Journal of Vibration Engineering & Technologies

Article	Citations
Evaluation of Drift Demands in Vertically Irregular Steel Frames Under Mainshock–Aftershock Using Equivalent Single-Degree Freedom Methodology	95
On the Vibration of an Underwater Shell with Interior Sub-Structures: Modeling and Power Flow Analysis	57
Dynamic Analysis and Parameter Estimation of Bladed Rotor Bearing System	44
Hierarchical Control of Nonlinear Uncertain Active Suspension System Based on Extended State Observer	41
An Investigation of Fault Detection Techniques in Rolling Element Bearing	34
Correction to: Analytical Model for Thermoelastic Damping in In-Plane Vibrations of Circular Cross-Sectional Micro/Nanorings with Dual-Phase-Lag Heat Conduction	33
Non-Linear Vibrations of Composite Drill Strings–Wellbore Contact Considering Dynamics of Them at the Contact Zones	32
Prediction of Rotor Slot Size Variation Through Vibration Signal of Three Phase Induction Motor Using Machine Learning	31
A Review on the Role of Tunable Q-Factor Wavelet Transform in Fault Diagnosis of Rolling Element Bearings	27
A Highly Imbalanced Assembly Vibration Prediction of Aero-engine Using Feature Selection and Data Augmentation	27
A New Structural Damage Detection Method for Cantilever Beam Using Generalized Flexibility Quotient Difference Method	27
Seismic Response of Rocking Shallow Foundation in RC Framed Structure: A Parametric Study	27
Rotating Machines Health Monitoring Based on Time Reversal Method: Application to Bearings Defects Localisation	25
Static and Dynamic Analyses of Multi-Directional Functionally Graded Porous Nanoplates with Variable Nonlocal Parameter Using MITC3 + Element	25
Analysis of Vibration Suppression Performance of Nonlinear Energy Sink with Negative Stiffness	25
Fault Diagnosis of Wind Turbine Bearings Based on CNN and SSA–ELM	24
Study on the Semi-numerical and Semi-analytical Solutions of the Dynamics Equation of an Aero-engine Rotor System with ERSFD	24
Vibroacoustic Analysis in the Thermal Environment of PCLD Sandwich Beams with Frequency and Temperature Dependent Viscoelastic Cores	24
A Fault Diagnosis Approach Based on 2D-Vibration Imaging for Bearing Faults	23
Impacts of Complex Fields and Surface Energy on Forced and Free Vibrations of Rayleigh Nanobeams Under a Traveling Load	22
Numerical Analysis of Combustion Chamber from Vibro-acoustic Coupling Characteristics Point of View	21
Optimization of Train Diesel Engine for Maximizing Efficiency and Driving Quality Using Modified Parameterized Level-Set Method	21
Coexistence of Attractors and Its Control with Selection of a Desired Attractor in a Model of Extended Hindmarsh–Rose Neuron with Nonlinear Smooth Fitting Function: Microcontroller Implementation	21
Characterization of the Preloaded Hyperelastic Materials Subjected to Linear Vibrations	20
Editorial	19

Exact Closed-Form Solution for Nonlinear Stability Analysis of Porous Functionally Graded Pipes Conveying Fluid Under Various Boundary Conditions	19
Load Adaptivity of Seat Suspensions Equipped with Diamond-Shaped Structure Mem-Inerter	19
Special Issue from WMVC 2022	18
A Review of Vibration-Based Techniques for the Condition Assessment and Failure Detection of Transformers	18
H∞ Control-Based Optimization Design for Active and Passive Dynamic Vibration Absorber	18
Experimental Investigation and Diminution of Vibration and Acoustic Emissions in BLDC Motor through Efficient Energy Management Controller for Electric Vehicle	18
Optimum Tuned Inerter Damper for Base-Isolated Structures	18
Dynamic Characterization of a Gravity-Induced Bistable Magnetic Rolling Pendulum Harvester Under Parametric Excitation	17
Band Gap Properties of Acoustic Metamaterials with Interval Parameters	17
Nonlinear Electromechanical Modeling of Size-Dependent, Nonuniform Flexoelectric Nanoscale Harvesters	17
Bending and Free Vibrations Analysis of Sandwich Beams with Porous Functionally Graded Face Sheets and a Graphene Platelets-Reinforced Aluminum Core Using a New Quasi-3D Beam Theory	17
