Materials Today Energy

Article	Citations
Electrolyte/electrode co-optimization for high performance electrochromic devices	202
Over 14% unassisted water splitting driven by immersed perovskite/Si tandem photoanode with Ni-based catalysts	137
An ultra-thin and high-strength composite separator by high-temperature annealing for lithium-ion batteries	119
Recent progress in two-dimensional materials for generation of hydrogen peroxide by two-electron oxygen reduction reaction	116
Splitting charge injection for ultrahigh on/off ratio in a floating-metal-gated planar organic ferroelectric memory	105
FM1	95
Inorganic/organic composite binder with self-healing property for silicon anode in lithium-ion battery	86
Biomimetic photocatalysts for the transformation of CO2: design, properties, and mechanistic insights	72
Advances and challenges in developing protonic ceramic cells	68
Island-like random scattering layer for light extraction in organic light-emitting diodes with enhanced luminous efficiencies and angular spectral stability	68
FM1	66
Constructing high K+ concentration layer to expedite K+ intercalation in graphite: towards superior rate capability without trading off power density of potassium-ion batteries	65
Dithiols enhance the photovoltaic performance and stability of perovskite solar cells and modules by elongating the carrier lifetime	64
Front cover CO1	64
Assembly of Cu–In–Sn–Se quantum dot–sensitized TiO2 films for efficient quantum dot–sensitized solar cell application	61
Front cover CO1	59
FM1	59
Evolution of ternary LixSnyOz artificial cathode-electrolyte interphase (ACEI) through ALD: a surface strengthened NCM811 with enhanced electrochemical performances for Li-ion batteries	58
FM1	58
A hierarchical strategy for fabricating synergistic 3D network bio-based porous carbon and 0D niobium-based bimetallic oxides as counter electrodes for I- and Cu-mediated dye-sensitized solar cells wi	56
High-performance Sb2Si2Te6 thermoelectric device	56
Front cover CO1	55
Evolution and characteristics of defect clusters in H2+ irradiated Al-based Gd2O3–W composites used as spent fuel shielding materials	54
Bathocuproine, an old dog, new tricks for boosting the performance of perovskite solar cells	54
Multiparameter optimization of the thermoelectric module under the constant heat flux condition	54

Front cover CO1	54
Rapid and solvent-free mechanochemical synthesis of Na iron hexacyanoferrate for high-performance Na-ion batteries	53
Research advances in the light-driven conversion of CO2 to valuable chemicals by two-dimensional nanomaterials	51
Front cover CO1	51
FM1	48
Front cover CO1	46
Front cover CO1	46
A farewell and thank you to Professor Chun-Sing Lee	45
FM1	45
Modifying the buried interface with azodicarbonamide for high-efficiency MA-free perovskite solar cells	44
Vanadium-based cathode materials for rechargeable magnesium batteries	44
A small inorganic-organic material based on anthraquinone-decorated cyclophosphazene as cathode for aqueous electrolyte zinc-ion batteries	44
Benzene and NO photocatalytic-assisted removal using indoor lighting conditions	44
The surface modification of electrode materials using gel polymer electrolytes for anode-free lithium metal batteries (AFLMB)	44
NH2-MIL-101(Fe)@ZnIn2S4/ZnS heterojunction nanoreactors for efficient photocatalytic-Fenton performance via in-situ H2O2 evolution	44
Significantly improved high-temperature capacitive performance in polypropylene based on molecular semiconductor grafting	43
A self-assembly capsule-like solvation structure electrolyte for lithium metal batteries	42
Enhanced salt content and stabilized bilayer passivation interphase toward long-life and high-safety anode-free lithium battery	42
Simultaneous modification of Na-rich and Ca2+/Ni2+ dual-substitution boosting superior electrochemical performance of Na3V2(PO4)3	41
Pivotal role of water vapor–mediated defect engineering on SrTiO3 nanofiber toward efficient photocatalytic water splitting	41
