Journal of Petroleum Exploration and Production Technology

Papers
(The median citation count of Journal of Petroleum Exploration and Production Technology is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)
ArticleCitations
Advances in critical temperature shift modeling of confined pure fluids using the Kihara potential function150
High-resolution pressure transducer design and associated circuitry to build a network-ready smart sensor for distributed measurement in oil and gas production wells142
Boltzmann transformation of radial two-phase black oil model for tight oil reservoirs80
Investigation of displacement efficiency of different gas flooding in extra-low permeability reservoirs67
Assessing the viability of different bio-polymers and synthetic-copolymers with modified enzyme-induced carbonate precipitation solutions for sand consolidation applications50
Calculation method of equivalent permeability of dual-porosity media considering fractal characteristics and fracture stress sensitivity47
Differences in reservoir quality within distributary channel belts at the braided river delta front in the Xinchang area of Western Sichuan’s 2nd member of the Xujiahe Formation: genesis and implicati37
Characteristics and formative mechanism of lacustrine deep-water gravity flow deposition: a case study of the Yanchang Formation in the Ordos Basin36
A new insight into the evolution of the Qatar Arch to recognize faults and a new gas field34
Integrated fracture characterization of Asmari reservoir in Haftkel field34
Estimating electrical resistivity from logging data for oil wells using machine learning31
Maximizing efficiency and uniformity in SAGD steam circulation through effect of heat convection31
The control of effective source rocks on the distribution of hydrocarbon reservoirs in a lacustrine rift-basin: insights from a 3D basin modeling study30
A rock brittleness evaluation method in interbedded reservoirs based on statistical damage constitutive29
A new integrated HPHT experimental apparatus to measure interfacial tension, swelling factor, and viscosity simultaneously29
Modelling the flowing bottom hole pressure of oil and gas wells using multivariate adaptive regression splines29
Post-acid flush and its impact on breakdown pressure28
Review of underbalanced drilling techniques highlighting the advancement of foamed drilling fluids28
Experimental study of CO2 injectivity impairment in sandstone due to salt precipitation and fines migration26
Anisotropy of surface morphology of carbonate rocks after reaction with acid26
Development of a novel packer fluid for high-temperature and high-pressure oil and gas wells with using design of experiments and artificial intelligence26
Water saturation modeling in carbonate reservoirs using the bulk volume water approach26
Impact of rock mineralogy on reactive transport of CO2 during carbon sequestration in a saline aquifer25
The effect of forces affecting the spread of oil droplets on a rock surface25
Research on integrated injection-production optimization technology of electric submersible pump for Bohai oilfield heavy oil thermal recovery24
Investigating the effect of TiO2-based nanofluids in the stability of crude oil flow: parametric analysis and Gaussian process regression modeling24
A novel electrical rock typing approach to improve estimating formation resistivity factor in carbonate rocks24
Prospect evaluation based on integrated petroleum system analysis: Block E case study, south-eastern edge of Precaspian Basin (Kazakhstan)24
Post-drill geophysical characterization of two deep-water wells of Cauvery Basin, East Coast of India23
Multiphysics coupling study of near-wellbore and reservoir models in ultra-deep natural gas reservoirs23
Natural fractures characterization by integration of FMI logs, well logs and core data: a case study from the Sarvak Formation (Iran)22
Static and dynamic evaluation of formation damage due to barium sulfate scale during water injection in carbonate reservoirs22
Investigating the vaporization mechanism's effect on interfacial tension during gas injection into an oil reservoir22
Reconstructing anisotropic porous media from thin section images22
Pore scale simulation of phase trapping in artificial porous media prototypes22
Nanoparticles in enhanced oil recovery: state-of-the-art review21
Active learning based surrogate ensemble assisted multi-objective optimization framework for reservoir water-flooding optimization21
Characteristics and controlling factors of Lucaogou formation shale reservoir in the northern edge of Bogda Mountain, the Junggar Basin, China21
Fluid inclusion characteristics of the Jurassic reservoir and hydrocarbon accumulation process in the eastern Kuqa Depression, Tarim Basin21
Optimization of CO2 EOR and geological sequestration in high-water cut oil reservoirs21
Study on influence of failure mode on fracturing performance of fractured reservoir20
Velocity variation coefficient-based angle-dependent gradient conditioning scheme: a new strategy for an enhanced full waveform inversion20
