Polymer-Plastics Technology and Materials

Article	Citations
Creation of synergistic effect among raw materials in biodegradable films with novel, designed ZnO particles	48
Polymeric materials in single photon emission: a futuristic review	48
Wrapped quantum Dot/PBDT-TIPS-DTNT-DT nanostructures in high-level perovskite photovoltaics	46
The Simultaneous Effect of HA and rGO on the Physical and Mechanical Behavior of TPU Foam Composites Fabricated via Solvent Casting Particulate Leaching	45
Preparation and Mechanical Properties of Polyurethane-Based Negative Poisson’s Ratio Composites for Sports Protection Applications	42
A review on wire mesh reinforced polymer composite	40
Enhanced Mechanical and Thermal Properties in Epoxy-Based Glass Fabric Composites via Nano Silica Integration	36
Synergetic Effect of TiO 2 Toward Mechanically and Thermally Stable Hybrid Epoxy Nanocomposites: A Review	31
Compatibilization Strategies for PLA/PCL Blends: Tuning Thermal, Mechanical, and Biodegradation Properties via Functionalized PCL Derivatives	31
Tailoring polymer composites for critical thermal applications: a review on fibers, additives, coatings, aerogels, test methodologies	30
A Novel Approach for Synthesis of Polyaniline with Chiroptical Group at the Terminal	30
The Influence of Diol Types on the Properties of Diglycolic Acid-Based Polyester	29
Comprehensive Performance Evaluation of DLP 3D Printing Composite Resin Based on Different Proportions of UDMA/DMSO/TMO System	26
Enhanced Properties of Aramid/Salinized MWCNT Composites Through Surface Treatment: A Combined Chemical and Microscopic Approach	26
Tribological and thermomechanical evaluation of polypropylene nanocomposites containing different dimensional structures of carbon and ceramic nanoparticles	25
Fabrication of 3D printed hydroxyapatite/polymeric bone scaffold	25
Investigation of the electrochemical behaviors of fibers containing new pyrazolo[5,1-c][1,2,4]triazine derivatives	24
Developing and characterizing a flexible piezoelectric nanogenerator based on PVA/ZnO-Fe using the electrospinning method	24
Azobenzene-Based Main-Chain Liquid Crystalline Polymers Bearing Periodically Installed Alkyl, PEG, or Fluoroalkyl Segments and Photoisomerization Studies	22
Extremophiles as a “green source” of new exopolysaccharides with ecological importance and multifunctional applications	21
Sol-gel for delivery of molecules, its method of preparation and recent applications in medicine	20
Influence of compatibility in the EVA/starch/organoclay biodegradable nanocomposite on thermal properties and flame self-extinguishing behavior	20
Nanofiller Hybridization for Enhanced UV Absorption and Thermal Stability in Electrospun PAN Composites: Morphological and Structural Insights	20
Study of PDMS-based flexible conductive elastomeric composite filled with rGO-CaCO3 nanocomposite	19
A Comprehensive Review on the Characterization of Nanomaterials for the Suppression of Electromagnetic Interference Across Diverse Frequency bands	19

Tailoring the Properties of Polyurethane Composites: A Comprehensive Review	19
Homogeneity study of fluoropolymer films modified by atmospheric pressure nitrogen plasma discharges	17
Effect of Paraffin Oil Content on Physicochemical Properties of Emulsified Films Based on Soluble Starch/Sodium Alginate Mixture	17
Comparative Insights into Polymers for Solid Dispersions: Mechanisms, Sustainability, Regulatory and Clinical Perspectives	16
Dielectric and Ferroelectric Analysis of the PVDF/PMMA Blend with xGnP for Improved Storage Efficiency	16
Effect of silane treatment on eggshell powder incorporated in poly (L-lactic acid) composite membrane	16
Porous chitosan membranes by solvent evaporation technique: evaluation of the biopolymer/acetone ratio and potentiality for the membrane distillation process	16
Characterization of MMT and OMMT Nanofillers Effect on the Optical, Dielectric, Electrical, and Electrochemical Properties of PEO/PMMA/P(VDF-HFP)/LiTFSI Solid Polymer Electrolytes	15
Exploring the Frontiers and Hurdles of Phosphorus-Based Intumescent Flame-Retardant Polyurethane: A Comprehensive Journey	14
