Composites Communications

Article	Citations
Self-assembly of cellulose fibers and polyoxometalate for stable photoluminescence	119
Editorial Board	116
Tailoring 3D conductive networks as wearable sensors for pressure or temperature sensing	101
A thermochemical and rheological model incorporating inhibition time for highly reactive polyester resins in liquid moulding processes	99
Layer-by-layer macroassembly of inorganic CNTs and MXenes with organic PVA for enhancing the interfacial properties of carbon fiber/epoxy composites	98
Ultra-high temperature transverse and longitudinal compressive properties and failure mechanism of fine woven pierced C/C composites up to 2000 °C	97
Pore fractal characteristics and ANN model of polyacrylonitrile fiber reinforced concrete under the synergistic effects of freeze-thaw and erosion	84
Construction of CF@ZIF-67 reinforcements with a polyphenol-based interlayer for enhanced interfacial properties of PPESK composites	84
Design and properties of graphene/polyacrylic composites with a square-tooth array structure for ultrahigh through-plane thermal conductivity	71
Investigation on damping performance of flax fiber reinforced composites with bio-inspired spiral stacking sequences under freeze-thaw cycling	70
Novel insights into microstructural characteristics and tensile failure mechanisms in hardened binder paste: Integrating Micro-CT with peridynamics	67
Janus membrane with bionic venation structure: A hydrophilic - hydrophobic fiber membrane for double - sided fog collection	65
Functionally graded ceramics (FGC) dental abutment with implant-supported cantilever crown: Finite element analysis	65
How to optimize the interfacial structure of carbon fiber/phenolic resin composites based on rigidity-flexibility balance?	65
Design of 2d charring-foaming agent for highly efficient intumescent flame retardant polylactic acid composites	62
Scalable and simply-fabricated paint for waterproof and passive radiative cooling	61
A high-throughput method to determine the electrical percolation threshold of conductive polymer nanocomposite inks via gradient direct ink writing	61
Multifunctional conductive textile for efficient electrothermal conversion and triboelectric nanogenerators	59
Anisotropic composite sensor based on CF/CB for strain and pressure sensing	58
Poly-D-lactic acid (PDLA) and schiff base dual modifications of the cyclodextrin-Based hierarchical fire retardants towards fire safe and UV-resistant poly-L-lactic acid (PLLA)	57
A convenient swelling-permeation strategy for constructing high-performance fiber reinforced composite hydrogel	55
In-plane compressive performance of 3d-printed continuously carbon-fiber-reinforced hierarchical honeycombs composite	54
Novel insights into the morphological effects of micron-scale inorganic fillers on polyethylene composites	53
Exploring the interlaminar toughening potential of carbon nanoparticles: Structural and size effects	53
Residual tensile behavior of carbon fiber/phthalonitrile composites after isothermal and anisothermal heating	53

Preparation of CNTs-SiO2 hybrids/epoxy superhydrophobic coating with self-healing property activated by shape memory effect	53
Fabrication and property of hydrophobic polyvinyl alcohol /clay aerogel via irradiation-crosslinking and ambient-drying	51
Phase-field modeling of laser sintering degradable biopolymer	51
Zinc oxide whisker-loaded antibacterial 3D-printed polylactic acid based composite bone scaffolds with enhanced biological and mechanical performance	51
“Top-down” fabrication of anisotropic, lightweight, super-amphiphobic, and thermal insulating rattan aerogels	50
Tunable electromagnetic interference shielding performance of polypropylene/carbon black composites via introducing microcellular structure	50
In vitro and in vivo assessment of 3D-printed PCL/PLA/ZnO nanocomposite scaffolds for osteoarthritis treatment	49
Multiscale performance characterization of sequentially polymerized toughened anhydride-cured epoxy resin and its application evaluation in cryo-compressed CFRP hydrogen storage vessels	49
Microwave absorption and compression performance design of continuous carbon fiber reinforced 3D printing pyramidal array sandwich structure	48
Engineered polyamide 66-based composites towards superior electrical conductivity and enhanced toughness	48
