Engineering Science and Technology-An International Journal-Jestech

Article	Citations
Editorial Board	153
Application of grey-based fuzzy logic algorithm in MIG welding-A case study	126
The effects of the cross-section shape of the surface-mounted cylinder on the free convective junction flow	111
Digital signatures over HMAC entangled chains	78
Study on thermal performance and simulation method of oil medium steel-BMC mechanical joints	77
Multibeam-based mmWave segmented beamforming array system for high efficiency and secure communication	61
A dual-band microwave sensor for glucose measurements utilizing an enclosed split ring metamaterial-based array	49
Editorial Board	49
Real time non-invasive monitoring of glucose and nitrogen sources with a novel window sliding based algorithm	48
A multi-model approach for distance and angle estimation using a custom-designed tag	44
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	43
Unloading sequence planning for autonomous robotic container-unloading system using A-star search algorithm	43
A mathematical framework for link failure time estimation in MANETs	39
A design of higher-level control based genetic algorithms for wastewater treatment plants	38
Output current boosting in triboelectric nanogenerators for applications in self-powered energy systems	37
An efficient design methodology to speed up the FPGA implementation of artificial neural networks	36
Editorial Board	35
Editorial Board	33
06 February 2023 Kahramanmaraş earthquakes (Mw = 7.8 and 7.6) field observations and preliminary assessment report	32
Gaussian bare-bones Levy circulatory system-based optimization for power flow in the presence of renewable units	31
Study of the possibility of using phosphorous slags in road construction	31
Time response optimal rational approximation: Improvement of time responses of MSBL based approximate fractional order derivative operators by using gradient descent optimization	31
Classification of numerical, experimental, and analytical approaches for gearbox oil flow and no-load gear power loss	31
Vibration data-driven anomaly detection in UAVs: A deep learning approach	30
Passive flow control devices for road vehicles: A comprehensive review	28

Optimizing the thermophysical properties and combustion performance of biodiesel by graphite and reduced graphene oxide nanoparticle fuel additive	28
Magnetic gearbox for automotive power transmissions: An innovative industrial technology	26
A novel lightweight model for tea disease classification based on feature reuse and channel focus attention mechanism	26
Finite element analysis for partly using MONEL 400 material in plastic injection tile spacer holder mold for ceramic tiles	26
High-gain adaptive observer for floating voltages estimation and capacitor aging monitoring in multicell converters	26
Development of an analytical model to predict the churning power losses of an orthogonal face gear	25
Investigating the effects of Gaussian noise on epileptic seizure detection: The role of spectral flatness, bandwidth, and entropy	25
Development of high-speed scanning acoustic microscopy system: Simplified design and stabilization	24
Low-profile dual-polarized differential-fed filtering antenna and its novel array with low sidelobe level	24
Controls on the geotechnical properties of plastic-bonded pavement blocks produced by artisanal means in Bamenda, Cameroon	24
Eliminating surface cracks in metal film-polymer substrate for reliable flexible piezoelectric devices	24
Control strategies and experimental validation for high-gain non-isolated double inductor boost converter	24
Small-signal modeling and characteristic comparative analysis for a single grid-connected grid-forming VSG with full-order and second-order	23
Editorial Board	23
Experimental and FE studies on the bonding performance of basalt FRP bonded to notched concrete beams and improving with anchorage	23
A gripper for delicate edible manipulation	22
Energy efficiency and transient-steady state performance comparison of a resistance infant incubator and an improved thermoelectric infant incubator	21
Bending fatigue properties of structural steel fabricated through wire arc additive manufacturing (WAAM)	21
Effect of Co addition on microstructure and mechanical properties of new generation 3Cr-3W and 5Cr-3W steels	20
Perfomance of a borehole heat exchanger: The influence of thermal properties estimation under tidal fluctuation	20
