Sustainable Chemistry and Pharmacy

Article	Citations
Innovative self-compacting repair mortar: Utilizing municipal solid waste incinerator bottom ash, propylene fiber, and wash water	129
Women's satisfaction with their childbirth experiences and hospitals' corporate social responsibility intentions	115
Assessment of two-stage anaerobic digestion of blackwater and kitchen waste for reducing environmental impact of residential buildings	109
Ultrasonic-assisted macroporous resin and membrane processes for the systematic separation of Ganoderma lucidum wastewater	87
Corrigendum to “Multi-drug extraction using octanol supported rotating cellulose paper disc (RPD) device from complex biological matrices: Fabrication and application in forensic case work” [Sustain.	75
The effect of ultrasound on improving the extraction of tannins from the Stryphnodendron adstringens bark	65
Evaluation of analytical efficiency, sustainability and applicability of microextraction based analytical methods for drugs of abuse using a white analytical chemistry approach	63
Phosphorus removal mechanism from liquid phase using digestate-derived biochar	59
To salt or not to salt: Optimized production and sequential downstream processing of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and bacterioruberin from Haloferax mediterranei	59
Simultaneous dyeing and wastewater treatment in one bath by constructing cationic polyelectrolyte self-assembled coating onto cellulosic fabrics	57
Operationally simple, scalable synthesis of aryloxy propanolamines using glycerol as a green promoting media: Practical eco-friendly access to propranolol and atenolol	56
Circular bioeconomy approach for the recovery of polyphenols and dietary fibres from orange pomace waste	55
A sustainable approach to fertilizer management: Microwave-assisted synthesis of slow-release ammonium-natural clinoptilolite	54
Sustainable one-pot production of lignin-based bioactive quinazolinone derivatives	48
Plant extract FRAP effect on cation vacancies formation in greenly synthesized wüstite (FeO) nanoparticles: A new contribution	48
Biorefinery development for the production of polyphenols, algal biomass and lipids using olive processing industry waste	48
Are newer pharmaceuticals more recalcitrant to removal in wastewater treatment?	48
Synthesis, characterization, and bioactivity evaluation of PES-Ni-SiO2 nanocomposite membranes cum stabilization of Ag NPs for nitrophenols hydrogenation and dyes discoloration studies	47
Preparation of amylopectin and chitosan based polyurethanes for sustained drug release studies	45
Green extraction strategies to obtain bioactive compounds from ‘Charelo’ vine shoots	41
Recycling spent mushroom substrate as a partial fine aggregate substitute in cement brick Production: Evaluating mechanical, durability, and thermal insulation properties	41
Style decolorization treatment of denim fabric: Decomposition of indigo dyes via horseradish peroxidase/H2O2 system at room temperature	41
Facile preparation of Pd/BN nanocatalyst for Suzuki reaction: Synergistic boron nitride effect in a green solvent system	41
Green and efficient extraction of polyphenols from the leaves of Quercus dentata Thunb and in vitro antioxidant activities of polyphenol extract	40
Unveiling the physical chemistry behind sustainable silk dyeing using an acetylshikonin based extract from lichen Parmotrema perlatum: Adsorption kinetics, thermodynamic modelling and docking studies	40

Environmentally benign, ultrasonication assisted, sustainable valorization for commercially important nutraceutical-Daucosterol from the heartwood of invasive Prosopis juliflora (Sw.) DC	40
Comparison of three extraction methods for anthocyanins from perilla frutescens leaves	38
Preparation of modified rice straw-based bio-adsorbents for the improved removal of heavy metals from wastewater	38
Utilization of marine organisms for the green synthesis of silver and gold nanoparticles and their applications: A review	37
A new eco-friendly electrochemical sensing platform for monitoring of agomelatine in different matrices with sub-nanomolar detection limits	37
In-situ chemobiocatalytic conversion of glucose into 2,5-bis(hydroxymethyl)furan by AlCl3/Enterobacter cloacae in biocompatible DMSO-water solvent	36
Recovery of phosphates from anaerobic MBR effluent using columns of eggshell and seagrass residues and their final use as a fertilizer	36
Synthesis and modification of carbohydrates using metallaphotoredox catalysis and photoexcited-state transition metal catalysis	36
Spent coffee waste: A sustainable source of cleansing agent for a high-performance makeup remover	35
Research progress on solidification/stabilization of sludge with Alkali‒Activated cementitious materials: A review	35
