Journal of Petroleum Exploration and Production Technology

Article	Citations
Relative permeability estimation using mercury injection capillary pressure measurements based on deep learning approaches	96
The control of effective source rocks on the distribution of hydrocarbon reservoirs in a lacustrine rift-basin: insights from a 3D basin modeling study	94
Experimental study on the impact of perpendicular and parallel bedding planes on the physical and geomechanical characteristics of carbonate rocks	93
A systematic review to identify carbonate rock exploration paradigms and examine current and future research directions: a case study at one of the southwest oil fields of Iran	70
Optimizing petrophysical property prediction in fluvial-deltaic reservoirs: a multi-seismic attribute transformation and probabilistic neural network approach	52
The migration mechanism of oil under natural depletion development for shale oil in Ordos Basin	51
Modelling the flowing bottom hole pressure of oil and gas wells using multivariate adaptive regression splines	40
The effect of gas and liquid phase composition on miscibility through interfacial tension measurements of model oils in compressed CO2	39
Influence of reservoir lithology on porous flow resistance of gas-bearing tight oil reservoirs and production forecast	37
Modelling of wax deposition for waxy crude oil by ANSYS fluent	37
Effect of SiO2 nanoparticles + 1-dodecyl-3-methyl imidazolium chloride on the IFT and wettability alteration at the presence of asphaltenic-synthetic oil	37
Analysis of reservoir rock permeability changes due to solid precipitation during waterflooding using artificial neural network	36
Enhancing hydraulic fracturing efficiency through machine learning	33
Intelligent characterization of ultra-deep carbonate strike-slip fault zones based on 3DResNeSt-UNet: a case study of the YueMan Block in the Tarim Basin	31
Recent advances in applications of green nanocomposites in enhanced oil recovery: a comprehensive review of different characterization methods and effective parameters	31
Paleogene lake deep water sedimentary facies in the northern zone of the Chezhen Sag, Bohai Bay Basin, China	30
Discrete fracture modeling by integrating image logs, seismic attributes, and production data: a case study from Ilam and Sarvak Formations, Danan Oilfield, southwest of Iran	28
Integrated fracture characterization of Asmari reservoir in Haftkel field	28
Rapid estimation of fracture half-length and fracture propagation-rate for individual hydraulic fracturing stages using post-frac-job reports: benchmark results from Eagle Ford case study well	26
Structural smoothing on mixed instantaneous phase energy for automatic fault and horizon picking: case study on F3 North Sea	26
Analysis of different objective functions in petroleum field development optimization	26
Analyzing in situ stresses and wellbore stability in one of the south Iranian hydrocarbon gas reservoirs	25
Geochemistry and petrology of selected sediments from Bukit Song, Miri, Sarawak, Malaysia, with emphasis on organic matter characterization	25
Development and field application of a jetting and helical combination tool	25
Determination of clay minerals using gamma ray spectroscopy for the Zubair Formation in Southern Iraq	25

Anaerobic activation of microorganisms indigenous to oil reservoirs to enhance oil recovery	24
Chemical enhanced oil recovery in carbonate oil reservoirs using a combination of zwitterionic and cationic surfactants in the presence of different salts	24
Modified Archie’s parameters for estimating water saturation for carbonate reservoir in north of Iraq	24
Stochastic-based liquid apparent permeability model of shale oil reservoir considering geological control	24
Stress field analysis and its effect on selection of optimal well trajectory in directional drilling (case study: southwest of Iran)	24
Transmission model of transient flow wave signal in intelligent layered water injection system	24
Sequence-variable attention temporal convolutional network for volcanic lithology identification based on well logs	24
Prediction of minimum miscibility pressure of CO2-oil systems using grey-box modeling for carbon dioxide capture, utilization, storage, and enhanced oil recovery	23
Simultaneous inversion of five physical parameters of submarine gas reservoir from synthetic elastic impedance for high-efficiency reserve evaluation	23
Energy recovery analysis through numerical simulations of steam injection in continental shale oil reservoirs	23