Super-tough polylactic acid blends via tunable dynamic vulcanization of polyurethanes with ultrahigh bio-based content	48
Layer by layer self-assembly of metal-phenolic networks on carbon fibers for enhancement in interfacial adhesion of epoxy composites	48
Mechanism of interface changes of Al2O3-Yb2Si2O7/SiC coating for C/C composite under water-oxygen environment at 1500 °C	47
Enhanced properties of silicone rubber dielectric composites by incorporation of novel TiO2@Tl nanoparticles	46
Quaternion-based dynamic algorithm for random generation of solid 4D cylindrical curves in RVE modeling	46
Carbon nanotubes–Elium nanocomposite sensor for structural health monitoring of unidirectional glass fibre reinforced epoxy composite	46
Polyimide-based composites reinforced by carbon nanotube-grafted carbon fiber for improved thermal conductivity and mechanical property	45
Forming quality prediction and evaluation of polymer composite laminates under different autoclave curing pressures based on FBG sensors	45
Synergistic enhancement of dynamic energy absorption of CF/epoxy composites via expanded graphite: Effect of laminate geometry and cryogenic conditioning	45
Enhancing the electrical conductivity of 3D printed continuous carbon fibre reinforced composites via surface coating of MWCNT on filaments	45
Preparation of polymer composites with high thermal conductivity by constructing a “double thermal conductive network” via electrostatic spinning	44
Mechanism of matrix influencing the cryogenic mechanical property of carbon fibre reinforced epoxy resin composite	43
Nonlinear dynamic behavior analysis of pre-damaged (cutout) sandwich shell panel	42
Preparation of SiO2-IR3535 mosquito repellent nanocapsules and its performance study	42
Injection-molded PEO/MXene nanocomposite for polymer-based solid-state electrolyte	42
Effect of fiber type on the ablation resistance of sharp leading-edge C/C-ZrB2-SiC composites: mesophase pitch carbon fibers vs. PAN-based fibers	42
Expansion-based impregnation of poly(vinyl alcohol) into carbon nanotube networks toward high-strength nanocomposites	41
High-efficiently renewable hyperbranched epoxy resin/carbon fiber composites with both long service life and high performance	41
Effects of ceramic layer height on the mechanical properties of Cf/SiC ceramic matrix composites fabricated by fiber-laying-assisted material extrusion 3D printing	41
Magnetic properties and dielectric properties of CoFeB/NdFeB composite films at Terahertz	41
Editorial Board	41
Lithium-zinc ferrite-based chitosan/graphene oxide nanocomposite: An efficient microwave absorbing material for C and X bands	41
Synergistic ion-electron dual conduction in mechanically robust hydrogels composites for high-fidelity bioelectronics	40
Aramid resin/carbon fiber composites with integrated performance of flexibility, strength, temperature resistance and flame retardancy	39
A novel strategy accomplished by cell wall annular thickening with polymer for improving the mechanical performances of plantation wood	39
Electro–centrifugal spinning of core–sheath composite yarns with micro/nano structures for self–powered sensing	39
Vibration-microwave curing molding process of carbon fiber reinforced polymer composites	39
Polyurethane composite films with self-assembled graphene fluoride: Constructing conductive pathways for thermal management with electrical insulation	39
A characteristic curve including hygrothermal effects for predicting the failure of composite multi-bolt joints	38
Electrotunable interfacial friction of polyacrylamide composite hydrogels	38
Optimizing thermal and electrical transport pathways in polymer composites via in-situ graphite exfoliation	38
On the need to better control tooling in prepreg Automated Fibre Placement (AFP) deposition	38
Tungsten carbide-enhanced radiopaque and biocompatible PMMA bone cement and its application in vertebroplasty	38
The effect of STF-Kevlar composite materials on the impact response of fibre metal laminates	38
The addition of a small amount of fossil-based epoxy resin enables enhanced toughness and cryogenic adhesion for bio-based epoxy thermosets	38
Influence of sizing concentration on strength, stiffness, and porosity in textile grade carbon fiber (TCF)-Epoxy composites: Revealing inverse trends	38
Design of mitochondria-targeting nanocomposites for enhanced catalytic cascade in multimodal tumor therapy	38
