OOIR: Observatory of International Research

Papers

(The median citation count of Sustainable Energy & Fuels is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)

Article	Citations
Revealing the impact of the host-salt non-stoichiometry on the performance of perovskite solar cells	281
Ultrathin electron and proton-conducting membranes for nanoscale integrated artificial photosystems	226
A rational strategy for substantially enhancing the solar-utilization efficiency and organic-pollutant-degradation rate via mediated central processing unit filling	176
Photocatalytic CO₂ reduction to methanol integrated with the oxidative coupling of thiols for S–X (X = S, C) bond formation over an Fe₃O₄/BiVO₄ composite	125
Front cover	118
The synergistic effect of fluorine atom and alkyl chain positions in enhancing organic photovoltaic open-circuit voltage and morphology miscibility	115
Back cover	111
Back cover	108
Inside front cover	102
Correction: Photocatalytic CO₂ reduction to methanol integrated with the oxidative coupling of thiols for S–X (X = S, C) bond formation over an Fe₃O₄/BiVO₄	100
Microbubble synthesis of hybridised bacterial cellulose–gelatin separators for multifunctional supercapacitors	94
Inside front cover	84
Correction: Tribo-piezoelectric nanogenerators for energy harvesting: a first-principles study	82
Front cover	71
Back cover	71
Hydrodeoxygenation reactivity of the carbonyl group and carboxyl group and their interaction: taking 2-pentanone, valeric acid, and levulinic acid as examples	66
Contents list	64
Contents list	63
Comprehensive insights into the impact of straw types, temperature and atmosphere on pyrochar properties and its enhancement potential for anaerobic digestion	59
Perspectives and advances in consolidated bioprocessing strategies for lignin valorization	57
Biocrude production via hydrothermal liquefaction of Canadian lignocellulosic residues for sustainable transportation: screening, catalytic effect, and modelling	56
Methane conversion coupled with hydrogen production from water using Au/Ga₂O₃ photocatalysts prepared by different methods	56
Hard–soft carbon decorated Na₃V₂(PO₄)₃ cathode for high-rate and stable sodium-ion batteries	55
Enhanced room-temperature thermoelectric power factor of β-Zn₄Sb₃ thin films via surface roughness optimization	54
Free-standing P-doped Fe₂O₃/ZnO nanotubes as a bifunctional electrocatalyst for electrochemical water splitting	52

Hollow Sb nanocrystals confined in N, S Co-doped carbon nanofibers boosting sodium-ion transport for high-performance sodium-ion batteries	51
Front cover	50
Enhanced performance of carbon-based CsPbI₂Br perovskite solar cells using interfacial modifiers	49
Front cover	47
Highly efficient Ru-decorated CeO₂ for photocatalytic hydrogenation and cyclization of levulinic acid to γ-valerolactone	46
Fusion of nitro isomers of naphthoquinone enhances capacity and cyclability in Zn-ion batteries	45
The annual-hydrogen-yield-climatic-response ratio: evaluating the real-life performance of integrated solar water splitting devices	44
Sulfhydryl modified silver-titanium oxide to effectively and stably promote the electrocatalytic reduction of carbon dioxide to CO	44
Dual engineering of electronic structure and nanoconfinement for high-efficiency ammonia borane hydrolysis over PtCo-oxCNH catalysts	44
A bifunctional electrocatalyst for alkaline seawater splitting using ruthenium doped nickel molybdenum phosphide nanosheets	43
Hierarchical layered nickel–iron double hydroxide/carbon nanotube fiber electrode for constructing asymmetric fiber supercapacitor	42
Solar to hydrogen efficiency of 28.2% under natural sunlight achieved by a combination of five-junction concentrator photovoltaic modules and electrolysis cells	41
Rapid laser synthesis of medium-entropy alloy nanostructures for neutral seawater electrolysis	41
Synthesis of urea from CO₂ and N₂ fixation under mild conditions using polarized hydroxyapatite as a catalyst	40
Nitro-oxidized carboxylated cellulose nanofiber based nanopapers and their PEM fuel cell performance	40
What is necessary to fill the technological gap to design sustainable dye-sensitized solar cells?	39
A ZIF-8 composite SiO₂-enhanced high-performance PEO-based solid-state electrolyte for Li-metal batteries	39
Advancing hydrothermal liquefaction of Canadian forestry biomass for sustainable biocrude production: co-solvent integration, co-liquefaction, and process optimization	39