Cutting-edge Shape Memory Polymer/Fullerene Nanocomposite: Design and Contemporary Status	14
3D printed dental protheses using TPO-initiated photopolymerization. Effect of the photoinitiator concentration and the use of a UV-blocker	14
Synthesis and characterization of nanocomposites based on polyimide bearing benzimidazole side groups filled with titania nanoparticles	14
Preparation and characterization of dense membrane based metal organic networks (MOF- 5) for separation :aromatic-aliphatic mixtures	14
Effect of Oligoricinoleic Acid on Degradation of Polylactic Acid	14
Nanocomposites of Three-Dimensional Graphene Nanofoams with Polymers—Fundamentals and Progressions	13
Recent advancements and applications in thermally conductive polymer nanocomposites	13
Characterization of Nanofibrous Acrylonitrile Membranes Functionalized with Immobilized Laccases via Ugi Technique	13
Efficient synthesis and photocatalytic activity of newly synthesized core-shell nanocomposites	13
Preparation of Polyindole-MnO2/Reduced Graphene Oxide-based Ternary Composite System for Supercapacitive Application	13
Recent Advances in 3D-Printed Biodegradable Materials: Applications in Tissue Engineering and Environmental Remediation	13
Structural design and development of multilayered polymeric nanofibrous membrane for multifaceted air filtration/purification applications	13
PEO-based polymer blend electrolyte for composite structural battery	13
Graphene Quantum Dots Nanocomposite Membranes—State-of-the-art and Next-Generation Potential	13
Synthesis, Modification, and Applications of Poly(vinyl chloride) (PVC)	12
Symphony of Strength-Polyurethane-Infused MXene/Graphene Composites for Self-Healing Smart Material	12
Preparation and characterization of new types of sulfonated poly(ether sulfide sulfone) for application in fuel cell	11
Surface-crosslinking in the presence of nanoclay and characteristics of the itaconic acid-based superabsorbent polymer composites	11
Synthesis and characterization of new nanocomposites-based polyimide/modified montmorillonite and their applications in gas separation	11
Fullerene grafting in polymeric nanocomposite—a promising strategy	11
Emerging Advancements in Hybrid Molybdenum Disulfide Polymeric Nanoarchitectures and Multifunctional Applications	11
Design and application research of a flexible array plantar sensor based on P(VDF-TrFE)/SnO 2 NP S /GR for Parkinson’s disease dia	11
Correction	11
Critical Review: Graphene Production Methods and its Polymer Nanocomposites	11
Natural fiber reinforced rPET/polyester composites: a review on development, mechanical performance, and sustainable management	10
Study of the side group effect on silane coupling agents, used in titanium dioxide. Case study: polylactic acid composites	10
A Comprehensive Review of Chitosan-Composite Materials and Their Applications	10
Correction	10
A Comprehensive Review on Polycaprolactone: A Promising Polymer for Enhancing Drug Bioavailability	10
Light-Activated Nanofibers: Advances in Photo-Responsive Electrospun Polymer Technologies	10
Effect of Fillers on the Performance of Fibre Reinforced Polymer Hybrid Composites: A Comprehensive Review	10
Semi-Solid Extrusion Technique for the Processing of Gelatin-Based Composites with Improved Mechanical Performance	10
Effect of post-treatment methods and nanoparticles on the conformation of silk fibroin and their impact on electrical properties	10
Poyaniline based electromagnetic interference shielding materials	10
Design and rheological characterization of chitin modified N-vinyl pyrollidone/Acrylamide copolymer based biphasic hydrogels	10
Recycling Polyethylene Terephthalate as Food Contact Material: A Review of Technologies, Regulations, and Challenges	9
Reinforcements of cationic polyvinyl alcohol with low dosage for secondary fibre	9
Influence of various nanofillers on mechanical and electrical properties of epoxy resin composites	9
Polymer Composite Coatings Enhanced with Superhydrophobic Properties for Flexible Electronics Applications: A Review	9
Tailoring biochar production for use as a reinforcing bio-based filler in rubber composites: a review	9
