OOIR: Observatory of International Research

Papers

(The median citation count of Journal of Physics-Materials is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)

Article	Citations
Understanding the influence of hydrogen on BCC iron grain boundaries using the kinetic activation relaxation technique (k-ART)	72
Humidity-controlled interactions and lifting of MoS₂ on SiO₂	69
Indirect magneto-ionic effect in FeSi₂/Si nanocomposite induced by electrochemical lithiation and delithiation	63
Roadmap on biomaterials for women’s health	63
In-sensor neuromorphic computing using perovskites and transition metal dichalcogenides	60
Applications of soft biomaterials based on organic and hybrid thin films deposited from the vapor phase	49
Roadmap on commercialization of metal halide perovskite photovoltaics	49
Ion correlations in quaternary ionic liquids electrolytes	45
An efficient numerical model for predicting residual stress and strain in parts manufactured by laser powder bed fusion	42
A d ⁸ anti-Hund’s singlet insulator in an infinite-layer nickelate	35
High-harmonic generation in spin and charge current pumping at ferromagnetic or antiferromagnetic resonance in the presence of spin–orbit coupling	34
Spin-orbit torques due to extrinsic spin-orbit scattering of topological insulator surface states: out-of-plane magnetization	34
Impact of hydrogenation on the stability and mechanical properties of amorphous boron nitride	32
Quantitative annular dark-field imaging in the scanning transmission electron microscope—a review	32
Cavity engineering of Hubbard U via phonon polaritons	31
Boron vacancy-driven thermodynamic stabilization and improved mechanical properties of AlB₂-type tantalum diborides as revealed by first-principles calculations	30
Highly conductive ionogel electrolytes based on N-ethyl-N-methylpyrrolidinium bis(fluorosulfonyl)imide FSI and NaFSI mixtures and their applications in sodium batteries	27
Polarons in spinless metals—a variational solution	26
A perspective on silicon-based polymer-derived ceramics materials for beyond lithium-ion batteries	24
Different healing characteristics of thiol-bearing molecules on CVD-grown MoS₂	23
Seeking borophene on Ni₃Al(111): an experimental characterization of boron segregation and oxidation	21
Magnetic couplings in edge-sharing high-spin d ⁷ compounds	21
Electromechanical strain response of phosphorene nanotubes	20
Exploring dielectric properties in atomistic models of amorphous boron nitride	19
Nonequilibrium hybrid multi-Weyl semimetal phases	19

