OOIR: Observatory of International Research

Papers

(The TQCC of Beilstein Journal of Nanotechnology is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)

Article	Citations
Impact of GaAs(100) surface preparation on EQE of AZO/Al₂O₃/p-GaAs photovoltaic structures	135
Effect of lubricants on the rotational transmission between solid-state gears	107
Classification and application of metal-based nanoantioxidants in medicine and healthcare	43
Solution combustion synthesis of a nanometer-scale Co₃O₄ anode material for Li-ion batteries	43
A chemiresistive sensor array based on polyaniline nanocomposites and machine learning classification	43
Investigation of a memory effect in a Au/(Ti–Cu)Ox-gradient thin film/TiAlV structure	35
Rapid and sensitive detection of box turtles using an electrochemical DNA biosensor based on a gold/graphene nanocomposite	30
Green SPIONs as a novel highly selective treatment for leishmaniasis: an in vitro study against Leishmania amazonensis intracellular amastigotes	28
A photonic crystal material for the online detection of nonpolar hydrocarbon vapors	27
Criteria ruling particle agglomeration	26
Determining by Raman spectroscopy the average thickness and N-layer-specific surface coverages of MoS₂ thin films with domains much smaller than the laser spot size	26
Fabrication and testing of polymer microneedles for transdermal drug delivery	25
Multiscale modelling of biomolecular corona formation on metallic surfaces	25
Spatial variations of conductivity of self-assembled monolayers of dodecanethiol on Au/mica and Au/Si substrates	25
Nanoarchitectonics for advanced applications in energy, environment and biology: Method for everything in materials science	24
Introducing third-generation periodic table descriptors for nano-qRASTR modeling of zebrafish toxicity of metal oxide nanoparticles	24
Dry under water: air retaining properties of large-scale elastomer foils covered with mushroom-shaped surface microstructures	23
TiO₂ immobilized on 2D mordenite: effect of hydrolysis conditions on structural, textural, and optical characteristics of the nanocomposites	22
Clays enhanced with niobium: potential in wastewater treatment and reuse as pigment with antibacterial activity	21
Structural studies and selected physical investigations of LiCoO₂ obtained by combustion synthesis	20
Probing the potential of rare earth elements in the development of new anticancer drugs: single molecule studies	20
Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration	19
Local stiffness and work function variations of hexagonal boron nitride on Cu(111)	19
Effects of drug concentration and PLGA addition on the properties of electrospun ampicillin trihydrate-loaded PLA nanofibers	19
Orientation-dependent photonic bandgaps in gold-dust weevil scales and their titania bioreplicates	19

Two dynamic modes to streamline challenging atomic force microscopy measurements	19
Interfacial nanoarchitectonics for ZIF-8 membranes with enhanced gas separation	18
Photocatalytic methane oxidation over a TiO₂/SiNWs p–n junction catalyst at room temperature	16
Ca_n neutral clusters: a two-step G₀W₀ and DFT benchmark	16
Role of titanium and organic precursors in molecular layer deposition of “titanicone” hybrid materials	16
Natural nanofibers embedded in the seed mucilage envelope: composite hydrogels with specific adhesive and frictional properties	16
A TiO₂@MWCNTs nanocomposite photoanode for solar-driven water splitting	15
A cantilever-based, ultrahigh-vacuum, low-temperature scanning probe instrument for multidimensional scanning force microscopy	15
Graphene removal by water-assisted focused electron-beam-induced etching – unveiling the dose and dwell time impact on the etch profile and topographical changes in SiO₂ substrates	15
High-yield synthesis of silver nanowires for transparent conducting PET films	15
AI-assisted models to predict chemotherapy drugs modified with C₆₀ fullerene derivatives	15
Directed growth of quinacridone chains on the vicinal Ag(35 1 1) surface	15
Elasticity, an often-overseen parameter in the development of nanoscale drug delivery systems	15
Self-assembly of Eucalyptus gunnii wax tubules and pure ß-diketone on HOPG and glass	15
Quantitative dynamic force microscopy with inclined tip oscillation	14
Design, fabrication, and characterization of kinetic-inductive force sensors for scanning probe applications	14
Assessment of the optical and electrical properties of light-emitting diodes containing carbon-based nanostructures and plasmonic nanoparticles: a review	14
Coherent amplification of radiation from two phase-locked Josephson junction arrays	14
A comprehensive review on electrospun nanohybrid membranes for wastewater treatment	13
Experimental investigation of usage of POE lubricants with Al₂O₃, graphene or CNT nanoparticles in a refrigeration compressor	13
Hierarchically patterned polyurethane microgrooves featuring nanopillars or nanoholes for neurite elongation and alignment	13
Measurements of dichroic bow-tie antenna arrays with integrated cold-electron bolometers using YBCO oscillators	12
A review on the structural characterization of nanomaterials for nano-QSAR models	12
Quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles: one-pot synthesis, characterization, and anticancer and antibacterial activities	12
Effects of focused electron beam irradiation parameters on direct nanostructure formation on Ag surfaces	11
A mid-infrared focusing grating coupler with a single circular arc element based on germanium on silicon	11
Application of nanoarchitectonics in moist-electric generation	11
Nanoscale friction and wear of a polymer coated with graphene	11
Green synthesis of silver nanoparticles derived from algae and their larvicidal properties to control Aedes aegypti	10
Controllable physicochemical properties of WO_x thin films grown under glancing angle	10
Antibacterial activity of a berberine nanoformulation	10
A Au/CuNiCoS₄/p-Si photodiode: electrical and morphological characterization	10
The role of convolutional neural networks in scanning probe microscopy: a review	10
High–low Kelvin probe force spectroscopy for measuring the interface state density	10
Polymer nanoparticles from low-energy nanoemulsions for biomedical applications	10
Engineered titania nanomaterials in advanced clinical applications	10
Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review	9
Recent progress in cancer cell membrane-based nanoparticles for biomedical applications	9
Ultrafast signatures of magnetic inhomogeneity in Pd₁₋_xFe_x (x ≤ 0.08) epitaxial thin films	9
DNA aptamer selection and construction of an aptasensor based on graphene FETs for Zika virus NS1 protein detection	9
Nickel nanoparticle-decorated reduced graphene oxide/WO₃ nanocomposite – a promising candidate for gas sensing	9
Electromigration-induced formation of percolating adsorbate islands during condensation from the gaseous phase: a computational study	9
Silver nanoparticles loaded on lactose/alginate: in situ synthesis, catalytic degradation, and pH-dependent antibacterial activity	9
Polymer lipid hybrid nanoparticles for phytochemical delivery: challenges, progress, and future prospects	8
Intermixing of MoS₂ and WS₂ photocatalysts toward methylene blue photodegradation	8
Effect of additives on the synthesis efficiency of nanoparticles by laser-induced reduction	8
Mechanistic insights into endosomal escape by sodium oleate-modified liposomes	8
Gold nanomakura: nanoarchitectonics and their photothermal response in association with carrageenan hydrogels	8
Design and selection of peptides to block the SARS-CoV-2 receptor binding domain by molecular docking	8
Recent advances in green carbon dots (2015–2022): synthesis, metal ion sensing, and biological applications	8

