Materials Today Sustainability

Article	Citations
Defect-rich carbon nanosheets promoting power density of lithium-ion capacitors in redox electrolyte system	120
Coordinated disposal of FGD gypsum and power plant concentrated brine via preparation of α-hemihydrate gypsum	113
Self-assembled Cu doped NiO loaded reduced graphene oxide: Multifunctional photothermal framework for interfacial water evaporation, disinfection and power generation	106
Roles of experimental variables in optimised fabrication of microrecycled CuO-based photoelectrodes	85
Evaluation of bioaerosol inactivation ability of chitosan-based biohybrid nanofibers loaded with aloe vera mediated silver nanoparticles: Sustainable material for environmental protection	83
Photoluminescence and supercapacitor applications of dysprosium doped rhombohedral silver gallium oxide nanoparticles	83
n-Si/p-Sb2Se3 structure based simple solar cell device	78
Aerogels for sustainable CO2 electroreduction to value-added chemicals	76
Matrix curing and stress field development around fiber during the solvent evaporation-induced repolymerization of recycling composites	67
Non-PGM hollow fibre-based after-treatment for emission control under real diesel engine exhaust gas conditions	64
Tailored transition metal-doped TiO2@Fe3O4 nanohybrids for efficient photocatalytic dye removal: Optimization via neural networks and response surface approaches	60
Advances in photocatalytic environmental and clean energy applications of bismuth-rich oxy halides-based heterojunctions: a review	58
Natural organic matter (NOM), an underexplored resource for environmental conservation and remediation	58
A review of future directions in the development of sustainable carbon fiber from bio-based precursors	53
Ultra-hybrid sensor based on magnetic and fluorescent biomaterial for the sensitive/selective detection of toxic Ag+ and Hg2+ ions in real samples	52
Conversion of waste into sustainable construction materials: A review of recent developments and prospects	47
High entropy alloys prepared by spark plasma sintering: Mechanical and thermal properties	46
DFT and TD-DFT studies of perovskite materials LiAX3 (A=Ge, Sn; X= F, Cl, Br, I) in reference to their solar cell applications	45
Optoelectronic properties of GaP:Ti photovoltaic devices	44
Development of poly(n-alkylene oxalate)s toward a new kind of seawater degradable plastics	43
First-principles study of GeC/Ga2SO heterostructure as a potential direct Z-scheme photocatalyst for water splitting	43
Highly sensitive and biocompatible Tyrosinase sensor based on one-step synthesis of carbon dots	42
A green and low-cost approach to recover graphite for high-performance aluminum ion battery cathode	42
Efficient and eco-friendly preparation of N/P/O co-doped porous carbon electrode for zinc-ion hybrid supercapacitors by laser carbonization	41
An intrinsic phase change elastomer with superior stretchability and reparable capabilities for self-thermal managing stretchable electronics	40

Unraveling the toluene adsorption mechanism of MIL-101(Cr) derived from PET waste for COV removal applications	40
Sustainable engineering of wool keratin towards cobalt atoms fixation for enhanced electrocatalytic water splitting	40
Space-confined engineering boosted high-performance of ultrafine nickel selenide nanocomposites for sodium-ion capacitors	39
Unveiling host-guest interactions and stability of amine-functionalized silica sorbents for carbon capture	37
Investigating degradation & mitigation strategies for proton conducting membrane in proton exchange membrane fuel cell: An approach to develop an active & stable membrane	33
Efficient piezocatalytic hydrogen peroxide generation over MAX phase piezocatalysts	33
Regulated lithium deposition behavior by an artificial coating of Cu foil for dendrite-free lithium metal batteries	32
Trends in sustainable biobased packaging materials: a mini review	31
Low-temperature hydrothermal carbonization of activated carbon microsphere derived from microcrystalline cellulose as carbon dioxide (CO2) adsorbent	31