The reservoir screening standard of CO2 huff-n-puff based on orthogonal analysis method and random forest algorithm20
Intelligent hydraulic fracturing under industry 4.0—a survey and future directions20
Differences in the permeability assessment of the fractured reservoir rocks using the conventional and the rough discrete fracture network modeling20
Characteristics and controlling factors of carbonate shoal reservoirs in the lower Triassic Feixianguan Formation, Kaijiang-Liangping Trough, Northeast Sichuan Basin, China20
Outlier detection and selection of representative fluid samples using machine learning: a case study of Iranian oil fields19
Predicting viscosity of CO2–CH4 binary mixtures using robust white-box machine learning frameworks: implication for carbon capture, utilization, and storage19
Identification of the bound and free fluid pore types in an Iranian carbonate reservoir through the integration of well logs, rock physics modeling, and 3D seismic data18
Experimental study on the injectivity, adsorption, and in-situ rheology of HPAM polymer in intact and fractured sandstone18
A new approach based on VIKOR and Monte-Carlo algorithms for determining the most efficient enhanced oil recovery methods: EOR screening18
Applied machine learning-based models for predicting the geomechanical parameters using logging data18
Automated lost circulation severity classification and mitigation system using explainable Bayesian optimized ensemble learning algorithms18
Evaluation of surface activity of rhamnolipid biosurfactants produced from rice bran oil through dynamic surface tension18
Estimation of geomechanical rock characteristics from specific energy data using combination of wavelet transform with ANFIS-PSO algorithm17
Decoding of seismic data for complex stratigraphic traps revealing by seismic attributes analogy in Yidma/Alamein concession area Western Desert, Egypt17
Estimation of tensile and uniaxial compressive strength of carbonate rocks from well-logging data: artificial intelligence approach17
Movement behavior of residual oil droplets and CO2: insights from molecular dynamics simulations17
Reservoir characterization analysis in glacial reservoirs16
Study on the influence of mechanical characteristics of multi-rhythm inter-salt shale oil on fracture propagation in Qianjiang formation, China16
4D seismic co-processing pre-stack depth migration for scarce acquisition repeatability16
Gravity displacement gas kick law in fractured carbonate formation16
Using silica nanoparticles and anionic surfactant in low-salinity water to enhance oil recovery in the Assam Shelf Basin15
Investigation of Surakhani light crude oil compounds as a case study using modern spectroscopic techniques15
Cutting mechanism of a special 3D concave-shaped PDC cutter applicable to the Weiyuan shale15
Drilling-vibration response characteristics of rocks based on Hilbert–Huang transform15
Spectral decomposition-based static reservoir simulations image Cretaceous hydrocarbon-bearing incised-valley, Southwest Pakistan15
Organic geochemical and petrological investigations of the upper miocene bongaya formation in the pitas, onshore sabah basin, and its relevance for hydrocarbon potential15
Using new chemical methods to control water production in oil reservoirs: comparison of mechanical and chemical methods14
An experimental study of epoxy-based nanocomposite for chemical consolidation in a sandstone reservoir with high clay content14
An integration of the numerical and soft computing approaches for determining inflow control device flow area in water injection wells14
Pore pressure prediction in a carbonate reservoir: a case study from Potwar Plateau, Pakistan14
Optimization of surfactant-polymer flooding for enhanced oil recovery14
Boosting machine learning algorithms for porosity prediction in sandstone gas reservoirs14
Quantifying the potential of the Raniganj Basin for shale gas exploration and CO2 sequestration using a deep learning framework13
Publisher Correction: Simultaneous inversion of five physical parameters of submarine gas reservoir from synthetic elastic impedance for high-efficiency reserve evaluation13
Treatment of paraffin deposition behavior in gas-condensate wells with chemical inhibitors13
A novel numerical simulation study on the flow mechanisms of deep low-permeability gas reservoirs13
Experimental investigation to understand the effect of fracturing fluid on the geomechanical behavior of mowry shale13
Investigation of liquid-electric separation properties following acidification in alkali-surfactant-polymer flooding13
3D-porous-GAN: a high-performance 3D GAN for digital core reconstruction from a single 3D image12
Fractured gas reservoir shut-in curve analysis and application12
Rapid evaluation of capillary pressure and relative permeability for oil–water flow in tight sandstone based on a physics-informed neural network12
Sensitivity analysis of low salinity waterflood alternating immiscible CO2 injection (Immiscible CO2-LSWAG) performance using machine learning application in sandstone reservoir12
Effect of CO2 on the interfacial tension and swelling of crude oil during carbonated water flooding12