Framework for Identifying Bridge Damping Considering Support Effect Using Instrumented Three-Mass Vehicle	17
Theoretical Study and Simulation of Elliptical Vibrating Screen with Self-Synchronous Drive of Double Eccentric Wheels	17
A Semi-analytical Method for Vibro-Acoustic Properties of Functionally Graded Porous Piezoelectric Annular Plates with Cavity	16
Acoustic Cavity Boundary Impedance Identification Based on Hybrid Neural Network and Boundary-Smoothed Fourier Series Method	16
Propagation Characteristics of Elastic Waves in Wire Ropes of an Elevator	16
Finite Element Analysis of the Free Vibration Characteristics of Power–Law, Exponential, and Sigmoid Functionally Graded Plates Under Different Boundary Conditions and Material Grades	16
Theoretical, Numerical, and Experimental Study on the Sound Insulation Performance of Membrane-Type Acoustic Metamaterial Under General Constraints	16
A TLBO Optimized PID Controller for Controlling The Airway Pressure of An Artificial Respiratory System	16
Experimental Investigation and Prediction of Vibrational Characteristics in Diesel Engines with Diphenylamine Antioxidant and Ceria Nanoparticle Enriched Biodiesel	16
Enhancing Damage Detection Using Reptile Search Algorithm-Optimized Neural Network and Frequency Response Function	16
The Implementation of an Adaptive Electromagnetic Active Vibration Absorber for Multi-frequency Broadband Vibration Control	16
Influence of Nanodiamonds on Mechanical, Acoustic, Vibration Damping and Flame Retardancy in Jute Fiber-Reinforced Epoxy Composite Panels Used in Indoor Applications	15
Bandwidth Narrowing Effect in Higher-Order Frequency Bands of Microperforated Panel Absorbers: Analysis and Suppression Strategies	15
Vibration Suppression of a 19-DOF Wind Turbine Based on a Novel Semi-active Negative Stiffness Spring	15
Elastic Wave Modulation of Metamaterial Beams in Bidirectional Asymmetric Acoustic Black Holes: Finite Element Method and Experiment	15
Thermo-Elastic Vibration Analysis of Acoustic Liners Using Polymer-Metal Nanocomposites: Prediction and Optimization of Hybrid Deep Neural Network and Cuckoo Search Algorithm	15
Vibration of Ring Gears with Thin Rims Supported by Distributed Bolts	15
Extremely Low-Speed Bearing Fault Diagnosis Based on Raw Signal Fusion and DE-1D-CNN Network	14
Maintenance Standard for Manholes and Surrounding Pavement Based on Driving Comfort Evaluation	14
Experimental Research on a Multi-modal Active Damping System for Transonic Wind-Tunnel Tests	14
Application of Metastructures for Targeted Low-Frequency Vibration Suppression in Plates	14
A Piezoelectric Energy Harvester Designed for Vibration Energy Scavenging and Shaft Fault Diagnosing-Based Applications	14
Acoustic Response of Sigmoid Functionally Graded Thin Plates: A Parametric Investigation	14
Porosity and Deformable Boundary Effects on the Dynamic of Nonlocal Sigmoid and Power-Law FG Nanobeams Embedded in the Winkler–Pasternak Medium	14
Model Order Reduction and Nonlinear Dynamic Analysis of the Folding Fin with Freeplay Nonlinearity	13
Noise Eliminated Ensemble Empirical Mode Decomposition for Bearing Fault Diagnosis	13
Diffraction of plane P waves by a circular unlined tunnel in an unsaturated poroelastic half-space	13
Effect of Piezoelectric Interphase Thickness on Nonlinear Behavior of Multiphase Magneto–Electro–Elastic Fibrous Composite Plate	13
Back-Stepping Sliding Mode Controller Design for Vehicle Seat Vibration Suppression Using Magnetorheological Damper	13
Analysis of Planar Motion for Curved Pipe Conveying Fluid with Different Types of Initial Configuration	13
On Stochastic Design of Negative Stiffness Integrated Tuned Mass Damper (NS-TMD)	13
Reduced Order Models and Coupling Characteristics of the Mistuned Blade-Disk-Shaft Integration Rotor	13
Vortex- and Wake-Induced Vibrations of a Circular Cylinder Placed in the Proximity of Two Fixed Cylinders	13
Finite Element Modeling and Experimental Validation of Tool Wear in Hot-Ultrasonic-Assisted Turning of Nimonic 90	12