Development of biodegradable films reinforced with silver functionalized cow milk carbon dots for active food packaging applications	31
Utilization of sugarcane bagasse ash in binary, ternary, and quaternary blended cement concrete –A waste to Wealth approach	30
A bibliometric analysis on the development trend of graphene-based transparent conductive electrodes (2009–2022)	29
Recent advances and perspectives on Sb2S3 thin-film solar cells	29
Converting fruit waste into carbon dots for bioimaging applications	29
Effects of different scanning speeds on microstructure evolution and tribological properties of Inconel 718 alloy vacuum electron beam surface modification	28
Hybrid architecture of Multiwalled carbon nanotubes/nickel sulphide/polypyrrole electrodes for supercapacitor	28
Emerging borophene two-dimensional nanomaterials for hydrogen storage	28
A soluble and recyclable polymeric adsorbent of intrinsic microporosity for CO2 capture	28
Recent advances in porous organic polymers (POPs): The emerging sorbent materials with promises towards toxic and radionuclides metal ions separations	27
Investigating the effects of MWCNTs on sustainable alkali-activated mortar: physical, rheological, and mechanical analysis	27
A semi-conductive rigid polyurethane foam derived from kraft lignin polyol and a PEDOT: PSS coating	27
Preparation of toughened thermal insulating polylactic acid/thermoplastic polyester elastomer (TPEE) microcellular foam using in situ fibrillation and multi-hydrazide nucleating agent self-assembly	26
Theoretical studies on the role of water in ionic liquids at ZIF (IL@ZIF) complex and its effect on selective CO2 separation	26
One-pot synthesis of regenerative calcium counterions from waste chicken eggshells for SO2-to-sulfur reduction	25
Recent developments in CO2 permanent storage using mine waste carbonation	25
Cu-based materials as co-catalysts for photocatalytic CO2 reduction: A mini review	24
An N,P,O-doped porous carbon electrode material derived from a lignin-modified chitosan xerogel for a supercapacitor	24
Synthesis, properties, and state-of-the-art advances in surface tuning of borophene for emerging applications	24
Biomimetic MOFs/GO membranes with enhanced charge density for osmotic power generation	24
A review on versatile metal vanadates photocatalysts for energy conversion and environmental remediation	23
Cerium-based metal–organic framework-conducting polymer nanocomposites for supercapacitors	23
Adsorption behavior of Mg–Al layered double hydroxide on Pb(Ⅱ), Zn(Ⅱ), Cd(Ⅱ), and As(V) coexisting in aqueous solution	23
Painting sustainable wearables: facile and economical all-recycled dual temperature-motion wearable sensor for monitoring of human temperature and joint movements	23
A dye-sensitized solar cells with an efficiency of 10.01% based on the MoP/MoNiP2@Ti3C2 composite counter electrode	22
Selective sensing of explosive nitrophenol compounds by using hydrophobic carbon nanoparticles	22
Emerging opportunities in the valorisation of wheat bran byproduct as additive in polymer composite materials	22
Flower-like bismuth oxycarbonate-mediated selective oxidative cleavage of C–C bond in the presence of molecular oxygen	22
Photocatalytic CO2 reduction to C1–C5 hydrocarbons using K2Fe2O4/g-C3N4 as coupling photocatalyst	22
Hydrothermal synthesis of transition metal oxides, transition metal oxide/carbonaceous material nanocomposites for supercapacitor applications	22
Heterogeneous photocatalytic materials for sustainable formation of high-value chemicals in green solvents	22
Researching the design of a glass-bead retro-reflective material to reduce downward reflection for urban heat island mitigation	21
Layered silicate PLS-3 with PREFER structure supported Pd nanoparticles: A recyclable catalyst for the synthesis of furfuryl ethyl ether	21
Investigation of CO2 sequestration performance and statistical analysis of dye removal efficiency of liquefied hornbeam based carbon foams: Effects of biomass/solvent weight ratio, tar contribution, a	21