Development of pH-sensitive films based on buckwheat starch, critic acid and rose petal extract for active food packaging	35
Guar gum based flexible packaging material with an active surface reinforced by litchi shell derived micro fibrillated cellulose and halloysite nanotubes	34
Robust analytical method for the enantiomeric separation of lurasidone hydrochloride: Integrating analytical quality by design and green chemistry principles	34
Furfural-based phenolic resins for plywood panels: From basic concepts to upscale production	33
An integrated paradigm between green analytical chemistry and quality-by-design for robust analysis of alcaftadine and ketorolac tromethamine in aqueous humor via sustainable chromatographic methods	32
Optimization of ultrasounds assisted extraction of polysaccharides from cladodes of Opuntia ficus-indica using response surface methodology	32
Sustainable hexavalent chromium removal from aqueous solutions using novel plant-based biocoagulants: Comparative performance, mechanism elucidation, and economic evaluation	31
Improvement of barrier properties for packaging applications	31
Eco-friendly innovations in food packaging: A sustainable revolution	31
Impressive spectrofluorimetric framework for determination of newly approved anti-coagulant betrixaban using silver-nanoparticles; with assessment of blueness, whiteness and greenness.	30
Enhancing pro-environmental behaviour of employees towards renovation waste for a circular economy: The role of external supervision and corporate environmental responsibility	30
Pyrolysis of Quercus cerris kernels for the production of bio-oil and activated biochar for methylene blue adsorption from aqueous phase	30
Waste marble powder emerges as a promising material choice to enhance the properties of alkali-activated slag cement	30
Cyclodextrin based artificial enzymes	30
FAME properties, bio-oil productivity and carbon yield coefficient of Chlorella sorokiniana grown with low and high initial nitrogen concentrations	30
Insights into bioprocessed xylitol crystallization: Physico-chemical and techno-economic perspectives	30
Closing the loop: Analysis of biotechnological processes for sustainable valorisation of textile waste from the fast fashion industry	30
Exploring the potential of chemical recycling of waste medium-density fiberboards (MDF) under oxidative and pyrolytic conditions	29
Influence of aluminum waste, hydrogen peroxide, and silica fume ratios on the mechanical and thermal characteristics of alkali-activated sustainable raw perlite based geopolymer paste	29
In-situ photocatalytic degradation of low-density polyethylene: A pathway towards eco-sustainability and circular economy	29
Propylene carbonate as an ecofriendly solvent: Stability studies of Ripretinib in RPHPLC and sustainable evaluation using advanced tools	29
Recycling bio-waste into durable green mortars: Effects of eggshell powder on strength, microstructure, and durability	29
Chemical profiling and biological activities of “green” extracts of willow species (Salix L., Salicaceae): Experimental and chemometric approaches	28
A green approach for genistein and apigenin extraction optimization from by-products of soybean crops	28
Ultrasound-assisted leaching and supported liquid membrane extraction of waste liquid crystal displays for indium recovery	28
Sustainable strength improvement of clay soil via steel slag and hydrothermal solidification: A geochemical approach using the role of chemical compositions, Ruxton Ratio, and cementation index	28
Pyrolysis of Syagrus coronata: Transforming agroindustrial waste into a new environmentally sustainable corrosion inhibitor	28
Phytochemical characterization and cytotoxic potential of extracts from roots and inflorescences of Cannabis sativa L. cv. Eletta Campana	28
Kinetics and thermodynamic insights on extractive fermentation of fibrinolytic protease by Burkholderia cenocepacia strain OK1899609.1 using glycol-based eutectic solvents	28
γCDCoBr2 complexes as catalysts in sulfide oxidation and its reused	28
Essential oil extraction and evaluation from the fresh Platycladus orientalis (L.) Franco seed peel waste by an environment-friendly method	28
Exploring okra-based biopolymer as a green binder for stabilizing clayey soil	28
Determination of pKa values of some proton pump inhibitors in water-organic solvent mixtures: Conventional and green RPLC methods	27
Sustainable pine cone adsorbent: Removal of prednisolone and pre-treatment of a medical lab wastewater	27
Cinnamon essential oil incorporated chitosan submicron emulsion as a sustainable alternative for extension of mango shelf life	26
Catalyst in algal refinery: A way towards production of high-quality biofuel	26
Interaction between chitosan and natamycin maintain freshness quality and enzymatic activity of post-harvest Prunus salicina Lindl. cv. ‘Shazikongxinli’ fruit	26