Dopant-free fluorene based dimers linked with thiophene units as prospective hole transport materials for Sb₂S₃ solar cells	39
Hydrolysis of anhydrosugars derived from pyrolysis of lignocellulosic biomass for integration in a biorefinery	39
Modulating CsPbBr₃ nanocrystals encapsulated in PCN-224(Zr) for boosting full-spectrum-driven CO₂ reduction: S-scheme transfer, photothermal-synergistic effect, and DFT calculati	38
Plasmonic Au nanoparticle sandwiched CuBi₂O₄/Sb₂S₃photocathode with multi-mediated electron transfer for efficient solar water splitting	38
State and prospects of photovoltaic module waste generation in China, USA, and selected countries in Europe and South America	38
Statistical analysis of ethanol/diesel dual-fuel combustion of compression ignition engines in RCCI mode using multi-injection strategies	37
Improving levoglucosan and hydrocarbon production through gas-phase synergy during cellulose and polyolefin co-pyrolysis	37
Synthesis of an SBA-15 supported NiPtN catalyst for dehydrogenation of hydrazine hydrate	37
Nitrogen-doped porous carbon nanosheets as a robust catalyst for tunable CO₂ electroreduction to syngas	36
A layered double hydroxides/MXene composite based triboelectric nanogenerator for energy harvesting and self-powered electroplating applications	36
The structural factors affecting the sensory properties of polyaniline derivatives	36
Prediction of sustainable aviation fuel properties for liquid hydrocarbons from hydrotreating biomass catalytic fast pyrolysis derived organic intermediates	35
Platform chemicals from hardwood black liquor via hydrothermal liquefaction: influence of process conditions on product yields and quality	35
Vanadium-doped cobalt selenide: an efficient bifunctional electrocatalyst for overall water splitting	34
Synthesis of P-doped CdS nanorods for efficient blue LED light induced photocatalytic hydrogen evolution	34
Unveiling the mechanism of CO₂ electroreduction to C₁ and C₂ products of ordered double transition metal MXenes	34
Graphene-based materials as electrocatalysts for the oxygen evolution reaction: a review	34
Catalytic heterostructured materials for CO₂ mitigation and conversion into fuels: a renewable energy approach towards a sustainable environment	34
Effect of ZnO and PEDOT:PSS charge selective layers on photovoltage of cuprous oxide (Cu₂O) heterojunction solar cells	34
Rational design of a g-C₃N₄/Bi₂S₃/ZnS ternary heterojunction photoanode for improved solar water splitting	34
Enhanced electrochemical discharge of Li-ion batteries for safe recycling	34
An integrated carbonized wood-based gas-diffusion electrode for high-current-density CO electrosynthesis in flow cells	33
Dual functions of a microfluidic fuel cell as electricity generation and liquid pumping units	33
An integrated approach to waste tire pyrolysis for value-added products: process optimization and a comprehensive economic study for scalability	33
A geothermal energy techno-economic analysis for downhole wellbore hydrogen production from biogas with subsurface carbon retention	33
Back cover	32
Inside front cover	32
Front cover	32
Inside front cover	31
Correction: Effects of the support on bifunctional one-step synthesis of methylal via methanol oxidation catalysed by Fe–Mo-based bifunctional catalysts	31
Back cover	31
Front cover	30

Transition metal-based coordination polymers of bipyridyl-ethylene for sunlight-driven photocatalytic CO₂ reduction into CO	30
(111) Facet-engineered SnO₂ as an electron transport layer for efficient and stable triple-cation perovskite solar cells	30
Infant diaper waste-derived multifunctional MoN-Ni₃C@CFs for full water splitting at neutral and alkaline pH and solar-to-hydrogen conversion: a win–win combination	30
Catechin-induced cellulose: a new material for harvesting triboelectricity	30
Evaluation of environmental impacts of a perovskite solar cell with a p-i-n meso-superstructured architecture through life cycle assessment	30
Recent advances in transition metal dichalcogenide-based heterostructured materials for electrochemical water splitting applications	30
NiO composites with blackberry seed-derived activated carbon (NiO/BBSDAC) for the improved electrochemical behavior of lithium-ion battery anodes	30
Facet-dependent photocatalytic activities of BiOBr explored through pattern illumination time-resolved phase microscopy	29
Solar rechargeable battery using the lithium-ion storage mechanism in high capacity MoO₃ films	29
