Energy Technology

Papers
(The TQCC of Energy Technology is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Masthead138
Exploring the Thermal Potential of Shape Stabilized Graphene Nano Platelets Enhanced Phase Change Material for Thermal Energy Storage113
Modeling Transformation Pathways of European Final Energy Consumption in the Transport and Buildings Sector Using Country Clustering72
Different Risks—Different Views: How Hydrogen Infrastructure Is Linked to Societal Risk Perception72
Guidance for the Sustainable and Long‐term Use of LNG Terminal Sites as Logistics Hubs for Hydrogen and Its Derivatives66
Simple Smoothing of the Bottom Silicon Surface Using Wet Chemical Etching Methods for Epitaxial III‐V/Silicon Tandem Manufacturing62
Identification of Cause–Effect Relationships between Process Parameters and the Film Formation in the Semidry Electrode Production for Lithium‐Ion Batteries59
Non‐Electron Withdrawing Unit Copolymerization to Enhance Photo‐Stability of Thiophene‐Based Organic Solar Cells58
Preparing Li6V3(PO4)5 Cathode with Boron‐Doped Carbon Layer as a Cathode Material for Lithium‐Ion Batteries56
Hydrothermal Synthesis of (NH4)2V7O16/Reduced Graphene Oxide Composite with Enhanced Storage Performance for Aqueous Lithium‐Ion Batteries55
High‐Throughput Indirect Gravure Printing Applied to Low‐Temperature Metallization of Silicon‐Based High‐Efficiency Solar Cells55
A Bidirectional T‐Shaped Energy Harvester: Modeling, Simulation, and Experiment55
Metal‐Organic Framework/Graphene Nanoplatelet Composite Increases Rate Performance of Lithium–Sulfur Batteries53
Electrochemical CO2 Reduction on Copper in Propylene Carbonate: Influence of Water Content and Temperature on the Product Distribution52
Energy Yield Modeling of Perovskite–Silicon Tandem Photovoltaics: Degradation and Total Lifetime Energy Yield50
Necklace‐Like Sn@C Fiber Self‐Supporting Electrode for High‐Performance Sodium‐Ion Battery48
Tailored Digitalization in Electrode Manufacturing: The Backbone of Smart Lithium‐Ion Battery Cell Production46
Advances in Understanding Carbon Composite Catalysts Based on Cathode for Microbial Fuel Cells46
Masthead43
43
A Computational Fluid Dynamics–Discrete Element Method Model for Physics‐Based Simulation of Structure Formation during Battery Electrode Drying42
Structure Optimization of Hydrogen‐Fueled Multiple Direct‐Injection Trapped Vortex Combustor Using Response Surface Method41
Masthead40
Rational Design of Facile and Low‐Cost Construction of Carbon‐Based Dye‐Sensitized Solar Cells using Garcinia Mangostana L. as a Photosensitizer39
Vertically Aligned MoS2 Nanosheets with Increased Interlayer Spacing on Hollow Polypyrrole Nanotubes for Enhanced Lithium and Sodium Storage Performance38
Masthead37
Performance Analysis of Cement Plant Waste‐Heat Recovery for Power Generation Based on Partial Evaporating Cycle with Ejector37
36
Harmonizing Efficiency and Bending Performance in Flexible Perovskite Solar Cells through Annealing Duration Optimization36
A Simple Preparation Method of Reduced Graphene Oxide‐Incorporated BiVO4 Loaded with CoOx Composites and Application to Z‐Schematic Water Splitting under Visible Light Irr34
Masthead34
Optimizing Methanol Reforming Parameters for Enhanced Hydrogen Selectivity in an Aspen Hysys Simulator using Response Surface Methodology34
Production of Nickel‐Rich Cathodes for Lithium‐Ion Batteries from Lab to Pilot Scale under Investigation of the Process Atmosphere33
Development of Finite‐Element Model for Drying of Tomato Flakes under Passive Greenhouse Dryer: Experimental Validation and Optimization Potential32
