Iranian Journal of Science and Technology-Transactions of Civil Engine

Papers
(The TQCC of Iranian Journal of Science and Technology-Transactions of Civil Engine is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Investigation of Vortex Formation in Water Intake Structures by Computational Fluid Dynamics68
Green Optimization Product Design of Suspended Fillers Based on Water Environmental Materials66
Behavior of Modified Asphalt Using Polystyrene Concrete in Static Creep: Experimental and Numerical Study35
Comprehensive Shear and Flexural Study: Experimental and FE Modeling of RC Haunched Beams Rehabilitated by Basalt Fabric33
Optimizing Grouting Techniques for Controlling Water Seepage, Using Rain Optimization Technique33
Analysis of the Seismic Risk of Low-Code Masonry and Large Panels Structures in Romania30
Numerical Study of Flow in Skewed Compound Channel Using k-ε Turbulence Model30
An Experimental and Numerical Investigation of Flow Characteristics Around Bridge Abutment29
Enhancing the Durability and Morphology Characteristic of Concrete Using Nano-Based GGBFS28
Experimental and Numerical Investigation on the Behaviour of Precast Concrete Sandwich Panels with Different Shear Connectors21
Evolution of Seepage and Stability Characteristics of Lateritic Soil Slopes Containing a Tension Crack Zone Under Rainfall Infiltration20
Experimental Study on Single- and Multi-stage Pump as Turbine on Water Supply Pipelines20
Water Allocation Based on Real-Time Simulation for Improving Soil Water Content19
Efficacy of Bacillus Cereus Bacteria in Improving Concrete Properties through Bio-precipitation19
Model Test Investigation of Soil Arching Development Above Reinforced Concrete Culvert Underneath Embankment17
Study on Seismic Behavior of Spliced Outer Sleeve Beam–Column Joints with U-Shaped Steel Plates17
Damage Detection in the Structures Using Incomplete Noisy FRF Data by Bayesian Estimation and Model Updating17
Evaluation of Darcy–Weisbach Friction Factors of Fiberglass Pipes Based on Internal Surface Roughness Measurement17
A Review of the Chemistry, Waste Utilization, Mix Design and Performance Evaluation of Geopolymer Concrete16
Effect of Coarse Recycled Aggregate and Rice Husk Ash on Concrete: A Factorial Design Approach16
Comparison of Existing Empirical Equations for Blast Peak Positive Overpressure from Spherical Free Air and Hemispherical Surface Bursts16
Axial Performance of Concrete-Filled Double Skin hybrid Tubular Columns: Role of Shear Connectors and Confinement Rings16
Prediction of Compressive Strength of Alccofine-Based Geopolymer Concrete16
Experimental Investigation on the Effect of Time on Transfer Length in Pre-stressed Concrete Beams16
Characterization of Denim Effluent Treatment Plant Sludge and its Influence on Concrete Hardened Properties16
Improvement of Mechanical and Microstructure Properties of Modified Fly Ash-Blended Low Carbon Cement with Hydroxy Propyl Methyl Cellulose Polymer15
Investigation of the Effects of Agricultural and Industrial Drainage on the Water Quality of Iran’s Largest Artificial Wetland15
Evaluation of Durability Characteristics on Hybrid Fibre Reinforced High-Performance Concrete Incorporated with Graphene Oxide15
Experimental Optimization of Low-Carbon Cellular Foam Geopolymers Incorporating Crushed Stone Sand and Flax Fiber Using Central Composite Design15
Experimental Study: Effects of Pier Position and Critical Velocity Ratio on Scour Pattern in Two Consecutive Bends Under Clear Water Condition14
Strengthening of Two-Way RC Flat Slabs for Punching Shear Using Steel Dowels and CFRP Sheet with EBROG and EBRIG Methods: An Experimental Study14
Investigation of Energy Loss, Number and Size of Air Bubbles Generated Due to Nappe Flow Impinging into Pooled Water by Varying the Physical Scale14
Seismic Response of Different Subsoil Tunnel Space Locations and Distinct Orientations of Infill Walls on Common Medium and High-Rise Reinforced Concrete Structures in Egypt14