Sizing of interoperable EV charging stations on highways with a coordinated charging scheduling strategy	20
Low-power and low glitch area current steering DAC	20
GIAE-Net: A gradient-intensity oriented model for multimodal lung tumor image fusion	20
BrainPixGAN: Generating intraoperative MRI images with mask-based generative networks	20
Methodology for determining the threshold distance for estimating the main EM exposure contribution in WLAN	20
Hybrid photovoltaic and thermoelectric generator systems with thermal wheel Ventilation: A sustainable approach to residential heating and cooling	19
Revolutionary text clustering: Investigating transfer learning capacity of SBERT models through pooling techniques	19
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	19
A low-cost high-speed radix-4 Montgomery modular multiplier without carry-propagate format conversion	19
An obstacle-avoidance inverse kinematics method for robotic manipulator in overhead multi-line environment	18
Innovative agricultural ontology construction using NLP methodologies and graph neural network	18
Artificial intelligence approach to magnetohydrodynamic flow of non-Newtonian fluids over a wedge: Thermophoresis and Brownian motion effects	18
Fast traffic processing in multi-tenant 5G environments: A comparative performance evaluation of P4 and eBPF technologies	18
Mechanical response and blast resistance evaluation of prefabricated frame tunnels with steel box joints under internal explosion	18
Full-duplex cooperative relaying with NOMA for the performance enhancement of underwater acoustic sensor networks	17
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	17
EMTL-Net: Boosting segmentation quality in histopathology images of gland and nuclei by explainable multitask learning network as an optimized strategy	17
Efficiency analysis of solar farms by UAV-based thermal monitoring	17
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	16
Time–frequency ensemble network for wind turbine mechanical fault diagnosis	16
Design of an Omega Phi-shaped Tri band metamaterial absorber with sensing application	16
Editorial Board	16
Age-gender specific prediction model for Parkinson’s severity assessment using gait biomarkers	16
Editorial Board	15
Laser welding defects detection in lithium-ion battery poles	15
Novel fuzzy 1PD-TI controller for AGC of interconnected electric power systems with renewable power generation and energy storage devices	15
Design and real-time implementation of a sliding mode observer utilizing voltage signal injection and PLL for sensorless control of IPMSMs	15
Experimental analysis of phase shift modulation methods effects on EMI in dual active bridge DC-DC converter	15
Sensorless direct torque control based on seven-level torque hysteresis controller for five-phase IPMSM using a sliding-mode observer	15
Arabic sentiment analysis using GCL-based architectures and a customized regularization function	15

Experimental optimization of displacer working gap in a gamma-type Stirling engine	15
Corrigendum to “A prediction model for the performance of solar photovoltaic-thermoelectric systems utilizing various semiconductors via optimal surrogate machine learning methods” [Eng. Sci. Technol.	15
Symbol error probability optimization in cognitive amplify and forward cooperative relaying networks	14
Progressing of Kovacs model for conductivity of graphene-filled products by total contact resistance and actual filler amount	14
An experimental study on the ballistic performance of ultra-high hardness armor steel (Armox 600T) against 7.62 mm × 51 M61 AP projectile in the multi-hit condition	14
A Novel Adaptive Interpolation Approach for the Implementation of Operating-Speed-Dependent Motion Profiles in Processing Machines	14
The detection of unaccounted natural gas consumption: A neural networks and subscriber-based solution	14
Quantifying the impact of construction defects on square RC columns	14
Cryptanalyzing a bit-level image encryption algorithm based on chaotic maps	14
Memory-driven deep-reinforcement learning for autonomous robot navigation in partially observable environments	13
Research on weakly conservative passive fault-tolerant control method considering the fault distribution	13
Precise torque control for interior mounted permanent magnet synchronous motors with recursive least squares algorithm based parameter estimations	13