Highly Efficient 3D Evaporator for Interfacial Solar Steam Generation and Wastewater Treatment32
Unleashing the Power of Plasma and Flow: A Novel Cold Plasma‐Oscillatory System for Enhanced Continuous Biodiesel Production from Sunflower Oil31
Rechargeable Aluminum‐Air Batteries Based on Aqueous Solid‐State Electrolytes31
Antimony Sulfoiodide‐Based Energy Harvesting and Self‐Powered Temperature Detection31
Facile and Surfactant‐Free Routed Spherical Au@Pt Core–Shell–Satellite Nanoparticles as High‐Efficient and Stable Electrocatalyst for Methanol Oxidation31
Photothermal Energy‐Storage Capsule with Sustainable Evaporation for Efficient Anti‐/Deicing31
Low‐Temperature Electrochemical Ammonia Synthesis: Measurement Reliability and Comparison to Haber–Bosch in Terms of Energy Efficiency31
Designing a Cost‐Effective and Sustainable Process for the Efficient Production of Planar Anode‐Supported Solid Oxide Fuel Cells31
Experimental Study of Reverse Flow Solar Air Heater Having Perforation and Delta Wing on Absorber Plate30
State of Health Estimation and Remaining Useful Life Prediction for Lithium‐Ion Batteries Based on Partial Differential Thermal Voltammetry Curve30
Influence of Silicon Oxide Processes on the Performance of Copper Indium Gallium Selenide Flexible Solar Cells29
Chrysanthemum‐Flowers‐Like Bimetal Oxide Based Electrocatalyst for Methanol Oxidation Reaction29
Modeling of the Continuous Dehydrogenation of Perhydro‐Dibenzyltoluene in a Cuboid Reactor29
First‐Principle Density Functional Theory‐Derived Nonleaded KSn1−xGexI3‐Based Perovskite Solar Cells: A Theoretical Study28
Thermodynamic and Economic Analysis of a Standalone Supercritical Thermal Power Plant Integrated with Molten Carbonate Fuel Cell28
Effect of Laser Energy Density on Photophysical and Photocatalytic Properties of BiVO4 Single‐Crystal Thin Film27
Tinite–Ceramic‐Inspired Solar‐Driven Thermoelectric Nanogenerator—Single Step toward Efficient Energy Harvesting26
Presentation and Performance of a Planar Solid Oxide Fuel Cell with Chaotic Gas Channels26
Development of Sub‐Band in Spray‐Deposited Cr‐Substituted Chalcopyrite Thin Films for Advancing Solar Cell Efficiency26
Renewable Energy‐Based Load Frequency Controller and Model with a Reduced Order for a Large‐Scale Power System26
NaF Modification of Open/Closed Pores Enhancing the Sodium Storage in Hard Carbon25
Nanofluid‐Cooled Microchannel‐Integrated Metal Foam/Phase Change Material Composite‐Based Li‐Ion Battery Pack Design25
25
System Power Quality Analysis under Wind–Hydro Complementary Generation Mode25
N‐Doped Porous Carbon Nanofiber Mats for High‐Performance Flexible Supercapacitor Electrodes25
In Situ Hydrogen Bonding‐Mediated Self‐Synthesis of Graphene‐Coated SnO2 as Anode Materials for Lithium‐Ion Batteries25
25
Feasibility Study of a Novel Secondary Zinc‐Flow Battery as Stationary Energy Storage System: From Design to Environmental Assessment25
WO3–V2O5–Carbon Fiber Self‐Supported Composite Electrodes for High‐Performance Supercapacitors25
Uniformly Dispersed Ultrasmall Fe(Co)Ni Alloy Nanoparticles Embedded in Thin‐Walled Carbon Nanotubes as High‐Performance Anode Materials for Lithium‐Ion Battery25
Masthead25
Thermodynamic Analysis of Dry Reforming of Methane for Valorization of Landfill Gas and Natural Gas24
Biopolymer Binders for Low‐Temperature Operation of TiNb2O7 Anode in Li‐Ion Batteries24
Hydrovoltaic Materials and Devices: From Synthetic Materials, Macroscopic Biomaterials, to Micro Biomaterials24
