Colloid and Interface Science Communications

Papers
(The median citation count of Colloid and Interface Science Communications is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)
ArticleCitations
ZnO Nanoadsorbents: A potent material for removal of heavy metal ions from wastewater80
Arsenic removal from water by starch functionalized maghemite nano-adsorbents: Thermodynamics and kinetics investigations76
Facile green synthesis of silver nanoparticles using Terminalia bellerica kernel extract for catalytic reduction of anthropogenic water pollutants76
Current-status and applications of polysaccharides in drug delivery systems70
Efficient and reusable polyethylene oxide/polyaniline composite membrane for dye adsorption and filtration56
Removal of aqueous Congo red and malachite green using ackee apple seed–bentonite composite54
Atomic-scale investigation onto the inhibition process of three 1,5-benzodiazepin-2-one derivatives against iron corrosion in acidic environment53
Strategies applied to modify structured and smooth surfaces: A step closer to reduce bacterial adhesion and biofilm formation52
On the use of the Dubinin-Radushkevich equation to distinguish between physical and chemical adsorption at the solid-water interface51
Lipid polymer hybrid nanocarriers: Insights into synthesis aspects, characterization, release mechanisms, surface functionalization and potential implications48
Synthesis of antibacterial, antioxidant and magnetic Nigella sativa-graphene oxide based nanocomposite BC-GO@Fe3O4 for water treatment47
A comprehensive review on techniques to create the anti-microbial surface of biomaterials to intervene in biofouling47
Influence of polyaniline on the photocatalytic properties of metal nanocomposites: A review43
A concise review on electrospun nanofibres/nanonets for filtration of gaseous and solid constituents (PM2.5) from polluted air40
Cubosomes in cancer drug delivery: A review39
Fluorine doped g-C3N4 coupled NiFe2O4 heterojunction: Consumption of H2O2 for production of hydroxyl radicals towards paracetamol degradation38
Hydrogel prepared by 3D printing technology and its applications in the medical field36
Effect of zinc acetate dihydrate concentration on morphology of ZnO seed layer and ZnO nanorods grown by hydrothermal method36
A review on phase-inversion technique-based polymer microsphere fabrication36
Effective removal of nickel ions from aqueous solution using multi-wall carbon nanotube functionalized by glycerol-based deep eutectic solvent35
Green-maturation of Cobalt-Oxide nano-sponges for reinforced bacterial apoptosis34
Bacterial infection microenvironment sensitive prodrug micelles with enhanced photodynamic activities for infection control34
Multi-metal ions doped hydroxyapatite coatings via electrochemical methods for antibacterial and osteogenesis32
Cadmium elimination from wastewater using potato peel biochar modified by ZIF-8 and magnetic nanoparticle31
Rapid removal of methylene blue and nickel ions and adsorption/desorption mechanism based on geopolymer adsorbent30
Correlation of type II adsorption isotherms of water contaminants using modified BET equations30
Fabrication and characterization of mesoporous guar gum/NiWO4 nanocomposite for efficient adsorption of phloxine B and crystal violet from aqueous solution and evaluation of its antioxidant activity29
Green synthesis of controlled size gold and silver nanoparticles using antioxidant as capping and reducing agent29
Hall effects and viscous dissipation applications in peristaltic transport of Jeffrey nanofluid due to wave frame29
Preparation of plasmonic CoS/Ag2WO4 nanocomposites: Efficient visible light driven photocatalysts and enhanced anti-microbial activity29
Fabrication of superhydrophobic Eucalyptus wood surface with self-cleaning performance in air and oil environment and high durability29
Design and synthesis of magnetically separable CuFe2O4/MoS2 p-n heterojunction for photocatalytic efficiency of Rhodamine B degradation28
The roles of gold nanoparticles in the detection of amyloid-β peptide for Alzheimer's disease27
Ionic strength and zeta potential effects on colloid transport and retention processes27
Multifunctional Iron oxide embedded reduced graphene oxide as a versatile adsorbent candidate for effectual arsenic and dye removal26