A Systematic Review on Formwork Pressure Exerted by Self-Compacting Concrete: Parameters, Prediction Models, and Advances in Monitoring Technologies14
Structural Damage Identification Based on Extended Kalman Filter and Response Reconstruction14
The Performance Analysis of Robust Local Mean Mode Decomposition Method for Forecasting of Hydrological Time Series14
Production of Self-Compacting Concrete with Fly Ash Using Bagasse Ash as Fine Aggregate14
A Comprehensive Analysis of Feature Selection Techniques and Their Impact on Earthquake Damage Prediction14
Investigating Wheel–Rail Contact Behavior on Ballasted and Non-ballasted Tracks Using Finite Element Simulation14
Advancements in Geopolymer Concrete: A State-of-the-Art Analysis of Its Mechanical and Durability Features13
Effect of Discarded Geotextile Fiber on Mechanical Properties and Durability of Cement-Stabilized Diabase Waste Residue13
Numerical parametric study on structural performance and design of self-centering eccentrically braced frames with novel SC-PC-FD connections13
Static Behaviour of a Novel Prefabricated Textile Reinforced Concrete Crash Barrier13
Two-Dimensional Numerical Modeling of the Rubber Dams, Considering Extensible/Inextensible Linear Elements13
Microstructural and Durability Assessment of Various Concrete Types Under Different Chemical Environments12
Relative Performance of Limestone, Marble, and Basalt Powders in Replacement of a Recycled Fine Aggregate from Red Mud and Metakaolin-Based Geopolymer Mortar12
Performance of Reactive Powder Underwater Concrete: An Experimental and Statistical Investigation of Physico-Mechanical Characteristics12
Determination of the Factor of Safety against Sliding of Finite Slopes Using Classical Regression and Soft Computing Approaches12
The Swelling Characteristics of an Unsaturated Bio-cemented Sand-Bentonite Mixture: Analyzing the Effect of Bacterial Concentration and Suction12
Optimal Design Based on Surrogate Reliability Measures for Water Distribution Systems12
Experimental Investigation of Local Scour Protection Using Cuboid Pore Structures12
Analysis on the Effect of Heavy Metal-Polluted Soil on Potato Breeding12
Effects of Mineral Admixtures on the Alkali–Silica Reaction in Granite Manufactured Sand Mortar11
Investigation of Hydraulic Performance of Standard and Modified USBR Type III Stilling Basin Using Scale Modeling: A Case Study of Mohmand Dam Spillway, Pakistan11
BIM-based Clash Resolution Process Using Fuzzy AHP Methods11
Effect of the Hole with Pressurized Liquid on the Triaxial Compressive Properties of High-Performance Concrete11
Modeling of Caspian Sea Level Change and Feasibility of Sea Water Intake and Outfall Systems Considering Climate Change11
Short- and Medium-Term Forecasting of Allocated Water Volume in the ZIT EMBA Dam: Improving CNN with GWO and PSO Optimization11
Numerical Investigation of Cold-Rolled Aluminium Alloy Stub Columns with Perforations Undergoing Local Buckling11
Effect of Ferrochrome Slag Substitution on High Temperature Resistance and Setting Time of Alkali-Activated Slag Mortars11
Dynamic Response Mitigation of Adjacent Structures Using Negative Stiffness Amplifying Dampers Under Seismic and Cyclic Pulse Excitations11
Comprehensive Review of Techniques for Assessing Fire-Exposed Concrete: Principles, Applications, and Integration Strategies11
Sustainable Solutions: Exploring Supplementary Cementitious Materials in Construction11
Evaluating Punching Shear Strength in Basalt-Reinforced Slabs: An Experimental Analysis of Eccentric Loading and Reinforcement Ratios11
Effects of Graphene Materials on Asphalt and Asphalt Mixture11
Rayleigh Damping vs. Modal Damping Matrix Superposition for Steel Frames and Evaluation of Higher-Mode Contribution11
Comparison of Stacking, Boosting, Generalized Linear, and Neural Network Models for Estimating Scour Depth Around Spur-Dykes11
Monitoring of Corrosion Level in Nanocomposite Reinforced Concrete Specimens Using Zirconium Oxide Potential Sensor10