Insights into the structure sustainable evolution and crystallization kinetics of amorphous Mg60Ni30La10 alloy	21
Atomic-scale planarization surface of quartz glass induced by novel green chemical mechanical polishing using three ingredients	21
Deep yellow emission and high energy device applications of copper doped orthorhombic zirconium titanate nanoparticles	20
Solar brilliance unleashed: Maximizing performance of novel carbon-based Rb-doped CsSnI3 perovskite solar cells by gradient doping	20
O2-promoted photodoping for enhanced photocurrent on polymeric carbon nitride	20
Design and fabrication of low-cost renewable carbon electrode materials and their thermo-kinetics for sustainable energy storage applications	20
Molybdenum-doped Ni–S nanostructure towards energy saving for hydrogen production coupling urea oxidation reaction	20

Tinospora cordifolia extract as an environmentally benign green corrosion inhibitor in acid media: electrochemical, surface morphological, quantum chemical, and statistical investigations	20
Electrodeposition of hydroxyapatite and graphene oxide improves the bioactivity of medical grade stainless steel	20
Synthesis and cryogenic performance of closed-loop recycled Al2O3/epoxy resins composites	19
Performance evaluation of waste phosphogypsum-based solidified sludge: From laboratory test to field application	19
Facile fabrication of novel In2S3–BiOCl nanocomposite-supported porous polymer monolith as new generation visible-light-responsive photocatalyst for decontaminating persistent toxic pollutants	19
Preparation and combustion behavior of carbon-based synfuel from biomass/coal/CaO by co-carbonization process	19
Micro/nanomotors for metal ion detection and removal from water: A review	19
Roles of molecular structure of carbon-based materials in energy storage	19
The interfacial charge change enhanced by Pr0.6Sm0.4Co0·8Mn0·2O3 activated peroxymonosulfate was used for the efficient degradation of tetracycline under the nanoscale domain limiting and distance eff	19
Sustainable approach for corrosion control in mild steel using plant-based inhibitors: a review	19
Enhanced thermoelectric performance of Bi2Te3 by carbon nanotubes and silicate aerogel co-doping toward ocean energy harvesting	18
Magnetically separable ZnFe2O4 grafted g-C3N4/rGO ternary nanocomposites for enhanced photo-Fenton catalytic activity under visible light	18
Synthesis, mechanisms, challenges, and future prospects of Ti3C2 MXene and its heterojunctions for photocatalytic dye degradation efficiency: a comprehensive review	18
Degradable hydrogels: Design mechanisms and versatile applications	18
Recent advances in MXene-based anode materials for alkali metal-ion capacitors	18
Critical insights and recent updates on passive battery thermal management system integrated with nano-enhanced phase change materials	18
Hybrid human energy harvesting method of MTEG-TENG based on a flexible shared substrate	18
Magnetic-field-assisted electrodeposition regulates the Ni:Fe ratio for water oxidation	18
Porous materials prepared from eco-friendly attapulgite and gallnut stabilized aqueous foam templates for high-efficient removal of organic pollutants	18
A comprehensive review of various biopolymer composites and their applications: From biocompatibility to self-healing	18
Epoxy primer topcoat syncretic coating prepared by using modified graphene oxide incorporated with TiO2 nanoparticles	17
A critical analysis of electric arc furnace (EAF) slag for sustainable geopolymer concrete production	17
Influence of forging pretreatments on microstructure evolution and surface roughness of Al 6061 alloy	17
Form-stable phase change composites with multistage pores based on black phosphorus nanosheets/PVA aerogel for efficient solar photothermal conversion	17
Utilizing 3-aminophenol formaldehyde resins microspheres for the synthesis of three-dimensionally ordered macroporous oxides	17
Coal gasification slag for preparation of environmentally friendly superabsorbent composites with rapid water absorption and salt tolerance	17