Adsorption of malachite green in aqueous solution using sugarcane bagasse-barium carbonate composite26
Selective antifungal activity of silver nanoparticles: A comparative study between Candida tropicalis and Saccharomyces boulardii26
Nanoemulsions: Formulation, characterization, biological fate, and potential role against COVID-19 and other viral outbreaks26
Formation of hydrotropic drug/gemini surfactant based catanionic vesicles as efficient nano drug delivery vehicles26
Carbon nanotubes in COVID-19: A critical review and prospects26
Response surface modeling of Orange-G adsorption onto surface tuned ragi husk25
Facile synthesis and characterization of CeO2-Al2O3 nano-heterostructure for enhanced visible-light photocatalysis and bactericidal applications25
Enhanced photocatalytic properties of CeO2/TiO2 heterostructures for phenol degradation24
Antimicrobial silver nanoparticle-photodeposited fabrics for SARS-CoV-2 destruction24
Fabrication of Ag modified SiO2 electrospun nanofibrous membranes as ultrasensitive and high stable SERS substrates for multiple analytes detection24
Nanosecond laser surface texturing of type 316L stainless steel for contact guidance of bone cells and superior corrosion resistance24
Co-sensitization of mesoporous ZnS with CdS and polyaniline for efficient photocatalytic degradation of anionic and cationic dyes24
Fabrication of durable, fluorine-free superhydrophobic cotton fabric for efficient self-cleaning and heavy/light oil-water separation24
Preparation of CuFe2O4/montmorillonite nanocomposite and explaining its performance in the sonophotocatalytic degradation process for ciprofloxacin23
Antibacterial carbon dots/iron oxychloride nanoplatform for chemodynamic and photothermal therapy23
Catalytic and eco-toxicity investigations of bio-fabricated monometallic nanoparticles along with their anti-bacterial, anti-inflammatory, anti-diabetic, anti-oxidative and anti-cancer potentials23
A novel g-C3N4/tourmaline composites equipped with plasmonic MoO3−x to boost photocatalytic activity23
Intelligent design and medical applications of antimicrobial hydrogels22
ZnO NPs incorporated gelatin grafted polyacrylamide hydrogel nanocomposite for controlled release of ciprofloxacin22
Synthesis, micellization behaviour and cytotoxic properties of imidazolium-based gemini surfactants22
Fabrication of BiOI nanosheets with exposed (001) and (110) facets with different methods for photocatalytic oxidation elemental mercury22
Modified gold and polymeric gold nanostructures: Toxicology and biomedical applications21
Fabricating a heavy oil viscosity reducer with weak interaction effect: Synthesis and viscosity reduction mechanism21
Preparation of a NiO-Bi2WO6 catalyst and its photocatalytic oxidative desulfurization performance21
High-performance asymmetric supercapacitor fabricated with a novel MoS2/Fe2O3/Graphene composite electrode21
A novel statistical approach for the synthesis of Chalcones viaClaisen-Schmidt condensation catalyzed by Pd nanoparticles modified mesoporous TiO2 as an efficient heterogeneous catalyst21
New class of composite anion exchange membranes based on Quaternized poly (phenylene oxide) and functionalized boron nitride21
Coupling of nano-spinel MgFe2O4 on Co3O4 for heterogeneous photocatalysis and antibacterial applications: Insights of optoelectrical properties20
Excellent gas-sensitive properties towards acetone of In2O3 nanowires prepared by electrospinning20
Spraying layer-by-layer assembly of tannin-Fe3+ and polyethyleneimine for antibacterial coating20
An overview of the recent advances in functionalization biomass adsorbents for toxic metals removal20
Synthesis of magnetic nano-NiFe2O4 with the assistance of ultrasound and its application for photocatalytic degradation of Titan Yellow: Kinetic and isotherm studies19
Development of porous silver nanoparticle/polycaprolactone/polyvinyl alcohol coatings for prophylaxis in titanium interconnected samples for dental implants19
Nanogold-loaded chitosan nanocomposites for pH/light-responsive drug release and synergistic chemo-photothermal cancer therapy19
Copper(II) complex anchored on magnetic chitosan functionalized trichlorotriazine: An efficient heterogeneous catalyst for the synthesis of tetrazole derivatives19
