OOIR: Observatory of International Research

Papers

(The H4-Index of Nano Energy is 125. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)

Article	Citations
A comprehensive review on the state-of-the-art of piezoelectric energy harvesting	605
Enhanced photocatalytic degradation and H2/H2O2 production performance of S-pCN/WO2.72 S-scheme heterojunction with appropriate surface oxygen vacancies	546
The roles of oxygen vacancies in electrocatalytic oxygen evolution reaction	493
“The Fe Effect”: A review unveiling the critical roles of Fe in enhancing OER activity of Ni and Co based catalysts	465
Flexible PVDF based piezoelectric nanogenerators	374
Lead-free tin-halide perovskite solar cells with 13% efficiency	354
Tuning Zn2+ coordination environment to suppress dendrite formation for high-performance Zn-ion batteries	333
Exceptional piezoelectricity, high thermal conductivity and stiffness and promising photocatalysis in two-dimensional MoSi2N4 family confirmed by first-principles	322
Recent advances in energy-saving chemiresistive gas sensors: A review	303
Review on comprehending and enhancing the initial Coulombic efficiency of anode materials in lithium-ion/sodium-ion batteries	294
14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor	282
Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries	274
A strawberry-like Ag-decorated barium titanate enhances piezoelectric and antibacterial activities of polymer scaffold	270
CRISPR-Cas12a-driven MXene-PEDOT:PSS piezoresistive wireless biosensor	267
Multifunctional poly(vinyl alcohol)/Ag nanofibers-based triboelectric nanogenerator for self-powered MXene/tungsten oxide nanohybrid NO2 gas sensor	257
Recent advance and prospectives of electrocatalysts based on transition metal selenides for efficient water splitting	256
A critical review on semitransparent organic solar cells	254
Zn-ion hybrid supercapacitors: Achievements, challenges and future perspectives	243
Same materials, bigger output: A reversibly transformable 2D–3D photothermal evaporator for highly efficient solar steam generation	239
Harnessing the interplay of Fe–Ni atom pairs embedded in nitrogen-doped carbon for bifunctional oxygen electrocatalysis	237
Hierarchical Co and Nb dual-doped MoS2 nanosheets shelled micro-TiO2 hollow spheres as effective multifunctional electrocatalysts for HER, OER, and ORR	230
Principals and strategies for constructing a highly reversible zinc metal anode in aqueous batteries	229
High-performance triboelectric nanogenerator based on MXene functionalized polyvinylidene fluoride composite nanofibers	222
Reversing heat conduction loss: Extracting energy from bulk water to enhance solar steam generation	220
Hierarchically structured PVDF/ZnO core-shell nanofibers for self-powered physiological monitoring electronics	215