The role of sulfonate groups and hydrogen bonding in the proton conductivity of two coordination networks	8
Potential of a deep eutectic solvent in silver nanoparticle fabrication for antibiotic residue detection	8
Heterogeneous reactions in a HFCVD reactor: simulation using a 2D model	7
Upper critical magnetic field in NbRe and NbReN micrometric strips	7
Vortex lattices of layered HTSCs at different vortex–vortex interaction potentials	7
Various CVD-grown ZnO nanostructures for nanodevices and interdisciplinary applications	7
Determining amplitude and tilt of a lateral force microscopy sensor	7
Mixed oxides with corundum-type structure obtained from recycling can seals as paint pigments: color stability	7
Properties of tin oxide films grown by atomic layer deposition from tin tetraiodide and ozone	7
The role of a tantalum interlayer in enhancing the properties of Fe₃O₄ thin films	7
Two-step single-reactor synthesis of oleic acid- or undecylenic acid-stabilized magnetic nanoparticles by thermal decomposition	7
Bolometric IR photoresponse based on a 3D micro-nano integrated CNT architecture	7
Pulsed laser in liquid grafting of gold nanoparticle–carbon support composites	7
Simultaneous electrochemical determination of uric acid and hypoxanthine at a TiO₂/graphene quantum dot-modified electrode	6
Impact of electron–phonon coupling on electron transport through T-shaped arrangements of quantum dots in the Kondo regime	6
Roll-to-roll fabrication of superhydrophobic pads covered with nanofur for the efficient clean-up of oil spills	6
Bacterial safety study of the production process of hemoglobin-based oxygen carriers	6
Reconstruction of a 2D layer of KBr on Ir(111) and electromechanical alteration by graphene	6
Assessing phytotoxicity and tolerance levels of ZnO nanoparticles on Raphanus sativus: implications for widespread adoptions	6
Synthesis of silver–palladium Janus nanoparticles using co-sputtering of independent sources: experimental and theorical study	6
Plasma modes in capacitively coupled superconducting nanowires	6
Enhancement of the piezoelectric coefficient in PVDF-TrFe/CoFe₂O₄ nanocomposites through DC magnetic poling	6
Structural and optical characteristics determined by the sputtering deposition conditions of oxide thin films	6
Green synthesis of carbon dot structures from Rheum Ribes and Schottky diode fabrication	6
Radiofrequency enhances drug release from responsive nanoflowers for hepatocellular carcinoma therapy	6
Suspension feeding in Copepoda (Crustacea) – a numerical model of setae acting in concert	6
Signal generation in dynamic interferometric displacement detection	5
Exfoliation of titanium nitride using a non-thermal plasma process	5
Reliable fabrication of transparent conducting films by cascade centrifugation and Langmuir–Blodgett deposition of electrochemically exfoliated graphene	5
A broadband detector based on series YBCO grain boundary Josephson junctions	5
Nanoarchitectonics of the cathode to improve the reversibility of Li–O₂ batteries	5
Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays	5
Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride	5
Hydroxyapatite–bioglass nanocomposites: Structural, mechanical, and biological aspects	5
Relationship between corrosion and nanoscale friction on a metallic glass	5
Bioselectivity of silk protein-based materials and their bio-inspired applications	5
The effect of cobalt on morphology, structure, and ORR activity of electrospun carbon fibre mats in aqueous alkaline environments	5
Orally administered docetaxel-loaded chitosan-decorated cationic PLGA nanoparticles for intestinal tumors: formulation, comprehensive in vitro characterization, and release kinetics	5
Aero-ZnS prepared by physical vapor transport on three-dimensional networks of sacrificial ZnO microtetrapods	5
Sulfur nanocomposites with insecticidal effect for the control of Bactericera cockerelli	5
Stimuli-responsive polypeptide nanogels for trypsin inhibition	5