Exploring the unexplored avenues of surface charge in nano-medicine19
Antibacterial coatings based on microgels containing quaternary ammonium ions: Modification with polymeric sugars for improved cytocompatibility19
Preparation of a novel Poly-chloromethyl styrene chelating resin containing heterofluorenone pendant groups for the removal of Cu (II), Pb (II), and Ni (II) from wastewaters18
Dual functional electrospun nanofiber membrane with ROS scavenging and revascularization ability for diabetic wound healing18
Protein adsorption phenomena in hemodialysis membranes: Mechanisms, influences of clinical practices, modeling, and challenges18
Fabrication of highly uniform Ag nanoparticle-TiO2 nanosheets array hybrid as reusable SERS substrates18
Superhydrophobic graphene aerogel beads for adsorption of oil and organic solvents via a convenient in situ sol-gel method18
Recent advances in utility of artificial intelligence towards multiscale colloidal based materials design18
Nature-inspired design of conical array for continuous and efficient fog collection application18
Enhancement in amoxicillin adsorption and regeneration properties of SBA-15 after surface modification with polyaniline17
Constructing of pH and reduction dual-responsive folic acid-modified hyaluronic acid-based microcapsules for dual-targeted drug delivery via sonochemical method17
On the universality of shapes of the freezing water droplets17
A review on enterosorbents and their application in clinical practice: Removal of toxic metals17
Surface properties of chlorophyll-a sensitized TiO2 nanorods for dye-sensitized solar cells applications17
Investigation on novel Cu2O modified g-C3N4/ZnO heterostructures for efficient photocatalytic dye degradation performance under visible-light exposure17
Advanced nanomaterials utilized as top transparent electrodes in semi-transparent photovoltaic16
Is the Frumkin (Fowler–Guggenheim) adsorption isotherm a two- or three-parameter equation?16
Fast adsorptive removal of cationic organic dye by anionic group functionalized carbon nanotubes with high efficiency16
High diversity of microalgae as a tool for the synthesis of different silver nanoparticles: A species-specific green synthesis16
Co3O4/PANI nanocomposites as a photocatalytic, antibacterial and anticorrosive agent: Experimental and theoretical approach16
Antibacterial, anti-biofilm and angiogenic calcium sulfate-nano MgO composite bone void fillers for inhibiting Staphylococcus aureus infections15
Synthesis and aggregation properties of ethylene glycol ester-based cationic Gemini surfactants15
Propolis-induced exclusion of colloids: Possible new mechanism of biological action15
Design and synthesis of a new high-efficiency CeO2/SnS2/polyaniline ternary composite visible-light photocatalyst15
Integrating gC3N4 nanosheet with MoS2 and ZnO-Ag: Remarkably enhanced photocatalytic performance under visible-light irradiation15
Preparation of graphene-TiO2 photocatalysis materials by laser-induced hydrothermal method15
Fabrication and characterization of a myrrh hydrocolloid dressing for dermal wound healing15
Electrochemical sensing of tyrosine and removal of toxic dye using self-assembled three-dimensional CuBi2O4/rGO microsphere composite15
Tailoring the dispersibility of non-covalent functionalized multi-walled carbon nanotube (MWCNT) nanosuspension using shellac (SL) bio-resin: Structure-property relationship and cytotoxicity of shella15
Highly sensitive and selective “turn-off” fluorescent probes based on coumarin for detection of Cu2+15
Improved corrosion protective performance of hybrid silane coatings reinforced with nano ZnO on 316 L stainless steel15
Heterogeneous Ag@ZnO nanorods decorated on polyacrylonitrile fiber membrane for enhancing the photocatalytic and antibacterial properties15
Pushing the boundaries of heavy metal adsorption: A commentary on strategies to improve adsorption efficiency and modulate process mechanisms15
Microwave-assisted solvothermal synthesis of defective zirconium-organic framework as a recyclable nano-adsorbent with superior adsorption capacity for efficient removal of toxic organic dyes14