Sb2(S, Se)3-based photovoltaic cell with MoS2 as a hole transport layer: a numerical investigation	17
Microwave-synthesized heteroaromatic porous organic polymers for CO2 capture and hydrogen storage	17
Sustainable chitosan hydrogen derived platinum/N-doped carbon aerogel for efficient oxygen reduction and hydrogen evolution reactions	17
High-performance anion exchange membrane water electrolysis by polysulfone grafted with tetramethyl ammonium functionalities	16
Synergistic sorption: Enhancing arsenic (V) removal using biochar decorated with cerium oxide composite	16
Hydroxyethyl cellulose/boron nitride nanosheet films coated with silver nanowires for electronic packaging applications	16
Pump-inject antimicrobial and biodegradable aerogel as mask intermediate filter layer for medical protection of air filtration	15
Heteroatoms (B, N, and P) doped on nickel-doped graphene for phosgene (COCl2) adsorption: insight from theoretical calculations	15
Low-cost and sustainable nanosilver decorated on hydroxyapatite from fishbone for effective reduction of organic compounds in aqueous solution	15
Nanosized copper stabilized on ternary P, N, S-doped graphene from chitosan shellfish waste: preparation and catalysis of single and double A3-type amine coupling	15
Energizing geriatric healthcare: A triboelectric energy harvester with self-powered morse code generator and IoT-Enabled remote sensing tactile patch	15
Trends and perspectives on bacterial nanocellulose: A comprehensive analysis from the three helixes of innovation	15
Facile scalable multilevel structure engineering makes Ti0.667Nb1.333O4 a new promising lithium-ion battery anode	15
Achieving highly anisotropic three-dimensional, lightweight, and versatile conductive wood/rGO composite	15
Tuning the Fe–N4 electrocatalytic CH3NO2 reduction reaction based on axial ligands: A computational study	15
Recent progress in solid polymer electrolytes with various dimensional fillers: a review	14
Recent advances in functionalized porous adsorbents for radioactive waste water decontamination: Current status, research gap and future outlook	14
Research progress and prospect of copper oxide nanoparticles with controllable nanostructure, morphology, and function via green synthesis	14
Nanocast nitrogen-containing ordered mesoporous carbons from glucosamine for selective CO2 capture	14
A comprehensive review of metal-organic frameworks sorbents and their mixed-matrix membranes composites for biogas cleaning and CO2/CH4 separation	14
Heavy metal detection in water using MXene and its composites: A review	14
Two-step electrodeposition to achieve durable IrOx electrode with a semi-crystalline structure for efficient OER	14
Metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and hydrogen-bonded organic frameworks (HOFs) in mixed matrix membranes	14
Rutile titanium dioxide and graphene-like OCN tailoring free-standing carbon fiber aerogel as polysulfide anchoring materials for lithium–sulfur batteries	14
Promoting the electrochemical performance of commercial LiMn2O4 by hydrothermal modification with poly (vinylidene fluoride)	14
Solar steam generation using hybrid nanomaterials to address global environmental pollution and water shortage crisis	14
Melem Hydrate-Derived g-C3N4 Micro-Rods Coordinated with Cu2+: Why is Cu a superior cocatalyst compared to Ni and co?	14
Biomass-based carbon microspheres for removing heavy metals from the environment: a review	14
Facile ligand-regulated synthesis of defective Fe-MOF nanosheets for efficient tetracycline degradation via photoassisted enhanced activation of persulfate	14
Harnessing Ti3C2-WS2 nanostructures as efficient energy scaffoldings for photocatalytic hydrogen generation	14
Prediction of state-of-health of lithium-ion battery based on CEEMDAN-SG-LSTM combined model	14
Boosted ultrasound-sunlight-driven removal of organic pollutant over double Z-scheme plasmonic ZnO–Cu–CuO/g-C3N4 nanophotocatalyst: design via in-situ co-precipitation hybrid with various sonication p	13