Development of a Two‐Stage Hydrogen‐Based Thermochemical Energy Storage System22
Framework of Maximum Solar Energy Conversion Using Lyapunov‐Based Model Reference Adaptive Control Technique in Stochastic Weather Conditions22
Waste‐Derived Activated Carbon for Supercapacitors: Current Trends and Future Prospects22
Recent Progress on Photothermal Heterogeneous Catalysts for CO2 Conversion Reactions22
Selection of Natural Gas Dehydration Process for Offshore Floating Production Storage and Offloading22
22
Controlling Nucleation and Crystal Growth Orientation via Intermediate Ion‐Complex Formation for Efficient α‐FA0.95Cs0.05PbI3 Perovskite Solar Cells22
Capacity Prediction Method of Lithium‐Ion Battery in Production Process Based on Improved Random Forest22
Challenges in Laboratory Catalytic Testing for Ammonia Decomposition under Industrially Relevant Conditions22
Impact of Ammonium Triflate on Iota Carrageenan Solid Biopolymer Electrolytes for Electrochemical Devices22
Temporal Covariance‐Involved Distributionally Robust Optimization for Photovoltaic–Hydrogen Integrated Energy System Scheduling Considering Source, Load Sides, and Market Uncertainties21
Zinc Cobalt Sulfide/Reduced Graphene Oxide Nanocomposite for High‐Performance Asymmetric Supercapacitor: A Microwave‐Assisted Synthesis21
Synthesis and Unveiling Properties of Nanocomposite NiO/Mn2O3 and Ni–Mn‐Based Layered Double Hydroxide as Efficient Supercapacitor Electrodes21
Research on the Optimal Output Power of Proton‐Exchange Membrane Fuel Cell Based on Improved Model Predictive Control Strategy21
On the Design of Recuperator for Transcritical Cycle Adopting CO2‐Based Mixture as Working Fluid: A Focus on Transport Properties Prediction21
Earthworm‐Inspired Triboelectric Nanogenerator with O‐Shaped Multilayer Structure for Marine Ranching21
Piezoelectric Energy Harvesting: From Fundamentals to Advanced Applications20
Computational Exploration of Structural, Electronic, and Optical Properties of Novel Combinations of Inorganic Ruddlesden–Popper Layered Perovskites Bi2XO4(X = Be, Mg) using Tran20
Development of an Induction Supported Roll to Roll Process for the Accelerated Drying of Water‐Based Anodes and N‐Methyl‐2‐Pyrrolidone‐Based Cathodes for Lithium‐Ion Batteries20
Thickness Dependence of WO3 and NiOx Thin Films in All‐Solid‐State Complementary Electrochromic Devices20
Monolithic Interconnection of Thin‐Film Perovskite Photovoltaic Modules Using Aerosol Jet Printing20
Productivity Modeling Enhancement of a Solar Desalination Unit with Nanofluids Using Machine Learning Algorithms Integrated with Bayesian Optimization20
Synergistic Effect of a Ni/Al2O3+YSZ Nanocomposite for the Steam Reforming of Biogas in the Presence of Electric Fields20
Porous Carbon‐Coated Fe‐Doped MnO as High‐Performance Cathode for Aqueous Zinc Ion Batteries20
Design and Optimization of an F‐type Air‐Cooling Structure for Lithium‐Ion Battery of Electric Vehicle20
Adaptive Joint Multiobjective Operating Parameters’ Optimization for Active Direct Methanol Fuel Cells20
Development of a Vanadium Redox Flow Battery Operating with Thin Membrane Coupled with a Highly Selective and Stable Silica‐Based Barrier Layer19
MXene Promotes the Electrochemical Performance of V6O13 Cathode toward Advanced Aqueous Zinc‐Ion Batteries19
Operation of a Solid Oxide Fuel Cell Reactor with Multiple Stacks in a Pressured System with Fuel Gas Recirculation19
The Simulation and Analysis of Leakage, Diffusion Behavior, and Risk Mitigation Measures in a Hydrogen‐Refueling Station19