Selectivity oxidation of benzyl alcohol using mesoporous g-C3N4 catalysts prepared by hard template method14
Eco-friendly synthesis and characterization of Aloe vera/Gum Arabic/silver nanocomposites and their antibacterial, antibiofilm, and wound healing properties14
Understanding multiscale assembly mechanism in evaporative droplet of gold nanorods14
Layer-by-layer self-assembly of giant polyelectrolyte microcapsules templated by microbubbles as potential hydrophilic or hydrophobic drug delivery system14
Nano flake Ag3PO4 enhanced photocatalytic activity of bisphenol A under visible light irradiation14
Complex interplay between colloidal stability, transport, chemical reactivity and magnetic separability of polyelectrolyte-functionalized nanoscale zero-valent iron particles (nZVI) toward their envir14
Direct synthesis of amphiphilic polyvinylpyrrolidone-capped gold nanoparticles in chloroform14
Carbon dot with aggregation induced emission and pH triggered disintegration14
Critical insights into the limitations and interpretations of the determination of ∆Go, ∆Ho, and ∆So of sorption of aqueous pollutants on different sorbents13
Study on anti-corrosion performance and mechanism of epoxy coatings based on basalt flake loaded aniline trimer13
Enzyme modified CNTs for biosensing application: Opportunities and challenges13
Facile synthesis of tannic acid modified NbTe2 nanosheets for effective photothermal ablation of bacterial pathogens13
Microstructure, synergistic mechanism and corrosion behavior of tin oxide conversion film modified by chitosan on aluminum alloy surface13
Effects of anti-clay agents on bubble size distribution and stability of aqueous foam under pressure for earth pressure balance shield tunneling13
Study on the improvement of PVDF flat ultrafiltration membrane with MWCNTs-OH as the additive and the influence of different MWCNTs-OH scales13
Preparation methods of cellulose nanocrystal and its application in treatment of environmental pollution: A mini-review13
Direct surface modification of nanodiamonds with ionic copolymers for fast adsorptive removal of copper ions with high efficiency13
How does photocatalytic activity depend on adsorption, composition, and other key factors in mixed metal oxide nanocomposites?13
The effect of microemulsion on coal wetting characteristics and physicochemical structure13
Aqueous Cr (VI) removal performance of an invasive plant-derived biochar modified by Mg/Al-layered double hydroxides13
ZIF-8-derived ZnO/C decorated hydroxyl-functionalized multi-walled carbon nanotubes as a new composite electrode for supercapacitor application13
Mussel-inspired synthesis of magnetic N-Halamine nanoparticles for antibacterial recycling13
A novel fluorescent DNA sensor system based on polydopamine modified MgAl-layered double hydroxides13
The dual role of Au nanoparticles in the surface plasmon resonance enhanced photocatalyst Au/g-C3N413
Effect of polysaccharide polymers on the surface and foam properties of aqueous film-forming foam12
Poisoning effect of K with respect to Cu/ZSM-5 used for NO reduction12
A low-cost, composite collagen-PDMS material for extended fluid retention in the skin-interfaced microfluidic devices12
Realization of UV-C absorption in ZnO nanostructures using fluorine and silver co-doping12
Hybrid mesoporous nanoparticles with highly integrated polydopamine for pH-responsive membrane permeation and drug delivery12
Facile preparation of floatable carboxymethyl cellulose-based composite hydrogel for efficient removal of organic dyes12
Chitosan regulated electrochemistry for dense hydroxyapatite/MgO nanocomposite coating with antibiosis and osteogenesis on titanium alloy12
Anticorrosion performance of hydrophobic acid-modified-MOFs/epoxy coatings12
Research on the influence of Micro-morphology on the hydrophobicity of material surface12
Mini review of synthesis strategies of silver nanowires and their applications12
Flow regimes of polymeric fluid droplet formation in a co-flowing microfluidic device12
Polymer mediated synthesis of cationic silver nanoparticles as an effective anti-fungal and anti-biofilm agent against Candida species12
A surface control strategy of CeO2 nanocrystals for enhancing adsorption removal of Congo red12