Full-state feedback LQR with integral gain for control of induction heating of steel billet	13
Ballistic performances of Ramor 500, Armox Advance and Hardox 450 steels under monolithic, double-layered, and perforated conditions	13
Genetic based density peak possibilistic fuzzy c-means algorithms to cluster analysis- a case study on customer segmentation	13
The influence of n-pentanol blending with gasoline on performance, combustion, and emission behaviors of an SI engine	13
HY-Deepnet : A new Optimal Deep transfer learning empowered framework for an autonomous Alzheimer’s disease detection and diagnosis system	13
Nanofluids stability on amino-silane and polymers coating titanium dioxide and zinc oxide nanoparticles	13
Investigating the impact of post-processing techniques on surface morphology and wettability of Inconel 718 components fabricated via selective laser melting	13
Evaluation of a sustainable dye-exhausted resin regeneration method for cost-effective decolorization and detoxification of textile wastewater	13
Highly sensitive miniaturized labyrinth shape circular split ring resonator (LC-SRR) based microwave sensor for low permittivity characterization applications	13
Binary classification of Low-Rate DoS attacks using Long Short-Term Memory Feed-Forward (LSTM-FF) Intrusion Detection System (IDS)	13
Powder metallurgical fabrication of graphene reinforced near-eutectic Al-Si matrix composites: Microstructural, mechanical and electrochemical characterization	13
Flow index-liquid limit relationship by fall-cone tests in clay-sand mixtures	13
Artificial intelligence analysis of thermal energy for convectively heated ternary nanofluid flow in radiated channel considering viscous dissipations aspects	13
Design and real-time implementation of a robust fractional second-order sliding mode control for an electromechanical system comprising uncertainties and disturbances	12
Editorial Board	12
Potential use of graphene oxide as an engine oil additive for energy savings in a diesel engine	12
Joint sensitivity analysis method of impeller aerodynamic performance to key geometric errors of five-axis machine tool	12
Chemically reactive magnetized flow of viscoplastic nanofluid through a vertical cone considering non-Darcy porous media	12
An efficient approach for no-reference image quality assessment based on statistical texture and structural features	12
Influence of clay mineralogy on undrained cyclic strength of sand with fines	12
Long-term image-based vehicle localization improved with learnt semantic descriptors	12
State-of-the-art review of contact and friction analysis with a spherical hinge and structural stability research on horizontal rotating bridges	12
A sustainable approach for the utilization of PPE biomedical waste in the construction sector	12
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	12
Evaluation of pull out behavior of plain and deformed steel bars in tire shred –sand mixture using large scale model	11
Optimal location of accurate HVDC and energy storage devices in a deregulated AGC integrated with PWTS considering HPA-ISE as performance index	11
A hybrid CNN+LSTM-based intrusion detection system for industrial IoT networks	11
Editorial Board	11
Hybrid coati–grey wolf optimization with application to tuning linear quadratic regulator controller of active suspension systems	11
Emotion recognition based on EEG feature maps through deep learning network	11
Ciliary peristalsis flow of hydromagnetic Sutterby nanofluid through symmetric channel: Viscous dissipation in case of variable electrical conductivity	11
High-gain mmWave shorted rectangular ring antenna with complementary segmented-cavity backed structure	11
Non-linear site response and liquefaction analysis of soil site in Kahramanmaras during the Mw 7.7 and Mw 7.6 Turkey earthquakes	11
Planning and protection of DC microgrid: A critical review on recent developments	11
Solar thermal waste heat energy recovery in solar distillation systems by using thermoelectric generators	11
Heuristic optimization based dynamic weighted state feedback approach for 2DOF PI-controller in automatic voltage regulator	11
Influence of various fibers on the physico-mechanical properties of a sustainable geopolymer mortar-based on metakaolin and slag	11
Asymmetric coplanar strip based stepped monopole sensor for liquid permittivity measurements	10
FABLDroid: Malware detection based on hybrid analysis with factor analysis and broad learning methods for android applications	10