Analysis of foam-assisted lift effect and improvement measures in Sebei loose sandstone gas field	23
Multi-parameter modeling for prediction of gas–water production in tight sandstone reservoirs	22
Development and performance evaluation of foaming agent for heavy oil development and study on oil displacement mechanism in heterogeneous micromodel	22
Estimating shear wave in shale based on the variable critical porosity model	22
Review of underbalanced drilling techniques highlighting the advancement of foamed drilling fluids	21
Revolutionizing shale drilling with potassium chloride-based natural deep eutectic solvent as an additive	21
Application of maximum likelihood and model-based seismic inversion techniques: a case study from K-G basin, India	21
Retraction Note: Data-driven EUR for multistage hydraulically fractured wells in shale formation using different machine learning methods	20
A new insight into the evolution of the Qatar Arch to recognize faults and a new gas field	20
Numerical simulation of multi-field coupling in geothermal reservoir heat extraction of enhanced geothermal systems	20
Vertical height growth mechanism of hydraulic fractures in laminated shale oil reservoirs based on 3D discrete lattice modeling	20
Improving the in-situ upgrading of extra heavy oil using metal-based oil-soluble catalysts through oxidation process for enhanced oil recovery	20
Interfacial tension of tri-ethylene glycol-water mixtures in carbon dioxide at elevated pressures	20
Research and application of acid fracturing stimulation mechanism in ultra-deep subsalt dolomite reservoir in Tarim Basin	19
A geometric analysis-based approach toward mechanical analytics of multi-packer completion tubular string	19
Probabilistic assessment of equivalent fracture aperture constrained on quasi-real-time drilling mud loss data	19
Synthesis and application of eucalyptus plant- and walnut shell- CuO/Fe3O4/Xanthan polymeric nanocomposites for enhanced oil recovery in carbonate reservoirs	19
The socioeconomic factors of investment-induced petroleum consumption: case of fast developing Chinese economy	19
Lattice Boltzmann simulation of cross-linked polymer gel injection in porous media	19
Particle flow simulation of Brazilian splitting failure characteristics of layered shale	18
Sequence stratigraphy of the Eocene deep-water organic-rich mudstones in the Fushun Basin, Northeast China	17
Effect of direct current on gas condensate droplet immersed in brine solution	17
Development and field application of strongly resilient temporary plugging diversion agent for fracturing	17
Seismic velocity modeling in the digital transformation era: a review of the role of machine learning	17
Prediction of gas pressure in thin coal seams in the Qinglong Coal Mine in Guizhou Province, China	17
Experimental study on an eco-friendly gemini foaming agent for enhancing foam drilling applications	17
Application of benchtop humidity and temperature chamber in the measurement of water vapor sorption in US shales from Mancos, Marcellus, Eagle Ford and Wolfcamp formations	17
Coil optimization of ultra-deep azimuthal electromagnetic resistivity logging while drilling tool based on numerical simulation	16
A stacked generalization ensemble model for optimization and prediction of the gas well rate of penetration: a case study in Xinjiang	16
Characterization of a heterogeneous carbonate reservoir by integrating electrofacies and hydraulic flow units: a case study of Kangan gas field, Zagros basin	16
Energy storage systems for drilling rigs	16
Static reservoir modeling using stochastic method: a case study of the cretaceous sequence of Gamtoos Basin, Offshore, South Africa	16
Progress and development of particle jet drilling speed-increasing technology and rock-breaking mechanism for deep well	15
The potential of offshore Nile Delta Basin natural gas reserves: a case study of Messinian reservoir in Baltim field	15
Advances in critical temperature shift modeling of confined pure fluids using the Kihara potential function	15
Experimental study on the law of transitional gas flow in porous media	15
Electrically-enhanced THAI in situ combustion technology for upgrading and production of heavy oil	15
Fractal characteristics of artificially matured lacustrine shales from Ordos Basin, West China	15
Boltzmann transformation of radial two-phase black oil model for tight oil reservoirs	15
Correction to: Probabilistic estimation of hydraulic fracture half-lengths: validating the Gaussian pressure-transient method with the traditional rate transient analysis-method (Wolfcamp case study)	15