Wettability enhancement of hydrophobic artificial sandstones by using the pulsed microwave plasma jet12
Effective removal of methylated phenol and chlorinated phenol from aqueous solutions using a new activated carbon derived from Halodule uninervis waste12
PEGylated Mn containing MOF nanoparticles for potential immunotherapy of pancreatic cancer via manganese induced activation of anti-tumor immunity12
Biocomposite spheres based on aluminum oxide dispersed with orange-peel powder for adsorption of phenol from batch membrane fraction of olive mill wastewater11
Choice of the functional monomer of molecularly imprinted polymers: Does it rely on strong acid-base or hydrogen bonding interactions?11
Hypercrosslinked mesoporous polymers: Synthesis, characterization and its application for catalytic reduction of 4-nitrophenol11
Adsorptive stripping voltammetry at microporous carbon: Determination and adsorption characteristics of environmental contaminants11
Zn/Ce metal-organic framework-derived ZnO@CeO2 nano-heterojunction for enhanced photocatalytic activity11
Thin copper hybrid structures by spray-assisted layer by layer chemical deposition on fabric surfaces for electromagnetic interference shielding11
Facile fabrication of ZnAl layered double hydroxide film co-intercalated with vanadates and laurates by one-step post modification11
Fabrication of self-recovering superhydrophobic Cu-CNTs composite coatings via co-electrodeposition: Wettability transition is due to spontaneous adsorption of airborne hydrocarbons11
Preparation of a novel sludge-derived biochar by K2FeO4 conditioning to enhance the removal of Pb2+11
Preparation of thiosemicarbazide-modified polyvinyl alcohol and its selective adsorption of Cu(II)11
Synthesis and intracellular drug delivery applications of hyperbranched polymers functionalized β-cyclodextrin10
Fe3O4@SiO2 nanoparticles-supported Cu(II) complex: An efficient and reusable nanocatalyst for treating environmental pollutants in aqueous medium10
Nanocomposites: Potential therapeutic agents for the diagnosis and treatment of infectious diseases and cancer10
Remodelling 3D printed GelMA-HA corneal scaffolds by cornea stromal cells10
Fabrication of Ag nanoparticles supported on amino-functionalized peeled-watermelon structured silica-coated nano-Fe3O4 with enhanced catalytic activity for reduction of 4-nitrophenol10
Boosting solar driven hydrogen evolution rate of CdS nanorods adorned with MoS2 and SnS2 nanostructures10
Sialic acid-imprinted mesoporous nanocarriers for tumor cell targeted drug delivery10
Influence of the functionalization agent and crystalline phase of MnO2 Janus nanomaterials on the stability of aqueous nanofluids and its catalytic activity to promote asphaltene oxidation10
CuxO thin films via ultrasonic spray pyrolysis as efficient solar photocatalysts: Single source polymeric coordinated precursor10
Design and fabrication of functional hydrogels with specific surface wettability10
Droplet impact on groove-patterned surfaces: The role of the groove patterns and impact velocities10
Self-dispersible fluorescent probe with aggregation-induced emission feature for sequence detection of Fe3+ and Ca2+10
The feasible photoanode of graphene oxide/zinc aluminum mixed metal oxides for the dye-sensitized solar cell10
Comparing the performance of the peroxymonosulfate/Mn3O4 and three-dimensional electrochemical processes for methylene blue removal from aqueous solutions: Kinetic studies10
Enhanced photocatalytic behavior of ZnO nanorods decorated with a Au, ZnWO4, and Au/ZnWO4 composite: Synthesis and characterization10
Microstructure and local electrophysical properties of sol-gel derived (In2O3-10%SnO2)/V2O5 films10
Synthesis and properties of novel crosslinking anion exchange membranes based on quaternary poly(fluorene-piperidine)9
Progress in the development and application of transitional technology of surface-enhanced Raman spectroscopy9
Synthesis of resorcinol-functionalized multi-walled carbon nanotubes as a nanoadsorbent for the solid-phase extraction and determination of diclofenac in human plasma and aqueous samples9
Preparation of porous carbon materials by polyphosphazene as precursor for sorption of U(VI)9
Numerical investigation of falling ferrofluid droplets under magnetic fields9