Optimization of vortex-assisted magnetic nanofluid based liquid phase microextraction for fast, green and reliable extraction of ibuprofen from real samples: Multivariate approach	26
Synergistic defect and doping engineering of novel green phosphorene for enhanced spatial carrier separation: A DFT-based strategy for high-efficiency overall water splitting	26
Natural acidic deep eutectic solvent-mediated microwave-assisted simultaneous hydrodistillation, hydrolysis, and extraction for obtaining essential oils, gallic acid and ellagic acid from Liquidambar	26

Comparative analysis of kinetic model-fitting methods and selection priority for horse manure pyrolysis	25
Development of low-carbon cementitious materials utilizing electrolytic manganese residue and industrial solid wastes: Environmental performance and strength mechanisms	25
A short-term durability comprehensive study of ceramic waste-doped White Cement composites with hooked-end, basalt and copper-coated fibers	25
Ecotoxicity assessment of hydrochar from hydrothermal carbonization of biomass waste	25
Unravelling the stability of solvated silicate species in sodium silicate activator solution of different silica modulus by FTIR and NMR studies and their chemical reactivity on metakaolin and fly ash	25
Recent advances in myo-inositol recovery and purification from agricultural sources as potential dietary supplements: A review	25
Green and facile short path smartphone-based assay for L-proline in dietary supplements using a mild chromogenic reaction combined with simple equipment	25
Zeolite-catalyzed synthesis of quinazolin-4(3H)-ones through selective cleavage of C–C bond of 1,3-diketones under solvent-free conditions	25
Hydro metallurgical technique as better option for the recovery of rare earths from mine tailings and industrial wastes	25
Biodiesel produced from waste cooking oil by microwave transesterification using inert aluminium foil (1%) as a heating promoter	25
A versatile approach to α-fluoroketones from diversely substituted olefins: Step towards greener fluoropharmaceuticals	25
RETRACTED: Green and rapid and instrumental one-pot method for the synthesis of imidazolines having potential anti-SARS-CoV-2 main protease activity	25
Thermal decomposition behavior and kinetics for pyrolysis and catalytic pyrolysis of sugarcane bagasse	24
Innovative approach to enhancing phosphogypsum mechanical properties and stabilizing/solidifying contaminants	24
Design of low-cost recyclable adsorbent based on cellulosic bags filled with carbon black derived from carrot peels for water remediation	24
Almond waste extract as an efficient organic compound for corrosion inhibition of carbon steel (C38) in HCl solution	24
Wheat straw fibre based semi-IPN composite: Preparation and evaluation as a matrix for water and fertilizer release and in slope reinforcement	24
Elucidating sorptive eradication of ibuprofen using calcium chloride caged bentonite clay and acid activated alginate beads in a fixed bed upward flow column reactor	24
Roth's switch-on fluoremetric probe for green tracking and quantifying of 1.4-dihydropyridine medication: Evaluation of greenness, whiteness, and blueness	24
Green pretreatment of lignocellulosic biomasses via deep eutectic solvents	24
Roundup (glyphosate): Products of photochemical decomposition and their toxicity and genotoxicity	24
Exploring corrosion protection with greener synthesized metal phosphonates	23
Efficient conversion of CO2 into quinazoline-2,4(1H,3H)-diones by glutarimide-based ionic liquids: Relationship among catalytic activity, CO2 absorption capacity, and the interaction force of cations	23
Catalyzing sustainability through prefabrication: Integrating BIM-LCA for assessing embodied carbon in timber formwork waste	23
Experimental data-driven and phenomenological modeling approaches targeting the enhancement of CaTiO3 photocatalytic efficiency	23
Coordination engineering of transition metal doped in B2CN3 electrocatalyst to enhance efficient carbon dioxide reduction reaction	23
A step towards sustainable and effective hand sanitizer formulations based on bacterial cellulose nanofibers	23
Integration of sustainable chemistry frameworks with a single-pot, on-off fluorescence approach for enabling the facile quantification of mosapride; Application to pharmaceutical tablets and content u	23
Using superabsorbent polymer to mitigate the fast setting and high autogenous shrinkage of carbide slag and sodium silicate activated ultrafine GGBS based composites	22
Sulfate attack, freeze-thaw and high-temperature performances by evaluation of colemanite waste as binding material and aggregate in green geopolymer production	22