Oxygen vacancy enriched and Cu single-atom contained covalent organic frameworks: A competitive photocatalyst to promote hydrogen evolution under visible light	41
Optimizing solar evaporation efficiency: integrating controllable water supply and efficient salt collection methods	41
Front cover CO1	41
High thermoelectric performance in Ag-doped Bi0.5Sb1.5Te3 nanocomposites synthesized via low-temperature liquid phase sintering	40
Polyacrylonitrile and aluminum metal dual functionalization interconnected network for superior lithium storage in silicon anode	40
Noble-metal-free chalcogenide nanotwins for efficient and stable photocatalytic pure water splitting by surface phosphorization and cocatalyst modification	39
Single and multilayer composite electrolytes for enhanced Li-ion conductivity with restricted polysulfide diffusion for lithium–sulfur battery	39
Flexible photo-charging power sources for wearable electronics	39
In-situ construction of a hybrid interfacial protective layer for highly stable Li metal anodes	39
Enhanced output voltage of thermoelectric generators driven by alternate triboelectric charges	39
Li1.4Al0.4Ti1.6(PO4)3 inorganic solid electrolyte for all-solid-state Li–CO2 batteries with MWCNT and Ru nanoparticle catalysts	38
Ambient ammonia production via selective electroreduction of nitrite by NiCu@TiO2 nanoribbon array	38
Isotonic separation enabled efficient low-grade heat conversion with thermal-responsive ionic liquids	38
The design strategy of Pt-based electrocatalysts: insights from mass transport of fuel cells	37
Boosting the capacity and life span of Zn-supply cathode in “rocking-chair” aqueous Zn-ion batteries by vanadium–manganese coupling strategy	36
Cooperative Co single atoms and Co2P nanoparticles as catalytic tandem for boosting redox kinetics in Li–S batteries	36
Improving the ohmic polarization of high-temperature proton exchange membrane fuel cells using crosslinked polybenzimidazole membranes containing acidophilic quaternary ammonium groups synthesized by	36
Microscale mismatches of electrically conductive and mechanically resilient regimes in Li-variant sulfide conductors	35
Oxygen vacancy rich δ-MnO2 nanosheets encapsulating single cobalt atoms-anchored carbon nanotubes for efficient oxygen evolution	35
In-situ construction of porous carbon substrate from sodium carboxymethyl cellulose boosting ultra-long lifespan for Na3V2(PO4)3 cathode material	35
Spatial configuration of interlayer maximizing suppression and conversion efficiency of lithium polysulfides for advanced lithium–sulfur batteries	35
Indium sulfide-sensitized 2D stannum indium sulfide nanosheet arrays promoting photoelectrochemical conversion efficiency in cathodic protection	35
Harnessing the synergy of ZrO2 and SiO2 dielectric micro-/nanoparticles in polymer-based photonic films for robust passive daytime radiative cooling	34
Achieving green and deep-blue perovskite LEDs by dimensional control using various ammonium bromides with CsPbBr-3	34
S-scheme heterojunction between donor-acceptor linear polymer and g-C3N4 via strengthened internal electric field for enhanced photocatalytic activity	33
Lithium garnet-cathode interfacial chemistry: inclusive insights and outlook toward practical solid-state lithium metal batteries	33
Phosphorus doping engineering induces the oxygen defect-rich metallic IrOx layer on the cobalt oxide surface for efficient and stable OER	33
Bioinspired liquid-repelling sealing films for flexible perovskite solar cells	33
Tailoring uniform and ordered grain boundaries in the solid electrolyte interphase for dendrite-free lithium metal batteries	32
A diamond gammavoltaic cell utilizing surface conductivity and its response to different photon interaction mechanisms	31

Unconventional third components for ternary organic solar cells	31
Novel thieno[3,2-b]thiophene-embedded small-molecule donors for highly efficient and photostable vacuum-processed organic photovoltaics	31