Two-step ALD process for non-oxide ceramic deposition: the example of boron nitride	19
Towards control of the chirality sign at ultrathin metal films: Bi at 2Ni/Co	16
Hollow N,C-co-doped carbon-coated ZnS nanospheres derived from metal organic framework (ZIF-8) with improved lithium and sodium storage performance	15
Viscoelastic ordering in microfluidic devices: current knowledge, open questions and challenges	15
15 MeV proton damage in NiO/β-Ga₂O₃vertical rectifiers	15
Tuning the spintronic properties of graphene with atomically precise Au clusters	14
The effect of annealing temperature on Cu₂ZnGeSe₄ thin films and solar cells grown on transparent substrates	14
Topological edge states in dipolar zig-zag stripes	13
The sustainable materials roadmap	13
High entropy ceramics for applications in extreme environments	13
Integrating phase field and crystal plasticity finite element models for simulations of titanium alloy Ti-5553	13
Structural mode coupling in perovskite oxides using hypothesis-driven active learning	13
P3HT vs Spiro-OMeTAD as a hole transport layer for halide perovskite indoor photovoltaics and self-powering of motion sensors	13
Have mysterious topological valley currents been observed in graphene superlattices?	13
Patterning of organic semiconductor crystal arrays via microchannel-assisted inkjet printing for organic field-effect transistors	13
Low-voltage polymer transistors on hydrophobic dielectrics and surfaces	13
Molten glass-mediated conditional CVD growth of MoS₂ monolayers and effect of surface treatment on their optical properties	12
Tuning the topological band gap of bismuthene with silicon-based substrates	12
Droplet-based assembly of magnetic superballs	12
Deep learning modeling strategy for material science: from natural materials to metamaterials	12
Critical dopant concentrations govern integer and fractional charge-transfer phases in doped P3HT	12
Raman spectroscopy in layered hybrid organic-inorganic metal halide perovskites	12
Biomaterials of human source for 3D printing strategies	11
Carbon-based nanocomposites for sensing applications-a review	11
Corrigendum: Interfacial spin–orbit torques and magnetic anisotropy in WSe₂/permalloy bilayers (2021 J. Phys. Mater. 4 04LT01)	11
Correlation between optical phonon softening and superconducting	11
Zero momentum topological insulator in 2D semi-Dirac materials	10
Textured, lead-free piezoelectric ceramics with high figure of merit for energy harvesting	10
The impact of metal dopants on the properties of nZVI: a theoretical study	10
Burgeoning single atoms as new types of nanozymes and electrocatalysts for sensing, biomedicine and energy conversion	10
The role of metal-halide bond in the distortions and asymmetric non-covalent interactions in chiral hybrid perovskites	9
Unconventional ferrimagnetism and enhanced magnetic ordering temperature in monolayer CrCl₃ by introducing O impurities and Cl vacancies	9
Dependence of the polycarbonate mechanical performances on boron nitride flakes morphology	9
Constructing defect-rich Ni₉S₈/Fe₅Ni₄S₈ heterostructure nanoparticles for efficient oxygen evolution reaction and overall water splitting	9
Bubbles in 2D-land: how strain affects magnetism	9
Hexagonal boron nitride: a review on selfstanding crystals synthesis towards 2D nanosheets	9
Room-temperature tunnel magnetoresistance across biomolecular tunnel junctions based on ferritin	9
Mapping the magnetocaloric effect at the microscale on a ferromagnetic shape memory alloy with infrared thermography	9
The role of stacking on the electronic structure of MoSe₂ at small twist angles	9
Magnetic proximity effect in two-dimensional van der Waals heterostructure	9
How to grow single-crystalline and epitaxial NiTi films in (100)- and (111)-orientation	8
Strongly correlated superconductivity with long-range spatial fluctuations	8
Structure of polymer-capped gold nanorods binding to model phospholipid monolayers	8
Dispersive interactions between standard and Dirac materials and the role of dimensionality	8
Direct observation of the magnetic anisotropy of an Fe(II) spin crossover molecular thin film	8
An analytical-atomistic model for elastic behavior of silicon nanowires	8
Realizing linear synaptic plasticity in electric double layer-gated transistors for improved predictive accuracy and efficiency in neuromorphic computing	8
Interphases in the electrodes of potassium ion batteries	8
Electronic transport properties of spin-crossover polymer plus polyaniline composites with Fe₃O₄ nanoparticles	7
Inducing ferroptosis via nanomaterials: a novel and effective route in cancer therapy	7