Method for preparing high-purity struvite by extracting nitrogen and phosphorus from sewage sludge using a coupled process of hydrothermal carbonization and oxalic acid leaching	22
The application of the full factorial design and Response Surface Methodology in optimization conditions for essential oils extraction from Lavandula stoechas, Carum carvi and Eucalyptus camaldulensis	22
A green flow-batch liquid phase microextraction lab-in-syringe platform based on natural deep eutectic solvents for toxic metal determination	22
Functional profiling of dried Citrus sinensis and Citrus limetta peels: A multivariate and spectroscopic insight into waste valorization	22
Low-carbon cement development via synergistic use of lead–zinc smelting slag and magnesium-rich lime mud	22
In support of circular economy to evaluate the effects of policies of construction and demolition waste management in three key cities in Yangtze River Delta	22
A novel and eco-friendly UPLC-ESI-MS method for the quantification of Aceclofenac-NDSRI (Nitroso Drug Substance Related Impurity) from Aceclofenac drug substance and combination formulations	22
Influence of hydroxypropyl-β-cyclodextrin complexation on the extraction efficiency of rutin, quercetin and total polyphenols from Fagopyrum esculentum Moench	22
Hydrothermal conversion of Cu-laden biomass to one-step doped hydrochar used as a potential adsorbent for 2-nitrophenol removal	22
Synthesis and photoinitiated cationic polymerization of epoxidized phenylpropanoid and α-pinene derivatives	22
Utilization of red clay brick waste in the green preparation of an efficient porous nanocomposite for phenol adsorption: Characterization, experiments and statistical physics treatment	22
Activated carbon from hydrothermal carbonization of ice cream factory wastewater with H3PO4 activation. Synthesis, characterisation and adsorption properties	21
Sustainable one-part alkali activated slag/fly ash Geo-SIFCOM containing recycled sands: Mechanical, flexural, durability and microstructural properties	21
Role of micellar nanoreactors in organic chemistry: Green and synthetic surfactant review	21
Economic pre-feasibility of supercritical fluid extraction of antioxidants from fruit residues	21
Biodiesel production using heterogeneous catalyst derived from natural calcite stone: Study of the effect of Mg–Zr doping and reaction conditions	21
Poly(hydroxamic acid) ligand from cornstalk cellulose for heavy metal recovery from electroplating wastewater	21
Greener and sustainable fabrication of DNA/RNA base-pair conjugates by [CuO[HN(C2H5)3[Al2Cl7] nanocatalyst: Emerging drug against prostate cancer	21
Formation and characterization of charge transfer complex between alectinib and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone: Application to development of microwell spectrophotometric method	21
Solid-liquid extraction of polyphenols from chestnut shells: A sustainable approach for coagulant synthesis	21
Multi-drug extraction using octanol supported rotating cellulose paper disc (RPD) device from complex biological matrices: Fabrication and application in forensic case work	21
Green fluorescence-based approaches for quantitative estimation of the antihistaminic drug meclizine; application to spiked human plasma	21
Murraya koenigii extract blended nanocellulose-polyethylene glycol thin films for the sustainable synthesis of antibacterial food packaging	20
Treatment of two-phase olive mill waste and degradation of phenolic compounds with simultaneous bio-electrochemical conversion of CO2 to CH4 using a microbial electrolysis cell	20
Bioconversion of vine shoots into renewable products using ohmic heating extraction and autohydrolysis	20
Comparison of the effects of green and sustainable extraction methods on the extraction yield and chemical composition of Ruta chalepensis roots	20
Green electrochemical sensor based on ZnO@α-Fe2O3 NPs modified carbon paste electrode for sensitive voltammetric determination of the FDA-approved Anti-COVID-19 medication baricitinib	20
Exploring the production of antioxidants and biogas from avocado (Persea Americana var. Americana) residues as an alternative for developing rural bioeconomies	20
Multicomponent antihypertensive pharmaceuticals determination with related impurity analysis using MEKC: Whiteness and greenness assessment	20
Dunite powder as a green precursor in one-part alkali-activated composites: Effects on mechanical and durability properties	20
Eco-hydrogels: The new frontier of sustainability: A review	20
Experimental research on citric acid modified magnesium oxysulfate cement composites under dry-wet cycles: Mechanical properties and microscopic mechanism	20
Cu-catalyzed, ligand free syntheses of arylaminopyrimidines in aqueous solution and in silico investigation of their druglikeliness properties	20