Analysis of the tensile mechanical performance of the adhesive and rivet hybrid connection in carbon fiber reinforced composite rail vehicles	37
Mechanism of nanoscale TiB whisker improving the high-temperature strength and plasticity of TA15 matrix composite	37
Research on the anti-frost performance of hydrophobic TiN-polymer composite coating on aluminum alloy surface	37

Rate dependent piezoresistive characterization of smart aerospace sandwich structures embedded with reduced graphene oxide (rGO) coated fabric sensors	37
Multifunctional platinum(IV) nanomicelle composites for chemo-photodynamic therapy and anti-metastasis in cancer treatment	37
Enhancing thermal stability and tensile performance of short basalt fiber-reinforced PLA composites with PBAT and nano-silica	37
Effect of oxidation and quenching on microstructures and hoop tensile properties of duplex SiCf/SiC cladding tubes	37
Transition metal chalcogenides: Electronic structure, preparation, and structural tailoring to regulate microwave absorption performance	36
Shape memory polymer biocomposites for thermoresponsive self-configurable sustainable architectural applications	36
PS/PPO foam with excellent comprehensive properties prepared by integrated foaming and sintering strategy with microwave-assisted	36
A triazine-based hyperbranched char-forming agent for efficient intumescent flame retardant Poly(lactic acid) composites	36
Constructing efficient flame-retardant coatings to enhance the performances of glass fiber cloth	36
Dynamic crosslinking towards well-dispersed cellulose nanofiber reinforced epoxy vitrimer composites	36
Developing hydroxyl-functionalized bio-based itaconate elastomer/silica nanocomposites with improved dispersion and interfacial interaction	36
In-situ formation of SiC nanowires for self-healing ceramic composites using liquid silicone resin	36
Enhancing the interfacial interactions in PVDF/COF composite nanofiltration membranes for efficient antibiotic separation	35
Mechanism of improvement in the strength of para-aramid paper by polyphenylene sulfide pulp	35
Cryogenic mechanical and hydrogen-barrier properties of carbon fiber composites for type V cryo-compressed hydrogen storage vessels	35
Facile fabrication of stretchable and multifunctional thermoelectric composite fabrics with strain-enhanced self-powered sensing performance	35
Preparation and performance characterization of intelligent woven composites embedded with distributed fiber optic sensors	35
Reversible Schiff-base chemistry enables thermosetting smart composites with versatile properties	35
Metal coordination interfacial enhancement effect: A strategy to fabricate low hygroscopic composite based on ammonium dinitramide (ADN) and polyether with enhanced mechanical properties	35
Revealing the deformation behavior of graphene nanosheets (GNSs) reinforced copper matrix laminated composites via Viscoplastic Self-Consistent (VPSC) modeling	35
Fabrication of highly thermal conductivity silver-coated carbon fiber/carbon/epoxy composites via CVD carbon deposition and electrochemical silver deposition method	35
Lightweight and flexible aramid/carbon fiber composite films for high-performance electromagnetic shielding	35
MOF-confined FeCoNi@carbon/Al2O3/silicone rubber composites with synergistic thermal conductivity and enhanced microwave absorption	34
DTAB-functionalized MXene nanofillers for enhancing dielectric and mechanical properties of TPU-based composites	34
Hollow RuO2 fibers with B-modification for enhanced water oxidation electrocatalysis in both acidic and alkaline media	34
Anisotropy characteristics of electrical conductivity and compressive strength of 3D carbon fiber/epoxy angle-interlock woven composites	34
Single effect of filler spatial distribution states on the thermal conductivity of epoxy composites and their heat conduction mechanisms	34
Editorial Board	34
3D printing of electrically conductive and degradable hydrogel for epidermal strain sensor	34
Single material FDM printed nacre-like composite structure with high fracture resistance: Utilizing interface as soft phase	34
Improvement of mechanical properties in carbon nanotube/Al–Cu–Mg composites through introducing bioinspired tree-ring structure	34
A high impact resistant coupling bionic asymmetric sandwich panel inspired by red-eared turtle shell and coelacanth fish	34