Bulky organic cations engineered lead-halide perovskites: a review on dimensionality and optoelectronic applications	31
A green blowing strategy toward massive synthesis of P, N, S-codoped carbon nanosheets incorporated with metal phosphides and the lithium storage application	31
Building a C-P bond to unlock the reversible and fast lithium storage performance of black phosphorus in all-solid-state lithium-ion batteries	31
Honeycomb-structured α-MnS@N-HC nanocomposite fabricated by sol-gel pyrolysis blowing method and its high-performance lithium storage	30
Cyanogel and its derived-materials: properties, preparation methods, and electrochemical applications	30
Selective absorber and emitter boost water evaporation and condensation toward water collection	30
Bifunctional catalytic activity of 2D boron monochalcogenides BX (X = S, Se, Te)	30
A highly efficient 4-terminal perovskite/silicon tandem solar cells using QIBC and IBC configurations in the top and bottom cells, respectively	30
Integrating a 3D porous carbon fiber network containing cobalt with artificial solid electrolyte interphase to consummate advanced electrodes for lithium–sulfur batteries	30
Pt–Ni alloy nanobead chains catalysts embedded in UiO-67 membrane for enhanced CO2 conversion to CO	30
Universal control strategy for anomalous ionic-electronic phenomenology in perovskite solar cells efficiency measurements	30
One-step hydrothermal synthesis of Co–Ni–S/Ni foam as an electrocatalyst for nitrogen reduction reaction	29
Development of RE-based and Ti-based multicomponent metal hydrides with comprehensive properties comparison for fuel cell hydrogen feeding system	29
Suppressing the irreversible phase transition from P2 to O2 in sodium-layered cathode via integrating P2- and O3-type structures	29
Highly hydrophobic silanized melamine foam for facile and uniform assembly of graphene nanoplatelet towards efficient light-to-thermal energy storage	29
Miniaturized in-plane π-type thermoelectric device composed of a II–IV semiconductor thin film prepared by microfabrication	29
Enhanced dual atomic Fe-Ni sites in N-doped carbon for bifunctional oxygen electrocatalysis	28
Lab-to-Fab development and long-term greenhouse test of stable flexible semitransparent organic photovoltaic module	28
Fullerene–non-fullerene hybrid acceptors for enhanced light absorption and electrical properties in organic solar cells	28
The role of nanostructuring strategies in PbTe on enhancing thermoelectric efficiency	28
The carbon challenge: Design, synthesis, and chemisorption behavior of solid sorbents in direct air capture of carbon dioxide	28
Metal exsolution engineering on perovskites for electrocatalysis: a perspective	28
Recent advances in InGaN nanowires for hydrogen production using photoelectrochemical water splitting	28
Luminescent properties and energy transfer of novel NIR K(Ga/Al)11O17:Cr3+,Yb3+ phosphors for solar cells	28
Inorganic cathode materials for potassium ion batteries	27
Multiphase-field modeling of disproportionation performance of ZrCo alloy during hydrogen absorption	27
Pyridine-substituted triazine as an acceptor for thermally activated delayed fluorescence emitters showing high efficiency and low roll-off in organic light-emitting diodes	27
A Lewis base and boundary passivation bifunctional additive for high performance lead-free layered-perovskite transistors and phototransistors	27
All-inorganic CsPbBr3 perovskite solar cells with enhanced efficiency by exploiting lone pair electrons via passivation of crystal boundary using carbon nitride (g-C3N4) nanosheets	27
Stimulated piezotronical decontamination using Cu2MgSnS4 modified BaTiO3	27
High-efficiency deep-blue emitter consisting of a chrysene core and optimized side groups	27
Solution-processed pseudo-vertical organic transistors based on TIPS-pentacene	27
Efficient passivation of surface defects by lewis base in lead-free tin-based perovskite solar cells	26
Improving the cyclability of solid polymer electrolyte with porous V2O5 nanotube filler	26