Optimization of obtaining extracts with photoprotective and antioxidant potential from Campomanesia adamantium (Cambess.) O. Berg	19
Sustainable alternative for removing pesticides in water: Nanomodified activated carbon produced from yeast residue biomass	19
Environmentally sustainable production of biodiesel from waste edible oil using Mn–Fe supported magnetic acid heterogeneous catalyst: Optimization via Taguchi L9 technique	19
Black cumin essential oil as a valuable source of bioactive compounds: Evaluation of the conventional vs. modern extraction technique	19
Exploitation of waste perlite products in lime-based mortars and grouts	19
An eco-friendly kapok fiber-supported liquid microextraction using natural deep eutectic solvent as extractant for convenient biological samples preparations: A proof-of-concept study	19
Utilizing non-thermal plasma to introduce chlorine-containing functional groups on multi-walled carbon nanotubes for enhanced elemental mercury removal	19
Application of active and environment-friendly poly (3-hydroxybutyrate)/grapeseed oil/MgO nanocomposite packaging for prolonging the shelf-life of cherry tomatoes (Solanum lycopersicum L. var. cerasif	19
Accelerated aging resistance, abrasion resistance and other properties of alkali-activated slag mortars containing limestone powder	18
An updated review of recent applications and future perspectives on the sustainable valorization of pitaya (Hylocereus spp.) by-products	18
Ultraviolet protection of textiles with herbal dyes: A contemporary review	18
Mechanical and durability performance of alkali-activated slag cement concretes with carbonate and silicate activators	18
Extraction optimization of neem bioactives from neem seed kernel by ultrasonic assisted extraction and profiling by UPLC-QTOF-ESI-MS	18
Critical issues hindering a widespread construction and demolition waste (CDW) recycling practice in EU countries and actions to undertake: The stakeholder's perspective	18
Trichosanthes kirilowii Maxim seed kernel oil: The optimization of ultrasound-assisted extraction and evaluation of its potential as a novel biodiesel feedstock	18
Synthesis of coumarin dimers by a microwave-assisted double multicomponent reaction	18
Grapefruit IntegroPectin isolation via spray drying and via freeze drying: A comparison	17

Tailored biopolymer and its nanocomposites along with EPR frameworks under circular economy: A dual strategy for sustainable packaging solutions	17
Nanocellulose/natural rubber latex composite film with high barrier and preservation properties	17
Editorial: Circular economy: State of the art and future trends	17
Assessing the impacts of precipitation on water yield estimation in arid environments: Case study in the southwestern part of Saudi Arabia	17
Shape-controlled fabrication of zein and peach gum polysaccharide based complex nanoparticles by anti-solvent precipitation for curcumin-loaded Pickering emulsion stabilization	17
Zwitterionic resorcinarene bifunctional organocatalyst for the cycloaddition of carbon dioxide to epoxide	17
Pyrolysis behaviour of shellfish waste via TG-FTIR and Py-GC/MS	17
A novel strategy to improve the recovery of phenolic compounds from Pistacia lentiscus L. fruits using design-based statistical modeling for ultrasound-deep eutectic solvents extraction and the evalua	17
Deep eutectic solvents for extraction of functional components from plant-based products: A promising approach	17
Preparation of calcium sulfate hemihydrate whiskers from chlor-alkali brine sludge and industrial waste under normal pressure	17
Preparation and characterization of fish-derived protein hydrolysate and assessment of its effect on tomato and sorghum plants growth and productivity	17
Flavonoids as benign substitutes for more harmful synthetic chemicals - effects of flavonoids and their transformation products on algae	17
Preparation and characterization of highly loaded meperfluthrin microemulsions with green sugar-based surfactants	17
Benefits of pre-treating MSWI fly ash before alkali-activation	17
A novel eco-friendly inhibitor of chayote fruit extract for mild steel corrosion in 1 M HCl: Electrochemical, weight loss studies, and the effect of temperature	17
Current status of phosphoric acid preparation technology and future application directions of microbial methods	17
Green extraction and optimization of bioactive compounds from Solanum torvum Swartz. using ultrasound-aided solvent extraction method through RSM, ANFIS and machine learning algorithm	17
Coupling several spectral manipulations with isosbestic approach to resolve overlapped spectra for concurrent analysis of lamivudine/tenofovir combination: Evaluating environmental sustainability	17
Evaluating and modelling a decentralised community-based waste collection system in developing São Tomé city	17