Design and Testing of a Novel Two-Axial Flexure-Based Vibration Stage	12
Steady-State and Bifurcation Analysis of Nonlinear Jumps in a Non-ideal Rotor System Using Magnetorheological Fluid Dampers	12
Singular Function Model of Concentrated Mass-Cable Composite Structures	12
Hybrid DE-Jaya Optimized Variable Step-Size and Tap-Length Adaptive Filtering Control Algorithm Active Micro-vibration Control with Piezoelectric Stack Actuator	12
Longitudinal Vibration Analysis of a Stepped Nonlocal Rod Embedded in Several Elastic Media	12

Artificial Intelligence-Driven Active Tuned Mass Damper for Enhanced Seismic Resilience of Shear Frame Smart Structures	12
Controllability of Transition Jumps of Coupled Structures	12
Accuracy and Efficiency Analysis of the Beam Elements for Nonlinear Large Deformation	11
Vibrations of Cylindrical Sandwich Shell with Fused Deposition Processed Honeycomb Core and Carbon Nanotubes Reinforced Composite Faces Sheets	11
Study on Mechanical Vibration Control of Limit Cycle Oscillations in the Van der Pol Oscillator by means of Nonlinear Energy Sink	11
Mechanical Model Analysis and Experimental Research on a Novel Tuned Liquid Inerter Damper	11
Realistic Modelling for Analysis of Train-Structure and Ballasted-Track Interaction for High-Speed Trains	11
Dynamic Model of Functionally Graded Flexible Beams Based on Neutral Axis and Setting Position	11
Research on Nonlinear Dynamic Characteristics of Spiral Bevel Gear with Time-Varying Thermal Deformation and Time-Varying Friction	11
On the Characteristics of a Large Support Capacity Quasi-Zero-Stiffness Isolator with Geometric Nonlinear Damping	11
Parametric Vibration Model and Response Analysis of Cable–Beam Coupling Under Random Excitation	11
Fault Diagnosis Method and Application Based on Multi-scale Neural Network and Data Enhancement for Strong Noise	11
Vibration Control and Seismic Damages Reduction for Structural Buildings Based on Optimal Fractional-Order Controller and a Graphical User Interface Development	11
Multiscroll Chaos and Extreme Multistability of Memristive Chaotic System with Application to Image Encryption	11
Lyapunov-Based Boundary Control of Strain Gradient Microplates	11
Vibration Isolation Performance Enhancement Using Hybrid Nonlinear Inerter and Negative Stiffness Based on Linkage Mechanism	11
Active Balancing Disk of Rotor-Bearing Systems Based on Vibration Amplitude Data: MATLAB-Aided Wireless Control	11
Piezoelectric Energy Harvesting by Utilizing Angular Speed Variation in High-Speed Rotating Beams	11
Surrogate models for dynamic load factor and ductility ratio in blast response determination	11
L-Moments Ratio-Based Condition Indicators for Diagnosis of Fault in a Worm Gearbox	11
Transient Behaviour and Impact Induced First-Ply Failure of Delaminated Composite Conical Shells	11
Modeling and Optimization of Electromagnetic Conversion Coupling Coefficient Based on Maxwell’s Magnetic Field Theory	10
Structure-Preserving Analysis on Flexible Hub-Beam with Hollow Tapered Cross Section	10
Detection of Damage in Bolted Steel Structures Using Vibration Signature Analysis	10
Reduced-Order Modeling for the Coupling Vibration Analysis of Bladed Rotors Supported by Journal Bearings	10
Nonlinear Dynamics Analysis of Gear Transmission System Based on Tooth Surface Microtopography	10
Study on the Propagation Law of Explosion Shock Waves in Closed Variable-Section Tube Under High-Pressure Environment	10
Experimentation and Damping Performance Analysis of a MR Damper for Resonance Control in a Quarter Car Suspension System	10
Fault Diagnosis of Rolling Bearings Based on the Improved Symmetrized Dot Pattern Enhanced Convolutional Neural Networks	10
Development and Application of Vibration Diagnostics for Condition Monitoring in High Heat Flux Test Facility at IPR	10
Research on Dynamics and Performance of Composite Impact Acceleration Tool	10
Tuning Fork Seismic Metamaterial for Low-Frequency Surface Wave Attenuation with Locally Resonant Band Gaps	10
