by laser solid forming	22
Dynamic regimes of cemented backfill at early-age	22
Effect of reductant sodium bentonite content and reaction temperature in sponge iron production from composite pellets	22
Combined effects of local curvature and elasticity of an isothermal wall for jet impingement cooling under magnetic field effects	22
A data-driven early micro-leakage detection and localization approach of hydraulic systems	22
Annealing twin mechanism for 304 stainless steel solution treatment process	21
Improving performance of flat plate solar collector using nanofluid water/zinc oxide	21
Determining representative elementary volume size of in-situ expansive soils subjected to drying-wetting cycles through field test	21
Li1.4Al0.4Ti1.6(PO4)3 coated Li1.2Ni0.13Co0.13Mn0.54O2 for enhancing electrochemical performance of lithium-ion batteries	20
Collaborative optimization of exhaust gas recirculation and Miller cycle of two-stage turbocharged marine diesel engines based on particle swarm optimization	20
Influence of furnace temperature and non-uniform heat flux density on direct reduction process of newly designed carbon containing pellet	20
Effects of grafting cell penetrate peptide and RGD on endocytosis and biological effects of Mg-CaPNPs-CKIP-1 siRNA carrier system in vitro	20
Multi-objective optimization based optimal setting control for industrial double-stream alumina digestion process	20
Running safety and seismic optimization of a fault-crossing simply-supported girder bridge for high-speed railways based on a train-track-bridge coupling system	20
Evaluation methods of man-machine-environment system for clean and safe production in phosphorus mines: A case study	20
Nonlinear free vibration of graphene platelets reinforced composite corrugated plates	19
Impact of ultrasonic power on liquid fraction, microstructure and physical characteristics of A356 alloy molded through cooling slope	19
Passive heat transfer enhancement of laminar mixed convection flow in a vertical dimpled tube	19
Effect of Na2O on transition and stability of dicalcium silicate based on sintering process	19
Investigation on aerodynamic noise reduction for snow-plough of high-speed train	19
High sensitivity micro-displacement sensor based on fiber Bragg grating and amplification substrate	18
Synthesis and applications of Ag@C composites: Progress and opportunity	18
Preparation of semiconductor zinc telluride by photoelectrochemical deposition	18

Laboratory and temporal moment analysis of tracer-based solute transport in karst conduits	18
Effective photocatalytic conversion of formic acid using iron, copper and sulphate doped TiO2	18
Influence of Si content on interface reaction of iron-based hot-dip aluminizing on Fe sheet	18
Analytical solution for one-dimensional nonlinear consolidation of layered soils with continuous drainage boundary	18
Optimal design of automotive body B-pillar using simplified finite element model of body-in-prime combined with an optimization procedure	18
Boosting catalytic activities of carbon felt electrode towards redox reactions of vanadium ions by defect engineering	18
Stainless steel anisotropic superhydrophobic surfaces fabrication with inclined cone array via laser ablation and post annealing treatment	18
Biodissolution of pyrite and bornite by moderate thermophiles	18
Numerical investigation of friction stir welding parameters on microstructure, thermal and mechanical properties of ultrafine-grained Al-0.2 wt% Sc alloy sheet	18
Recent progress of fiber-shaped batteries towards wearable application	18
Microstructure and corrosion properties of micro-beam plasma remelted Mg-12Dy-1.1Ni alloy	17
A new empirical chart for coal burst liability classification using Kriging method	17
Fatigue crack retardation by the application of hard damping coating to blades under resonance	17
Zonal disintegration phenomenon based on triaxial dynamic load test of hollow cylindrical sandstone specimens	17
Stress wave propagation attenuation law and energy dissipation characteristics of rock-barrier-coal composite specimen under dynamic load	17
Analysis of magnetohydrodynamic squeezed viscous fluid flow in a porous medium	17
Succinonitrile broadening the temperature range of Li/CFx primary batteries	17
Comparative thermodynamic analysis of gold dissolution in four organic carboxylic acid-catalyzed thiosulfate systems using Eh–pH and species distribution diagrams	16