Aramid nanofiber/liquid metal/Gd2O3 flexible films with magnetic-conductive interfaces for electromagnetic interference shielding and Joule heating	33
Multi-stage, in-situ polymerisation for low-exotherm, liquid resin infusion of thick thermoplastic laminates at room temperature	33
Ultrasound-assisted vs traditional wet-chemical method to fabricate ZnO/ε-Zn(OH)2 nanocomposites	33
Highly dispersed graphene nanoplatelets in polypropylene composites by employing high-shear stress for enhanced dielectric properties and frequency-selective electromagnetic interference shielding cap	33
Principal stress-aligned continuous fiber routing in octet truss structures: Process and mechanical validation	33
Enhanced strength-ductility synergy in controllable bimodal grain structured composites via deep learning inspired by strain gradient theory	33
Editorial Board	33
Cu2P2O7 with great negative expansion properties simultaneously improves the flame retardant and mechanical properties of epoxy resin at cryogenics	33
Significance of microstructural defect-tolerant in the battle for survival: Mantis shrimp VS. Nacre	32
A smart epoxy coating based on Zn-imidazole metal-organic framework/graphene oxide nanocomposite for corrosion protection	32
Development of fluorescent basalt fiber with nanocomposite sizing for acid indication and anti-counterfeiting	32
The role of mechanical anchoring and reversible interactions in the self-healing and mechanical properties of rubber–silica composites	32
A β-phase crystal poly (vinylidene fluoride) incorporated epoxy-based composite coating with excellent oxygen barrier and anti-corrosion	32
A study on an asymmetric quasi-zero stiffness metamaterial based on trigonometric function spatially rotated curved beams	32
Machine learning-assisted dual-objective synergistic optimization for mechanical and electrical properties of CNTs/Cu composites	32
A facile strategy for constructing biomimetic continuous fiber reinforced biocomposites with spatial Bouligand structure	32
Ultraweakly low-dispersion epsilon-negative response of GR-CNT/PVDF ternary metacomposites	32
Engineering uniformly dispersed micro/nano aramid fiber networks via acoustic resonance mixing at the interlayers of basalt fiber composites: A significant leap in interlaminar toughness	32
Advanced microscopic characterisation of multi-scale high-resolution mechanical behaviour of a nacre-inspired composite	32
Effect of crystallinity on optical properties of PEEK prepreg tapes for laser-assisted automated fiber placement	31
Dynamic response of composite materials subjected to low velocity impacts in water: A numerical study	31
Microstructure and mechanical properties of B4C reinforced Invar 36 composites fabricated by laser powder bed fusion	31
Relating the failure modes transition to plasma treatment in adhesively bonded carbon fiber composite joints	31
Mechanical and damage behavior of short and continuous carbon fiber reinforced additively manufactured multiscale composite	31
Tough and soundproof PBAT/PLA composite foams with a multilayer oriented porous architecture	31
Influence of the interface layer on the fracture toughness of Ti2AlNb/Ti6Al4V layered metal composite	31
Evaluate the effect of graphene and milled glass fibre on the thermal, flame and dielectric properties of silicone elastomer filled with aluminium hydroxide	31
High content of spherical nanosilica filled epoxy resin master batch with low viscosity and superior thermomechanical performance	31
Lightweight, high-strength SiO2@Al2O3 composite yarns and textiles for high-temperature thermal insulation	31
Confined magnetic nickel nanoparticles in carbon microspheres with high-performance electromagnetic wave absorption in Ku-band	31
Robust and self-healing polydimethylsiloxane/carbon nanotube foams for electromagnetic interference shielding and thermal insulation	30
Stretchable, fast response and adhesive MXene-based hydrogels for wearable strain sensor	30
Glass fiber-based phenolic aerogel confined by honeycomb structure for excellent noise reduction	30
Antioxidant modified graphene oxide for robust and highly aging resistant rubber composites	30
Predicting the low-velocity impact failure of 3D woven composites based on a local homogenization modeling strategy	30
Composite anion-exchange-membranes: Construction of percolated structures and exponential improvement of ionic conductivity	30