Using the Response Surface Method and Artificial Neural Network to Estimate the Compressive Strength of Environmentally Friendly Concretes Containing Fine Copper Slag Aggregates10
Framed Building Response to Tunnelling on Different types of Foundations10
Performance Evaluation of Machine Learning Regression Models for Rainfall Prediction10
Evaluation of Empirical SPT N-Vs Correlations Using 1D Site Response Analysis for Shallow Bedrock Sites in Islamabad, Pakistan10
A New Approach for Quantitative Definition of Asymmetrical Loading Tunnels10
The Effect of RHA and GBFS on the Mechanical and Physical Properties of Cementitious Composites with High Early Age Compressive and Flexural Strength: Bayesian Algorithm for the Design10
Development of a Machine Learning Algorithm for Efficient Localization of Damage in a Composite Structure Using Random Forest Technique10
The Effect of Different Natural Porous Aggregates on Thermal Characteristic Feature in Cementitious Lightweight Mortars for Sustainable Buildings10
Seismic Assessment of Impulsive and Convective Responses for A Base-Isolated Rectangular Liquid Tank with Eccentric Internal Submerged Block10
Efficiency and Safety of Traffic Networks Under the Effect of Autonomous Vehicles10
An Analytical Solution of Chloride Transfer into RC Pipe Pile by Convection–Diffusion Effect Considering Time-Dependent Surface Chloride Concentration9
Punched Metal Straps as Replacements for Main Steel Rebars in Normal Concrete Beams9
Assessment of Flexural Behavior and Numerical Simulation of UHPFRC Beams with Steel Fibers9
Mining Method of Microbial Community Characteristics in Hangzhou Xixi Wetland9
Assessing Scaling Behavior of Four Hydrological Variables Using Combined Fractal and Statistical Methods in Missouri River Basin9
Modification of Expansive Clay Behavior by Using of the Filtration Effluent of the Water Treatment Plant9
Experimental and Numerical Investigation on the Behavior of Eccentrically Loaded Hybrid Steel and GFRP RC Columns9
Parametric Study on the Performance of Disconnected Piled Raft System on Soft Soil Under Vertical Load9
Experimental Investigation of Local Scour Around Inclined Bridge Piers on Clay-Sand Mixed Cohesive Sediment Bed in Clear-Water Conditions9
Output-Only Method for Defect Identification in the Internal Edge of the Plates with a Circular Hole Using Guided Ultrasonic Waves and Discrete Wavelet Transform9
Determination of Environmental Flow in the Dez River using Modern Optimization Methods to Release Flow from the Dez Dam9
Performance Assessment of DEM Vertical Sensitivity on Two-Dimensional Hydrodynamic Simulation in an Alluvial Tributary Floodplain of the Brahmaputra Lower Basin in India9
A Computationally Efficient Framework for Inelastic Multi-objective Performance-Based Seismic Design Using Surrogate Linear Dynamic Models9
An Empirical Study on the Evaluation of the Implementation Effect of the Rural Revitalization Strategy in Chongqing Municipality, China8
Mechanically Activated Red Mud Based Geopolymer for Advanced Concrete Applications: Synthesis and Properties8
Experimental Study on CRTS III Ballastless Track Based on Quasi-distributed Fiber Bragg Grating Monitoring8
Changing Pattern of Drought Proneness Across Iran8
Mechanisms for Recycling E-Glass Waste to Enhance The Fracture Energy of 3d Printed Structural Dune Sand Mortar8
Self-Compacting Concrete Using Supplementary Cementitious Materials and Fibers: Review8
Research on Initial Force Determination and Mechanical Behaviors of Crossed Spoke Cable-Truss Structure8
A Shear Deformable Finite Element Formulation for the Elastic Lateral Torsional Buckling Analyses of Steel Beams8
An Estimation Proposal for Engineering Properties of Modified Concrete by using Standalone and Hybrid GRELM8
Optimizing Coated PZT Sensors for Structural Health Monitoring in Hybrid Fibre-Reinforced Concrete Beams8
Study on the Influence of Corrosion and Cracking in the Phosphate-Based Geopolymer Concrete Incorporated with Copper Slag8
Application of Data Augmentation Techniques in Predicting Travel Time Reliability: Evidence from England8