On performance of thin-film meso-structured perovskite solar cell through experimental analysis and device simulation	13
Induced porous structure with a slight change in mechanical properties of hydroxyapatite-based nanocomposites synthesized from waste bovine bone and their bioactivity	13
Behavior of sintered body properties of hydroxyapatite ceramics: effect of uniaxial pressure on green body fabrication	13
Novel Indium nanocomposites for Photonic applications	13
Aminated nanocellulose-mediated synthesis of polyaniline/nanocellulose hybrid materials for sustainable conductive and supercapacitors nanopapers	13
Unraveling lithium-ion intercalation in lead-free bismuth-based vacancy ordered halide perovskites supercapacitors	13
Rationally designed bulky MoS2@C@MoS2 hierarchical materials as an enhanced anode for lithium-ion batteries	13
Unlocking the potential of mixed-valence silver oxide for electrochemical valorization of 5-hydroxymethylfurfural into valuable products	13
BiOX(X=Cl, Br, I)-based S-scheme heterostructure photocatalysts for environmental remediation and energy conversion	13
Energy-efficient scientific-technological approaches to the processing of plastic waste PET, PE, PP, PS to produce hydrogen-containing gas and titanium carbide powder	13
Review of electrolyte strategies for competitive dual-ion batteries	13
Improving the cycling stability of biochar electrodes by purification via ion exchange	13
A class of promising fuel cell performance: International status on the application of nanofluids for thermal management systems	13
Imidazolium-based ionic liquid–assisted processing of natural biopolymers containing amine/amide functionalities for sustainable fiber production	13
Carbon dots encapsulated in (YGd)2O3:Eu3+ nanophosphors for thermal sensing, advanced forensic and information security applications	13
Electrodeposition synthesis of Cu2ZnSnS4(CZTS) thin films as a promising material for photovoltaic cells: Fundamentals, methods, and future prospects - A comprehensive review	13
Waste-to-energy material: Winery-waste derived heteroatoms containing graphene-like porous carbon for high-voltage supercapacitor	13
From light to chemicals: Breaking ground in photocatalytic H2O2 production for a sustainable future	12
Proximate white light-long phosphor emission and a photoelectrochemical probe from boron defects engineered carbon-nitride nanosheets	12
Nitrogen-doped carbon dots as green materials for sensitive and selective detection of isorhamnetin	12
Enhancing latent heat storage: Impact of geometric modifications, S-shaped enclosure walls, and L-shaped fins	12
Quantum-chemistry-computing and experimental development of a new n-alkenyl amino propionic and imino di-propionic acids-based gum inhibitor for gasoline	12

In-situ growth of metal coordination-synergistic imprinted polymer onto shrimp shell-derived magnetic FeNi biochar for specific recognition of monocrotaline in herbal medicine	12
Synthesis of dimethyl carbonate from CO2 and methanol over CeO2 catalysts prepared by soft-template precipitation and hydrothermal method	12
Recycling of waste coal-based filter materials into carbon anode materials for potassium and sodium-ion batteries	12
Metal-free convenient homogeneous bifunctional ionic liquid catalysed selective cross-hydrogenation ketone to alcohol	12
Wide application of metal-organic frameworks in lithium–sulfur battery	12
Photothermal superhydrophobic surfaces with dual self-healing capabilities	12
Bio-approach ZnO/Ag nano-flowers: enhanced photocatalytic and photoexcited anti-microbial activities towards pathogenic bacteria	12
Synthesis of a bio-based and intrinsically anti-flammable epoxy thermoset and the application of its carbonized foam as an efficient CO2 capture adsorbent	12
Hierarchical Cu0.92Co2.08O4@NiCo-layered double hydroxide nanoarchitecture for asymmetric flexible storage device	12
Schottky-Functionalized Type-II heterojunction of Ag/CuNb2O6/g-C3N4: Efficient photoredox capability of CO2 to valuable fuel products via gas phase adsorption	11