Microarchitectures of Carbon Nanotubes for Reversible Na Plating/Stripping Toward the Development of Room‐Temperature Na–S Batteries19
Synergistic Effects in Earth‐Abundant Bimetallic Aerogels for Enhanced Oxygen Evolution Reaction19
Nucleotide‐Based Carbon Dot‐Assisted Synthesis of High Surface Area Porous α‐Ni(OH)2 as an Efficient Battery‐Type Supercapacitor Electrode19
Investigating the Impact of Copper and Zinc Doping in High‐Entropy Prussian Blue Analogues for Na‐Ion Batteries: From Material Analysis to Device Fabrication19
Design and Thermodynamic Investigation of a Waste Heat‐Assisted Compressed Air Energy Storage System Integrating Thermal Energy Storage and Organic Rankine Cycle19
Defective N‐Doped Carbon Nanospheres Anchored Pd for Selective Hydrodeoxygenation of Bio‐Models under Mild Conditions18
Stacked Microfluidic Paper Ethanol Fuel Cell with a Variety of Rapidly Prototyped Electrodes: Optimization and Performance Investigation18
State‐of‐Health Prediction for Lithium‐Ion Batteries Based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise‐Gate Recurrent Unit Fusion Model18
Influence of the Current Density on the Interfacial Reactivity of Layered Oxide Cathodes for Sodium‐Ion Batteries18
A Novel and Highly Efficient Indolyl‐Based Electrolyte for Mg Batteries18
Perovskite and Polymeric Solar Cells: A Comparison of Advances and Key Challenges18
Electrochemical Preparation of Poly(N‐anthraquinoyl pyrrole) as High‐Performance Cathode Materials for Organic Lithium‐Ion Batteries18
Investigation of Self‐Discharge Behavior on Electrical Double‐Layer Capacitors by Hybrid Mechanism Simulation18
Ultrathin Nanosheets NiCo2O4/C Hollow Microtube Composites with Superior Performances for Supercapacitors18
Synthesis of a Novel Ag/Co–B/CTAB Catalyst via Chemical Reaction at Room Temperature for Hydrolysis of Ammonia Borane18
Arc‐Shaped Triboelectric Nanogenerator for Wind Energy Harvesting18
2.5 V High‐Performance Aqueous and Semi‐Solid‐State Symmetric Supercapacitors Enabled by 3 m Sulfolane‐Saturated Aqueous Electrolytes18
Thermal Modeling and Analysis of an Electric Vehicle Charging System18
The CsPbI2Br Perovskite Solar Cell with High Open‐Circuit Voltage by Crystallization Optimization18
Model‐Based Optimization of Web Tension Control for the Flexible Cell Stack Assembly of Lithium‐Ion Battery Cells17
A Robust Electrocatalyst for Oxygen Reduction Reaction Assembled with Pt Nanoclusters and a Melem‐Modified Carbon Support17
Solid Solution MoS2−xTex with Reduced Lattice Change Compared to MoS2–MoTe2 Heterostructure for Enhanced Cycling Performance of Lithium‐Ion Ba17
Bifunctional Mesoporous MOx (M = Cr, Fe, Co, Ni, Ce) Oxygen Electrocatalysts for Platinum Group Metal‐Free Oxygen Pumps17
Energy Optimization Based on Steam System Analysis and Waste Energy Recovery for Iron and Steel Industry17
Improved Performance of Organic Solar Cells by Utilizing Green Non‐Halogen Additive to Modulate Active‐Layer Morphology17
Novel Core–Shell‐Structured Zeolitic Imidazolate Framework (ZIF)‐90@ZIF‐67 Applied for High‐Performance All‐Solid‐State Asymmetric Supercapacitor17
Hierarchically Porous Carbon from Lychee Seed as Cathode Host for Fast‐Charging and High Area Capacity Li–Se Batteries17
Photothermal‐Induced Electrical Behavior of Micron‐Sized Platinum Structures and Their Efficient Photodetection17
Lithium‐Ion Battery Testing Capable of Simulating “Ultralow” Lunar Temperatures17
A Novel District Heating System Coupled with Reclaimed Water Source Heat Pump: Energy, Economic, Environmental, and Application Analysis17