Longshore changes in the microfacies and distribution of clastic barrier coastal sandbodies: a case from the Benxi formation in the Ordos Basin, China12
H2S removal from crude oil flows and gas-liquid mass transfer characteristics in T-junction straight and serpentine microchannels12
Open-hole extension limit of offshore extended-reach well considering formation collapse12
Multi-objective optimization of parameters design based on genetic algorithm in annulus aerated dual gradient drilling12
Liquid carry-over control using three-phase horizontal smart separators in Khor Mor gas-condensate processing plant12
Identification of challenging gas-bearing reservoir based on machine learning (ML) and computed conversion-based AVO analysis: a study from Jaisalmer Sub-basin, India12
Quantifying acid diversion efficiency through NMR tortuosity measurements11
Correction: Basin margin sediment wedge build out of the Eastern Niger Delta: application of shelf-edge trajectory pattern studies11
Recent advances in applications of green nanocomposites in enhanced oil recovery: a comprehensive review of different characterization methods and effective parameters11
Contribution of gas adsorption–desorption in Marcellus shale for different fractured well configurations11
Preparation and performance evaluation of ultra high temperature corrosion inhibitor for acidizing11
Comprehensive analysis of reservoir quality using microfacies and sedimentary environment characterization: insights from core and petrophysical data in early triassic gas reservoirs of the world’s la11
Modal state vectors of a free-hanging drilling riser during deployment and retrieval11
Prediction of permeability of highly heterogeneous hydrocarbon reservoir from conventional petrophysical logs using optimized data-driven algorithms11
The effect of high-temperature environment on the rheology and filtration properties of Rhizophora spp. tannin-lignosulfonate as bio-based additive in water-based drilling fluid11
Stepwise mathematical derivation of the Herschel–Bulkley laminar fluid flow equations—in pipes11
Study on drillability evaluation of glutenite reservoir rock using fractal theory and experiments11
A new water flooding characteristic curve at ultra-high water cut stage11
Application of machine learning to determine the shear stress and filtration loss properties of nano-based drilling fluid11
Fractal characteristics of artificially matured lacustrine shales from Ordos Basin, West China11
Experimental investigation of the rock cutting process and derivation of the 3D spatial distribution of the formation strength using in-cutter sensing11
Microfacies control on geomechanical properties of unconventional carbonate reservoirs: insights from a middle jurassic outcrop analogue in Saudi Arabia11
Hydrocarbon source rock assessment of the shale and coal bearing horizons of the Early Paleocene Hangu Formation in Kala-Chitta Range, Northwest Pakistan11
The maturity of Silurian Longmaxi shale in Jiaoshiba, Sichuan Basin: as revealed by laser Raman spectroscopy11
Discrete fracture modeling by integrating image logs, seismic attributes, and production data: a case study from Ilam and Sarvak Formations, Danan Oilfield, southwest of Iran10
Development and performance evaluation of foaming agent for heavy oil development and study on oil displacement mechanism in heterogeneous micromodel10
Lithium and Salt Extraction from the Bakken Produced Water10
Rolling window for detecting multiple Chan signatures to diagnose excessive water production10
Machine learning insights into CO2-brine interfacial tension: effects of salt type, concentration, and temperature10
The potential of offshore Nile Delta Basin natural gas reserves: a case study of Messinian reservoir in Baltim field10
Development and field application of strongly resilient temporary plugging diversion agent for fracturing10
Sub-basalt hydrocarbon prospect assessment in Peninsular India using seaward dipping reflectors9
Multiple linear regression and gene expression programming to predict fracture density from conventional well logs of basement metamorphic rocks9
Numerical experimental study on the fracture process of shale containing internal prefabricated cracks based on CT scanning with different quartz contents9
Numerical investigation of acid diversion using viscoelastic surfactant (VES) under single and two-phase flow conditions9
New correlations to estimate the rough fracture permeability using computational fluid dynamics simulation9
Characterization of wellbore asphaltene deposition in well Gaotan-1 in Junggar Basin, China9
The role of stylolites as a fluid conductive, in the heterogeneous carbonate reservoirs9
The migration mechanism of oil under natural depletion development for shale oil in Ordos Basin9
Time-aware predictive maintenance of electrical submersible pumps using catboost ensemble learning and trend-based labeling9
Numerical simulation and field application of biological nano-technology in the low- and medium-permeability reservoirs of an offshore oilfield9