Numerical modeling of a multi-frequency receiving system based on an array of dipole antennas for LSPE-SWIPE	5
Low-energy electron interaction and focused electron beam-induced deposition of molybdenum hexacarbonyl (Mo(CO)₆)	5
Influence of conductive carbon and MnCo₂O₄ on morphological and electrical properties of hydrogels for electrochemical energy conversion	4
Uniform arrays of gold nanoelectrodes with tuneable recess depth	4
Biomimetic nanocarriers: integrating natural functions for advanced therapeutic applications	4
Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material	4
Investigating ripple pattern formation and damage profiles in Si and Ge induced by 100 keV Ar⁺ ion beam: a comparative study	4
Effect of repeating hydrothermal growth processes and rapid thermal annealing on CuO thin film properties	4
A stretchable triboelectric nanogenerator made of silver-coated glass microspheres for human motion energy harvesting and self-powered sensing applications	4
Spatial mapping of photovoltage and light-induced displacement of on-chip coupled piezo/photodiodes by Kelvin probe force microscopy under modulated illumination	4
Electrocatalytic oxygen reduction activity of AgCoCu oxides on reduced graphene oxide in alkaline media	4
Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis	4
A multi-resistance wide-range calibration sample for conductive probe atomic force microscopy measurements	4
Local work function on graphene nanoribbons	4
Fluorescent bioinspired albumin/polydopamine nanoparticles and their interactions with Escherichia coli cells	4
In situ transport characterization of magnetic states in Nb/Co superconductor/ferromagnet heterostructures	4
Surface-enhanced Raman scattering of water in aqueous dispersions of silver nanoparticles	4
A biomimetic approach towards a universal slippery liquid infused surface coating	4
Solar-light-driven LaFe_xNi₁₋_xO₃ perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants	4
Spin dynamics in superconductor/ferromagnetic insulator hybrid structures with precessing magnetization	4
Electrical and optical enhancement of ITO/Mo bilayer thin films via laser annealing	4
A novel approach to pulsed laser deposition of platinum catalyst on carbon particles for use in polymer electrolyte membrane fuel cells	4
Selected properties of Al_xZn_yO thin films prepared by reactive pulsed magnetron sputtering using a two-element Zn/Al target	4
Comparing the performance of single and multifrequency Kelvin probe force microscopy techniques in air and water	4
Design of surface nanostructures for chirality sensing based on quartz crystal microbalance	4
Superconducting spin valve effect in Co/Pb/Co heterostructures with insulating interlayers	4
Surfactant-free syntheses and pair distribution function analysis of osmium nanoparticles	4
Stability and activity of platinum nanoparticles in the oxygen electroreduction reaction: is size or uniformity of primary importance?	4
Recent progress in magnetic applications for micro- and nanorobots	4
Direct electron beam writing of silver using a β-diketonate precursor: first insights	4
Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots	4
Ion beam processing of DNA origami nanostructures	4
Modulated critical currents of spin-transfer torque-induced resistance changes in NiCu/Cu multilayered nanowires	4
Exploring disorder correlations in superconducting systems: spectroscopic insights and matrix element effects	4
AFM-IR investigation of thin PECVD SiO_x films on a polypropylene substrate in the surface-sensitive mode	4
Spindle-like MIL101(Fe) decorated with Bi₂O₃ nanoparticles for enhanced degradation of chlortetracycline under visible-light irradiation	4
Bending and punching characteristics of aluminum sheets using the quasi-continuum method	4
Out-of-plane polarization induces a picosecond photoresponse in rhombohedral stacked bilayer WSe₂	4
Vinorelbine-loaded multifunctional magnetic nanoparticles as anticancer drug delivery systems: synthesis, characterization, and in vitro release study	4