A data-driven method to predict future bottlenecks in a remanufacturing system with multi-variant uncertainties	16
Phase change dynamics in a triangular elastic walled vented cavity having phase change material packed bed during nanofluid forced convection	16
One-dimensional nonlinear consolidation analysis of soil with continuous drainage boundary	16
Numerical study of solar tray with noble Mxene nanofluids	16
Multi-dimension and multi-modal rolling mill vibration prediction model based on multi-level network fusion	16
Effects of pre-rolling on mechanical properties and fatigue crack growth rate of 2195 Al-Li alloy	16
DFT/TDDFT study on electronic, optical and structural properties of MAPbI3/RbSnI2Cl and MAPbI2Cl/RbXI3 (X=Pb, Sn) heterostructures	16
Effects of Cu addition on microstructure and mechanical properties of Er-modified Al-10Mg2Si cast alloys	16
Experimental study on nonlinear mechanical behavior and sampling damage characteristics of rocks from depths of 4900–6830 m in Well Songke-2	16
Cyclic test and numerical study of seismic performance of precast segmental concrete double-columns	16
Influence of pier height on the safety of trains running on high-speed railway bridges during earthquakes	16
Optimizing thermal performance of a premixed hydrogen/air fueled micro-combustor with baffles	16
Energy evolution and failure characteristics of sandstone under high temperature and acidic solutions	15
Experimental studies on mechanical properties and brittleness of granite treated with different microwave heating times	15
A whole process damage constitutive model for layered sandstone under uniaxial compression based on Logistic function	15
Preparation and characterization of high hard and high tough ultrafine WC ceramics containing hybrid graphene and SiC nanowire	15
A study of inclined magnetically driven Casson nanofluid using the Cattaneo-Christov heat flux model with multiple slips towards a chemically reacting radially stretching sheet	15
P- and S-wave arrival time combined Bayesian location method for a microseismic event	15
Potassium recovery from muscovite using NaCl-roasting followed by H2SO4-leaching	15
Effect of thermo-mechanical treatment on microstructure and mechanical properties of wire-arc additively manufactured Al-Cu alloy	15
Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear	15
Preparation and capacitance properties of Ni foam@graphene@Co3O4 composite electrode materials	15
An analytical p-y curve method based on compressive soil pressure model in sand soil	15
Analysis of incompressible viscous fluid flow in convergent and divergent channels with a hybrid meta-heuristic optimization techniques in ANN: An intelligent approach	15
Sensitivity and effect of key operational parameters on performance of a dual-cylinder free-piston engine generator	15
Hollow tubes constructed by carbon nanotubes self-assembly for CO2 capture	15
Dual-loading strategy to construct Au-BiOBr-TiO2 photocatalysts for fast and efficient degradation of xanthates under visible light	14
Preparation and performance of a coal gasification slag-based composite for simultaneous immobilization of Cd and As	14
Risk assessment of floor water inrush in coal mines based on MFIM-TOPSIS variable weight model	14
Microseismic energy and intensity criterion of rockburst in deep TBM tunnels: A case study of the Neelum-Jhelum hydropower project	14
Study of aerodynamic characteristics of a high-speed train with wings moving through a tunnel	14
Isotherm, kinetic and thermodynamic investigations of boron phosphide to remove methylene blue from aqueous solution	13
Influence of confined water on the limit support pressure of tunnel face in weakly water-rich strata	13
Failure mechanisms and destruction characteristics of cemented coal gangue backfill under compression effect of non-uniform load	13
Effect of carbon on microstructure, mechanical properties and wear resistance of non-equiatomic Fe70Co7.5Cr7.5Ni7.5V7.5 medium-entropy alloys fabricated by powder metallurgy	13
Temperature effects on the failure of deep circular tunnel under true-triaxial compression	13
Numerical analysis of building structures response under effect of continuous and stepped non-uniform settlement	13
Determination of ultimate bearing capacity of uplift piles using intact and non-intact load-displacement curve	13