Reactive transport modeling of scale precipitation and deposition during incompatible water injection in carbonate reservoirs9
Gene quantification and exploration in identifying potential oil and gas areas in North China: a comprehensive study on subtle reservoir exploration9
Geological characteristics and coalbed methane adsorbability of shallow coal rock in Qinshui Basin, China9
Physical experimental simulation of unconventional reservoir formation process for carboniferous in Hudson Oilfield, Tarim Basin9
Data-driven prediction of rate of penetration (ROP) in drilling operations using advanced machine learning models9
Numerical simulation study on parameter optimization of crosslinked polymer flooding for enhanced oil recovery in heavy oil reservoirs9
Geochemistry of oil seepages and Paleocene organic-rich shale deposits from the onshore East Coast Basin in New Zealand: implications for characteristics, origin and oil-source rock correlation9
Coupled hydro-mechanical simulation in the carbonate reservoir of a giant oil field in southwest Iran9
New approach of evaluating fracturing interference based on wellhead pressure monitoring data: a case study from the well group-A of Fuling shale gas field9
The influence of fracturing fluid temperature and viscosity on the migration and distribution of proppants within a fracture9
Application of machine and deep learning techniques to estimate NMR-derived permeability from conventional well logs and artificial 2D feature maps9
Performance evaluation of downhole oil–water separators in wells that use DWL technique using computational fluid dynamics: influence of velocities and flow rates9
Synthesis and application of eucalyptus plant- and walnut shell- CuO/Fe3O4/Xanthan polymeric nanocomposites for enhanced oil recovery in carbonate reservoirs9
Vertical height growth mechanism of hydraulic fractures in laminated shale oil reservoirs based on 3D discrete lattice modeling9
Organic richness and maturity modeling of cretaceous age Chichali shales for enhanced hydrocarbon exploration in Punjab platform, Pakistan8
Study of stress field induced by natural fracture and its influence on hydraulic fracture propagation8
The dynamic relationships among growth in the logistics industry, energy consumption, and carbon emission: recent evidence from China8
Stress field and safe drilling mud weights in the Shizigou salt system of Yingxiongling, Qaidam Basin, China8
Experimental design and manufacturing of a smart control system for horizontal separator based on PID controller and integrated production model8
Experimental evaluation of the water-based enhanced oil recovery methods in ultra-tight reservoirs8
Study on the synergistic phenomenon of oil–water–solid interface in high mineralization co-produced water system based on chelating agent mixed surfactant8
Investigation on the synergistic effect of pH and pyridinium-based ionic liquid on the wettability alteration of dolomite rock and IFT of formation brine/alkaline crude oil at the presence and absence8
Quantifying uncertainties of CO2-oil relative permeability and capillary pressure curves through automatic history matching core flood data8
Correction: A comprehensive analysis of transient rate and rate derivative data of an oil well intercepted by infinite-conductivity hydraulic fracture in closed systems8
Propagation pattern of cracks around a shale borehole via the cohesive element method8
Research on the rock-breaking mechanism and key factors influencing ROP enhancement during marble cutting with special-shaped PDC cutters8
Further study on oil/water relative permeability ratio model and waterflooding performance prediction model for high water cut oilfields sustainable development8
Mathematical model and its solution for water-altering-gas (WAG) injection process incorporating the effect of miscibility, gravity, viscous fingering and permeability heterogeneity8
Rate of penetration prediction in drilling operations: a comparative study of AI models and meta-heuristic approaches8
Modelling the transient effect in naturally fractured reservoirs8
Estimation of porosity and volume of shale using artificial intelligence, case study of Kashafrud Gas Reservoir, NE Iran8
Pore-type characterization of the Shurijeh formation in the Kopet-Dagh Basin, Northeastern Iran, using the integration of petrographic data, well logs, and production data8
Laboratory investigation on inhibition of polyvinyl alcohol used for wireline coring drilling8
Comparison of INPEFA technology and wavelet transform in sequence stratigraphic division of mixed reservoir: a case study of lower Es3 of KL oilfield in Laizhouwan Sag8
Study of borehole stability of volcanic rock formation with the influence of multiple factors8
Experimental study of the low salinity water injection process in the presence of scale inhibitor and various nanoparticles8
Multi-component induction logging response simulation and environmental factors analysis in complicated anisotropic formations8
Wear analysis and life prediction of sucker rod and tubing under ternary emulsion lubrication in Daqing oilfield: a case study in block H8