Appropriate Intersection Design Type Based on TOPSIS Multiple Criteria Decision Method with AIMSUN Mesoscopic Simulation8
Enhancing Concrete Performance and Sustainability with Nano TiO₂: Engineering, Microstructural, and Life Cycle Evaluation8
Seismic Response Analysis of a Specific Pagoda in China8
Tunnel BIM Model Integration Construction Method and Engineering Application8
Effect of Crumb Rubber on Concrete’s and Mortar’s Structural Properties: A Review8
Performance of Recycled Aggregate Concrete Incorporating Copper Slag at Elevated Temperature8
Behaviour and Strength Prediction of Reinforced Recycled Aggregate Concrete Columns Confined with CFRP Wraps8
Enhancing System Response with a Novel Nonlinear Displacement–Velocity-Dependent Damper Considering Momentum Variation7
Behavior and Design of Reinforced CFST Columns with Bolted Shear Connectors Under Eccentric Compression7
Packing Density-Based Rheological Analysis of Self-consolidating Concrete Containing Mineral and Chemical Admixtures7
Innovative Strategies for Enhanced Concrete Durability: A Comparative Analysis of Autogenous and Autonomous Self-healing Mechanisms7
A New Spectral Risk-Based Approach for Estimating Probable Maximum Precipitation7
Analytical and Numerical Investigation of the Cyclic Behavior of O-Shaped Dampers7
Tunnel Modeling of Dust Concentrations that Affect the Environment of Ahvaz City in Iran7
Experimental Investigation of the Boundary Effects for Flexible Piping Systems from Small to Large Scales7
Effect of Buttress Form on Transverse Seismic Resistance of Masonry Buildings7
Study on Antiknock Performance of Reinforced Concrete Slabs Using Piezoceramic Transducers7
Investigation on Chloride-Induced Corrosion Reduction Strategies for Offshore Reinforced Concrete Structures7
Effect of Brick and Ceramic Powders on Fresh and Hardened Properties of Rubberized Concrete7
An Object-Oriented Computer Program for Structural Reliability Analysis (BI): Components and Methods7
Uncertainty Assessment of Ensemble Base Machine Learning Modeling for Multi-step Ahead Forecasting of Dam Reservoir Inflows7
Seismic Vulnerability Curves for Non-reinforced Asymmetric Masonry Buildings Retrofitted with External Shotcrete: A Case Study on Control and Switchgear Room of Power Substations7
Effect of Inclusion of Recycled Waste Glass Powder in Geopolymer Concrete: A Review on Workability, Mechanical, Durability, and Micro-Structural Performance7
Water–Cement Ratio on High-Cycle Fatigue in the Theory of Critical Distances of Plain Concrete7
An Experimental Study of the Effect of Soil Particles and Pore Orientation Angles on Permeability7
The Effects of Nano-silica Addition on the Physical Properties of Polyethylene-Modified Asphalt Binder and the Mechanical Properties and Durability of Asphalt Mixtures7
Comparison Between the Efficiencies of Reverse Osmosis Membrane and Carboxyl Multi-Walled Carbon Nanotubes in Copper Ions (Cu2+) Removal from Synthesized Wastewater7
Resistance of Lightweight Polymer Concrete in Aggressive Environment7
Nonlinear Behaviors of Ultra-High-Performance Concrete-Filled Steel Tubular Beam-Column Under Monotonic and Cyclic Loading7
Analytical Evaluation of Natural Frequencies in Hollow-Core Slabs: A Practical Methodology for Civil Engineering Applications6
Scour Depth Mysteries: Unraveling the Effects of Cylindrical Stepped Weirs6
Moisture Harvesting Efficacy Utilizing Flower-Like ZnO Nanostructures Coated on Cotton Fabrics6
GPR Forward Modelling and Imaging Analysis for Boulder Detection6
Enhancing Compressive Strength of Very High Volume Fly Ash Concrete Using Low Molarity Alkali Solution and Thermal Activation6
Tuned African Vultures Optimization Algorithm for Optimal Design of Skeletal Structures Employing Multi-Stage Parameter Adjustment6
Concrete Damage Plastic Model for High Strength-Concrete: Applications in Reinforced Concrete Slab and CFT Columns6
Composite Failure Analysis of Municipal Solid Waste Landfill Cell Stability6