Circular-ring tied arc loaded excellent metamaterial absorber for EMI shielding of Wi-Fi signal and impurity sensing of cooking oil	10
Q-PIR: A quantile based Pareto iterative refinement approach for high-level synthesis	10
Natural and mixed convection in a vertical water-flow chamber in the presence of solar radiation	10
Experimental investigation of the performance and energy consumption efficiency of elliptical gear hydraulic pump and evaluation by Taguchi method	10
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	10
Retraction notice to “Multi-objective scheduling and optimization for smart energy systems with energy hubs and microgrids” [Eng. Sci. Technol. Int. J. 51 (2024) 101649]	10
Editorial Board	9
Adaptive strategies and thermal perceptions in intermittently used congregational Spaces: A case study	9
Assessment of reinforced concrete building damages following the Kahramanmaraş earthquakes in Malatya, Turkey (February 6, 2023)	9
Grey Wolf Algorithm-Based source size and location determination method for capacity expansion planning in power systems	9
Design of lateral dynamic control objectives for multi-wheeled distributed drive electric vehicles	9
Enhancing performance of shipboard photovoltaic grid-connected inverter through CRNN-LM-BP control optimized by particle swarm optimization of LCL parameters	9
Investigation of subcrestally placed dental implants with and without apical cortical bone anchorage under conventional or immediate loading	9
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	9
RNE-DSNet: A Re-parameterization Neighborhood Enhancement-based Dual-Stream Network for CT image recognition	9
Assessment of sustainable expanded glass granules for enhancing shallow soil stabilization and dynamic behaviour of clay through resonant column tests	9
The Effect of Conducted Emissions of Grid-Tied Three-Phase Adjustable Drives	9
A hyper-heuristic based reinforcement-learning algorithm to train feedforward neural networks	9
Erosion development in AISI 316L stainless steel under pulsating water jet treatment	9
Corrigendum to “A compact complementary split ring resonator (CSRR) based perfect metamaterial absorber for energy harvesting applications” [Eng. Sci. Technol. Int. J. 45 (2023) 101473]	9
Mechanical durability and degradation characteristics of long kenaf-reinforced PLA composites fabricated using an eco-friendly method	9
Editorial Board	9
Mechanism of resistance to deformation for damaged mechanical elastic wheel: Rubber damage research based on peridynamic	9
Effect of reverse-polarity hot wire on the tandem arc welding process	9
Heat transfer characteristics of a periodically transient flow for turbulent wall-bounded dual jet	9
A novel optimal PIλDND2N2 controller using coyote optimization algorithm for an AVR system	9
Design and development of a lightweight, low-cost cylindrical electrostatic clutch	9
Optimizing nutrient supplementation strategies for sustainable biological treatment of textile wastewater	9
Novel distance-fitness learning scheme for ameliorating metaheuristic optimization	9

Electrochemical investigation of Pd-Au/BC nanocomposite-biochar and their photocatalytic and energy storage applications	9
Instantaneous contact area-based model for shear strength sensitive cutting coefficients characterization of anisotropic parts	8
Optimization and mass transfer analysis under the ribs of multi-serpentine flow fields	8
On the free vibration of a perforated Rayleigh beam with deformable ends	8
Novel electric arc current emulation system for low-voltage grids	8
A new approach for measuring the wetting angles of lead-free solder alloys from digital images	8
On the use of distributed hydrologic model for filling large gaps at different parts of the streamflow data	8
Machine learning-based approaches for handover decision of cellular-connected drones in future networks: A comprehensive review	8
Effect of Dual Three-Phase configurations and interleaved carrier-based PWM techniques on the DC-Link current stress	8
An extensive analysis of power converter architectures for grid-connected solar photovoltaic driven electric vehicles (EVs)	8
Mini/Micro UAV detection in the presence of ISM or spurious signals and an experimental application on an SDR	8
Exploring the tribo-mechanical performance of Ti-Mo-Zr-Ta-Sn alloys with a focus on their suitability for biomedical use	8