Combined effect of rock fabric, in-situ stress, and fluid viscosity on hydraulic fracture propagation in Chang 73 lacustrine shale from the Ordos Basin	13
Strength and damage evolution mechanism of rock mass with holes under cyclic loading	13
Characteristic and optimization of ferrite-rich sulfoaluminate-based composite cement suitable for cold region tunnels	13
Characterization of fluidized reduction roasting of nickel laterite ore under CO/CO2 atmosphere	13
Chromium stabilization by polysulfide supported nZVI@biochar in contaminated soil: Cr bioavailability and stabilization mechanism	13
Innovative Research Group of Hunan Province	13
Evaluation of the slipstream in different regions around a train with respect to different nose lengths: A comparison study	13
Evolution of microstructure and mechanical properties in multi-layer 316L-TiC composite fabricated by selective laser melting additive manufacturing	13
Mechanism, prevention, and control of mining-induced dynamic disasters in underground metal mines in China: Challenges and solutions	13
Rotation forest based on multimodal genetic algorithm	13
Integrated design of brushless motor drive and control system for robot joints	13
Microstructure and hot corrosion properties of an Al-Y coating on TiAl alloy	13
Influence of pH on the leaching behaviour of heavy metal(loid)s in copper smelting flue dust and mineralogical control mechanism	12
Microseismic source location using the Log-Cosh function and distant sensor-removed P-wave arrival data	12
Swelling inhibition and infiltration promotion mechanism of polyethyleneimine	12
Effect of TiC nanoparticle on friction and wear properties of TiC/AA2219 nanocomposites and its strengthening mechanism	12
Pore structure related triaxial mechanical response and strength criterion of basalt fibre-reinforced coral aggregate concrete	12
Visualization detection of slurry transportation pipeline based on electrical capacitance tomography in mining filling	12
Ventilation control of tunnel drilling dust based on numerical simulation	12
Study on stability mechanism and control techniques of surrounding rock in gob-side entry retaining with flexible formwork concrete wall	12
Effect of platform temperature on microstructure and corrosion resistance of selective laser melted Al-Mg-Sc alloy plate	12
Seepage characteristics test of carbonaceous mudstone soil-rock mixture considering rock content and rainfall infiltration angle	12
Mechanical behavior and deformation mechanism of ballast bed with various fouling materials	12
Photothermal self-healing polyurethane coating based on hollow nanofillers in seawater	12

Continuous dynamic recrystallization nucleation mechanism and annealing twin evolution with respect to grain growth in a nickel-based superalloy	12
Generalized distributed four-domain digital twin system for intelligent manufacturing	12
Research and application of mechanical models for the whole process of 110 mining method roof structural movement	12
Effect of Sn on elastic modulus and magnetic susceptibility of Zr-16Nb-xTi (x=4 wt%, 6 wt%) alloys	12
Effect of Mg and Si on intermetallic formation and fracture behavior of pure aluminum-galvanized carbon-steel joints made by weld-brazing	12
Mechanical properties of deep sandstones under loading rate effect	12
Metal-organic framework-derived porous carbon for the advanced aqueous zinc-ion hybrid capacitor	12
Sound absorption performance of acoustic metamaterials composed of double-layer honeycomb structure	12
Flow and heat transfer analysis of polymeric fluid in the presence of nanoparticles and microorganisms	12
One-step random-walk process of nanoparticles in cement-based materials	12
Creep properties of bimetal Al/SiC/Cu composites fabricated via accumulative roll bonding process	12
Microstructure and mechanical properties of Al-6.02Zn-1.94Mg alloy at higher solution treatment temperature	12
Experimental studies and failure mechanisms of strain and fault-slip rockburst: A review	12
Case study of microseismic tomography and multi-parameter characteristics under mining disturbances	12
Mechanical behaviors of cross roller bearings with raceway roundness error	12
Coupling vibration analysis of high-speed maglev train-viaduct systems with control loop failure	12