Opportunities of PEEK-Based Composites for Next-Generation EMI Shielding Applications	9

An overview on synthesis, properties and applications of polycaprolactone copolymers, blends & composites	9
Effect of magnetite and graphene nanoplatelets on mechanical properties and thermal stability of thermoplastic elastomer	9
Preparation of green-stretchable hydrogel based on succinic acid-based monomer ‎with antibacterial properties	9
Electrospraying and Electrospinning of Deep Eutectic Solvent-Based Emulsions	9
Development and characterization of nanoceramic reinforced polyimide-based nanocomposites for high-temperature energy storage applications: a review	9
Advances in Additive Manufacturing of Basalt Fiber Composites: A Review of Fiber Orientation, Defect Mitigation, and UHMWPE Hybrid Systems for Lightweight Structures	9
Influence of argon irradiations on modifying the surface properties and optical behavior of polymer composite films	8
Production, characterization and water filtration performance of polyvinylidene fluoride-based membranes performance of polyvinylidene fluoride membranes	8
Flame Retardant mechanisms of Metal organic Frameworks (MOFs) Polymeric nanoarchitectures	8
Investigation for the Preparation and Performance of an Electrical Response Flexible Actuator	8
Development of Conductive Polymer PANI-Anchored Neodymium -Doped Ferrite (BNF/PANI) Composite Electrodes for High-Performance Supercapacitors	8
Advance Nanocomposites from Biopolymers and Fillers: Sources, Characterization, and End-Use Applications	8
Recent advancements in electromagnetic interference shielding of polymer and mxene nanocomposites	8
TEOS loading effect on the properties of PVA-modified polysulfone membranes	8
Flame Retardancy and Properties of Thermoplastic Vulcanizates from Dibutyl Phosphate-Bound Natural Rubber/Ethylene Vinyl Acetate Blends	8
Studies on Nitrogen Rich Benzoxazines Containing Schiff Base for Optical, Aggregation Induced Emission and Anti-Microbial Applications	8
Biopolymer blends based on poly(lactic acid) and polyamide for durable applications	8
The Role of Polyurethane and Its Composites in Additive Manufacturing of Sensors	8
Composites/Nanocomposites of natural rubber with carbonaceous micro-/nano-reinforcements—research trends and scientific distinctions	7
Advances in Additive Manufacturing for Skin Regeneration Through Materials, Techniques and Biomedical Applications	7
Characterization of the mechanical and tribological properties of TiO2/polyimide nanocomposites produced using spark plasma sintering method	7
Electrospun nanofiber for drug delivery applications: a review	7
Optimizing Photovoltaic Performance of DSSCs Through SnO₂-Loaded Polyindole Nanocomposites	7
A review on polyaniline and graphene nanocomposites for supercapacitors	7
Do Carboxymethyl Cellulose and Pal-KTTKS Make Bacterial Cellulose a Superior Wound Dressing or Skin Scaffold?	7
A Review on Synthesis, Structure, Properties, and Film Capacitor Applications of Poly(4-methyl-1-pentene) and Derived Materials	7
Influence of curing system composition and aging on the performance of rubber magnets based on NBR and EPDM	7
State-of-the-Art of Fullerene-Based Nanocomposite Nanofibers—Enterprise and Technological Amenabilities	7
Enhanced performance of hybrid piezo/triboelectric using BaTiO 3 /polymer composite film modified with rGO	7
Preparation of bio-based heat storage microcapsules of cellulose acetate butyrate/ polymethylmethacrylate composite by micro-suspension polymerization	7
Fabrication and mechanical characterization of different stacking sequences of glass/flax embedded fibers into hybrid polymer composites	7
Investigating the morphological, mechanical, barrier, and antibacterial properties of the polycaprolactone nanocomposite films reinforced with hybrid zinc oxide/polyhedral oligomeric silsesquioxane na	7
Amphiphilic Copolymers—A Turning Point on the Way to Functional Nanocomposites and Technologies	6
Facile, efficient and controllable polysulfide sealing over physical mixture of different crystalline forms of MnO 2	6
Effect of hydroxyl terminated polybutene elasticizing additive on the wear of paper friction material	6