Wearable triboelectric nanogenerators for biomechanical energy harvesting	215
Ultra-Stretchable, durable and conductive hydrogel with hybrid double network as high performance strain sensor and stretchable triboelectric nanogenerator	215
Superior energy storage properties and excellent stability achieved in environment-friendly ferroelectrics via composition design strategy	215
Atomically dispersed hierarchically ordered porous Fe–N–C electrocatalyst for high performance electrocatalytic oxygen reduction in Zn-Air battery	212
A flexible ultra-sensitive triboelectric tactile sensor of wrinkled PDMS/MXene composite films for E-skin	209
Atomically targeting NiFe LDH to create multivacancies for OER catalysis with a small organic anchor	209
Iridium-based nanomaterials for electrochemical water splitting	204
Recent advances in electrocatalysts for neutral and large-current-density water electrolysis	201
Stretchable, self-healing, conductive hydrogel fibers for strain sensing and triboelectric energy-harvesting smart textiles	195
A wireless energy transmission enabled wearable active acetone biosensor for non-invasive prediabetes diagnosis	195
Promoting smart cities into the 5G era with multi-field Internet of Things (IoT) applications powered with advanced mechanical energy harvesters	193
Cobalt single atom site isolated Pt nanoparticles for efficient ORR and HER in acid media	193
Technology evolution from self-powered sensors to AIoT enabled smart homes	187
Mechanism of enhanced energy storage density in AgNbO3-based lead-free antiferroelectrics	186
Polymer based thermoelectric nanocomposite materials and devices: Fabrication and characteristics	186
Efficient radiative cooling coating with biomimetic human skin wrinkle structure	184
3D porous polymer film with designed pore architecture and auto-deposited SiO2 for highly efficient passive radiative cooling	182
Oxygen defect enriched (NH4)2V10O25·8H2O nanosheets for superior aqueous zinc‐ion batteries	178
Designed controllable nitrogen-doped carbon-dots-loaded MoP nanoparticles for boosting hydrogen evolution reaction in alkaline medium	177
A review of niobium oxides based nanocomposites for lithium-ion batteries, sodium-ion batteries and supercapacitors	176
Significantly enhanced breakdown strength and energy density in sandwich-structured nanocomposites with low-level BaTiO3 nanowires	176
Different dimensional nanoadditives for thermal conductivity enhancement of phase change materials: Fundamentals and applications	173
Triboelectric nanogenerator based self-powered sensor for artificial intelligence	172
Boost sodium-ion batteries to commercialization: Strategies to enhance initial Coulombic efficiency of hard carbon anode	171
Modulating Zn deposition via ceramic-cellulose separator with interfacial polarization effect for durable zinc anode	171
A simple, mild and versatile method for preparation of photothermal woods toward highly efficient solar steam generation	170
Environmentally stable, mechanically flexible, self-adhesive, and electrically conductive Ti3C2TX MXene hydrogels for wide-temperature strain sensing	166
All 3D-printed stretchable piezoelectric nanogenerator with non-protruding kirigami structure	166
Template-guided synthesis of Co nanoparticles embedded in hollow nitrogen doped carbon tubes as a highly efficient catalyst for rechargeable Zn-air batteries	162
Three-dimensionally ordered macro-microporous metal organic frameworks with strong sulfur immobilization and catalyzation for high-performance lithium-sulfur batteries	162
Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators	162
Design and performance boost of a MOF-functionalized-wood solar evaporator through tuning the hydrogen-bonding interactions	161
Biomimetic, biocompatible and robust silk Fibroin-MXene film with stable 3D cross-link structure for flexible pressure sensors	160
Highly conductive phase change composites enabled by vertically-aligned reticulated graphite nanoplatelets for high-temperature solar photo/electro-thermal energy conversion, harvesting and storage	160
Electronic structure engineering on two-dimensional (2D) electrocatalytic materials for oxygen reduction, oxygen evolution, and hydrogen evolution reactions	159
Breathable, washable and wearable woven-structured triboelectric nanogenerators utilizing electrospun nanofibers for biomechanical energy harvesting and self-powered sensing	158
In-situ phase transition of WO3 boosting electron and hydrogen transfer for enhancing hydrogen evolution on Pt	158
The promise of hydrogen production from alkaline anion exchange membrane electrolyzers	157
Monosodium glutamate, an effective electrolyte additive to enhance cycling performance of Zn anode in aqueous battery	156
Recent advances in using nanofluids in renewable energy systems and the environmental implications of their uptake	155
Improving electrocatalytic activities of FeCo2O4@FeCo2S4@PPy electrodes by surface/interface regulation	155
Modifications of MXene layers for supercapacitors	155
Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV	155
High-energy all-in-one stretchable micro-supercapacitor arrays based on 3D laser-induced graphene foams decorated with mesoporous ZnP nanosheets for self-powered stretchable systems	154
Significantly enhanced electrostatic energy storage performance of P(VDF-HFP)/BaTiO3-Bi(Li0.5Nb0.5)O3 nanocomposites	154
Local hot charge density regulation: Vibration-free pyroelectric nanogenerator for effectively enhancing catalysis and in-situ surface enhanced Raman scattering monitoring	153
Piezoelectric fiber composites with polydopamine interfacial layer for self-powered wearable biomonitoring	153
An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes	153
Controlled heterogeneous water distribution and evaporation towards enhanced photothermal water-electricity-hydrogen production	153
Flexible and stretchable triboelectric nanogenerator fabric for biomechanical energy harvesting and self-powered dual-mode human motion monitoring	152