Multifunctional thermal interface composites with enhanced thermal conductivity, EMI shielding capabilities, and mechanical performance	30
Study on FDM preparation and properties of carbon black/ nickel/ polylactic acid/ thermoplastic polyurethane electromagnetic wave absorbing composites	30
Exploring the potential of Te@Carbon–Rich hybrid nanocables/PDMS composites for Solar–Driven thermoelectric power generation	30
Evolution of microstructure within carbon fiber during pre-carbonization revealed by mean field theory	30
Interphase-engineering by atomic layer deposition of nacre-inspired alumina composites	30
Mechanical recycling and performance characterisation of insert-injection moulded homo-polypropylene single-polymer composites and foams	30
Interfacial crystallization behavior and properties of T1100-grade carbon fiber reinforced PEEK composites	29
Enhance thermal conductivity via constructing a low heat resistance interface with quaternized graphene	29
Graphene oxide embedded polyvinylidene fluoride nanofiber membranes with biomimetic polar adsorption function for mask cartridge materials	29
Fast-responsive polyimide/boron nitride composite aerogels with switchable thermal conductivity for on-demand thermal management	29
Waste silk selvedge/glass fiber reinforced strip-shaped composite: A critical assessment of twisting and dyeing of silk on mechanical properties	29
Analysis of bonding enhancement mechanism of micro-nano bionic texture on hybrid composites	29

Lightweight biodegradable porous poly(propylene carbonate)/carbon nanostructures nano/microcellular structures with enhanced foamability, good electromagnetic interference shielding, and low permanent	29
Design and fabrication of hierarchically porous polymer composites by powder bed fusion	28
Elastic, antiflaming phenolic aerogels for advanced thermal protection at extreme environments	28
In-situ reaction-induced multi-scale strengthening and toughening of heat-treatment-free nacre-like ZrB2/Al-Cu composites via ZrH2 addition	28
Decorating potassium titanate whiskers with holey graphene oxide via “face-to-face” covalent bonding toward enhanced reinforcement for polyethylene	28
Corrigendum to “Microstructure and mechanical properties of B4C reinforced Invar 36 composites fabricated by laser powder bed fusion” [Compos. Commun. 53 (January 2025) 102202]	28
Failure mechanism and heat treatment effect of 3D-printed bio-inspired helicoidal CF/PEEK composites	28
Sandwich-like Co/C composites derived from biomass carbon sheets coupled two-dimensional Co-MOF toward effective microwave absorption and anti-corrosion	28
An ultrathin Zn-BDC MOF nanosheets functionalized polyacrylonitrile composite separator with anion immobilization and Li+ redistribution for dendrite-free Li metal battery	28
Qualitative and quantitative evaluation of pre- and post-ablation carbon/carbon composites based on micro-computed tomography	28
Finite element analysis of the electro-mechanical behaviors of piezocomposite bimorph energy harvesters under static and dynamic loadings	28
Multifunctional basalt fiber reinforced polymer composites with in-situ damage self-sensing and temperature-sensitive behavior	27
Cation exchange chromatography membrane of Poly(ethylene vinyl alcohol) nanofiber/sulfonated polystyrene microsphere composite for lysozyme isolation	27
Composite fibrous membrane comprising PLA and PCL fibers for biomedical application	27
Achieving high heat resistance for phthalonitrile/boron blends through formation of protective phases derived from boron powder	27
Design, fabrication, and tribological performance of porous wood-inspired composites modified with functional h-BN and epoxy resin	27
Multifunctional MXene sediment-based composite film for electromagnetic interference shielding and joule heating	27
Equipment innovation in 3D printing of continuous fiber composites: A review	27
Investigation of nanoindentation mechanical properties for cellulose/PHA nanocomposite using molecular dynamics simulation	27
Multiscale coupling modification with amino silane-microcrystalline cellulose to enhance the interfacial bonding strength	27
Fabrication of metamaterial absorbers based on FCIP@C@MoS2 composites via digital light processing for broadband microwave absorption	27