Interactions between Ca(OH)2, imidazolium ionic liquid, and titanium oxide nanoparticles using resinous and asphaltenic synthetic oils under high-salinity conditions7
Optimizing cluster spacing in multistage hydraulically fractured shale gas wells: balancing fracture interference and stress shadow impact7
Interfacial and mass transport phenomena in the tri-ethylene glycol-methane system at process conditions of natural gas dehydration7
Impact of karstification in trapping mechanisms of CO2 storage7
Depositional trends and reservoir geometries of the Early Cretaceous Lower Goru Formation in Lower Indus Basin, Pakistan: evidence from sequence stratigraphy7
A new practical method for reserve estimation and production forecast of gas wells exhibiting gas–water two-phase flow7
The new approach to establish a better match between obtained electrofacies and hydraulic flow units for oligo-Miocene reservoir rocks, North of Dezful Embayment, SW Iran7
Reservoir rock typing for optimum permeability prediction of Nubia formation in October Field, Gulf of Suez, Egypt7
Multi-scale digital rock-based sensitivity evaluation and optimization of stimulation strategies in tight sandstone reservoirs7
A review of basic well log interpretation techniques in highly deviated wells7
Geochemical characterisation and petroleum potential of selected cenozoic coals from Sarawak basin, Malaysia7
Assessing pore quality impact on saturation exponent and water saturation calculation7
Evaluating cementation factor for bioturbated sandstones, Bhuj Formation, Kachchh Basin, India: a novel approach using triple-porosity model7
A productivity equation of horizontal wells in the bottom water drive reservoir with an interlayer7
Prior assessment of CO2 leak rate through cracks sealed by nanoparticle gels7
Mechanisms of sand production, prediction–a review and the potential for fiber optic technology and machine learning in monitoring7
Evaluating modified zinc oxide nanoparticles for enhanced oil recovery: innovative approaches for optimizing their concentration under reservoir conditions7
Biomarkers geochemistry of the Alpagut oil shale sequence: an evaluation of dispositional environments and source rock potential from Dodurga-Çorum basin (N-Turkey)7
Factors and applications of carbon dioxide huff-and-puff technology in small toothbrush-shaped oil reservoirs7
Prediction of barium sulfate precipitation in dynamic tube blocking tests and its inhibition for waterflooding application using response surface methodology7
Experimental study on interlayer interference of coalbed methane reservoir under different reservoir physical properties and pressure systems7
Evaluation of zwitterionic and polymeric surfactant adsorption for enhanced oil recovery in sandstone reservoirs with high salinity conditions7
Novel calculation method to predict gas–water two-phase production for the fractured tight-gas horizontal well7
Rapid evaluation model for EOR techniques applicability of gas flooding, foam flooding and surfactant flooding based on modified fractional flow theory7
Formation mechanical mechanism of low-angle fractures in pre-salt carbonate reservoirs: a case study from Carboniferous KT-I formation of the NT oilfield in the eastern margin of the Precaspian Basin,7
A new approach to calculate CO2 displacement recovery considering near miscibility in tight oil reservoirs7
Experimental study on initiation and propagation of hydraulic fractures in stratified shale oil reservoirs7
Numerical simulation study on impact factors to dynamic filtration loss7
An integrated source rock potential, sequence stratigraphy, and petroleum geology of (Agbada-Akata) sediment succession, Niger delta: application of well logs aided by 3D seismic and basin modeling6
Regression modeling for laminar flow of herschel–barkley fluids in the concentric elliptical annulus6
A new comprehensive dimensionless inflow performance relationship for gas wells6
A review of tracer testing techniques in porous media specially attributed to the oil and gas industry6
Review of the productivity evaluation methods for shale gas wells6
Physical and chemical effect of impurities in carbon capture, utilisation and storage6
Quantitative characterization of igneous rock thermal effect on sandstone reservoir reconstruction based on heat conduction6
A geometric analysis-based approach toward mechanical analytics of multi-packer completion tubular string6
The effect of polypropylene fiber on the curing time of class G oil well cement and its mechanical, petrophysical, and elastic properties6
Flow unit classification and characterization with emphasis on the clustering methods: a case study in a highly heterogeneous carbonate reservoir, eastern margin of Dezful Embayment, SW Iran6
Building 1D and 3D static reservoir geomechanical properties models in the oil field6
Origin of organic matter input and paleoenvironmental conditions of the Late Cretaceous coal and carbonaceous shale deposits in the Canterbury Basin, New Zealand: prediction from the biomarker and car6
Petrophysical rock typing based on the digenetic effect of the different microfacies types of Abu Madi clastic reservoir in Faraskur Gas Field, onshore Nile Delta, Egypt6