Underwater superaerophobic Ni nanoparticle-decorated nickel–molybdenum nitride nanowire arrays for hydrogen evolution in neutral media	152
Recent development of lithium argyrodite solid-state electrolytes for solid-state batteries: Synthesis, structure, stability and dynamics	149
A mechanically robust self-healing binder for silicon anode in lithium ion batteries	149
High-performance triboelectric nanogenerator based on electrospun PVDF-graphene nanosheet composite nanofibers for energy harvesting	148
Electrocatalytic nitrate/nitrite reduction to ammonia synthesis using metal nanocatalysts and bio-inspired metalloenzymes	146
Wearable MXene nanocomposites-based strain sensor with tile-like stacked hierarchical microstructure for broad-range ultrasensitive sensing	146
Recent advances in rational design of polymer nanocomposite dielectrics for energy storage	145
Recent progress in blue energy harvesting for powering distributed sensors in ocean	144
Benzothiadiazole-based non-fullerene acceptors	144
Wood-cellulose-fiber-based functional materials for triboelectric nanogenerators	143
Review of radiative cooling materials: Performance evaluation and design approaches	143
Defect engineering for electrochemical nitrogen reduction reaction to ammonia	143
A review on piezo- and pyroelectric responses of flexible nano- and micropatterned polymer surfaces for biomedical sensing and energy harvesting applications	142
MXenes: Emerging 2D materials for hydrogen storage	140
Pyroelectric effect in CdS nanorods decorated with a molecular Co-catalyst for hydrogen evolution	140
Tuning d-band center of tungsten carbide via Mo doping for efficient hydrogen evolution and Zn–H2O cell over a wide pH range	140
Formation of sandwiched leaf-like CNTs-Co/ZnCo2O4@NC-CNTs nanohybrids for high-power-density rechargeable Zn-air batteries	140
Designing 3d dual transition metal electrocatalysts for oxygen evolution reaction in alkaline electrolyte: Beyond oxides	138
Advanced multifunctional composite phase change materials based on photo-responsive materials	138
Flower-like open-structured polycrystalline copper with synergistic multi-crystal plane for efficient electrocatalytic reduction of nitrate to ammonia	138
Self-powered wearable pressure sensing system for continuous healthcare monitoring enabled by flexible thin-film thermoelectric generator	138
Integration of a porous wood-based triboelectric nanogenerator and gas sensor for real-time wireless food-quality assessment	138
Boron-modified cobalt iron layered double hydroxides for high efficiency seawater oxidation	137
Review on recent progress of lead-free halide perovskites in optoelectronic applications	136
Flexible single-electrode triboelectric nanogenerators with MXene/PDMS composite film for biomechanical motion sensors	135
Thermochromic smart windows with highly regulated radiative cooling and solar transmission	135
Surface sites engineering on semiconductors to boost photocatalytic CO2 reduction	134
Promoting charge separation resulting in ternary organic solar cells efficiency over 17.5%	134
Soft-contact cylindrical triboelectric-electromagnetic hybrid nanogenerator based on swing structure for ultra-low frequency water wave energy harvesting	134
SrTiO3-based thermoelectrics: Progress and challenges	134
Self-driven power management system for triboelectric nanogenerators	134
Thermoelectric converter: Strategies from materials to device application	133
Plasmonic wooden flower for highly efficient solar vapor generation	133
Synergistically coupling of 3D FeNi-LDH arrays with Ti3C2Tx-MXene nanosheets toward superior symmetric supercapacitor	133
Highly salt-resistant and all-weather solar-driven interfacial evaporators with photothermal and electrothermal effects based on Janus graphene@silicone sponges	133
Polymer-based dielectrics with high permittivity for electric energy storage: A review	131
Recent progress of organic photovoltaics for indoor energy harvesting	130
Interfacial electronic structure modulation of Pt-MoS2 heterostructure for enhancing electrocatalytic hydrogen evolution reaction	129
In situ polymerized polyaniline/MXene (V2C) as building blocks of supercapacitor and ammonia sensor self-powered by electromagnetic-triboelectric hybrid generator	128
Synergizing in-grown Ni3N/Ni heterostructured core and ultrathin Ni3N surface shell enables self-adaptive surface reconfiguration and efficient oxygen evolution reaction	128
Conceptual analysis framework development to understand barriers of nanofluid commercialization	128
High mass-loading NiCo-LDH nanosheet arrays grown on carbon cloth by electrodeposition for excellent electrochemical energy storage	128
Bilayer porous polymer for efficient passive building cooling	127
Synergetic effect of spatially separated dual co-catalyst for accelerating multiple conversion reaction in advanced lithium sulfur batteries	127
Recent advances in cellulose-based flexible triboelectric nanogenerators	126
Biomass-derived, multifunctional and wave-layered carbon aerogels toward wearable pressure sensors, supercapacitors and triboelectric nanogenerators	126
Nanostructured photocatalysts for nitrogen fixation	126
Na-substitution induced oxygen vacancy achieving high transition metal capacity in commercial Li-rich cathode	125
Porous NiCo2S4/FeOOH nanowire arrays with rich sulfide/hydroxide interfaces enable high OER activity	125
Bioinspired, multifunctional dual-mode pressure sensors as electronic skin for decoding complex loading processes and human motions	125