Pyrolysis and ANN-based modeling of copper-impregnated nylon fishing net waste	16
Approach to the circular economy through agro-livestock waste composting with heat recovery and agricultural use of the resulting compost	16
Olive-mill and grape-mill waste as a substitute growing media component for unexploded vegetables production	16
Gd-Co-Fe perovskite mixed oxides as catalysts for dry reforming of methane	16
Valorization of PDMS-coated glassine wastepaper for microcrystalline cellulose: Extraction and physicochemical characterization	16
A review on preparation raw materials, synthesis methods, and modifications of hydroxyapatite as well as their environmental applications	16
The comparison of hydrothermal, ultrasonication and microwave assisted alkalization of cellulose from Borassus flabellifer fruit husk	16
Synthesis of environmentally benign new ionic liquids for the preparation of 2-aryl/heteroaryl benzimidazoles/benzoxazoles under ultrasonication	16
Effect of Triton X-100 on Shiraia laccase production and its application in triclosan biodegradation	16
Biosynthesis, protease optimization and purification of alkaline serine from Shewanella algae and its potential application as silver recovery	16
Bacterial phototoxicity of lumichrome photocrosslinked collagen hydrogels	16
Effect of binary combination of waste gypsum and fly ash to produce building bricks	16
Extraction of valuable compounds from granadilla (Passiflora ligularis Juss) peel using pressurized fluids technologies	16
Tailoring mixed microbial consortia for sustainable biodiesel: An attempt towards synergistic biomass production and cost-effective harvesting in pilot scale open cultivation	16
The impact of oxides of cementitious materials on mortar strength: A machine learning perspective	16
Chemo-enzymatic synthesis of 5-substituted ribavirin analogs: Unexpected cooperative effect in the interaction of 5-alkyloxymethyl 1,2,4-triazol-3-carboxamides with E. coli purine nucleoside phosphory	16
Household food waste composting habits and behaviours in Hungary: A segmentation study	16
The utility of bioremediation approach over physicochemical methods to detoxify dyes discharges from textile effluents: A comprehensive review study	16
Extraction and optimization of sulforaphane using green methods from cruciferous vegetable seeds	16
Microbial biostimulant counteracts negative effects of herbicides on oilseed rape growth	16
Environmentally sustainable technology for the treatment of electrolytic manganese residue: Enabling harmless disposal and utilization in building materials	15
Biovalorisation of mixed food waste through newly isolated thermo tolerant fungal cell factories: A step toward transforming waste to wealth	15
Characterization of invasive aquatic plant Egeria densa: A sustainable potential source of bioactive compounds within the circular bio-economy	15
Collagen hydrolyzed extract derived from leather waste as a multifunctional additive for the preparation of granular fertilizer	15
On an intensification factor for green chemistry and engineering: The value of an operationally simple decision-making tool in process assessment	15
Valorization of sturgeon notochord to obtain antioxidant non-collagenous peptides from the purification process of chondroitin sulfate	15
Comparative study of alkali activated cements based on metallurgical slags, in terms of technological properties developed	15
Simulation and optimization of CO2 mineralization for sustainable cement production	15
Ecodesign of new circular economy scheme for Brewer's side streams	15
60Co-γ-ray-irradiated edible silkworm (Bombyx mori) pupae-assisted protease digestion: A strategy for obtaining low molecular weight bioactive peptides	15
An insight into the mechanical and morphological properties of palm oil plasticized high density polyethylene-chitosan composites	15
Green spectrophotometric method for the spectral pattern recognition based on fuzzy inference system compared to continuous wavelet transform for the quantitative determination of anti-psoriasis drugs	15
Waste biomass-derived CQDs and Ag-CQDs as a sensing platform for Hg2+ ions	15
Analytical Green Star Area (AGSA) as a new tool to assess greenness of analytical methods	15
Direct borylation of alcohol over bifunctional copper/zeolite catalyst	15
Electrodialytic lithium extraction from secondary resources: Technical, environmental and economic assessment	15
Effect of deep eutectic solvents on the biocatalytic properties of β-glucosidase@ZnOFe nano-biocatalyst	15
Optimization of the extraction of antioxidant compounds from grape seed from winemaking waste	15
Selective synthesis of alpha monoglycerides by a clean method: Techno-economic and environmental assessment	15