Low interfacial resistivity in CoSi2/ZrCoSb thermoelectric junctions	26
Regulating interlayer spacing with pillar and strain structures in Ti3C2 MXene layers by molecular welding for superior alkali metal ion storage	26
Deep eutectic solvents: viable sustainable electrolytes for supercapacitors	26
Sulfur confined MXene hosts enabling the use of carbonate-based electrolytes in alkali metal (Li/Na/K)-sulfur batteries	26
FM1	26
Tailored 2D conjugated polymers for pseudocapacitive proton storage	25
‘Two Birds with One Stone’ design for dendrite-free zinc-metal anodes: Three-dimensional highly conductive skeletons loaded with abundant zincophilic sites	25
A mini review of recent progress on halide perovskite memristor devices: materials science, challenges and applications	25
Maximizing the performance of single and multijunction MA and lead-free perovskite solar cell	25
Organic/inorganic metal halide perovskites for solar-driven water splitting: properties, mechanism, and design	25
A strategy to detect the effect of electrode defects on the electrical reliability in multilayer ceramic capacitors	25
In-situ construction of RuS2 nanocrystal-decorated amorphous NiS nanosheets for industrial-current-density water splitting	25
Converting spent carbon cathode (SCC) into SCC-2600@rGO for superior Li+ storage performance	25
Insight into the Co/Fe intrinsically assembled structure in cobalt-iron-layered double hydroxides on catalytic oxygen evolution reaction	25
Ultrathin two-dimensional photocatalysts for carbon dioxide reduction into fuels and chemicals	24
PPy film anchored on ZnCo2O4 nanowires facilitating efficient bifunctional electrocatalysis	24
Front cover CO1	24
Efficient ethanol electro-reforming on bimetallic anodes supported on adenine-based noble carbons: hydrogen production and value-added chemicals	24
How does the metal doping in mixed metal MOFs influence their photodynamics? A direct evidence for improved photocatalysts	24
Enhancing low-temperature lithium-ion battery performance under high-rate conditions with niobium oxides	24
Aqueous zinc–sodium hybrid battery based on high crystallinity sodium–iron hexacyanoferrate	24
Corrigendum to “High-performance perovskite solar cells using graphene quantum dot modified SnO2/ZnO photoelectrode” [Mater Today Energy 22 (2021) 100853]	24
Retraction notice to “A droplet-based electricity generator with high instantaneous power density, high efficiency, and reliable long-term stability” [Mater. Today Energy (2024) 101653]	23
Advanced garnet-polymer hybrid electrolytes for enhanced lithium metal battery performance	23
Functionalized methyl cellulose/LiClO4 composite as an environmentally friendly quasi-solid polymer electrolyte for solid-state electrochromic devices and cellulose-based supercapacitors	23
Continuous fabrication of triboelectric/piezoelectric hybrid yarns with high output for self-powered wearable sensors	23
Dilute Mn incorporation yielding prominent thermoelectric performances of Bi0.5Sb1.5Te3 based epitaxial films	23
Ion exchange in metal-organic frameworks and their derivatives: a facile strategy for enhanced water splitting	23
Machine learning study on the structural evolution of high-nickel layered cathodes	23
Oxygen-vacancy-enriched MgO/carbon composite as a highly efficient electrocatalyst for phenazine/dihydrophenazine redox reaction of aqueous phenazine redox flow battery	23
Lead-free solar cells and modules with antimony-based perovskite inspired materials for indoor photovoltaics	22
Laser ablation-controlled Au/Cu interfaces for modulating C1, C2, and C3+ chemistry in electrochemical CO2 reduction	22
Origin of hydrogen adsorption free energy variation in electrochemical hydrogen evolution in transition-metal dichalcogenides	22
Charge-transfer complexes and their applications in optoelectronic devices	22
Extremely large Seebeck coefficient of gelatin methacryloyl (GelMA)-based thermogalvanic cells by the dual effect of ion-induced crystallization and nanochannel control	22