Development, characterization, and evaluation of polymer-based hydrogel membrane patches for intestinal delivery of gliclazide	6
Synergistic hybrid effect of nano fillers on the structure and properties of asphalt composites	6
Nanosulfur Nanoreinforcements—Unlocking the Promises of Polymers and Polymer/Nanocarbon Nanocomposites	6
Recent Advances in the Antimicrobial and Antioxidant Capabilities of PLA Based Active Food Packaging	6
Hydrogels: multifunctional biomaterials with versatile applications	6
Water-mediated chelation dynamics of dicarboxylic acid functionalized TiO 2 nanoparticles for β-nucleation enhancement in isotactic polypropylene composites	6
Functional Biofilms Based on CMC for Biodegradable Applications: Effect of GMA, AAM, and ZnO Nanoparticles	6
Optimizing Electrochemical Performance of Biopolymer Electrolytes: Enhancing Ion Transport in CS: MC-Based Polymer Electrolytes Through Glycerol Plasticization and TiO 2	6
Preparation and Characterization of Magnetic Polymeric Micro- and Nanocomposites for Industrial Applications	6
Synthesis of nano magnetic chitosan modified with acrylamide schiff’s base for simultaneous removal of Cu(II) and Co(II) from waste water samples	6
Piezoelectric enhanced photocatalytic properties of PVDF–ZnO/Cu nanofibers prepared by electrospinning technique	6
Strategies to Design Multifunctional Tear-Proof and Permeation Resistant Food Packaging Films: An Overview	6
Amino functionalized bimetallic NiCo MOF integrated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene matrix for proton exchange membrane fuel cell	6
Melt processing of graphene-coated polylactide granules for producing biodegradable nanocomposite with higher mechanical strength	6
Vanillin derived partially bio-based benzoxazine resins for hydrophobic coating and anticorrosion applications: Studies on syntheses and thermal behavior	6
Enhancement of optical and piezoelectric properties of P(Vinylidene fluoride-hexafluoropropylene)/N,N-Dimethyl-4-nitro-4-Stilbenamine composites for optoelectronic applications	6
Development of exfoliated mica waste/natural rubber composites by latex stage mixing	6
Comparative Study of Antibacterial Properties of Electrospun Microfibers of Cinnamaldehyde Embedded in and Covalently Bonded to Poly (Methyl Methacrylate)	6
DMARDS incorporated injectable hydrogels in cartilage tissue regeneration: a review	6
Observing the Antagonistic Effect in the Graphene-Polyaniline Hybridization and Its Correlation with CO 2 Sensing Behaviour	6
Biocompatible Graphene Polymer Composites: New Frontiers in Biomedical and Environmental Applications	6
Bio-based and biodegradable materials for droplet microfluidic encapsulation	5
Borophene polymeric nanoarchitecture and applications: a review	5
Flame retardant mechanisms of Montmorillonites, layered double hydroxides and molybdenum disulfide polymeric nanoarchitectures for safety in extreme environments	5
Advancements in healthcare materials: unraveling the impact of processing techniques on biocompatibility and performance	5
Fabrication and drug release behavior of the composite membrane via silk fibroin cross-linked with sodium alginate	5
Thermochromic and Electrochromic Characteristics of Graphene Reinforced Polymeric Nanocomposites—A Review	5
Chitosan/magnetic chitin nanowhisker polyelectrolyte membrane for direct methanol fuel cell applications: preparation, characterization, and performance analysis	5
The effect of polycaprolactone polyol molecular weight and chain extender type on the physico-mechanical properties and gas permeability of polyurethane thermoplastic elastomer membranes	5
Unraveling the Properties of Photosensitive Schiff Base Benzoxazines: A Study on Thermal Stability, Antimicrobial, Aggregation-Induced Emission and Optical Properties	5
Utilization of ionic liquids as compatibilizing agents for polymer blends – preparations and properties	5
The fabrication strategies for chitosan/poly(vinyl pyrrolidone) based hydrogels and their biomedical applications: A focused review	5
A comprehensive review of PLA-blended biocomposites and their application in biomedical and food packagings	5