Archetypical 2D sheet-like Cu₂MoS₄ for all-solid-state symmetric pseudocapacitors with ultra-steady performance efficiency	29
Catalytic cracking and deoxygenation of cottonseed oil to yield light olefins over lanthanum-impregnated zeolite catalysts	28
High surface area MnO₂nanomaterials synthesized by selective cation dissolution for efficient water oxidation	28
Latest advances in research methods for high-yield cellulase production	28
Transient HCO/HCOO⁻ species formation during Fischer–Tropsch over an Fe–Co spinel using low Ribblet ratio syngas: a combined operando IR and kinetic study	28
Organic semiconductor nanoparticles for visible-light-driven CO₂ conversion	28
Boosted photoredox capability of visible light-active P-doped C₃N₄ with efficient harvesting of electron–hole pairs	28
FeCo alloy nanoparticles encapsulated in hollow N-doped carbon as a bifunctional electrocatalyst for aqueous zinc–air batteries with a low voltage gap	28
Selective conversion of hydroxymethylfurfural to diformylfuran using copper hydroxide nitrate with various nano-structures: a comparative study	27
Superior performance of silicon nanowires@void@carbon on a conductive substrate as a scalable binder-free anode electrode for lithium-ion batteries	27
Performance evaluation of an automotive thermoelectric generator with a non-isometric distributed fin heat exchanger	27
Na-ion dynamics in the solid solution Na_xCa_1−xCr₂O₄ studied by muon spin rotation and neutron diffraction	27
Hydrocarbons from kraft pulp pre-hydrolysis liquors in two steps using heterogeneous catalysis	27
Towards the thermal stability of dye-sensitized solar cells for wavelength-selective greenhouses using the polymorphism of light-scattering layers	27
Front cover	26
Aluminum methylamidoborane complexes: mechanochemical synthesis, structure, stability, and reactive hydride composites	26
Coordination of Ti³⁺ and Ni³⁺ to promote the electrocatalytic OER properties of SrTiO₃@TiO₂ heterojunctions	26
An asymmetric polyether sulfone membrane as an efficient separator in aluminium–graphite batteries with EMIMCl/AlCl₃ electrolyte	26
Contents list	26
Front cover	26
Chemical reduction of Prussian blue nanocubes to obtain alkali ion containing cathodes and their battery applications	25
Remarkable power factor improvement in a porous, nanostructured thermoelectric oxide functionalized with viologen molecules	25
Interfacial modification of Zn foil electrode with cationic surfactants enables efficient and selective CO production from CO₂ electroreduction	25
Hierarchical ZSM-5 nanosheets for production of light olefins and aromatics by catalytic cracking of oleic acid	25
Novel benzodithiophene-TTBTBTT copolymers: synthesis and investigation in organic and perovskite solar cells	25
Highly active Pd–ZrO₂ electrodes for hydrogen evolution reaction	25
Front cover	25
Thermal-integration in photoelectrochemistry for fuel and heat co-generation	25
Enhanced electron collection in a particulate LaTiO₂N photoanode assembled with an inserted ZnO nanorod array for photoelectrochemical water oxidation	25
Cobalt-doped vanadium nitride composite carbon hollow spheres for enhanced lithium–sulfur battery performance: overcoming sulfur dissolution and the shuttle effect	25
Organic materials as charge hosts for pseudocapacitive energy storage	24
Enhanced discharge capacity of thermorechargeable batteries composed of Cd-PBA and a potential-matched PBA	24
Nano-interfaced tungsten oxide decorated on layered double hydroxides for the oxygen evolution reaction	24
Preparation of a N-doped Si/Cu/C anode for high-performance lithium-ion batteries	24
An efficient self-driven fog harvesting system based on a Kelvin waterdrop generator	24
Synthesis of hierarchical MFI zeolite by interzeolite conversion of spent FAU zeolite for the methanol-to-olefins reaction	24
Three-dimensional porous metal phosphide cathode electrodes prepared via electroless galvanic modification for alkaline water electrolysis	24
Facile preparation of N-doped graphitic carbon encapsulated nickel catalysts for transfer hydrogenolysis of lignin β-O-4 model compounds to aromatics	24
Synergistic action of highly-active porous carbon-based bifunctional electrocatalysts and neutral electrolyte: endowing zinc–air batteries with ultra-long cycle stability	24
Effect of ZrO₂/CeO₂ mixed oxides on fuel gas production during self-sustaining smouldering combustion of lignocellulosic wastes	24
Cellulose as sacrificial agents for enhanced photoactivated hydrogen production	24