Advancements in Flow Behavior Investigation and Performance Enhancement of Morning Glory Spillways: A Systematic Review of Numerical and Physical Models6
A Hybrid Algorithm for Acceleration Harmonic Estimation and Elimination in Shake Table6
The Seismic Anisotropy of the Eastern Anatolia6
Extreme Learning Machine for Estimation of the Engineering Properties of Self-Compacting Mortar with High-Volume Mineral Admixtures6
Ultra-High Performance Hybrid Polyvinyl Alcohol-Polypropylene Fiber-Reinforced Cementitious Composites with Augmented Toughness and Strain-Hardening Behavior6
Developing a Regression Model for Predicting the Displacement of Reinforced Concrete Beams Using GFRP Rebar and Joints6
Flexural Response of Concrete Encased Cold-Formed Steel Lipped Built-Up Channel Beams6
Comparative Life Cycle Assessment of Concrete with Natural and Recycled Aggregates in the Perungudi Region6
The Mechanical and Fracture Characteristics of Low Fiber Content Slurry-Infiltrated Fiber Concrete6
Empirical Evaluation of RMR, GSI, and Q for Underground Excavations6
Integrating FR, MFR and IV Models for Landslide Susceptibility Zonation Mapping in Joshimath Watershed, Uttarakhand, India6
Analysis on Vibration Screening by Rayleigh Wave Propagation Through Open and In-filled Trench6
Correction to: Experimental Study of Natural Bed Roughness Effect on Hydraulic Condition and Energy Dissipation Over Chutes6
Estimating Geotechnical Properties of Sedimentary Rocks Based on Physical Parameters and Ultrasonic P-Wave Velocity Using Statistical Methods and Soft Computing Approaches6
A Numerical Investigation of the Impact of Non-linear Viscous Damping on Structural Response to Seismic Excitation6
Correction: Approximation of Oxygen Transfer Efciency of Solid Jet Aerator Having Circular Opening with Kernel Function-Based Models and Random Forest Models6
Bending and Buckling Analysis of Porous 2D Functionally Graded Beams with Exponential Material Property Variation6
Preparation and mechanical properties of novel epoxy mortar incorporating hybrid toughening constituents6
A Study of Progressive Collapse in Moment-Resisting Reinforced Concrete Structures Considering Damping Ratio6
The Effect of the Central Angle and Height of Arced Piano Key Weir on the Discharge Coefficient6
Displacement-Based Methodology for Seismic Analysis of a Retrofitted Substandard Low-Rise RC Building Using Conditional Mean Spectra6
A Comparative Assessment of Chemical Properties, Toxicity and Mechanical Performance of Industrial Waste Materials as Fine Aggregate for Eco-friendly Paving Application6
Performance of a Deep Excavation Reinforced by Soil-Nailing During an Earthquake Excitation6
Rheology Properties of Underwater Cement Paste with Nonionic Polyacrylamide6
A Two-Stage Damage Localization and Quantification Method in Trusses Using Optimization Methods and Artificial Neural Network by Modal Features6
Stress–Strain Behavior of the Structured Marine Clay in the True Triaxial Stress Condition6
Seismic Assessment of Vertical Geometric Irregular Building: A Revisit6
Field Plate Loading Test Investigation on the Foundation of an Oil Drilling Platform Reinforced with Geocell in Desert Area6
The Role of Size in the Axial Strength Behavior of Square Concrete Columns Confined with Carbon Fiber Reinforced Polymer6
Numerical Investigation of Seismically Excited Partially Filled Chamfered Bottom Tanks6
Effects of Freeze–Thaw Cycle on Permeability and Compression Properties of Aeolian Soil–Bentonite Mixture6
A Newly Generated Seismic Ground Response Analysis Software Package -SeisGRASP- by International Institute of Earthquake Engineering and Seismology6
Optimization of Construction Program Schedule Plans Based on Multi-Objective Optimization Theory5
Experimental Study on Dynamic Characterization of Guar Gum-Treated Fly Ash5
Development of a Framework for Optimal Selection of Sustainable Building Envelope using BIM5
Three-Dimensional Numerical Analysis of Embankment Overlying Geotextile-Encased Columns with Granular Platform5
Calibration of Load and Resistance Factor Rating for Short to Medium-Span Lengths Bridges in Pakistan5