Highly conductive lignin-derived carbon nanotube/copper yarns with excellent electrothermal performance	27
Self-assembly strategy to obtain phytic acid doped OBN hybrids for enhancing fire safety of epoxy resin with lower dielectric loss	27
Accelerating the design of flame-retardant polypropylene composites: An approach driven by explainable ensemble machine learning and Bayesian optimization	27
In-situ constructuring boron-modified phenolic aerogels with enhanced mechanical performance and flame retardancy	27
Sustainable epoxy composites with high thermal conductivity using poly(lipoic acid) modified liquid metal as crosslinkers	26
Synthesis of high-concentration and high-yield MXene nanosheets dispersion for conductive textiles	26
MOF@graphene nanocomposites for energy and environment applications	26
Modulation of interface and intermetallics by minor nano-Ti addition for enhancing mechanical properties and wear resistance in the short carbon fiber/Cu composites	26
The mix-mode fracture behaviour of aerospace composite joints co-cured by different forms of advanced thermoplastics	26
Understanding the evolution of mechanical and electrical properties of wet-spun PEDOT:PSS fibers with increasing carbon nanotube loading	26
Significantly anisotropic thermal conductivity improvement of PEEK composites with EMI shielding effectiveness	26
Designing a rigid–flexible hybrid interface using silanized fly ash and an epoxy resin sizing agent to enhance the mechanical properties of carbon fibers/epoxy resin composites	26
Multi-layer core-shell ATH: A novel approach to flame retardant and high-performance EVA composites	26
Fabrication of three-dimensional thermally conductive carbon fibers/carbon nanotubes network reinforce epoxy composites	26
Engineered cementitious composites (ECC) with manufactured sand (M-sand) for pavement applications	26
Damage monitoring and locating of COPV under low velocity impact using MXene sensor array	26
The engineering elastic constants of bio-inspired sandwich cores with wavy cylinders	26
Additive manufacturing of (TiB+TiC)/Ti6Al4V composites with tailored network reinforcement architecture	26
SiO2/SiC binary systems reinforced epoxy resins with high thermal conductivity and low CTE as underfill for 2.5D/3D electronic packaging	26
Balancing the "magic triangle" performance of tire rubber nanocomposites with novel low VOC silane coupling agents	26
Tensile behaviors of nanoporous phenolic composites reinforced by 3D needle-punched preforms with different weave patterns	26
Creating thermal conductive pathways in polymer matrix by directional assembly of synergistic fillers assisted by electric fields	26
Dual-functional eco-friendly liquid metal/boron nitride/silk fibroin composite film with outstanding thermal conductivity and electromagnetic shielding efficiency	26
Transparent and antibacterial air filters based on nanofiber/nets membrane	26
Multifunctional organic-inorganic basalt fiber/alginate fiber composite paper for flame retardancy and sound insulation	25
Flame-retardant performance of a novel lignin-based rigid polyurethane foam prepared from pulping black liquor	25
Design of strong fluorosilicone composites via thermodynamic and kinetic regulation of SiO2	25
Conjugated coordination polymer composite electrodes for efficient nitrogen reduction electrocatalysis	25
Low-cost coal tar pitch-derived Ni/C porous composites for high-efficiency electromagnetic wave absorption	25
Novel multifunctional DOPO-containing polyaniline for highly efficient flame retardance and static electricity control for rigid polyurethane foam	25
Three-dimensional N, S, P Co-doped carbon nanoflowers via self-assembly for high-efficient electromagnetic response	25
Polyimide/BaTiO3/NiNWs composites with enhanced dielectric properties	25
Optimization of PDMS -MWCNT nanocomposites for strong Ku-band absorption by integrating microwave simulations and genetic algorithm	25
Innovative hierarchical fiber membranes bioinspired by penguin feathers for exceptional thermal insulation	25
High-wet-strength hierarchically split cellulose fiber-based paper enabled by ultrafine polylactic acid and densification	25
Hydrophobic hydrogels as internal curing agent for concrete: The double benefit of super high water content and excellent anti-ion permeability	25
Editorial Board	25