Frequency and temperature dependent dielectric properties of polyvinyl alcohol/polystyrene sulfonic acid/cobalt oxide nanocomposite films	5
Synthesis and Characterization of polyethylene/Metal Organic Framework Nanocomposites: enhanced thermal stability and crystallinity through UiO-66 Nanofiller incorporation	5
A Review on Polymer-Based Nanocomposites as Radar Absorbing Materials	5
Preparation and performance evaluation of Polycarbonate/Polysulfone blend membranes for removal of Bovine serum albumin from water	5
Comprehensive Study on Structural, Optical, Electrical and Thermal Properties of HPMC/PEG-Li 2 SO 4	5
Metal organic frameworks (MOFs)@conducting polymeric nanoarchitectures for electrochemical energy storage applications	5
Recyclable and super-stretchable conductive elastomeric composites with a carbon nanostructure interconnected network structure for effective thermal management and excellent electromagnetic wave supp	5
Fabrication of PLA Based/Lithium Disilicate Glass Filaments for Dental Glass-ceramic Preparation by Fused Deposition of Ceramics	5
Effects of functionalized CNTs in improving the dielectric, corrosion protection, and mechanical properties of epoxy nanocomposites for automotive/aircraft components	5
Effect of nucleating agent incorporation on the crystallization and mechanical properties of polylactide/polyamide elastomer blends	5
Silicone Rubber Composites Reinforced by Onion-Like Carbon and Carbon Nanotube Hybrid Fillers for Flexible Dielectric Materials	5
Cu-immobilized cellulose filter paper: effect of polymer structure and functionality on catalytic activity and reusability for 4-nitrophenol reduction	5

Inscriptions of Metal Organic Frame Work (MOF) Reinforcements in Polymeric Nanocomposites—State-of-the-Art and Multifaceted Impressions	5
The Effect of the Surface Treatment on TiO 2 Particles When Used as a Filler on Crystallization and Mechanical Properties of Polylactic Acid Composites. Case of Stud	4
The influence of cassava starch on the properties of PLA/PBS/SCG films for packaging applications	4
Polymeric composites and hybrids for high-voltage insulators	4
New ARBOFILL composites: preparation and characterization	4
Hydrogel as an advanced energy material for flexible batteries	4
An investigation on enhancing the wear resistance of PTFE-based composites through complex fillers incorporating a combination of kaolinite and single-walled carbon nanotubes	4
Eco-Friendly Packaging Innovations: Integrating Natural Fibers and ZnO Nanofillers in Polylactic Acid (PLA) Based Green Composites - A Review	4
Synthesis and characterization of functional thermoresponsive photoactive copolymers and study of their thermal and photoluminescence properties	4
The Perspectives, Synthesis, and Archives of CNT-Based Carbon Fiber-Reinforced Composites: A State-Of-The-Art Review	4
Direct ink writing-based additive manufacturing of thermoplastic elastomeric materials	4
N-Doped Graphene and Polymer Sequent Nanocomposite—Nitty-Gritties and Scoping Insights	4
Electromagnetic interference shielding effects of modified carbon nanotube-nylon 12 composite films	4
A Novel Polycarboxylate Superplasticizer Synthesized by Photo-ATRP for Enhanced Cement Performance	4
Progress in Preparation, Modification and Application of Electrospun Nanofiber Materials in Bone Tissue Engineering	4
Azeotropic dehydrative (solution) polycondensation of lactic acid to polylactic acid (PLA): A in-depth review of an overlooked method for manufacturing PLA	4
Mechanical, Thermal, and Flame-Retardant Performance of Polyethylene Terephthalate Fabric/Epoxy Nanocomposites Reinforced with Graphene Nanoplatelets	4
Enhancing water treatment with polyvinylidene fluoride (PVDF)/cellulose composite membranes: a comprehensive review	4
Overview of Synthesis, Properties, and Applications of Alkyl Fumarate Polymers	4
A novel PEG-based hydrogel possessing disulfide bonds: synthesis via click chemistry and study on swelling behavior	4
Influence of moisture absorption on tensile and compressive properties of natural fiber-reinforced thermoplastic composites	4
Polyvinyl Alcohol: Recent Advances and Applications in Sustainable Materials	4