A Novel Embeddable TiO2 Potential Sensor for Corrosion Monitoring in Concrete Structures5
Development of Sustainable Engineered Cementitious Composites Using Limestone Calcined Clay Cement (LC3): A Review5
Advancements in Geopolymer Concrete for Marine Infrastructure: An Optimization of Performance Considering Workability, Compressive Strength, Capillary Water Absorption, Porosity, and Chloride Migratio5
Effect of Sodium Hydroxide Additive on Mechanical Properties and Durability of Self-Compacting Concrete with Sulfate Aggregates in Chloride Environment5
Seismic Response of Retrofitted Welded-Flange-Plate Moment Connections to Built-Up Battened Columns: A Parametric Study5
Research on Structural Defect Characteristics and Influencing Factors for High-Fill Cut-and-Cover Tunnels in Mountainous Areas5
Seismic Response Probabilistic Evaluation of Bridge Pier After Vehicle Collision5
A Novel Damage Sensitive Feature Extraction Method of the Concrete Dam5
Optimization of Concrete Slab Floor Thickness of Stilling Basins According to Pressure Fluctuations5
Addition of Synthetic Steel Fibers for Enhancing the Mechanical Behavior of Fly Ash-Based Geopolymer Composites5
A Novel Hybrid Algorithms for Groundwater Level Prediction5
Unsignalized Intersection Capacity Estimation Through Traffic Rule Re-adjustments Using Agent-Based Cellular Automata Simulations5
Improvement of the Hydraulic Performance of Vertical Slot Fishway Type VI Using Unsubmerged Plates5
Prediction of Traffic Flow Based on Calendar Data on Suburban Roads (Case Study: Chalus Road)5
Probabilistic Analysis of the Undrained Bearing Capacity of Strip Footings on Voids with Random Distribution of Size and Location5
Effects of Soil–Structure Interaction on Seismic Fragility of Railway Concrete Bridge, in India5
One-Dimensional Compression Response of Sands Amended with Fly Ash Related to Particle Morphology Effects5
Factors Affecting the Setting Times of Pumice Based Alkali-Activated Hybrid Cements5
Seismic Behavior of Steel Frames Surrounded by Basement Shear Walls Using Spectral Equations Solution5
Experimental Investigation of Multiple Supercritical Flow States and the Effect of Hysteresis on the Relative Residual Energy in Sudden and Gradual Contractions5
Durability and Hardened Characteristics with SEM Analysis of Eco-Efficient Self-Compacting Concrete Partially Contained Waste Walnut Shell Particles as Fine Aggregate5
An Experimental Investigation on the Mechanical Behavior of Dalian Red Clay upon Saline Intrusion5
A Dynamic Threshold Convergence Algorithm for Hybrid Fiber-Concrete Optimization Using Modified Taguchi and Grey Relational Methods5
Structural Performance of Masonry Buildings Under Harsh Climate and Seismic Loads5
Compressive Strength Estimation of Rice Husk Ash-Blended Concrete Using Deep Neural Network Regression with an Asymmetric Loss Function5
Assessment of Mechanical and Impact Resistance Properties of Rubberized Concrete After Surface Modification of Rubber Crumb5
Influence of Corrective and Additive Raw Materials on Clinker Composition and Cement Properties: A Case Study from Yemen5
Basalt Fiber Sheet Retrofit for Shear Strengthening of RC Beams5
A Comprehensive Experimental Investigation of Fly-Based Geopolymer Concrete Made with Recycled Concrete Aggregates5
Did the Pandemic Defeat Us in the Fight for Public Transportation with Respect to Dynamic Effect of Crowding?5
Dynamic Response of Inter-story Isolated High-rise Building Subjected to Wind Flow5
A Hybrid Machine Learning Approach for Predicting Joint Shear Capacity in Beam-Column Connections5
Multiple Evaluation Indexes-Based Serviceability Analysis for Subway-Induced Vibration on the Building5
Evaluation of the Usability of the Rainfall Anomaly Index (RAI) Instead of the Standard Precipitation Index (SPI)5
Internal Curing for Tunnel Self-Compacting Concrete Using Pre-Soaked Coal Gangue: A Promising Way for Spot Utilization of Coal Gangue5
Salt tracer experiment through an embankment dam5