Architecting water-dispersible organic nanopowder from volatile microemulsion: An emerging colloidal technology9
NiFeP nanocubes as advanced electrode material for hydrogen evolution and supercapacitor9
An efficient and inexpensive method for functionalizing metallic biomaterials used in orthopedic applications9
Infection microenvironment-responsive multifunctional peptide coated gold nanorods for bimodal antibacterial applications9
Cooperative enhancement of fungal repelling performance by surface photografting of stereochemical bi-molecules9
Biofabricated smart-nanosilver: Promising armamentarium for cancer and pathogenic diseases9
A polydopamine-coated mesoporous nanocomposite with robust affinity to horseradish peroxidase based on catecholic adhesion9
Lithography-based 3D printed hydrogels: From bioresin designing to biomedical application9
Confined evaporation-induced self-assembly of colloidal lignin particles for anisotropic adhesion9
Additive and subtractive modification of butterfly wing structural colors9
Electrically facilitated mineralization of osteoblasts and polypyrrole micro-bowl coatings for promotion of the osteogenic activity9
Stimuli-responsive Supramolecular Gels Based on the Self-Assembly of stigmasterol-ferrocene derivative9
Role of anionic surfactant in the generation of bulk nanobubbles by ultrasonication9
Low friction thermoplastic polyurethane coatings imparted by surface segregation of amphiphilic block copolymers9
Spectroscopic investigation on the affinity of SARS-CoV-2 spike protein to gold nano-particles9
Dynamically crosslinked protien hydrogel composite as multifunctional wound dressing for cutaneous infection9
Fabrication of molecularly porous hyper-cross-linked thin film composite nanofiltration membrane using cyclic amine and linear cross-linker for highly selective organic solvent nanofiltration9
Prediction of maximum spreading factor after drop impact: Development of a novel semi-analytical model incorporating effect of surface roughness8
Three dimensional star-like mesoporous nitrogen-doped carbon anchored with highly dispersed Fe and Ce dual-sites for efficient oxygen reduction reaction in Zn-air battery8
Emulsifying properties of sugar-based surfactants prepared by chemoenzymatic synthesis8
Dy3+ doped Y2MoO6 nanopowders for white light emission: Spectroscopic and transport properties for optoelectronic and energy harvesting applications8
Antibacterial effect of ciprofloxacin loaded reduced graphene oxide nanosheets against Pseudomonas aeruginosa strain8
Removal of 1-Butyl-3-methylimidazolium bromide from an aqueous solution by using a spongy chitosan-activated carbon composite8
Self-assembled peptide fibrils with pH-sensitive reversible surface-active properties8
Behavior of ZnO nanoparticles in glycine solution: pH and size effect on aggregation and adsorption8
Surface activity of the oat, horse chestnut, cowherb, soybean, quinoa and soapwort extracts – Is it only due to saponins?8
Effect of clinoptilolite natural zeolite particles on the destabilization of the oil-in-water emulsion8
Solution properties of mixed system containing butynediol-ethoxylate polysiloxanes and polyether trisiloxane surfactant8
Effect of infrared radiation on interfacial water at hydrophilic surfaces8
Polymer nanotube membranes synthesized via liquid deposition in anodic alumina8
UV radiation effect on the microstructure and performance of electrocatalysts based on small Pt nanoparticles synthesized in the liquid phase8
Direct combustion of wet/dry solution-impregnated cigarette butts for nano-FeOx synthesis: Effects of combustion conditions and NO reduction ability8
Impact of cobalt doping on structural and magnetic properties of zinc oxide nanocomposites synthesized by mechanical ball-milling method8
Whey protein directed in vitro vaterite biomineralization: Influence of external parameters on phase transformation8
Physical disruption of gel particles on the macroscale does not affect the study of protein gel structure on the micro or nanoscale8
Promoted catalytic activity of CO oxidation at low temperatures by tuning ZnO morphology for optimized CuO/ZnO catalysts7
Construction of 3D marigold-like direct Z-scheme heterojunction In2O3/CdS with boosted photocatalytic degradation of antibiotics under visible light7