Incorporating highly dispersed alumina in PEO-based solid electrolytes by vapor phase infiltration for all-solid-state lithium metal batteries	22
An overview on advances in design and development of materials for electrochemical generation of hydrogen and oxygen	22
Magnetic field-enabled ultrahigh-rate Zn metal anodes	22
Three-dimensional hierarchical porous hard carbon for excellent sodium/potassium storage and mechanism investigation	22
Regulating uniform nucleation of ZnS enables low-polarized and high stable aqueous Zn–S batteries	22
Highly dispersed face-centered cubic copper–cobalt alloys constructed by ultrafast carbothermal shock for efficient electrocatalytic nitrate-to-ammonia conversion	22
New reaction pathway induced by N-deficient conjugated polymer-supported bimetallic oxide quantum dot S-scheme heterojunction for benzyl alcohol oxidation in water	22
Structural composite solid electrolyte interphases on lithium metal anodes induced by inorganic/organic activators	21
Bifunctional phosphorus-doped NiMo oxide/Ni–Fe hydroxide composite for overall water electrolysis: optimized performance with exceptional stability	21

Polyimide dielectrics with cross-linked structure for high-temperature film capacitors	21
Electrospun Na3V2(PO4)3/carbon composite nanofibers as binder-free cathodes for advanced sodium-ion hybrid capacitors	21
A Bibendum-like structure of carbon nitride microtubes with regular arrangement nanotubes for photocatalytic protons reduction	21
Improved energy storage performance of polyimide nanocomposites by constructing the meso- and macroscopic interfaces	21
A review on semitransparent solar cells for agricultural application	21
Tailoring the d-band center of Ni on a dual-single-atom Ni–ZnNC catalyst for efficient H2O2 production	21
Recent advances in triboelectric nanogenerators: Mechanism, rational designing and applications	21
Aqueous proton batteries based on acetic acid solutions: mechanistic insights	21
Robust silver nanowire membrane with high porosity to construct stable Li metal anodes	21
Correlation between mechanical properties and ionic conductivity of polycrystalline sodium superionic conductors: A relative density-dominant relationship	21
Gradient Co/Zn bimetallic coordinated polymer-derived hierarchically porous carbon for boosted oxygen electrocatalysts of rechargeable Zn–air batteries	21
Phase change material coat for battery thermal management with integrated rapid heating and cooling functions from −40 °C to 50 °C	21
Reconstructing the solvation structure and solid-liquid interface enables dendrite-free zinc-ion batteries	21
Functionalized bacterial cellulose as a separator to address polysulfides shuttling in lithium–sulfur batteries	20
Successive electrochemical conversion reaction to understand the performance of aqueous Zn/MnO2 batteries with Mn2+ additive	20
Superfast crystalline powder synthetic strategy toward scale-up of perovskite solar cells	20
Improvement of high-temperature energy storage performance in polymer dielectrics by nanofillers with defect spinel structure	20
Surface engineering of Pt aerogels by metal phthalocyanine to enhance the electrocatalytic property for oxygen reduction reaction	20
In-situ polymerization induced phase separation to develop high-performance self-healable polymeric electrolytes for lithium metal battery	20
Improvement of density and electrochemical performance of garnet-type Li7La3Zr2O12 for solid-state lithium metal batteries enabled by W and Ta co-doping strategy	20
Well-defined metal-N4 sites coordinated defective carbon as efficient electrocatalysts for high performance lithium–sulfur batteries	20
Two-dimensional metallic pentadiamond as anode material for Li-/Na-/K-ion batteries with high performance	20
Protonated nickel 2-methylimidazole framework as an advanced electrode material for high-performance hybrid supercapacitor	20
Acoustic and mechanical metamaterials for energy harvesting and self-powered sensing applications	20