Tailoring the Void Space of a Silicon Anode for High‐Capacity and Low‐Expansion Lithium Storage17
Effects of Tab Design in 21700 Li‐Ion Cells: Improvements of Cell Impedance, Rate Capability, and Cycling Aging17
Modeling of Carbon Black Fragmentation During High‐Intensity Dry Mixing Using the Population Balance Equation and the Discrete Element Method17
Lithium Fluoride Assisted Preparation of High‐Performance All‐Inorganic CsPbI3 Perovskite Solar Cells16
Flexible Thermoelectric Generator from Bulk Graphite and Bismuth Traces on Emery Paper16
Improved Proton Adsorption and Charge Separation on Cadmium Sulfides for Photocatalytic Hydrogen Production16
Lithium‐Ion Battery Thermal Management Techniques and Their Current Readiness Level16
Automated Machine Learning Approach in Material Discovery of Hole Selective Layers for Perovskite Solar Cells16
Fast Charging Formation of Lithium‐Ion Batteries Based on Real‐Time Negative Electrode Voltage Control16
Modeling Contact Behavior of Multiparticles and Particle–Current Collector Contact in Porous Electrode16
Performance of Continuous Hydrogen Production from Perhydro Benzyltoluene by Catalytic Distillation and Heat Integration Concepts with a Fuel Cell16
Bimetal Synergetic Strategy of Nickel Iron Selenides to Improve the Catalytic Activity and Cyclic Stability in Dye‐Sensitized Solar Cells16
Additive Engineering for High‐Performance Two‐Dimensional Dion–Jacobson Pb–Sn Alloyed Perovskite Solar Cells16
Annealing Rate as a Crucial Parameter Controlling the Photoelectrochemical Properties of AuCu Mosaic Core–Shell Nanoparticles16
Laser‐Based Joining of Electrode Stacks for Automated Large‐Scale Production of Li‐Ion Battery Cells16
Reliability and Potential of Inkjet‐Printed Flexible Heaters with Adaptive Temperature Zones for High‐Temperature and Long‐Time Applications16
Performance and Stability Improvement of Inverted Perovskite Solar Cells by Interface Modification of Charge Transport Layers Using an Azulene–Pyridine Molecule16
Influence of Ice Templating on Oxygen Reduction Catalytic Activity of Metal‐Free Heteroatom‐Doped Mesoporous Carbon Derived from Polypyrrole for Zinc–Air Batteries16
Polyvinylidene Fluoride‐Based Vibration Energy Harvester with Piezoelectric and Electromagnetic Effects16
Efficient and Stable Carbon‐Based All‐Inorganic CsPbIBr2 Perovskite Solar Cells Obtained via Treatment by Biological Active Substance Additive16
Review of Inorganic Hole Transport Materials for Perovskite Solar Cells15
Automated Fabrication of Perovskite Photovoltaics Using Inkjet Printing and Intense Pulse Light Annealing15
Reduction Thermodynamics of Sr1−xCexMnO3 and CexSr2−xMnO4 Perovskites for Solar Thermochemical Hydrogen Pr15
Development of Novel Pulse Charger for Next‐Generation Batteries15
Halogen‐Free Polyphosphazene‐Based Flame Retardant Cathode Materials for Li–S Batteries15
Analysis of the Thermal Management of a High‐Temperature Methanol Fuel Cell Using a Latent Heat Storage15
A Comprehensive Perspective on the Fabrication of CuGaSe2/Si Tandem Solar Cells15
Structural Control and Optimization Schemes of Silicon‐Based Anode Materials15
Efficient Charge Storage in Hierarchically Porous Carbon Foams for Supercapacitor Applications15
The Elemental Multifariousness of the Defect‐Pyrochlore Crystal Structure and Application in Photocatalytic Hydrogen Generation15
High‐Performance Charging Method for Cold Energy Storage Using Foam Freezing14
MoS2 and Ti3C2 Ensembles into TiO2 for Efficient Photocatalytic Hydrogen Evolution: Dual‐Bonding Interactions and Capacitive Effect Trigger the Intrinsic Ac14