Hamaker functions for kaolinite and montmorillonite7
Biaxial nanowrinkling in cholesteric surfaces: Egg carton surfaces through chiral anchoring7
Anchoring polyethylene glycol to the ocular surface by phenylboronic acid functionalization: Implications for fabrication of long-acting artificial tears7
A novel (α-β)NiS/Ni3S4-rGO electrode material for supercapacitors7
Numerical simulation and experimental study of the electroosmotic flow in open microfluidic chip based on super-wettability surface7
The wetting transition of low surface tension droplet on the special-shaped microstructure surface7
Fabrication of silica supported Turkevich silver nanocomposites for efficient photocatalytic performance7
Multifunctional coatings for mitigating bacterial fouling and contamination7
Facile preparation of nitrogen and FeSx codoped porous carbon with high catalytic activity under alkaline condition7
Can the argon plasma “Grafting-From” approach be used for the modification of nanoparticle systems?7
Mini-review of the microscale phenomena during emulsification of highly concentrated emulsions7
A new supramolecular natural product gel based on self-assembled pomolic acid from traditional Chinese medicine7
Tension and bending of the particle raft driven by a magnet7
TiO2/PKSAC functionalized with Fe3O4 for efficient concurrent removal of heavy metal ions from water7
Self-assembly of delaminated layered double hydroxide nanosheets for the recovery of lamellar structure7
Interfacial self-assembly of ultrathin polydiacetylene/graphene oxide nanocomposites: A new method for synergetic enhancement of surface charge transfer without doping7
Preparation of activated carbon and its adsorption of naphthalene in liquid paraffin oil7
Effects of precursors on the phase, magnetic and photocatalytic properties of nano Fe2O3 synthesized by low temperature calcination7
Synthesis of the hydrophilic additive by grafting glycidyloxypropyl trimethoxysilane on hydrophilic nanosilica and its modification by using dimethyl propionic acid for self-cleaning coatings7
Dual-functionalized titanium for enhancing osteogenic and antibacterial properties7
Nitric oxide pretreatment enhances ofloxacin susceptibility of biofilm concomitant with exopolysaccharide depletion7
Mechanochemical activation of zero-valent iron on carbonized boron-doped graphene dots for enhanced sonochemical dyes removal7
Molten salt synthesis and characterization of 1D sodium hexatitanate nanowires7
Protein corona reduced graphene oxide cytotoxicity by inhibiting endocytosis7
The radiation-induced preparation of ultrasmall gold nanoparticles in Au(III) complexes with units of poly(1-vinyl-1,2,4-triazole) and poly(1-vinyl-1,2,4-triazole) – poly(acrylic acid)7
Effects of several polysaccharides on rheological properties of scallop (Patinopecten yessoensis) male gonad hydrolysates7
Internalization and induction of defense responses in tobacco by harpin conjugated gold nanoparticles as a foliar spray7
Co3O4/carbon nanohybrids embedded in the fibrous scaffolds promote stem cell osteogenic differentiation via strengthening cell mechanotransduction7
Double hit strategy using pH-sensitive liposomes containing doxorubicin and pheophorbide-a for combination tumor therapy6
ZnO nanocluster loaded superparamagnetic iron oxide nanocomposites as recyclable antibacterial agent6
Colloidal latex / liquid crystal coatings for thermochromic textiles6
Development of new adsorbents via microwave treatment magnetic PET synthesis from waste PET and investigation of TC removal6
Solid-phase interfacial synthesis of dual-imprinted colloid particles for multifunctional nanomedicine development6
Сolloidal probe based on iron(III)-doped calcium phytate nanoparticles for 31P NMR monitoring of bacterial siderophores6
Numerical study on surface-heterogeneity-induced anisotropic impact dynamics of droplet6
Effects of ionic surfactants on the nucleation and growth of cyanidin 3,5-di-O-glucoside capped zerovalent iron nanoparticles6
Efficient iodine capture by a sesbania gum-based polymeric adsorbent for reutilization in bacterial decontamination6
Visible light driven oxidation of harmful 2-Chloroethyl ethyl sulfide using SiO2-TiO2 composite particles and air6
0.027299880981445