Mesoporous cobalt tungstate nanoparticles for efficient and stable visible-light-driven photocatalytic CO2 reduction	20
Electrochemically converting micro-sized industrial Si/FeSi2 to nano Si/FeSi for the high-performance lithium-ion battery anode	20
Solid redox equilibrium via d-band centers regulation in the MoS2/Ni3S2 heterojunction for efficient selective oxidation of 5-hydroxymethylfurfural	20
A simple approach to synthesis Cr2CTx MXene for efficient hydrogen evolution reaction	20
Recent advances and challenges in the development of advanced positive electrode materials for sustainable Na-ion batteries	19
Halide perovskite-based indoor photovoltaics: recent development and challenges	19
Boosting electroluminescence efficiency based on TADF emitters featuring multiple resonance segment integrated with a co-host exciplex	19
Achieving structural stability of LiCoO2 at high-voltage by gadolinium decoration	19
Recent progress in covalent organic frameworks as light-emitting materials	19
Interfacial coupling metallic MoS2 nanosheets with wrinkled Ti3C2TX MXene for reversible and stable sodium storage	19
High-performance tellurium-free thermoelectric module for moderate temperatures using α-MgAgSb/Mg2(Si,Sn)	19
Stabilized interface with high discharge voltage in lithium solid-state batteries with an organic cathode	19
NiFe-layered double hydroxide arrays for oxygen evolution reaction in fresh water and seawater	19
Ultrathin polymer electrolyte film prepared by in situ polymerization for lithium metal batteries	19
A high-entropy carbonate hydroxide as a high-efficient tri-functional electrocatalyst for OER/ORR/MOR	19
Engineering the micro-structure for reducing energy consumption in CO2 capture and catalytic conversion process	19
Boosting de-solvation via halloysite nanotubes-cellulose composite separator for dendrite-free zinc anodes	19
Unveiling the kinetics of oxygen evolution reaction in defect-engineered B/P-incorporated cobalt-oxide electrocatalysts	18
FM1	18
p-Block-metal bismuth embedded in N/P co-doped carbon nanorods for kinetics-enhanced rechargeable lithium-oxygen batteries	18
Nickel-doped cobalt phosphide with phosphorus-vacancy-abundant as an efficient catalyst for non-aqueous and quasi-solid-state Li–O2 batteries	18
High-performance zinc-ion batteries enabled by taurine-modulated inner Helmholtz plane	18
Simultaneously enhanced confinement and suppressed diffusion of lithium polysulfides via solution-processable porous organic cages for lithium–sulfur batteries	18
Indoor photovoltaic materials and devices for self-powered internet of things applications	18
Chemical and physical synergism between PAF-54 and SFPEEKK for effective shuttle effect inhibition of lithium–sulfur battery	18
Insight into the mechanism of nitrogen doping in MXenes with controllable surface chemistry	18
Sulfonated ionic liquids containing imidazolium ring and fluorine atoms for interface modification of HTL-free carbon-electroded CsPbI2Br perovskite solar cells	18
Transition metal tellurides for water electrolysis: Recent advances and perspectives	18
Prolonging rechargeable aluminum batteries life with flexible ceramic separator	18
Bi2Te3-based flexible thermoelectrics	18
Passive daytime radiative cooling: from mechanism to materials and applications	18
Achieving the dendrite-free zinc anode by constructing a Sn-C interfacial layer with zincophilic and conductive network	18
Recent progress of thin solid-state electrolytes and applications for solid-state lithium pouch cells	18
Realizing efficient and stable hybrid perovskite solar cells via passivation with Mn2+ ion-doped CsPbCl3 inorganic metal halide perovskite quantum dots	18
Brittle star-like nanoweb modified carbon cloth synthesized by self-templated hollow zeolitic imidazolate framework-8 for stable Li metal anodes	17
Enhancing the thermoelectric performance of solution-synthesized SnSe-based materials via incorporating Ti3C2T MXene	17