A new empirical model for predicting flue gas miscibility for light oils	15
Experimental approach for assessing filter-cake removability derived from reservoir drill-in fluids	15
Exploring the coupling relationship between hydrocarbon generation of continental shale and nanopore structure evolution—A case study of Shahejie formation in Bohai Bay Basin	15
Experimental investigation of the rock cutting process and derivation of the 3D spatial distribution of the formation strength using in-cutter sensing	15
Development of a novel packer fluid for high-temperature and high-pressure oil and gas wells with using design of experiments and artificial intelligence	14
A learning-from-data approach with soft clustering and path relinking to the history-matching problem	14
Correction to: Lithology and fluid discrimination using rock physics-based modified upper Hashin–Shtrikman bound: an example from onshore Niger Delta Basin	14
The study on experimental method of fluid stress sensitivity of low permeability in tight reservoir	14
Experimental investigation of chemical solutions effects on wettability alteration and interfacial tension reduction using nano-alkaline–surfactant fluid: an EOR application in carbonate reservoirs	14
Automated real-time prediction of geological formation tops during drilling operations: an applied machine learning solution for the Norwegian Continental Shelf	14
Derivation of water flooding characteristic curve for offshore low-amplitude structural reservoir with strong bottom water	14
Incremental and acceleration production estimation and their effect on optimization of well infill locations in tight gas reservoirs	14
Pore pressure prediction using seismic acoustic impedance in an overpressure carbonate reservoir	13
Investigating the effect of perlite particles on ilmenite-based oil well cement	13
The role of stylolites as a fluid conductive, in the heterogeneous carbonate reservoirs	13
Assessing the viability of different bio-polymers and synthetic-copolymers with modified enzyme-induced carbonate precipitation solutions for sand consolidation applications	13
A critical review on optimization parameters and techniques for gas pipeline operation profitability	13
Condensation distribution and evolution characteristics of water vapor in annulus of flexible riser	13
Differences in reservoir quality within distributary channel belts at the braided river delta front in the Xinchang area of Western Sichuan’s 2nd member of the Xujiahe Formation: genesis and implicati	13
Factors influencing hydrogen peroxide decomposition dynamics for thermochemical treatment of bottomhole zone	13
An analytical model for pressure behavior in multilayered radially composite reservoir with formation crossflow	13
Inhibiting wax deposition using palm oil additives	12
Experimental study on production performance and reserves utilization law in carbonate gas reservoirs	12
Wettability evaluation of shale oil reservoirs and its impact on the post-fracturing shut-in duration of horizontal wells: a quantitative study for Ordos Basin, NW China	12
Oil utilization degree at various pore sizes via different displacement methods	12
Laboratory study of plugging mechanism and seal integrity in fractured formations using a new blend of lost circulation materials	12
High-resolution pressure transducer design and associated circuitry to build a network-ready smart sensor for distributed measurement in oil and gas production wells	12
Modal state vectors of a free-hanging drilling riser during deployment and retrieval	12
State of the art of advanced spectral noise and high-precision temperature logging technology utilization in Iraqi oil fields: an integration approach to diagnose wells performance complications	12
A new workflow for warning and controlling the water invasion	11
Geochemical characteristics and oil–oil correlation of the upper Cretaceous oils from the Iranian part of the Persian Gulf Basin	11
A comprehensive method for determining the dewaxing interval period in gas lift wells	11
Calculation method of equivalent permeability of dual-porosity media considering fractal characteristics and fracture stress sensitivity	11
Anisotropy of surface morphology of carbonate rocks after reaction with acid	11
Delineating the main structural outlines and the petrophysical properties of the Albian-upper Cretaceous Reservoirs using seismic and well log data, Shushan Basin, north Western Desert, Egypt	11
Investigation of the confinement effect on fluid-phase behavior in shale oil reservoirs during CO2 injection process	11