Structure Effect on Pseudocapacitive Properties of A2LaMn2O7 (A = Ca, Sr)14
A Pitaya‐Like Co‐800@KJ Nanocomposite as Separator Coating for High‐Performance Lithium–Sulfur Battery14
Effects of Electrolyte Additives and Nanowire Diameter on the Electrochemical Performance of Lithium‐Ion Battery Anodes based on Interconnected Nickel–Tin Nanowire Networks14
Use of Cellulose for the Production of Photocatalytic Films for Hydrogen Evolution Along the Lines of Paper Production14
Solar Powered Small Unmanned Aerial Vehicles: A Review14
One‐Step Synthesis of Hierarchical Structure Polydimethylsiloxane Films with Micro‐/Nanosurfaces for Application in Triboelectric Nanogenerators14
Monolithically Integrated Sensing, Communication, and Energy Harvester14
Recent Developments in the Field of Sulfide Ceramic Solid‐State Electrolytes14
Core–Shell CoSn@CoSnOx Nanoparticles Encapsulated in Hollow Carbon Nanocubes as Anodes for Lithium‐Ion Batteries14
Efficiency and Stability Analysis of 2D/3D Perovskite Solar Cells Using Machine Learning14
Electrochromism or Water Splitting in Neutral Aqueous Solutions by a Metallo‐Organic Assembly14
Poly(Vinylidene Fluoride) Nanofiber Array Films with High Strength for Effective Impact Energy Harvesting14
Wind Speed Prediction in the Hexi Corridor Region of China Using an Enhanced Multiscale Nonlinear Ensemble Model14
Cesium Iodide Incorporation in Tin Oxide Electron Transport Layer for Defect Passivation and Efficiency Enhancement in Double Cation Absorber‐Based Planar Perovskite Solar Cells14
Retraction: Neodymium and Praseodymium Doped Perovskite Materials for Highly Stable CuInS2‐Hole‐Transport Layer‐Based Perovskite Solar Cells14
Effects of Gas Diffusion Layer Porosity Distribution on Proton Exchange Membrane Fuel Cell14
Deep and Comprehensive Study on the Impact of Different Phosphazene‐Based Flame‐Retardant Additives on Electrolyte Properties, Performance, and Durability of High‐Voltage LMNO‐Based Lithium‐Ion Batter14
2D/3D ZIF‐9/Mo15S19 S‐Scheme Heterojunction for Productive Photocatalytic Hydrogen Evolution14
Emerging Trends on the Implementation of Nanomaterials for Improving the Performance of Photovoltaic Thermal Systems: Energetic, Exergetic, Environmental, and Economic Perspectives14
Broadband Absorption and Photothermal Conversion Properties of Oxygen‐Deficient TiO2 Aqueous Nanofluids13
Interfacial Modification of Multifunctional Organic Ammonium Salt for PEDOT:PSS‐Based Inverted Perovskite Solar Cells13
Recent Progress on Emerging Porous Materials for Solar‐Driven Interfacial Water Evaporation13
Atomic Layer Deposition of NiO on Self‐Supported Co3O4 Nanoneedle Array for Electrocatalytic Methanol Oxidation Reaction13
Defining Aging Marker Molecules of 1,3‐Propane Sultone for Targeted Identification in Spent LiNi0.6Co0.2Mn0.2O2||AG Cells13
Estimation‐Based Event‐Triggered Adaptive Terminal Sliding Mode Control without Pressure Sensors for a Polymer Electrolyte Membrane Fuel Cell Air Feeding System13
Constructing Multiphase Structures to Enhance Lithium Storage Performance of Black Phosphorus–Carbon Composite13
Real‐Time Smartphone Charging from Recycled Aluminum Foil–Based Electromagnetic Energy Harvester13
Review on Microphotosynthetic Power Cells—A Low‐Power Energy‐Harvesting Bioelectrochemical Cell: From Fundamentals to Applications13
Combined Modifications for Effectively Improving the Photoelectrochemical Performance of Hematite Photoanode13
Study on 3D Simulation Performance of Large‐Scale Proton Exchange Membrane Fuel Cell with Distribution Region13