Suppression of thermal postbuckling and nonlinear panel flutter motions of variable stiffness composite laminates using piezoelectric actuators	12
Three-dimensional stability of two-step slope with crack considering temperature effect on unsaturated soil	12
Preface: Energy and sustainable development	12
Comprehensive utilization of spodumene ore through pyrometallurgical process with Fe2O3 addition	12
Day-to-day traffic user equilibrium model considering influence of intelligent highways and advanced traveler information systems	12
Theoretical analysis and numerical simulation on the coupled support technology of concrete-filled steel tube and bolt-cable in deep roadway	12
Improved mechanical and wear properties of Ti−35Nb−5Ta−7Zr−xSi alloys fabricated by selective electron beam melting for biomedical application	12
A unique method for curing composite materials by introducing vibration treatment into the hybrid heating process	11
Numerical investigation of effect of eccentric decoupled charge structure on blasting-induced rock damage	11
An advanced turbulator with blades and semi-conical section for heat transfer improvement in a helical double tube heat exchanger	11
Longitudinal and cross-sectional partitioned failure mechanism of tunnels subjected to stick-slip action of strike-slip faults	11
Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis	11
Preparation of chitosan modified fly ash under acid condition and its adsorption mechanism for Cr(VI) in water	11
Flotation separation of pyrite from chalcopyrite by tetrazinan-thione collectors	11
Estimation of active earth pressure based on pseudo-dynamic approach and discretization technique	11
Precursory characteristics of large-scale rockmass collapse based on multiple microseismic parameters	11
Femtosecond laser modulated into Bessel beam by spatial light modulator for Fresnel zone plate processing	11
Rockburst prediction model using machine learning based on microseismic parameters of Qinling water conveyance tunnel	11
A new method for a numerical investigation of the windproof performance of porous windbreaks for high-speed railways based on a physical model	11
Hydraulic fracturing of granite under real-time high temperature and true triaxial stress	11
Recent advances in coherent perfect absorber-lasers and their future applications	11
Synthesis of hetero-site nucleation twisted bilayer MoS2 by local airflow perturbations and interlayer angle characterization	11
Mechanism of water inrush from the tunnel face induced by fault and its application	11
Heat transfer analysis of unsteady nanofluid flow between moving parallel plates with magnetic field: Analytical approach	11
Shear mechanical properties and frictional sliding responses of rough joint surfaces under dynamic normal displacement conditions	11
Mechanical and damage evolution characteristics of granite after heating-cooling cycles	11
Role of Fe/S ratios in the enhancement of uranium bioleaching from a complex uranium ore by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans consortium	11
Acid corrosion micro-macro mechanism of enzyme-induced carbonate precipitation (EICP) treated sandy soils	11
Experimental investigation on synergetic prediction of granite rockburst using rock failure time and acoustic emission energy	11
Mechanical properties and energy-dissipation mechanism of frozen coarse-grained and medium-grained sandstones	11
Interaction of 3D parallel internal cracks in brittle solids under thermal loading: Experiment and numerical simulation	11
Nonlinear model predictive control based on hyper chaotic diagonal recurrent neural network	11
Evaluation of development potential of pumped hydroelectric storage and geothermal utilization system in abandoned coal mine	11
Numerical simulation of dynamic fracture properties of rocks under different static stress conditions	11
Mechanical properties and microscopic failure process of exemplary argillaceous interlayer from east China	11
A review of arsenic reaction behavior in copper smelting process and its disposal techniques	10
Heat strain in chemical protective clothing in hot-humid environment: Effects of clothing thermal properties	10
Fatigue properties of binary Ti-Ta metal-metal composite with lamellar microstructure	10
A promising method for recovery of LiMn2O4 and graphite from waste lithium-ion batteries: Roasting enhanced flotation	10