Effective CO2/N2 adsorptive separation by fluorinated CAG zeolitic imidazolate frameworks in humid environments	17
Designing vacancy-filled Heusler thermoelectric semiconductors by the Slater-Pauling rule	17
Bilayer-structured nanocomposites with ultrahigh energy density and large discharge efficiency at high temperature via balancing energy storage and thermal conductive layers	17
High thermoelectric performance in cubic inorganic halide perovskite material AgCdX3 (X = F and Cl) from first principles	17
Boosting low-temperature sodium/potassium storage performance of Bi via novel electrochemical milling process	17
Semitransparent organic solar cells based on all-low-bandgap donor and acceptor materials and their performance potential	17
Multifunctional nanolayered renewable carbon for electromagnetic interference and energy devices	17
Carbon nitride-based Z-scheme photocatalysts for non-sacrificial overall water splitting	17
Atomic-level tailoring ZnxCd1-xS photocatalysts: a paradigm for bridging structure-performance relationship toward solar chemical production	17
Direct recycling of degraded lithium-ion batteries of an electric vehicle using hydrothermal relithiation	17
High-performance and stress-controllable solid-solid phase change material for long-term thermal energy storage	17
Design heterostructure of NiS–NiS2 on NiFe layered double hydroxide with Mo doping for efficient overall water splitting	17
Hydrangea-like sulfide NiFe layered double hydroxides grown on an undulate nickel framework as bifunctional electrocatalysts for overall water splitting	17
Regeneration of well-performed anode material for sodium ion battery from waste lithium cobalt oxide via a facile sulfuration process	17
Influence of spin-orbit coupling on the optical and thermoelectric properties of lateral MoSe2-WSe2 heterostructure	17
Achieving ultra-high discharge energy density of dielectric polymer nanocomposites by in situ synthesis	17
Tuning selectivity among acetalization, pinacol coupling, and hydrogenation reactions of benzaldehyde by catalytic and photochemical pathways at room temperature	16
Symmetric sodium-ion batteries—materials, mechanisms, and prospects	16
Yolk-like Pt nanoparticles as cathode catalysts for low-Pt-loading proton-exchange membrane fuel cells	16
Synthesis of one-dimensional vanadium-doped CoS/Co9S8 heterojunctions as bifunctional electrocatalysts for zinc-air battery	16
Highly efficient and stable perovskite solar cells induced by novel bulk organosulfur ammonium	16
Performance evaluation of radiative cooling for commercial-scale warehouse	16
Flexible and wearable plasmonic-enabled organic/inorganic hybrid photothermoelectric generators	16
Hybrid graphene oxide/crumpled graphene film via subcooled boiling-induced self-assembly for highly efficient boiling heat transfer	16
Phase-engineering terraced structure of edge-rich α-Mo2C for efficient hydrogen evolution reaction	16
In situ nanocrystal seeding perovskite crystallization toward high-performance solar cells	16
Carbon layers on Pt/TiO2 induced dramatic promotion of photocatalytic H2 production: a combined experimental and computation study	15
A permselective protection layer assembled by two-dimensional organic vermiculite produces a highly stable lithium metal anode for lithium-sulfur batteries	15
Ion-compensation regime between electrolyte and cathode to prepare advanced lithium metal batteries	15
Strategic co-doping of ceria for improved oxidation kinetics in solar thermochemical fuel production	15
Energy science & technology at the Sungkyunkwan University (SKKU)	15
Unraveling the origin of facet-dependent photocatalytic H2O2 production over anatase TiO2	15
Unraveling the energy storage mechanism of biphase TiO2(B)/TiO2(A) slurry and its application in lithium slurry battery	15
Atomic layer deposition of piezoelectric materials: a timely review	15
Ultrafast laser-annealing of hydrogenated amorphous silicon in tunnel oxide passivated contacts for high-efficiency n-type silicon solar cells	15