Evaluating the intake plugging effects on the electrical submersible pump (ESP) operating conditions using nodal analysis	11
An evolutionary optimization approach to prevent electronics burnout in subsea oil and gas equipment	11
Application of artificial intelligence to predict rock strength and drilling efficiency using in-cutter sensing data and vibration modes	11
Correction: Basin margin sediment wedge build out of the Eastern Niger Delta: application of shelf-edge trajectory pattern studies	11
Polysaccharides from Tamarindus indica L. as natural kinetic hydrates inhibitor at high subcooling environment	11
Prediction of wellbore sand production potential from analysis of petrophysical data coupled with field stress: a case study from the Shah-Deniz gas field (Caspian Sea Basin)	11
Enhancing predictive maintenance strategies for oil and gas equipment through ensemble learning modeling	11
A new integrated HPHT experimental apparatus to measure interfacial tension, swelling factor, and viscosity simultaneously	10
Application of digital rock technology for formation damage evaluation in tight sandstone reservoir	10
Numerical approach on production optimization of high water-cut well via advanced completion management using flow control valves	10
Hydrocarbon source rocks in Kazhdumi and Pabdeh formations—a quick outlook in Gachsaran oilfield, SW Iran	10
Tight oil reservoir production characteristics developed by CO2 huff ‘n’ puff under well pattern conditions	10
Upper limit estimate to wellhead flowing pressure and applicable gas production for a downhole throttling technique in high-pressure–high-temperature gas wells	10
Correction to: A solution for funding the development of technology in oilwell drilling	10
Influence of alkyl chain length in ionic liquid based drilling mud for rheology modification: a review	10
Prediction of permeability of highly heterogeneous hydrocarbon reservoir from conventional petrophysical logs using optimized data-driven algorithms	10
Evaluation of anionic and non-ionic surfactant performance for Montney shale gas hydraulic fracturing fluids	10
Maximizing efficiency and uniformity in SAGD steam circulation through effect of heat convection	10
Petrophysical evaluation of sandstone gas reservoir using integrated well logs and core data for the Lower Cretaceous Kharita formation, Western Desert, Egypt	10
Detailed investigations of the influence of catalyst packing porosity on the performance of THAI-CAPRI process for in situ catalytic upgrading of heavy oil and bitumen	10
Casing tensile stress distribution in the bending section of a well during hydraulic fracturing	10
Integrated wellbore-reservoir modeling based on 3D Navier–Stokes equations with a coupled CFD solver	9
Factors affecting casing equivalent stress in multi-cluster fracturing of horizontal shale gas wells: finite element study on Weirong Block, southern Sichuan Basin, China	9
Study of accelerated erosion of elbow-shaped connections with corrosion defects	9
Discussion “Structural analysis and seismic stratigraphy for delineation of Neoproterozoic–Cambrian petroleum system in central and eastern part of Bikaner–Nagaur basin, India” by A. Mandal, D. Saha a	9
Optimal operation of a multi-distribution natural gas pipeline grid: an ant colony approach	9
Impact of rock mineralogy on reactive transport of CO2 during carbon sequestration in a saline aquifer	9
Experimental study of CO2 injectivity impairment in sandstone due to salt precipitation and fines migration	9
Determination of the mud weight window, optimum drilling trajectory, and wellbore stability using geomechanical parameters in one of the Iranian hydrocarbon reservoirs	9
Investigating the effect of TiO2-based nanofluids in the stability of crude oil flow: parametric analysis and Gaussian process regression modeling	9
Research progress and prospect of Ordovician carbonate rocks in Tahe oilfield: karst feature	9
Application of machine learning to determine the shear stress and filtration loss properties of nano-based drilling fluid	9
The Fourier transform infrared spectroscopy (FTIR) analysis for the clay mineralogy studies in a clastic reservoir	9
Estimating electrical resistivity from logging data for oil wells using machine learning	9
Fractured reservoir distribution characterization using folding mechanism analysis and patterns recognition in the Tabnak hydrocarbon reservoir anticline	9
The effect of forces affecting the spread of oil droplets on a rock surface	9
A review on the applications of nuclear magnetic resonance (NMR) in the oil and gas industry: laboratory and field-scale measurements	9