Robust fracture intensity estimation from petrophysical logs and mud loss data: a multi-level ensemble modeling approach6
A review of cement sheath integrity evaluation techniques for carbon dioxide storage6
Analysis of changes in shale mechanical properties and fault instability activation caused by drilling fluid invasion into formations6
Durability of lightweight oil-well geopolymer system in sulfate environment6
Envelope-based constrained model for multiparameter pre-stack seismic inversion6
Evaluating the intake plugging effects on the electrical submersible pump (ESP) operating conditions using nodal analysis6
A review on application of nanoparticles for EOR purposes: history and current challenges6
A coupled thermal–hydrological–mechanical model for geothermal energy extraction in fractured reservoirs6
Synthesis, characterization and study of new surfactant nanocomposite as demulsifier to separate emulsions (W/O) in the petroleum industries6
Correction to: Rheological characterization of potassium carbonate deep eutectic solvent (DES) based drilling mud6
Study on the adsorption and deformation laws of multi-components in shale oil with nanopores——insights from the molecular simulation6
pH and ionic liquids impacts on SiO2-nanoparticles for surface phenomena modifications for heavy acidic crude oil6
Improving reservoir permeability by electric pulse controllable shock wave6
Dynamic data reconciliation with simultaneous time-varying parameter estimation in real time: application to an electric submersible pump lift oil production6
Feasibility analysis of commingle production of multi-layer reservoirs in the high water cut stage of oilfield development6
Analysis of foam-assisted lift effect and improvement measures in Sebei loose sandstone gas field6
Maximizing the capacity and benefit of CO2 storage in depleted oil reservoirs6
The socioeconomic factors of investment-induced petroleum consumption: case of fast developing Chinese economy6
Influencing factors and microscopic formation mechanism of phase transitions of microemulsion system6
Quantitative evaluation of water-alternative-natural gas flooding in enhancing oil recovery of fractured tight cores by NMR5
Interfacial tension of tri-ethylene glycol-water mixtures in carbon dioxide at elevated pressures5
Movable fluid distribution and controlling factors in upper paleozoic tight sandstone reservoirs: insights from the Shenmu Mizhi area5
A novel method for the 3D dynamic simulation of oil field station process flows5
Integrating inflow control valve control with LSTM networks for oil production forecasting in horizontal intelligent well application5
Research on the factors influencing the width of hydraulic fractures through layers5
Simulation of nuclear magnetic resonance response based on 3D CT images of sandstone core5
Impacts of diagenetic alterations on siliciclastic sediments of the pletmos basin: implications for reservoir quality5
Automatic arrival-time picking of P- and S-waves of micro-seismic events based on relative standard generative adversarial network and GHRA5
Utilizing nanomaterials to functionalize the Tikoua extract as a powerful green anti-corrosion inhibitor for carbon steel5
Construction of 2D and 3D rock physics templates for quantitative prediction of physical properties of a carbonate reservoir in SW of Iran5
Insights into the pore structure characteristics of the Lower Silurian Longmaxi Formation shale in the Jiaoshiba area, Southern Sichuan Basin, China5
Investigation on esterified pectin as natural hydrate inhibitor on methane hydrate formation5
Hybrid extreme learning machine for real-time rate of penetration prediction5
Riser and well casing analysis during drift-off: a coupled solution in the time domain5
Multi-criteria material selection for casing pipe in shale gas wells application5
Analysis of the impact of carbon dioxide on coal wettability and its primary mineral factors5
Identification of the low resistivity-low contrast (LRLC) gas-bearing pay zones in Shaly sand reservoirs using acoustic data: a case study from the Messinian Abu Madi formation, onshore Nile Delta, Eg5
Tight oil reservoir production characteristics developed by CO2 huff ‘n’ puff under well pattern conditions5
Research on key technology of packer rubber barrel for integrated fracturing and completion of gas well5
Numerical analysis of geomechanical behavior of fractures and faults in a deformable porous medium5
A comprehensive methodology for reservoir cut-off determination5
Electrical rock typing using Gaussian mixture model to determine cementation factor5
Effect of different injection fluids scenarios on swelling and migration of common clays in case of permeability variations: a micromodel study5
Determining the effect of mineral scaling formation under different injection water sources on the performance of Mishrif carbonate reservoir in Halfaya oilfield, Southern Iraq5
Effectiveness of embedded discontinuities technique in capturing geomechanical behavior in naturally fractured reservoirs5
0.08440089225769