Stable lithium plating/stripping electrochemistry promoted by a MnO₂ modified copper current collector for stable lithium metal anodes	23
Designing idealised devices for bias-free solar water splitting	23
Integration of formic acid dehydrogenation with electrochemical pumping for the generation of clean hydrogen	23
The pretreatment of softwood chips and pellets by alkali sulfonation and thermomechanical pulping and its influence on lignin redistribution and the enzyme mediated hydrolysis of the cellulose compone	23
A brief review of in situ spectroscopic methods and electrochemical sensors as essential evaluation tools for the electrochemical reduction of CO₂ (ElRC)	23
Back cover	23
An electric-field regulated crystallization process for enhanced performance of perovskite solar cells	23
Enhancing FAPbI₃ perovskite solar cell performance with a methanesulfonate-based additive	23
Precise control of TiO₂ overlayer on hematite nanorod arrays by ALD for the photoelectrochemical water splitting	23
Energy, economic, and environmental impacts assessment of co-optimized on-road heavy-duty engines and bio-blendstocks	23
A perspective on the evolution and journey of different types of lithium-ion capacitors: mechanisms, energy-power balance, applicability, and commercialization	22
On the understanding of bio-oil formation from the hydrothermal liquefaction of organosolv lignin isolated from softwood and hardwood sawdust	22
Efficient electrochemical water oxidation catalyzed by N₄-coordinated nickel complexes under neutral conditions	22
A critical review of hydrogen storage: toward the nanoconfinement of complex hydrides from the synthesis and characterization perspectives	22
Navigating the challenges of global NO_x emissions throughout the energy transition: state of play and outlook	22
Self-shape-transformable 3D tessellated bifacial crystalline Si solar cell module enabling extra energy gain through intervals and an integrated actuator	22
Techno-economic analysis of a solar-driven biomass pyrolysis plant for bio-oil and biochar production	22
Contents list	21
Back cover	21
Contents list	21
New nonflammable tributyl phosphate based localized high concentration electrolytes for lithium metal batteries	21
The cooperative role of nitrogen defects and cyano-group functionalization in carbon nitride towards enhancing its CO₂photoreduction activity	21
A wave energy harvesting system for applications in deep-sea exploration	21
Contents list	21
Back cover	21
Front cover	21
A conjugated polymer coupled with graphitic carbon nitride for boosting photocatalytic hydrogen generation under visible light	21
Simultaneous non-invasive gas analysis in artificial photosynthesis reactions using rotational Raman spectroscopy	21
Flexible laser-induced graphene-based electrodes modified with cobalt-manganese hexacyanoferrate as cathode materials for asymmetric supercapacitors	21
Back cover	21

Contents list	21
Novel porous Al-based composites for improved Al–water reaction performances by spark plasma sintering	21
Correction: Carbon onion/sulfur hybrid cathodes via inverse vulcanization for lithium–sulfur batteries	21
Surface anchored atomic cobalt-oxide species coupled with oxygen vacancies boost the CO-production yield of Pd nanoparticles	21
Back cover	21
Electronic structure regulation of RuIrTaO_x induces highly efficient acidic OER	21
Synthesis of jet fuel and diesel range cycloalkanes with 2-methylfuran and benzaldehyde	20
Porous silicon-nanowire-based electrode for the photoelectrocatalytic production of hydrogen	20
Enhancing the efficiency of non-fullerene organic solar cells by using a volatilizable solid additive system	20
Optimal design of a coupled photovoltaic–electrolysis-battery system for hydrogen generation	20
Research progress of coal gangue-based modified materials and the sewage treatment field	20
Machine learning prediction on adsorption capacities of steam methane reforming off-gas in silica gels	20
Sustainable syngas generation from methane: enhanced catalysis with metal-promoted nickel on silica–alumina composites	20
Construction of a highly active and water-resistant Ni-based catalyst for the HDO reaction of phenol	20
Front cover	20
Front cover	20
Rational design of a g-C₃N₄/CdS/MIL-125 (Ti)-derived TiO₂ ternary heterojunction as a highly efficient photocatalyst for wastewater treatment under visible-light irrad	20
A manganese complex on a gas diffusion electrode for selective CO₂ to CO reduction	20