Enhanced Capacitance and Desalination Performance with Plasma‐Activated Biochar Electrodes13
Experimental Investigation Into Effects of Thermodynamic Hydrate Inhibitors on Natural Gas Hydrate Synthesis in 1D Reactor13
Single‐Source‐Precursor‐Derived Binary FeNi Phosphide Nanoparticles Encapsulated in N, P Co‐Doped Carbon as Electrocatalyst for Hydrogen Evolution Reaction and Oxygen Evolution Reaction13
Advanced Research Progress on High‐Efficient Utilization of Pt Electrocatalysts in Fuel Cells13
Mechanical Structuring of Lithium‐Ion Battery Electrodes Using an Embossing Roller13
Time and Potential‐Resolved Comparison of Copper Disc and Copper Nanoparticles for Electrocatalytic Hydrogenation of Furfural13
In:SnO2/Yb2S3:Cu2S:ZnS: A Rare Earth Metal Sulfide‐Conjugated Transition Metal Sulfide Photoactive Electrode13
Size Effect of (CuO)n (n = 1–6) Clusters on the Modification of Rutile–TiO2 Photocatalysts13
Flexible Carbon Cloth Supercapacitors with High Power and Energy Densities13
Effect of Ca on Perovskite La1−xCaxNiO3 Catalyst for CO2 Hydrogenation‐to‐Light Hydrocarbons in a Dielectric Barrier Discharge Plasma Reactor13
EVA/PZT‐Composite‐Based Triboelectric Nanogenerator for Energy Harvesting13
The Influence of Electrolyte Volume on Calendaric Aging of Lithium‐Ion Batteries12
Exploring the Potential of Natural Rubber as Electrolytes and Electrodes for Advanced Energy Storage Applications12
Thermal Storage: From Low‐to‐High‐Temperature Systems12
Hole Selectivity of n‐Type Molybdenum Oxide Carrier Selective Layer for Commercial and Emerging Thin‐Film Photovoltaics: A Critical Analysis of Interface Energetics and Ensuant Device Physics12
Simulative Investigation of Optimal Multiparameterized Cooling Plate Topologies for Different Battery System Configurations12
Investigation of the Effects of Cohydrothermal Carbonization on the Physicochemical Characteristics and Combustion Behavior of Straw Hydrochars12
Experimental Investigation on Chemical Looping Co‐Gasification of Water Hyacinth and Solid Wastes12
Recent Advances in Multifunctional Photothermal Materials for Solar‐Driven Steam and Energy Generation12
Ionic Liquid‐Supported Vat Dye (Congo Red)‐Based Donor–Acceptor Type Conjugated Polymeric Material as Photosensitizer for Dye‐Sensitized Solar Cells12
Impact of Preprocessing of Graphene Additive via Ultrasonication on the Electrochemical Performance of Activated Carbon‐Based Supercapacitors12
Carbon Dot/Ti3C2Tx MXene Hybrid on Carbon Cloth as a Flexible and Binder‐Free Supercapacitor Electrode with Commercial Scale Mass Loading12
Growth Dynamics‐Dependent Chemical Approach to Accomplish Nanostructured Cobalt Vanadium Oxide Thin Film Electrodes with Controlled Surface Area for High‐Performance Solid‐State Hybrid Supercapacitor 12
Insights into the Application of 2D Phosphorene in Dye‐Sensitized Solar Cells12
Semi‐Dry Extrusion‐Based Processing for Graphite Anodes: Morphological Insights and Electrochemical Performance12
Outdoor Thermal Performance of Photovoltaic Devices with Enhanced Daytime Radiative Cooling Glass12
A Green Recycling Method for LiMn2O4 Cathode Materials by Simple Heat Treatment12
CsPbIBr2‐Based Bifacial Semitransparent Solar Cells for All‐Day Applications12
Fe3+‐ and Nb5+‐Substituted Na0.5Bi0.5TiO3: A Route toward Enhanced Ferroelectric Photovoltaic Response in Al/NBFNT/Ag Solar Cell through Reduced 12
Exploring Enhanced Electrocatalytic Hydrogen Evolution by Metal‐Free Highly Conjugated Azomethine‐Functionalized Graphitic Carbon Nitride12