Active learning based surrogate ensemble assisted multi-objective optimization framework for reservoir water-flooding optimization	8
Investigation on the effect of CuO nanoparticles on the IFT and wettability alteration at the presence of [C12mim][Cl] during enhanced oil recovery processes	8
Artificial intelligence in geoenergy: bridging petroleum engineering and future-oriented applications	8
Retraction Note: Improvement of seismic data quality and recognition of fault discontinuities through seismic data conditioning applications: a case study of Issaran oil field, Gulf of Suez, Egypt	8
Shale gas: a step toward sustainable energy future	8
Nanoparticles in enhanced oil recovery: state-of-the-art review	8
Learning-based pattern-data-driven forecast approach for predicting future well responses	8

Design of water nozzle shape and structure optimization for eccentric injection mandrel in water injection wells	8
Logging evaluation on mechanical-damage characteristics of the vicinity of the wellbore in tight reservoirs	8
New approach of evaluating fracturing interference based on wellhead pressure monitoring data: a case study from the well group-A of Fuling shale gas field	8
Structural analysis and seismic stratigraphy for delineation of Neoproterozoic-Cambrian petroleum system in central and eastern part of Bikaner–Nagaur basin, India	8
Numerical investigation of acid diversion using viscoelastic surfactant (VES) under single and two-phase flow conditions	8
Analytical solution to pressure transient analysis in non-Newtonian/Newtonian fluids in naturally fractured composite reservoirs	8
An innovative approach for investigation of overpressure due to hydrocarbon generation: a regional study on Kazhdumi formation, South-western Zagros Basin, Iran	8
Study on separation factor models for well anti-collision analysis	8
Characteristics and controlling factors of Lucaogou formation shale reservoir in the northern edge of Bogda Mountain, the Junggar Basin, China	7
PTA-metrics for time-lapse analysis of well performance	7
Integrated workflow to investigate the fracture interference effect on shale well performance	7
Reservoir characterization and identification of new prospect in Srikail gas field using wireline and seismic data	7
Reactive transport modeling of scale precipitation and deposition during incompatible water injection in carbonate reservoirs	7
Quantitative characterization of pore network and influencing factors of methane adsorption capacity of transitional shale from the southern North China Basin	7
Characterization of wellbore asphaltene deposition in well Gaotan-1 in Junggar Basin, China	7
Prediction and analysis of annular pressure caused by temperature effect for HP/HT/HHS and water production gas wells in Sichuan Basin	7
Automatic arrival-time picking of P- and S-waves of micro-seismic events based on relative standard generative adversarial network and GHRA	7
AI/ML assisted shale gas production performance evaluation	7
Prediction of proppant distribution as a function of perforation orientations	7
Dual-phase flow in two-layer porous media: a radial composite Laplace domain approximation	7
Effect of equilibrium contact angle on water equilibrium film thickness for the carbon dioxide–brine–mineral system based on surface force theory	7
Suitability of water treatment chemicals in the remediation of produced water: a data-driven approach	7
Prospect evaluation based on integrated petroleum system analysis: Block E case study, south-eastern edge of Precaspian Basin (Kazakhstan)	7
A comprehensive analysis of transient rate and rate derivative data of an oil well intercepted by infinite-conductivity hydraulic fracture in closed systems	7
Improving drilling hydraulics estimations-a case study	7
Effectiveness of embedded discontinuities technique in capturing geomechanical behavior in naturally fractured reservoirs	7
Simulation of nuclear magnetic resonance response based on 3D CT images of sandstone core	7
Reservoir characterization and volumetric estimation of reservoir fluids using simulation and analytical methods: a case study of the coastal swamp depobelt, Niger Delta Basin, Nigeria	7
The effect of gravity drainage mechanism on oil recovery by reservoir simulation; a case study in an Iranian highly fractured reservoir	7
Integrated 3D geomechanical characterization of a reservoir: case study of "Fuja" field, offshore Niger Delta, Southern Nigeria	7
Coupled hydro-mechanical simulation in the carbonate reservoir of a giant oil field in southwest Iran	7
The influence of fracturing fluid temperature and viscosity on the migration and distribution of proppants within a fracture	7