Efficiency of Tuned Liquid Dampers in Mitigating Vibrations of Structures with Mass Eccentricity	10
Vibration Analysis of Single-Link Flexible Manipulator in an Uncertain Environment	10
Dynamic Modeling and Simulation of a Folding-Link Flexible Manipulator Based on the Bezier Interpolation Method	10
A Virtual Sensing Active Noise Control System Based on a Functional Link Neural Network for an Aircraft Seat Headrest	10
Self-Organizing Maps and VMD for Accurate Diagnosis of Bearing Defects	10
Numerical Investigation of Broad Mid-Frequency Flexural Bandgap in Composite Sandwich Structures with Periodic Hollow-Shaped Core Geometry	9
Seismic Vulnerability Assessment of Indian Code Compliant RC Frame Buildings	9
Effect of Thermal and High Static Low Dynamics Stiffness Isolator with the Auxiliary System on a Beam Subjected to Traffic Loads	9
Reliability-Based Safety Amelioration of Bridge Corridors Considering Intersections Under Earthquake Sequence	9
Nonlinear Oscillations of a Transversally Excited Non-shallow Conoidal Shell via Finite Element Analysis	9
Effect of Cut-Out Location on the Dynamic Behaviour of Plate Frame Structures	9
Smart Automatic Modal Hammer: Predictor–Corrector Approach for Accurate Excitation of Dynamical Systems	9
Theoretical Formulation of Amplifier–Vehicle–Bridge System Based on Sophisticated Vehicle Model	9
A Novel Piecewise Symmetric Two-Dimensional Tri-stable Stochastic Resonance System for Bearing Fault Detection	9
Free Transverse Vibration of General Power-Law NAFG Beams with Tip Masses	9
Instability Mechanism of Marine Propulsion System with Double-Cylinder Turbines Considering the Effects of System Parameters: Symmetrical Layout and Unsymmetrical Load	9
Aeroacoustic Design Optimization and Experimental Investigation of Sawtooth Trailing-Edges for Maximized Noise Reduction	9
Effect of Inclined Mechanical Load on a Thermo-Diffusive Half-Space with Microtemperatures and Microconcentrations	9
Research on the Free Vibration of the Arch Bridge During Cable Hoisting or Rotation Erection Using an Analytical Modeling	9
Defect Characterization in a 1D Spring Mass System Using the Laplace and Z-Transforms	9
Fuzzy Diagnostic Strategy Implementation for Gas Turbine Vibrations Faults Detection: Towards a Characterization of Symptom–fault Correlations	9
The Role of Transient Vibration and Skull Properties on Concussion: A Computational Analysis	9
Investigation of a Continuum Shear Lag Model as an Indicator for the Damage Detection in Piezo-Elasto Dynamic Structure	9
Piezoceramic Stick–Slip Actuator with Nanometer Displacement Resolution for Liquid Bridge Stretching	9
Vibration of Cracked FGM Beam with Piezoelectric Layer Under Moving Load	9
The Characteristic Analysis and Application of a Novel Time-Delay Feedback Piecewise Tri-stable Stochastic Resonance System	9
Lifetime Assessment of a Low-Pressure Steam Turbine Blade	9
Operational State Recognition of Continuous Worm Gear Grinding Process Based on Wavelet Packet Energy Ratio and Double-Layer SVM Classifier	9
Effect of Particle Friction Coefficient on Vibration Reduction in Gear Transmission	9
Bridge Damage Detection with Support Vector Machine in Accelerometer-Based Wireless Sensor Network	9
Nonlinear Modeling and Analysis of Vehicle Vibrations Crossing Over a Speed Bump	8
Identification in a Magnetically Levitated Rigid Rotor System Integrated with Misaligned Sensors and Active Magnetic Bearings	8
Behavior of Base-Isolated Integral Bridge Under Multi-component Earthquake	8
Development of Low-Cost Optimal Magneto-rheological Damper for Automotive Application	8
Research on the Dynamic Cause of Rail Corrugation in the Braking Section of High-Speed Railways Under Multiple Vibration Inducements	8
Effect of Vibrations on Rotor Model Assembly Due to Modifications in Coupling Design	8
Dynamic Responses and Energy Absorption of Mechanical Metamaterials Composed of Buckling Beams	8