Boosting oxygen evolution with electrodes composed of metal sulfides and hydrogen bonded organic frameworks	20
In situ characterization techniques for electrochemical nitrate-to-ammonia conversion	20
Application of rich-defect expanded graphite with improved ion transport and kinetics for sodium storage at low temperature	20
Aging of quinoxaline-based polymer solar cells under UV-free white light	20
Electrode engineering considerations for high energy efficiency Li–CO₂ batteries	20
Selective placement of modifiers on hematite thin films for solar water splitting	20
Enhancing photovoltaic efficiency and sustainability: the role of ion beam technology and AI integration	19
A new type of pyranthrene-based copolymer as a promising hole-transport material for perovskite solar cells	19
Exploring the air stability of all-inorganic halide perovskites in the presence of photogenerated electrons by DFT and AIMD studies	19
Carbon capture from corn stover ethanol production via mature consolidated bioprocessing enables large negative biorefinery GHG emissions and fossil fuel-competitive economics	19
A review of recent progress on enhancing the stability of CsPbX₃ perovskite solar cells	19
Magnetically recoverable high-entropy alloy catalyst in carbon matrix for ammonia borane-driven hydrogen evolution and electrocatalytic hydrogen production	19
Effect of ancillary ligand substitution on photocatalytic hydrogen production	19
Highly stable CsFAPbIBr perovskite solar cells with dominant bulk recombination at real operating temperatures	19
Optimization of bacterial biorefineries for sustainable biodiesel production and flue gas reduction: a holistic approach to climate change mitigation and circular economy	19
Sustainable porous carbons from tannic acid based KOH activated as high-performance CO₂ capture sorbents	19
Experimental and computational analysis of Ni–P and Fe–P metal foams for enhanced hydrogen evolution reaction in alkaline media	19
Nanoceramics Materials for Next generation High-Efficiency Energy Storage, Energy Conversion and Energy Transmission Systems	19
Application and research progress of transparent radiative cooling materials – a review	19
Direct ink writing-based 3D printing of supercapacitors for flexible and wearable electronic applications	19
High-purity hydrogen production from real biomass pyrolysis vapors via a chemical looping process	19
Enhanced thermoelectric properties of Cu_1.8S via the introduction of ZnS nanostructures	19
A facile approach to deposit high performance electrocatalyst high entropy oxide coatings using a novel plasma spray route for efficient water splitting in an alkaline medium	19
A novel covalent triazine-based frameworks as photocatalysts for the degradation of dyes under visible light irradiation	19
Predicting the physical properties of three-component lignocellulose derived advanced biofuel blends using a design of experiments approach	19
Tunable electrocatalytic H ₂ evolution activity of nickel-dithiolene coordination polymers	19
Correction: A review on thermochemical based biorefinery catalyst development progress	18
MXene nanosheet-reinforced chitosan as a stable photothermal evaporator for efficient solar evaporation	18
Unravelling the role of iron carbide in oxygen reduction catalysts for rechargeable zinc–air batteries: a comprehensive kinetics & mechanistic study	18
Design of thick electrodes for high-performance lithium-ion batteries: a comprehensive perspective under coupled kinetics and thermodynamics	18
Front cover	18
Chloride-improved crystallization in sequentially vacuum-deposited perovskites for p–i–n perovskite solar cells	18
Recombination vs. dye packing: role of structural tailoring of triphenylamine-based D–π–A dyes for outdoor/indoor photovoltaics with dual-species copper electrolytes	18
A genipin-crosslinked chitosan hydrogel as a quasi-solid-state electrolyte for sustainable electrochemical capacitors	18
Correction: On the environmental competitiveness of sodium-ion batteries under a full life cycle perspective – a cell-chemistry specific modelling approach	18
Back cover	18
Maximizing sustainable bioethanol production from food waste: progress in diverse pretreatment methods and integration of artificial intelligence	18
Pentafluorosulfanyl-functionalised BODIPY push–pull dyes for p-type dye-sensitized solar cells	18
Adsorptive denitrogenation of model fuel with silica gel	18
Contents list	18