Soft‐Pyrolysis Co–N‐Implanted Polymer to Gain High‐Density Co–Nx Sites on Carbons for Efficient Oxygen Reduction in Zn–Air Batteries12
Operation Performance Analysis of a Novel Renewable Energy‐Driven Multienergy Supply System Based on Wind, Photovoltaic, Concentrating Solar Power, Proton Exchange Membrane Electrolyzers, and Proton E12
Dry Methane Reforming in a Piston Engine for Chemical Energy Storage and Carbon Dioxide Utilization: Kinetic Modeling and Thermodynamic Evaluation12
High‐Performance Self‐Powered Broadband Schottky Junction Photodetector Based on Graphene‐Silicon van der Waals Heterostructure12
Hydrogen Infrastructure in the Future CO2‐Neutral European Energy System—How Does the Demand for Hydrogen Affect the Need for Infrastructure?11
Stability and Efficiency Enhancement of Antimony Selenosulfide Solar Cells with Inorganic SnS‐Modified Nickel Oxide Hole Transport Materials11
Analysis of the Hydrogen‐Filling Process of Fixed Station and Skid Station Based on Different Working Conditions11
Regenerative Braking Control Strategy Based on Pavement Recognition Controller for Electric Vehicle11
Development of Superior Nickel Oxide Layer for Boosted Hole‐Transport Performance in Perovskite Solar Cells11
Effect of Ca and Co over Ni–Al Mixed Oxides for Hydrogen Production by Ethanol Steam Reforming11
Optimization of Photovoltaic Energy Systems for Residential Customers in Hot Climate Areas Based on Seasonal and Average Daily Load Profile11
Implementing Substrate Treatments to Enhance Adhesion and Facilitate Cyrene as an NMP Alternative for Sustainable Printed Nickel–Manganese–Cobalt‐Based Battery Cathodes11
11
Heating Control Strategy of CO2 Heat Pump Air Conditioning System of Electric Vehicle Based on Waste Heat Recovery Technology11
Design of an Innovative Point Array Offshore Floating Wind Turbine System and Analysis of Hydrodynamic Coupling Response Law11
1D Layered LiVO3 Nanorods Synthesized by Ultrasonic‐Assisted Chemical Route for Supercapacitor Applications11
Efficient Perovskite Solar Cells Enabled by Facile Synthesis of Triphenylamine‐Based Hole‐Transport Material with D–A1–A2 Structure11
Exploring Vanadium Disulfide (VS2) Nanosheets as High‐Efficiency Supercapacitor Electrodes11
Evaluation of Supercapacitor Properties of Radio Frequency Sputter Binder‐Free and Nanosandwich WO3/SiO2/WO3 Thin Film11
Cover Picture11
Ionic Liquid‐Supported Single‐Sodium‐Ion‐Conducting Styrene‐Maleic Anhydride Copolymer for Energy Storage Devices11
Integrated Concentrating Solar/Photovoltaic Hybrid Concepts—Technological Discussion, Energy Yield, and Cost Considerations11
Ontology‐Based Battery Production Dataspace and Its Interweaving with Artificial Intelligence‐Empowered Data Analytics11
Dual‐Functional NiMg2−xCaxAl‐Hydrotalcite for Integrated CO2 Capture and In Situ Methanation11
Hollow Carbon Sphere and Polyhedral Carbon Composites Supported Iron Nanoparticles as Excellent Bifunctional Electrocatalysts of Zn–Air Battery11
Nickel‐Foam‐ and Carbon‐Nanotubes‐Fiber‐Supported Bismuth Oxide/Nickel Oxide Composite; Highly Active and Stable Bifunctional Electrocatalysts for Water Splitting in Neutral and Alkaline Media11
Application of Buffer Layer to Improve the Efficiency of Organic Solar Cells11
A Hybrid Technique for Optimal Placement of Fast‐Charging Stations of Electric Vehicles for the Reliability of Distribution Network11
Enhanced‐Performance Electrodes from Biomass‐Derived Carbon (Rice Husk) for Printable Perovskite Solar Cells11
A Review of High‐Temperature Foam for Improving Steam Flooding Effect: Mechanism and Application of Foam10
0.48470711708069