Adhesively Bonded Tublar Single Lap Joint Effects on the Free Vibration Analysis of Laminated Composite Circular–Cylindrical Shells	8
Refined Composite Multiscale Range Entropy and Pairwise Feature Proximity-Based Fault Detection Method of Rotating Machinery	8
Electromechanical Modelling and Multi Faults Diagnosis of Straight Bevel Gear Pair with Experimental Validation	8
Seismic Waves Comparative Analysis of Thermobaric Explosive and TNT Explosive in Shallow Underground Chemical Explosion	8
Naïve Bayes and Bayes Net Classifier for Fault Diagnosis of End Mill Tool Using Wavelet Analysis: A Comparative Study	8
Correction: Modeling and Simulation of Macroscopic Friction Coefficient of Brake Pair Considering Particle Flows and Interface Parameters	8
Vibration Suppression and Energy Harvesting of Two Degree of Freedom Main Structure Coupled with a Bistable Nonlinear Energy Sink Under Transient Excitation	8
High-Energy Orbit Harvesting with Torsionally Coupled Mistuned Pendulums	8
Temperature and Vibration Condition Monitoring of a Polymer Hybrid Ball Bearing	8
Stockwell Transform of Quadrature Stator Current-Based Fault Assessment in Induction Machine at Different Load Condition	8
Benefits of OKID in system realization with low amount of samples	8

Natural Vibration of Axially Graded Multi-cracked Nanobeams in Thermal Environment Using Power Series	8
Modeling and Theoretical Investigation of Nonlinear Torsional Characteristics for Double-Helical Star Gearing System in GTF Gearbox	8
Absolute Nodal Coordinate Formulation Based on Moving Least Square Method for Plane Flexible Beam	8
Vibration Control Using a Positive Position Feedback-based Predictive Controller Applied to a One-Bay Three-Story Scaled Shear Frame	8
Effect of Bi2O3 Nanoparticles Addition to Lubricating Oil on the Dynamic Behavior of Rotor-Bearing Systems	8
Low-frequency Noise Reduction Mechanism and Acoustic Characteristics of the Dipole Surface Source Structure	8
Vibration Analysis and Optimization of a Tracked Armored Vehicle	8
Optimization Design of Drum Brake Stability with Mixed Model of Random and Interval Variables	8
Thermoelastic Damping Analysis to Nano-resonators Utilizing the Modified Couple Stress Theory and the Memory-Dependent Heat Conduction Model	8
Analysis Methods of Irregular High-Rise Buildings Subjected to Seismic Loads	8
Theoretical Study of S-Wave Passing Through an Elastic Wave Impeding Block in the Unsaturated Soil	8
Modelling of Love Waves in a Heterogeneous Medium Demarcated by Functionally Graded Piezoelectric Layer and Size-Dependent Micropolar Half-Space	8
Mechanical, Free Vibration and Modal Damping Behaviour of Treated Rice Bran Green Composite for 3D Printing Application Using RSM and Design of Experiment Method	8
Probing Multimode Thermoelastic Damping in MEMS Beam Mass Structure	7
Multiple Sloped Wall Tuned Liquid Dampers for Vibration Control of Structure Excited by Near and Far-Fault Earthquakes	7
Influence of Geometric Parameters on the Dynamic Performance of Spiral Bevel Gear	7
Improvement in Machining Stability of Thin-Walled Blades by Tension	7
Diagnosis of Mechanical System Failures Based on the Application of Cyclostationarity	7
Experimental Study to Analyse the Effect of Force-Frequency Mutual Dependency on the Performance of Vertical Contact-Separation Triboelectric Energy Harvester	7
Complex Modal Analysis of a Resilient Supported Conveyor Belt: Enhancement of Numerical Stability by Reduced Complex Transfer Matrix Method	7
Damage Detection in Steel Beams Using Generalized Flexibility Quotient Difference Based Damage Index and Artificial Neural Network	7
Analysis of Radial Electromagnetic Force and Vibration Characteristics of Permanent-Magnet-Based Synchronous Motor for Vibration Management	7
Prediction and Control Method of Long-Term Vehicle-Induced Settlement of High-Speed Railway Tunnel in Diatomite Stratum	7
Free Vibration Response of Porous FGM Plates Using Finite Element Analysis in Thermal Environment	7