Destabilization of ammonia borane via dual confinement in a cobalt-based Prussian blue analogue	18
Enhanced thermal management in CO₂ methanation using spiral-structured catalysts: a comparative study with honeycomb, monolith, and packed-bed systems	18
Expression of biocatalysts and their use in monomer synthesis for biodegradable polymers from acetone and CO₂	18
Dendrite-free deposition and side-reaction suppression of zinc anodes achieved via constructing synergistic interface buffer layers	18
Back cover	18
Salicylic acid treated Li₇La₃Zr₂O₁₂ achieves dual functions for a PEO-based solid polymer electrolyte in lithium metal batteries	18
Potassium-modified bifunctional MgAl-SBA-15 for aldol condensation of furfural and acetone	18
Sb₂S₃ solar cells with a cost-effective and dopant-free fluorene-based enamine as a hole transport material	18
High performance alkyl dialkoxyalkanoate bioderived transportation fuels accessed using a mild and scalable synthetic protocol	18
The electrochemical and physicochemical impacts of sodium chloride on the formation of a self-healing double network hydrogel using two methods – post-treatment and in situ integration	18
Ferromagnetic–antiferromagnetic interfaces in MAX phase electrocatalysts: a spin-driven platform for enhanced oxygen evolution reaction	18
Visible light induced efficient photocatalytic hydrogen production by graphdiyne/CoSe ohmic heterojunction	18
Distinctive conductivity improvement by embedding Cu nanoparticles in the carbon shell of submicron Si@C anode materials for LIBs	17
An interesting carrier: the excellent performance of Nb₂O₅ in biomass hydrodeoxygenation	17
Inside front cover	17
A new simple volatile solid additive triggers morphological optimization and performance stabilization in polymer solar cells	17
All-redox hybrid supercapacitors based on carbon modified stacked zinc cobaltite nanosheets	17
Kinetic study of catalytic formic acid dehydrogenation by in situ UV-vis spectroscopy	17
NiO–Ti nanocomposites for contact electrification and energy harvesting: experimental and DFT+U studies	17
Comparative life cycle assessment of corn stover conversion by decentralized biomass pyrolysis-electrocatalytic hydrogenation versus ethanol fermentation	17
Oxalate metal–organic framework derived atomic Ru³⁺-doped Co(OH)₂nanosheets for a highly efficient hydrogen evolution reaction	17
First evaluation of multifunctional poly(ionic liquid)s as novel strong bases in directional efficient valorization of lignin	17
Single atom functionalization in vanadium dichalcogenide monolayers: towards enhanced electrocatalytic activity	17
Enhanced oxygen transfer rate of chemical looping combustion through lattice expansion on CuMn₂O₄ oxygen carrier	17
Sustainable robust waste-recycled ocean water-resistant fly ash-carbon nanotube nanocomposite-based triboelectric nanogenerator	17
Infiltration of nickel and copper catalysts into a GDC backbone assisted by supercritical CO₂ for efficient SOFC anodes	17
Design and synthesis of multifaceted dicyanomethylene rhodanine linked thiophene: a SnO_x–perovskite dual interface modifier facilitating enhanced device performance through improved	17
Triggering the water oxidation kinetics of NiMoO-NC for sustainable green hydrogen production	17
Fine comminution of torrefied wheat straw for energy applications: properties of the powder and energy balances of the production route	17
Aqueous phase hydrogenation of maleic acid to succinic acid mediated by formic acid: the robustness of the Pd/C catalytic system	17
Facile and scalable bilayer polymer encapsulation to achieve long-term stability of perovskite solar cells under harsh humidity conditions	17
Optimal dispatch of integrated energy systems incorporating diversified energy storage under a long- and short-term synergistic strategy	17
Experimental study on hydrogen-rich fuel generation via ammonia decomposition using a structured catalytic reactor	17
NaCl-templated synthesis of soybean-derived nitrogen-rich mesoporous carbon material: iron phthalocyanine integration for four-electron oxygen reduction	16
Reaction kinetics for ammonia synthesis using ruthenium and iron based catalysts under low temperature and pressure conditions	16
Printing of tin perovskite solar cells via controlled crystallization	16
Chemically pre-lithiated/sodiated reduced graphene oxide–antimony oxide composites for high-rate capability and long-term cycling stability in lithium and sodium-ion batteries	16