Ultralow UV absorber content in 3D printed nanocomposites: maximizing printability and microwave absorption efficiency	7
How to identify and characterize strongly correlated topological semimetals	7
Bi₂WO₆ thin films grown by high-power InfraRed Nd:YAG pulsed laser deposition: a structural and spectroscopic study	7
A mesoscopic digital twin that bridges length and time scales for control of additively manufactured metal microstructures	7
Extreme in-plane thermal conductivity anisotropy in Rhenium-based dichalcogenides	7
Tailoring the properties of the 2D ferromagnet CrSBr by lanthanide doping	7
2021 Roadmap: electrocatalysts for green catalytic processes	7
Conductive metal-organic framework synthesis from metal nanoparticle precursors	6
Understanding the influence of hydrogen on BCC iron grain boundaries using the kinetic activation relaxation technique (k-ART)	6
Magnetotransport as a probe for the interplay between Sm and Fe magnetism in SmFeAsO	6
Anisotropic magnetic and transport properties of orthorhombic o-Pr₂Co₃Ge₅	6
Electronic properties of twisted multilayer graphene	6
Amorphization dependent recrystallisation of Sb₂Te₃	6
The case for digital twins in metal additive manufacturing	6
Mechanochemical synthesis of stable, quantum-confined CsPbBr₃ perovskite nanocrystals with blue-green emission and high PLQY	6
Surface segregation in high-entropy alloys from alchemical machine learning	6
Phonon-mediated renormalization of exciton energies and absorption spectra in polar semiconductors	6
Impact of topography on extraordinary magnetoresistive devices	6
Crystalline structures in foams: guided mechanical self-assembly of bubbles in fiber arrays	6
Tailoring the triboelectric output of poly-L-lactic acid nanotubes through control of polymer crystallinity	6
Defect modeling in semiconductors: the role of first principles simulations and machine learning	5
The effects of amino acid functionalisation on the optoelectronic properties and self-assembly of perylene bisimides	5
Phosphosulfide semiconductors for optoelectronics and solar energy conversion	5
Photonics design theory enhancing light extraction efficiency in quantum dot light emitting diodes	5
Sequencing one-dimensional Majorana materials for topological quantum computing	5
Neutron studies of Na-ion battery materials	5
Molecular simulation of the morphology and viscosity of aqueous micellar solutions of sodium lauryl ether sulfate (SLEnS)	5
Suppression of ferromagnetic correlations in hole-doped SrCo₂As₂	5
Modeling the electronic structure of organic materials: a solid-state physicist’s perspective	5
Transforming martensite in NiTi within nanoseconds	5
Quasiparticle energies and optical response of RbTiOPO₄ and KTiOAsO₄	5
Host-guest complexation in hybrid perovskite optoelectronics	5
New stable ultrawide bandgap As₂O₃ semiconductor materials	5
Halogenation effect on physicochemical properties of Ti₃C₂ MXenes	5
Insights about the effect of metal–organic framework hybridization with graphene-like materials	5
Topological and geometrical aspects of band theory	4
Synthesis and anisotropic magnetic properties of LiCrTe 2 single crystals with a triangular-lattice antiferromagnetic structure	4
Enhancing single photon emission through quasi-bound states in the continuum of monolithic hexagonal boron nitride metasurface	4
A bird’s eye perspective of the measurement of oxygen reduction reaction in gas diffusion electrode half-cell set-ups for Pt electrocatalysts in acidic media	4
Effects of bubble-induced strain on the magnetic properties of van der Waals ferromagnet CrBr₃	4
Solution-based fullerene-free route enables high-performance green-selective organic photodetectors	4
Orthorhombic distortion and rectangular skyrmion crystal in a centrosymmetric tetragonal host	4
Investigating the limits of superconductivity in UTe₂	4
Unusually large magnetic moment and tricritical behavior of the CMR compound NaCr₂O₄ revealed with high resolution neutron diffraction and μ+ SR	4
Renormalized phonon spectrum in the Su–Schrieffer–Heeger model	4
Recent progress of triboelectrification-induced electroluminescence: from fundaments to applications	4
Finding high-performance MOFs for effective SF₆/N₂ separation through high-throughput computational screening and machine learning	4
Roadmap on nanomedicine for the central nervous system	4
Magnetic-field-controlled growth of magnetoelastic phase domains in FeRh	4
Atomic-scale study of type-II Dirac semimetal PtTe₂ surface	4
Contact engineering for organic CMOS circuits	4
Nanophotosensitizers for cancer therapy: a promising technology?	4
Advance in twisted transition metal dichalcogenides: synthesis, characterization, and properties	4
Exciton-carrier coupling in a metal halide perovskite nanocrystal assembly probed by two-dimensional coherent spectroscopy	4
Sustainable paths to a circular economy: reusing aged Li-ion FePO₄ cathodes within Na-ion cells	3
Theory of spin–charge-coupled transport in proximitized graphene: an SO(5) algebraic approach	3
Local lattice distortions and electronic phases in perovskite manganite Pr_0.5Sr_0.5MnO₃	3
On the digital twin application and the role of artificial intelligence in additive manufacturing: a systematic review	3
Enhanced doping and structure relaxation of unsubstituted polythiophene through oxidative chemical vapor deposition and mild plasma treatment	3
Visualizing lone pairs and quantifying their bonding in solids with tight-binding Wannier models from first principles	3
Recent advances of single-atom electrocatalysts for hydrogen evolution reaction	3
Impact of topography on extraordinary magnetoresistive devices	3
2024 roadmap on 2D topological insulators	3
Spin wave excitations in low dimensional systems with large magnetic anisotropy	3
Modeling process–structure–property relationships in metal additive manufacturing: a review on physics-driven versus data-driven approaches	3
Fourier transformation based analysis routine for intermixed longitudinal and transversal hysteretic data for the example of a magnetic topological insulator	3
Valleytronics in two-dimensional magnetic materials	3
Applications of artificial intelligence and machine learning in metal additive manufacturing	3
Ceria nanoparticle theranostics: harnessing antioxidant properties in biomedicine and beyond	3