PVC gel bio-inspired adhesives with variable modulus and its application in a gripper	10
Catalysis of CuO on degradation of organic substance in Bayer liquid	10
Enhanced performance of cesium copper halide nanocrystal light-emitting diodes via post-treatment induced phase regulation	10
Inversion of self-potential anomalies caused by simple polarized bodies based on particle swarm optimization	10
Achieving high strength and ductility in Ti-6.8Mo-3.9Al-2.8Cr-2Nb-1.2V-1Zr-1Sn alloy by rapid optimizing microstructure through gradient heat treatment	10
Microstructure and mechanical properties of friction stir welded powder metallurgy AA2024 alloy	10
Non-isothermal aging behavior of a friction-surfaced Al-Cu-Mg alloy matrix composite coating reinforced by nickel-aluminide	10
Mechanism development of strength contributed by CPB with rice husk ash	10
Optimization mechanism of matrix microstructure evolution on strength-plasticity of Mg/Al composite plate during hard-plate accumulative roll bonding	10
Evolution of microstructure of aluminum alloy hollow shaft in cross wedge rolling without mandrel	10
Mechanical properties and microstructure evolution of an Al-Cu-Li alloy subjected to rolling and aging	10
Strain energy evolution and damage characteristics of deep clay under different stress rates	10
Effect of friction stir processing on microstructure and friction and wear properties of as-cast SiCp/ZL101 composites	10
Comparison of thermal and mechanical properties of γ′-Pt3Al and γ′-Ni3Al phases: A first principles study	10
Heat transfer enhancement of finned shell and tube heat exchanger using Fe2O3/water nanofluid	10
Effect of nitrite intercalated Mg−Al layered double hydroxides on mortar durability under Cl− and SO2−4 coexisting environment	10
Application of genetic algorithm to enhance the predictive stability of BP-ANN constitutive model for GH4169 superalloy	10
Seismic magnitude calculation based on rate- and state-dependent friction law	10
Dynamic tensile strength weakening effect of pretension stressed red sandstone under impact load	10
Creep aging behavior and performance of Al-Zn-Mg-Cu alloys under different parameters in retrogression aging treatment	10
Fabrication of Fe3C nanoparticles encapsulated in undoped graphite carbon and their catalysis for oxygen reduction	10
Ti3C2Tx MXene for organic/perovskite optoelectronic devices	10
The field-scale stabilization remediation and assessment of potential toxic elements based on the multi-source information from a Chinese Pb/Zn smelter contaminated site	10
Pt nanoparticles on ITO nanowires for electrochemical detection of L-ascorbic acid and dopamine	10
Recovery of zinc from electric arc furnace dust by alkaline pressure leaching using iron as a reductant	10
Influence of particle size and surfactants on uniformity and quantity of silicon carbide particles in electrodeposited nickel-silicon carbide coatings	10
Effects of (Li0.5Nb0.5)3+ co-substitution on microwave dielectric characteristics of MgAl2O4 ceramics	10
Expired drugs as vapor-phase corrosion inhibitors of copper in simulated marine atmospheric environment	10
Global stability coefficient of large underground caverns under static loading and earthquake wave condition	10
Thermodynamics of (Ca(OH)2-)NaOH-Na2WO4-H2O and (Ca(OH)2-)NaOH-Na3PO4-H2O systems and their application	9
Creep behavior of water-containing bedded shale	9
Effect of room temperature multi-pass ECAP deformation on mechanical properties and precipitation phase distribution of 7075 aluminium alloy	9
Piecewise linear representation of pressure wave data of high-speed trains traveling through tunnels	9
Generalized complex cilia tip modeled flow through an electroosmotic region	9
Effect of alkali cations on structure and stability of aluminum-oxygen-fluorine complex ions in aluminum electrolytes	9
Deformation microstructure and properties control of Cu-0.6Cr alloy in cryo-equal channel angular pressing	9
Selective and efficient extraction of Cu(II) from a complex sulfate solution containing Co(II), Fe(II), Cu(II), and Zn(II) using DZ988N	9
Experimental study on the evolutions of normal stiffness of fractured granites after different temperature treatments	9
Flotation separation of fluorite from calcite by a new depressant curdlan and its mechanism	9
Effect of oblique incident wave perturbation on rock spalling: An insight from DEM modelling	9