Embankment Dams Overtopping Breach: A Numerical Investigation of Hydraulic Results5
An Experimental Investigation on One-Way Slabs Reinforced Using FRC and EBR Techniques Under Impact Loading5
Seismic Performance Evaluation of Two- and Three-Story Steel Frames with an Upgraded Hybrid Buckling-Restrained Brace5
Acceptance of the Newly Implanted E-Ticketing System in Dhaka City’s Bus Service5
An Efficient K-Factor Formula for Stability Evaluation of Steel Frames with Web-Tapered Members4
Air–Water Flow Characteristics in a B-Jump on a Sloping Surface with Pre-Aerated Inflow Conditions4
Valorization of Industrial and Agro By-products into a Biobased Sustainable Controlled Low Strength Material4
Modeling Construction Freight Using OLS, Robust Inference and FGLS4
Residual Performance of CFT Column After Exposure to Elevated Temperatures: A Comparative Analysis Based on Design Parameters4
Experimental Analysis on Static Liquefaction Susceptibility of Saturated Silty Sand Based on Strain Energy Absorption Evaluation4
Correction to: Analytical and Numerical Solutions to Level Pool Routing Equations for Simplified Shapes of Inflow Hydrographs4
Workability Tests and Rheological Properties of Manufactured Sand4
Sustainable Geopolymer Brick Composites from Municipal Incinerated Ash: Microstructural, Mechanical, and Durability Optimization4
Experimental Investigation of Repair and Strengthening Methods on the Flexural Behavior of Damaged Reinforced Concrete Beams4
Performance Evaluation of Eccentrically Braced Frames by Strength Based and Performance Based Plastic Design Methods Considering Turkey’s Ground Motions4
Determination of Isotope Ratio of Plumbum Pollution Source in Birmingham Urban Soils4
Macro- and Microscale Properties of Vibration Mixing Cement-Stabilized Macadam: Laboratory and Field Investigation4
Experimental and Numerical Investigation of the Seismic Performance of RC Moment-Resisting Frames with Additive Materials Having Porosity in Connections4
Microstructural Characterization and Multi-Objective Optimization of Concrete Containing Recycled Gravel and Crystallized Slag: A Box-Behnken Design Methodology4
Bio-Stimulation of Indigenous Bacteria for Bio-Cementation of Salty Soil4
A Novel Application of Waste Polythene in Concrete4
Monitoring Terrestrial Water Storage Using GRACE/GRACE-FO Data over India: A Review4
Multi-Temporal-Scale Analysis of the Underlying Association Between Temperature and River Flow Using a Cross-correlation and Nonlinear Dynamic Approach4
Optimising Compressive Strength: Investigating the Ideal Conditions for Sodium Silicate-Activated Fly Ash–GGBS-Based Binder4
Behavior of Hybrid FRP Strengthened RC Column Under Axial Compression4
Double Assessment of Dam Sites for Sustainable Hydrological Management Using GIS-Fuzzy Logic and ANFIS: Halabja Water Supply Project Case Study4
Static Uplifting Analysis of Unanchored Ground-Based Cylindrical Steel Tanks4
Investigation of Pollution by Toxic Metals in the Bed Sediments of Ganga River Along Kanpur to Prayagraj City of Uttar Pradesh, India4
Experimental Study of the Effects of Trapezoidal Permeable Obstacles on Density Current Head Flux4
A Data-Driven Method Based on Bidirectional Convolutional Current Neural Network to Detect Structural Damage4
Effects of Span on Local Scour Depth around Four Columns of Tandem Piers in Clear Water4
Post-earthquake Performance Level Investigation of ACI-Based Designed Simplified Reinforced Concrete Structures4
Development of Soft Computing Models Based on Wavelet Analysis for Estimating Piezometric Heads in Earth Dams4
A Simplified Mix Design for GGBS–Dolomite Geopolymer Concrete Using the Taguchi Method4
Laboratory Study of the Combined Use of Reactive/Nonreactive Polymer and Polyphosphoric Acid in Asphalt Mixtures4
Damage Detection in Members and Connections of Plane Frame with Flexible Connections Using Residual Force Method and Whale Optimization Algorithm4
Advancements in Geopolymer Concrete: A Detailed Review of Engineering Properties with Nanomaterial Integration4
0.14705896377563