Synergistic Influence of Polymer Dispersants on the Thermal Performance of ZnO Nanofluids for Heat Exchanger Applications	4
Recyclable and biodegradable smart electronic circuits on flexible substrates	4
Molecularly Imprinted Polymers and Nanocomposites—Essentials Features and Applied Versatilities	3
Rheological behavior of polyphenylsulfone-organic additives solutions: a key factor in membrane fabrication process	3
Emerging Frontiers in Natural Polymers: Sustainable Innovations for Smart Agriculture and Next-Generation Food Systems	3
Polymer Membrane Fuel Cells: Shaping the Future of Clean Energy - A Versatile Review	3
Investigating the role of PA6/GO interactions on the morphological, rheological, and mechanical properties of PA6/ABS/GO nanocomposites	3
Enhanced dielectric and electrical performance of poly(vinyl alcohol) (PVA)-potassium sodium niobate (KNN)- polyvinylpyrrolidone (PVP) composite films	3
Electrical Properties of Novel PVA/PVDF/ZnO/TiO 2 Polymer Nanocomposites for Flexible Energy Storage Applications	3
Synthesis and characterization of Eugenol-Trithiol-Methylenebisacrylamide and Eugenol-Trithiol-Allyeugenol copolymers for antibacterial food packaging	3
Manufacturing and characterization of waste polyethylene terephthalate-based functional composites reinforced with organic and inorganic fillers	3
A review of the preparations, properties, and applications of smart biodegradable polymers	3
Synthesis and Characterization of a Tri-Functional Hydroquinone-Furfural Epoxide Resin for Advanced Composites	3
Mechanical, Thermal, and Optical Properties of Zinc Cobaltite-Filled Polyvinyl Alcohol Composite Films	3
Preparation of thermostable polypropylene membranes with a controlled structure by nonsolvent thermally induced phase separation	3
Non-Crystalline Flexible Amorphous Thermoplastic Polyurethane Elastomer: Selecting the Appropriate Isocyanate and Chain Extender	3
Stimuli-responsive Double Network CMC-based Hydrogel Nanocomposite with enhanced mechanical properties for proliferation and differentiation of PC12	3
Characterization, Biodegradation and Numerical Analysis of Black Cumin Cake-Filled PLA Composites for Eco-Cutlery Applications	3
Influence of Discharges and UV Irradiation on the Electrical Properties of High Pressure Polyethylene and Compositions on Its Base	3
Engineering Polymers: From Biodegradable Platforms to Intelligent Drug Carriers	3
Electrorheological Fluids with Polymers/Polymeric Nanocomposites—Retrospective and Prospective	3
The Electrical, Mechanical, and Electromagnetic Interference Shielding Properties of Oriented Multilayered Polymer Composites Based on polypropylene/Carbon Black	3
Magnetic nanoparticles coated with a molecularly imprinted polymer via manganese-doped ZnS:Mn quantum dots for the determination of Triflumuron	3
Thermoelectric properties investigation of Tungsten carbide-filled poly (vinyl alcohol)/Polypyrrole ternary composites	3
Critical Review of Reinforcement Effect in PEEK Tribology and Its Usage in Biomedical, Coating and Bearing Applications	3
Resiliency and dyeability of environmentally friendly polypropylene/poly (trimethylene terephthalate)/nanoclay blend nanocomposite fibers	3
Preparation and Characterisation of VS4-PANI Composites for Fluorescent Metal Ions Sensing Applications	3
Surface and structural modification of HCl-doped poly(MT-co-3-BA) copolymer and the feasibility study of humidity sensor	3
A critical review on cellulose nano structures based polymer nanocomposites for packaging applications	3
Neodymium Oxide Embedded Polypyrrole Matrix for Humidity Sensing Applications	3
Potentiometric determination of Pb 2+ ions using hybrid assembly of zinc oxide@polyaniline nanocomposites	3
Construction of radiation attenuating polymeric nanocomposites and multifaceted applications: a review	3
Optimization of Geometric Configurations in Polyurethane-Based Porous Structures: Mechanical Performance and Dynamic Property Evaluation	3
Review on Covalent Organic Frameworks: Design, Synthesis, and Cutting-Edge Applications in the Biomedical Technology	3
Introducing PCL-Based Electrospun Nanocomposite Wound Dressings: Synergistic Effects of Curcumin and Reduced Graphene Oxide	3