Site-Specific Amplitude-Distance Laws, Wave Velocities, Damping, and Transfer Functions of the Soil from Hammer Impacts and Application to Railway-Induced Ground Vibration: Similarities and Mid-Freque	7
Stress Model Analysis and Effectiveness of an Ultrasonic Guided Wave De-icing Technique	7
Fatigue failure analysis of rotating steel beams by classical approach followed by characterization of the fatigue testing machine	7
Method of Polynomial Vectors for Solving Nonlinear Vibrations with Multiple Time Scales	7
Dynamic Performance Evaluation of Variable-Speed Wind Turbine Transmission System in Non-Stationary Conditions	7
Effect of Compressed Air Cooling on Tool Wear During Ultrasonic-Vibration-Laser Assisted Turning of Aluminium Alloy	7
Dynamic Modelling and Experimental Testing of a Dynamic Directional Amplification Mechanism for Vibration Mitigation	7
Experimental Study on New Tool Holder Design to Reduce Vibration in Turning Operations	7
Turbine Inlet Valve’s Self-Excited Vibrations Risk the Safe Operation of Hydropower Plants	7
Damage Analysis in Flax/Elium Composite Using Linear and Nonlinear Resonance Techniques	7
Design and Analysis of Vibration Fixture for Aerospace Heat Exchanger	7
Estimation of Torque Variation due to Torsional Vibration in a Rotating System Using a Kalman Filter-Based Approach	7
Vibration Control in a Co-rotating Twin-Spool Rotor System Under Base Excitation and Mass Unbalance Using Active Magnetic Bearings	7
Uncertain Eigenvalue Analysis for Graded Porous and Sandwich Arches by Employing Perturbation-Based Stochastic Finite Element Approach	7
Health Status Identification and Material Damping Determination of Plants via Non-contact Measurement and Mechanical Modelling	7
Orbit-Attitude-Rotating Coupling Dynamics of Space Manipulator Assembled with Camera	7
Aperiodic Two-Dimensional Acoustic Black Holes for Broadband Vibration Attenuation in a Strip	7
Filtered Regression Estimation-Based Signal Compensation for Swinging Up Rotary Inverted Pendulum: Theoretical Results and Experimental Validations	7
Study on the Spatial System Dynamics of Long-Span Arch Bridge Interacting with Vehicles Subjected to Multiple Vehicle Loads	7
Natural Vibrations of Geometrically Imperfect GRC Beam with Varying Boundaries in Contact with Fluid	7
Aerothermoelastic Analysis of Porous 2D Curved Panels	7
Free Vibration of a Timoshenko Beam with Arbitrary Nonuniformities, Discontinuities and Constraints	7
Dynamic Modeling and Analysis of Centrifugally Stiffened Proportionally Damped Timoshenko Beam	7
Effect of Self-Resetting Ball Absorber on the Mechanical Properties of the Fabricated Structure and Its Influencing Factors: Theory and Experimentation	7
Firing Process Modeling of a Soft Recoil Gun Based on Interval Uncertainty Parameter Identification	7
On the Importance of Modeling Ball Raceway Impact Force for Evaluating the Plastic Deformation at Spall Edge of Rolling Element Bearing: Theoretical Modeling	7
A Wind Turbine Bearing Fault Detection Method Based on Improved CEEMDAN and AR-MEDA	7
Various Vibration Harvesting Techniques for Rotating System: An Overview	6
Bending Natural Frequency Analysis on the FML Plates Made up of Different Nano Fillers Using Experimental and Numerical Means	6
Damage Detection in Laminated Composite Beams Reinforced with Nano-particles Using Covariance of Vibration Mode Shape and Wavelet Transform	6
An Integrated Method Based on Sparrow Search Algorithm Improved Variational Mode Decomposition and Support Vector Machine for Fault Diagnosis of Rolling Bearing	6
Study on Vibro-Acoustic Performances of Coupled Orthogonally Stiffened Cylindrical Shell-Bulkheads System Using Wavenumber Analysis Method	6
Comparison of ML Algorithms and Neural Networks on Fault Diagnosis of a Worm Gear	6
Porosity Investigations on Dynamic Responses of FG Plates via a Modified Quasi-3D Shear Deformation Theory	6
Modelling and Application of Bucking Restrained Braces for Performance-Based Earthquake Engineering Frameworks	6