Synergistic effect of in-situ TiB2 particle and Ti solute on the microstructure and mechanical properties of cast Al-Li-Cu-X matrix composite	25
Self-networking of graphene in epoxy resin based on thermal induced dynamic chemical network	25
Photothermal dual-cure 3D printing of mechanically robust microphase-separated hydrophobic ionic conductive elastomers	24
Highly stretchable, durable, and superfine fiber-shaped strain sensor with a porous core-sheath microstructure	24
Flexural and low velocity impact behaviour of hybrid metal wire mesh/carbon-fibre reinforced epoxy laminates	24
Superlight flame-retardant poly(aryl ether ketone)/polyurea nanocomposite foam with excellent solvent-resistance and shape memory performance	24
Bionic design and mechanical performance of spiderweb-inspired mesh fabrics	24
In-situ monitoring of carbon fiber/epoxy composite with FBG sensors under curing and thermal cycling conditions	24
Highly protective and functional strengthening strategies for 3D printed continuous carbon fiber reinforced polymer composites: Manufacturing and properties	24
Gradient layer-height design on 3D-printed continuous flax fiber reinforced composites for synergistic acoustic-structural performances	24
Low voltage tunability of PVDF-based nanocomposites by interface polarization induced by TiO2-coated BST core-shell nanoparticle	24
Nonlinear rheology of silicone rubber composites with tailored mechanical and dielectric properties	24
Strong, ductile and transparent biaxially oriented poly(lactic acid) with low content of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) by temperature-gradient stretching: The role of mesophase	24
The influence of key processing parameters on thermoset laminate curing	24
Optimized Y2O3-Al2O3 sol derived Cf/YAG composite with reduced preparation cycles and enhanced mechanical properties	24
Double macromolecules reinforced and toughened GO/epoxy resin composites: The critical role of a rigid-flexible interface	24
Synergistic effect of recycled PET and hyperbranched ionic liquids for toughening epoxy resin	24
Facile fabrication of large-area BN films for thermal management in flexible electronics	24
Interfacial anchoring and electronic coupling engineering of SnO2@Co-TDPAT coordination framework for enhanced lithium storage	24
Microcellular poly(phenylene sulfide)/carbon fiber composite foams prepared by melt-quenching foaming method	24
Enhancement of thermo-oxidative stability of polyimide composites by functionalized polyimide film surface modification	24
The effect of fatigue loading on the mechanical properties of additively manufactured continuous carbon fiber-reinforced composites	24
Concurrent enhancement of dimensional stability and thermal conductivity of thermoplastic polyamide 12T/Boron nitride composites by constructing oriented structure	23
Continuous-flow system for loading and refining metal-supported nanofibers toward scalable production	23
Improving thermal conductivity of phthalonitrile composite through constructing three-dimensional graphene networks and interfacial engineering	23
Enhancing mechanical properties and electrical conductivity of Cu-Ti-Si alloys through tailored thermomechanical processing	23
Efficient metallization based on nondestructive modification of catechol-tetraethylenepentamine composites and electroless deposition applied to polyethylene terephthalate for flexible electronics	23
High aspect ratio Na–Co-oxide ceramic filler composites with novel electrical and dielectric properties	23
A novel stretchable composite fiber for strain and magnetic sensors and actuators: The application of polystyrene-ethylene-butylene-styrene/carbon Nanotubes with encapsulated magnetorheological fluid	23
Editorial Board	23
Effects of multi-scale particles on the microstructure and mechanical properties of Mg-9Gd composites	23
SLA printing of POSS-containing, bio-based composites with low dielectric constant and shape-memory function	23
Failure in co-cured composite joints enhanced with J-272 film	23
Editorial Board	23
Simultaneously enhanced strength and ductility of copper composites by tailoring the intragranular carbonized polymer dots distribution	23
Probabilistic design optimisation of GFRP bolted joints under geometric uncertainties using 3D PDM and response surface methodology	23
Embedding magnetic 3D carbon skeleton in SiCN ceramics for high-performance electromagnetic shielding	23