Development of antihyperlipidemic drug loaded β-CD-based microparticulate carrier systems: tuning and optimization	3
Preparation and characterization of polylactic acid-based composite incorporating with BaSO 4 for low radiation dose shielding	3
Synthesis and Characterization of Nanostructured Co 3 O 4 /Polyaniline Fiber Composite for Room Temperature Ammonia Sensing Using	3
Multifunctional composite materials for electromagnetic interference shielding	3
Preparation of polyacrylonitrile-based solution blow spinning fluorescent nanofibers from perylene-doped silica nanoparticles	3
Improvement of hybrid liquid membrane performance in removal of cadmium from wastewater using GO filled-polyethersulfone membrane	3
Synthesis and characterization of nano-biocomposite (PMMA-hydroxyapatite - CaZrO 3 ) for bone tissue engineering	3
Designing Multifunctional Biologically Active Poly(Azomethine-Ether) Containing Trimethylbenzene Moiety as New Antimicrobial Polymers	3
Shape Memory Polymers, Blends, and Composites: Processing, Properties, and Applications	3
Influencing Factors and Stimulus-Sensitivity of Chitosan/Polymethacrylic Acid (CS/PMAA) Nanogels as Nanocarriers	3
Halloysite nanotubes assisted design of polymeric nanoarchitectures for multifarious applications – a review	2
Tailored 3D POSS Structures as Co-Curing Agents: Kinetics and Thermal Stability of Epoxy Nanohybrids	2
Effective CO 2 adsorption in hybrid 2D material with cellulose and its derivatives	2
Hydrogel-based drug delivery systems - a review	2
Polymeric nanocomposite with polyhedral oligomeric silsesquioxane and nanocarbon (fullerene, graphene, carbon nanotube, nanodiamond)—futuristic headways	2
3D-Microneedles: A novel approach for skin directed delivery and its application	2
Sensing analysis of polyaniline – stannous chloride pentahydrate composite of CO 2 gas sensors	2
Advancements in halogen-free polymers: exploring flame retardancy, mechanical properties, sustainability, and applications	2
Carborane in Polymers—Existent Stipulations and Technological Trademarks	2
Step by Step Modification of Electrospinning Process to Fabricate Ultra-Fine Dextran Nanofibers	2
Dynamic fracture characterization of glass fiber composites reinforced with through-thickness nylon fibers	2
Enhanced Antimicrobial Carboxy Methyl Cellulose-Based Hydrogel–ZnO Composites Film for UV Blocking and Controlled Drug Release	2
Physico-mechanical properties of gamma irradiated polypropylene/ ethylene propylene diene monomer/CaCO 3 nanocomposites	2
Enhancing UV resistance of TiO2 reinforced Kevlar 29 fiber using Sol-Gel & Low-temperature Hydrothermal Processes	2
Enhancing mechanical properties of 3D-printed PLA composites via topology optimization and nickel coating	2
Recent progress in experimental and molecular dynamics study of carbon nanotube reinforced rubber composites: a review	2
Effect of chitosan on the insulation and smoke absorption properties of expanded vermiculite composites	2
Ion exchange behavior of novel Pani -Ti(IV) phosphosulphosalicylate hybrid cation exchange material for the selective separation of Pb(II) in environmental remediation	2
Conductive Dual-Network PAAm–Gellan Gum Organogels for Cryotolerant Bioelectronics	2
Study on the sustained release properties of drug-loaded nanomicelles with amphiphilic poly(amino acid)s	2
Investigation of flexible electrochemical storage with Li+/PVdF-HFP/PEO blend	2
Development of Curcumin-Added pH-Sensitive PLA/TPS-Based Films for Packaging Applications	2
A Review of Nanocomposite Based Polymeric Pour Point Depressants for Crude Flow Assurance	2
Super hydrophobic self-stratified coating based on epoxy terminated polyurethane/siloxane nano-composite	2
Fire retardant potential of natural fiber reinforced polymer composites: a review	2
Compositional Effect of Nanographite on the Dielectric and Electrical Properties of Three-Phase Polymer-Ceramic Composites	2
Effect of graphene arrangement on the thermal conductivity of graphene/polymer nanocomposites	2
Achieve superhydrophilicity of polycarbonate with polyethyleneimine and poly(acrylic acid-co-maleic acid)	2