Free Vibration Analysis of Anti-Symmetric Angle-Ply Laminated Shells Using a Modified Hyperbolic Shear Deformation Theory	6
Coupled Dynamic Research and Optimization Between Integrated Powertrain System and Electric Commercial Vehicles	6
Effect of Folding Process on the More Accurate Vibrational Characteristics of G-ori Composite Shell	6
Compound Bursting Behaviors in the Parametrically Amplified Mathieu–Duffing Nonlinear System	6
Free Vibration Frequency Prediction to Design Optimum Adhesively Bonded Composite Double Lap Joint	6
Diagnosis and Classification of Diesel Engine Components Faults Using Time–Frequency and Machine Learning Approach	6
Nonlinear Dynamics Simulation Analysis of Rotor-Disc-Bearing System with Transverse Crack	6
Static bending and vibration analysis of piezoelectric semiconductor beams considering surface effects	6
Vibration Control of Smooth and Discontinuous Oscillator via Negative Derivative Feedback	6
Baseline-Free Damage Identification in Plate Containing a Circular Hole with Edge Cracks Based on Lamb Wave Scattering	6
Vibration Response Analysis of Rammer Construction on Uneven Unsaturated Soil Sites	6
A Semi-active Vibration Isolation System with Adaptive Anti-resonance Control for Enhanced Performance	6
Energy Harvesting Performance of Acoustic Energy Harvesters Consisting of Flexoelectric Plates and Defect-State Phononic Crystals	6
Ball Screw Preload Loss Detection with Features Extracted from Vibration Holospectra	6
Correction: Research on Control Strategy and Comprehensive Performance Evaluation of Semi-active Suspension Based on CDC Shock Absorber	6
A Comprehensive Investigation on the Effect of Graphene Nanoplatelets Characteristics on the Natural Frequency Responses of Shear Deformable Cylindrical Shell	6
A Comparative Study on Tree-Based Classifiers for Condition Monitoring of Face Milling Tool	6
A Data-Driven Approach to Structural Health Monitoring of Bridge Structures Based on the Discrete Model and FFT-Deep Learning	6
Longitudinal Forced Vibration Analysis of a Single-Walled Carbon Nanotube Embedded in an Elastic Medium	6
Static, Buckling and Vibration Response Analysis of Three-Layered Functionally Graded Piezoelectric Plate under Thermo-Electric Mechanical Environment	6
Optimal Design of Tuned Liquid Column Damper for Wind-induced Response Control of Benchmark Tall Building	6
Influence of One-Way ANOVA and Kruskal–Wallis Based Feature Ranking on the Performance of ML Classifiers for Bearing Fault Diagnosis	6
A Two-Part Analytical Solution for the Shock Response Spectrum with Coulomb Damping	6
Evaluation of Compressive and Tensile Stress–Strain Parameters of Concrete Damage Plasticity Model for Concrete Slabs Under Impact load	6
Effectiveness of Nonlinear Energy Sinks in the Suppression of Stall-Induced Aeroelastic Instabilities	6
Rotating Exponentially Graded Variable-thickness Annular Piezoelectric Porous Disks	6
Unravelling the Dynamics of Misalignment-Induced Vibrations in Two Jaw Elastomeric Couplings for Enhanced Industrial Reliability: A Comprehensive Analysis of Dynamics and Diagnostic Approaches	6
Electromagnetic Actuator Based on Perpendicularly Magnetized Magnetic Ring Array for Large-Scale Precision Vibration Isolation	6
Axial Vibration of a Viscoelastic FG Nanobeam with Arbitrary Boundary Conditions	6
Parametric Vibration of Viscoelastic Moving Films with Time-Variant Tension Under Thermal Loading	6
Active Vibration Isolation Platform with Distributed Feed-Forward Feedback Hybrid Control	6
Analysis of Dynamic Response of Ballasted Rail Track Under a Moving Load to Determine the Critical Speed of Motion	6
Dispersion and Attenuation Characteristics of Shear Wave Due to an Impulsive Source in a Piezo-electro-magnetic Composite with Viscoelastic Coating	6
Highly Accurate Gear Fault Diagnosis Based on Support Vector Machine	6
An Origami-Inspired Quasi-zero Stiffness Structure for Low-Frequency Vibration Isolation	6
Broadband Low-Frequency Acoustic Energy Harvesting Amplified by Sonic Crystal Metamaterial with Double Defects	6