The rheological behavior of crude oil in the presence of palm oil additives	7
New correlations to estimate the rough fracture permeability using computational fluid dynamics simulation	7
Post-drill geophysical characterization of two deep-water wells of Cauvery Basin, East Coast of India	7
An integrated approach of reservoir characterization of Y gas field in Central Bredasdorp Basin, South Africa	7
Mechanistic study of nanoparticles-assisted xanthan gum polymer flooding for enhanced oil recovery: a comparative study	7
Numerical simulation of proppant embedment in rough surfaces based on full reverse reconstruction	7
Synthesis, characterization and evaluation of stearyl acrylate-co-behenyl acrylate copolymer as a pour point depressant of waxy crude oil	7
Correction: Application of downhole throttling technology to mitigate sustained casing pressure	7
Static and dynamic evaluation of formation damage due to barium sulfate scale during water injection in carbonate reservoirs	7
Primary studies on the effect of coal bio-gasification in situ in the Qinshui basin	7
A study on cashew nut shell liquid as a bio-based flow improver for heavy crude oil	7
Identification of best fit crude oil of upper Assam basin for pipeline transportation	7
Experimental study of effective compounds in a smart water injection process	6
Surface mapping, structural modelling and kinematics along the sinistral strike-slip fault zone, NE Potwar, Pakistan	6
Sweet spots prediction through fracture genesis using multi-scale geological and geophysical data in the karst reservoirs of Cambrian Longwangmiao Carbonate Formation, Moxi-Gaoshiti area in Sichuan Ba	6
Design method and application of accurate adjustment scheme for water injection wells around adjustment wells	6
Investigating the vaporization mechanism's effect on interfacial tension during gas injection into an oil reservoir	6
Optimization of CO2 EOR and geological sequestration in high-water cut oil reservoirs	6
Insights into the pore structure characteristics of the Lower Silurian Longmaxi Formation shale in the Jiaoshiba area, Southern Sichuan Basin, China	6
Numerical experimental study on the fracture process of shale containing internal prefabricated cracks based on CT scanning with different quartz contents	6
Pore pressure prediction in Niger Delta high pressure, high temperature (HP/HT) domains using well logs and 3D seismic data: a case study of X-field, onshore Niger Delta	6
Application of machine and deep learning techniques to estimate NMR-derived permeability from conventional well logs and artificial 2D feature maps	6
Tight carbonate gas well deliverability evaluation and reasonable production proration analysis	6
Geostatic modeling of the clastic reservoir: a case study the Late Cenomanian Abu Roash G Member, Hamra Field, Abu Gharadig Basin, Western Desert, Egypt	6
Pressure and reciprocal rate transient analysis for finite-conductivity vertical fractured hydrocarbon wells under trilinear flow	6
Geological characteristics and coalbed methane adsorbability of shallow coal rock in Qinshui Basin, China	6
Multiple linear regression and gene expression programming to predict fracture density from conventional well logs of basement metamorphic rocks	6
Sand-mudstone modeling of fluvial fan sedimentary facies: a case study of Shanxi Formation reservoir in Ordos Basin	6
Effects of miscible CO2 injection on production recovery	6
Study on the influencing factors of imbibition in tight reservoirs based on molecular dynamics simulation	6
Performance of asphaltene stability predicting models in field environment and development of new stability predicting model (ANJIS)	6
Geologically based integrated approach for zonation of a Late Jurassic–Early Cretaceous carbonate reservoir; a case from Persian Gulf	6
Characteristics and influencing factors of Cretaceous reservoir in eastern depression of North Yellow Sea basin	6
Separation characteristics and structure optimization of double spherical tangent double-field coupling demulsifier	6
Sub-basalt hydrocarbon prospect assessment in Peninsular India using seaward dipping reflectors	6
Determining the effect of mineral scaling formation under different injection water sources on the performance of Mishrif carbonate reservoir in Halfaya oilfield, Southern Iraq	6
Developing a new approach for the anticipation of subsurface pressure in three oil wells from various fields in Iraq	6
Significance of petroleum seepages in hydrocarbon exploration-case study of Khourian Desert, Central Iran	6