Enhancement in the electrical efficiency of a photovoltaic thermal system through ternary nanofluids application: Nanomaterial shape effects and phase change material encased in a rectangular block	8
Lightweight design of mountaineering protection gear: Procedure, Optimization, and Testing	8
Visible and infrared image fusion using an efficient adaptive transition region extraction technique	8
Etching-free fabrication method for silver nanowires-based SERS sensors for enhanced molecule detection	8
Durability of preflex beam under cyclic loading	8
Influence of palm oil fuel ash on the high strength and ultra-high performance concrete: A comprehensive review	7
Weld joint characterization in ultrasonic welding of phosphor bronze sheets	7
Nickel recovery in ferronickel concentrate by green selective reduction of nickel laterite	7
Investigation on the performance of reinforced concrete columns jacketed by conventional concrete and geopolymer concrete	7
Development of low-profile spectral signature chipless flexible RFID prototype for 5G supply chain IoT applications	7
Deep reinforcement learning approach for multi-hop task offloading in vehicular edge computing	7
Graph-based Turkish text normalization and its impact on noisy text processing	7
Differential evolution-based neural architecture search for brain vessel segmentation	7
Experimental analysis of a statistical multiploid genetic algorithm for dynamic environments	7
Effect of polarization potential on tribocorrosion behavior of duplex stainless steel UNS S32205 in NaCl solution	7
BA-AMST: A blockchain-assisted anonymous and multi-keyword searchable-traceable data sharing system in Industrial Internet of Things	7
An effective analog circuit design of approximate fractional-order derivative models of M-SBL fitting method	7
MHD nanofluid flow between porous convergent-divergent channel with velocity slip and nanoparticle aggregation	7
Highly selective multiple-notched UWB-MIMO antenna with low correlation using an innovative parasitic decoupling structure	7
Design of high uniform magnetic field with four coils based on improved wolf pack algorithm	7
A novel model for higher performance object detection with deep channel attention super resolution	7
Experimental evaluation for potential drop in refrigerants under high-ambient conditions	7
Thermal spray copper-based coatings against contamination of thermoplastic surfaces: A systematic review	7
RETRACTED: A prediction model for the performance of solar photovoltaic-thermoelectric systems utilizing various semiconductors via optimal surrogate machine learning methods	7
Editorial Board	7
Increasing the energy efficiency of the multi-motor traction electric drive of an electric locomotive for railway quarry transport	6
Early and long-term performance evaluation of low NaOH concentrated waste HBP-GGBS based alkali activated composites	6
Interpolated binary search: An efficient hybrid search algorithm on ordered datasets	6
A novel method for measuring inductances and analysis of shaded-pole motors	6
Towards enhanced photovoltaic Modeling: New single diode Model variants with nonlinear ideality factor dependence	6
Dielectrophoresis-based discrimination of hepatic carcinoma cells following treatment with cytotoxic agents	6
Experimental investigation of the effect of nano fluid use on heat transfer in unmanned aircraft cooling system with different types of wing geometry	6
Thermohydraulic performance evaluation of a heat exchanger mounted with oval inclined twisted rings	6
Rigorous design and experimental validation of non-reciprocal bandpass filter with ultrawide high reverse isolation bandwidth	6
Assessment of innovative dented sheet liner on the improvement of hydraulic properties of pervious concrete pile	6
Marked social networks: A new model of social networks based on dynamic behaviors	6
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	6
Designing a unified damping and cross-coupling rejection controller for LCL filtered PV-based islanded microgrids	6
Double-hierarchical fuzzy exponential convergence law fractional-order sliding mode control for PMSM drive control in EV	6
Significantly improved shear, dynamic-mechanical, and mode II fracture performance of seawater aged basalt/epoxy composites: The impact of halloysite nanotube reinforcement	6
In-service weld repair by direct deposition: Numerical simulation and experimental validation	6
An innovative data collection method to eliminate the preprocessing phase in web usage mining	6