Sustainable production of 5-hydroxymethylfurfural from fructose and inulin using active and stable acidic ionic liquids as homogeneous and heterogeneous catalysts	15
Optimization of fishbone biochar preparation process based on adsorption performance	15
Recent advancement in bio-based adhesives derived from plant proteins for plywood application: A review	15
Expanding the Horizon of eco-friendly Poly(glycolic acid) to the packaging industry: Synthesis and modification	15
Enhancement of mechano-structural characteristics of silk fibroin using microwave assisted degumming	15
Development of leaching agents and mechanisms for rare earth element leaching from ion adsorption clay	15
Radical scavenging and antimicrobial activities of diarylheptanoids and steroids from Etlingera calophrys rhizome	15
Bioactive fatty acids and compounds from Spirulina (Arthrospira) platensis: Potential as biostimulants for plant growth	14
Novel caffeic acid grafted chitosan-sodium alginate microcapsules generated by microfluidic technique for the encapsulation of bioactive peptides from silkworm pupae	14
Optimal mixture design method for low-CO2 limestone-calcined clay cement (LC3) concrete considering climate change and carbonation durability: A case study of eight countries	14
Microwave-assisted continuous flow synthesis of propofol	14
Effect of ultrasound, microwave, and enzymatically pre-treated Terminalia chebula pulp on extraction of bioactive compounds using supercritical CO2	14
Spirobifluorene copolymers incorporating phenanthroline and phenothiazine for selective CO2 adsorption and hydrogen uptake	14
T3P®-Assisted cascade synthesis of N-acyl α-cyanoamines, cyanoaryl amides and N-acyl cyanoarylamines: Application in making three pharmaceutically important molecules	14
Transformation of furfural into dimorpholinocyclopentenone using Al-SBA-15 materials	14
Ionic liquid as regenerable media for simultaneous recovery of melanin and amino acid from waste human hair: An elaborate and efficient biorefining approach	14
Improving circularity in municipal solid waste management through machine learning in Latin America and the Caribbean	14
Recovering ammonium from real treated wastewater by zeolite packed columns: The effect of flow rate and particle diameter	14
Chemical characterization and performance optimization of waste glass-modified concrete for sustainable construction	14
Microstructural and mechanical evolution of recycled fiber-reinforced tunnel slag concrete under wet-dry cycles	14
Optimization of bioactive compounds recovery from thuya solid residues using ultrasound and nonionic surfactants assisted extraction: A response surface methodology study	14
Valorization potential of dried tannery fleshing wastes (TFW) through pyrolysis in the leather industry: Kinetic and thermodynamic investigations	14
Olive-mill and grape-mill residue impact the growth, physiology and nutrient status of grapevines young cuttings	14
Using green solvents as co-solvent in supercritical carbon dioxide extraction: A promising source of extracts rich in antioxidants and antimicrobials agents	14
High-temperature anaerobic calcination for stabilizing environmentally stressful elements in phosphoric acid production by-products	14
Optimization of the preparation of high-purity ellagic acid from blueberry pomace through an antisolvent precipitation method	14
The building stock as an urban mine: The case of the circular regeneration of disused buildings	14
Partial characterization of β-glucosidase, β-xylosidase, and α-l-arabinofuranosidase from Jiangella alba DSM 45237 and their potential in lignocellulose-based biorefining	14
Magnesium modified activated carbons derived from coconut shells for the removal of fluoride from water	13
Industrial sludge conversion into biochar and reuse in the context of circular economy: Impact of pre-modification processes on pharmaceuticals removal from aqueous solutions	13
Microbial degradation of polystyrene microplastics by a novel isolated bacterium in aquatic ecosystem	13
Preparation and investigation of green and cheap deep eutectic solvents for determination of essential and toxic metal ions at trace levels in different coffee products	13
Ethical issues pertaining to sustainable biodiesel synthesis over trans/esterification process	13
Hydrophilic deep eutectic solvents: A new generation of green and safe extraction systems for bioactive compounds obtaining from natural oil & fats – A review	13
Cyclodextrin-assisted extraction as a green alternative for the recovery of phenolic compounds from Helichrysum plicatum DC. flowers	13
Modeling and optimization of Acid Orange 7 adsorption process using magnetite/carbon nanocomposite	13
Synergistic recovery of aluminum phosphorus from incinerated sewage sludge ash via acid and alkaline treatment	13