The effect of number of nanoparticles on atomic behavior and aggregation of CuO/water nanofluid flow in microchannels using molecular dynamics simulation	6
IoT integrated adaptive fault tolerant control for induction motor based critical load applications	6
An advanced hybrid pre-filtering/in-loop-filtering based PLL under adverse grid conditions	6
Design of efficient bi-orthogonal wavelets for EEG-based detection of Schizophrenia	6
Development of an efficient design optimization strategy for thick-walled cylinders treated with combinations of autofrettage, shrink-fit and wire-winding processes	6
Utilization of waste coal flotation concentrate for copper matte smelting	6
Analysis of construction and demolition waste prediction post-earthquake disasters	6
Low complexity reconfigurable modified FRM architecture with full spectral utilization for efficient channelizers	6
RETRACTED: Multi-objective scheduling and optimization for smart energy systems with energy hubs and microgrids	6
An IEEE single-precision arithmetic based beamformer architecture for phased array ultrasound imaging system	6
Surface roughness impact on the performance of the 3D metal printed waveguide coupler at millimeterwave band	5
Computation of Fe3O4-CoFe2O4 hybrid nanofluid flow in stretchable (Shrinkable) wedge with Variant magnetized force and heat generation	5
Pyrolysis characteristics and kinetic analysis of coconut shell and nutmeg shell for potential source of bioenergy	5
Development of bi-directional switched-capacitor DC-DC converter for EV powertrain application	5
Editorial Board	5
Adaptive coordinated control for an under-actuated airplane–tractor system with parameter uncertainties	5
Dynamic well killing method based on Y-tube principle when the drill bit is off-bottom	5
Effects of CuO, TiO2 and graphite microparticles on the heat transfer properties of greases	5
Determination of ballistic properties of densified reinforced laminated wood material	5
Novel hVsaGwo algorithm for non-linear dynamic weighted state feedback with 1DOF-PID based controllers in AVR	5
Correlation between material properties and free vibration characteristics of TIG and laser welded stainless steel 304 reinforced with Al2O3 microparticles	5
A hybrid computational approach for modeling cold spray deposition	5
A metasurface-inspired printed monopole antenna for 5G and RF energy harvesting application	5
An interestingness measure for knowledge bases	5
Novel calibration method for improved UWB sensor distance measurement in the context of application for 3D analysis of human movement	5
Classification of gear faults in internal combustion (IC) engine gearbox using discrete wavelet transform features and K star algorithm	5
An optimized spatial target trajectory prediction model for multi-sensor data fusion in air traffic management	5
Feedback-linearization based robust relatively optimal trajectory tracking controller for 3-DOF helicopter	5
LightYOLO: Lightweight model based on YOLOv8n for defect detection of ultrasonically welded wire terminations	5
Energy-efficient task offloading in fog computing for 5G cellular network	5
Passive thermal management of battery module using paraffin-filled tubes: An experimental investigation	5
Influence of Co content on microstructure and hardness of AlCoxCrFeNi (0 ≤ x ≤ 1) high-entropy alloys produced by self-propagating high-temperature synthesis	5
MFEUsLNet: Skin cancer detection and classification using integrated AI with multilevel feature extraction-based unsupervised learning	5
Extended-deep Q-network: A functional reinforcement learning-based energy management strategy for plug-in hybrid electric vehicles	5
Adaptive FEM-BPNN model for predicting underground cable temperature considering varied soil composition	5
Effectiveness of GFRP strengthening of normal and high strength fiber reinforced concrete after exposure to heating and cooling	5
Utilising waste material in a 3DCP mixture: A review on rheological and compressive strength	5
Optimal allocation of distributed generation on DC Networks	5
A review of artificial intelligence techniques for optimizing friction stir welding processes and predicting mechanical properties	5
An experimental study and sustainability assessment of plastic waste as a binding material for producing economical cement-less paver blocks	5
Deep learned BLSTM for online handwriting modeling simulating the Beta-Elliptic approach	5