Thiazolyl-linked conjugated microporous polymers for enhancement adsorption and photocatalytic degradation of organic dyes from water	11
Sustainable solution to the recycling of spent SCR catalyst and its prospective gas sensor application	11
Application of molecularly imprinted polymers in the water environmental field: A review on the detection and efficient removal of emerging contaminants	11
Production methods for bacterial biomaterials: A review	11
Nontoxic and earth-abundant Cu2ZnSnS4 (CZTS) thin film solar cells: A review on high throughput processed methods	11
Interaction of organic-inorganic hybrid perovskite electron system with lattice system	11
An overview of metal-organic frameworks-derived carbon as anode materials for sodium- and potassium-ion batteries	11
Alkalized MXene-supported nanoscale zero-valent iron in situ derived from NH2-MIL-88B(Fe) for the highly efficient catalytic reduction of 4-nitrophenol	11
Structure and performance of polyvinylchloride microfiltration membranes improved by green silicon oxide nanoparticles for oil-in-water emulsion separation	11
Green magnesium oxide prepared by plant extracts: synthesis, properties and applications	11
Boosting the oxygen bifunctional activity on cobalt nanocrystals/RGO with extended durability	11
Natural substance-mediated synthesis for biochar-supported nanoscale zero-valent iron enhanced the performance of the catalytic process	11
Utilization of local rich banana straw bioresource to solve Cd2+ pollution problem in major non-ferrous metal production areas of Southwest China	11
Enhanced dehydroaromatization of methane with methanol on Mo-ZSM-5/ZSM-11 intergrown zeolite materials	11
Lignin and its carbon derivatives: Synthesis techniques and their energy storage applications	11
Rapid and efficient mineralization of methylene blue dye (above 95 % in 20 min) catalyzed by ZnO nanoparticles under sunlight	11
Surface modification of copper selenide for reliable non-enzymatic glucose sensing	11
Indoor CO2 removal: decentralized carbon capture by air conditioning	11
Interface engineering of composite systems: Focusing on the compatibility of reduced graphene oxide and Bi0.8La0.1Ba0.1Fe0.9Ti0.1O3 hybrid systems	11
Low-pressure air plasma-treated polytetrafluoroethylene surface for efficient triboelectric nanogenerator	11
An insight into the application and progress of artificial intelligence in the hydrogen production industry: A review	10
A review on clay exfoliation methods and modifications for CO2 capture application	10
Waste frying oil derived carbon nano-onions as a cost-effective cathode material for high-voltage zinc-ion hybrid supercapacitors	10
N-cyanoguanidine modified-black peanut shell biochar: fabrication and its sorption for Cu(II) and Co(II) in a single and mixed solutions	10
Controlled synthesis of nickel phosphides: Mechanistic insights and catalytic activity in hydrogen peroxide production	10
Selective production of hydrogen isotope gases via PdAg-catalyzed dehydrogenation of formic acid in D2O assisted by surface-grafted amine groups	10
Bifunctional mesoporous silica solid acids for transformation of glucose to 5-hydroxymethylfurfural	10
Constructing high-capacitance electrochemical capacitors through the introduction of V ions into MoS2/Ni3S2 nanosheets	10
Recent progress in MnO2-based oxygen electrocatalysts for rechargeable zinc-air batteries	10
High performance all lignin derived supercapacitors for energy storage applications	10
Poly(lactic acid) nanofibers containing phosphorylcholine grafts for transdermal drug delivery systems	10
Roadmap on bio-derived materials for wearable triboelectric devices	10
Sustainable high-yield lignocellulosic fibers and modification technologies educing softness and strength for tissues and hygiene products for global health	10
How do defects affect hydrogen spillover on graphene-supported Pt? A DFT study	10
Biosynthesis of Pt doped Zn bimetallic nanoparticles by using Polygonum glabrum extract for colorimetric, fluorimetric (Ni2+, Hg2+ and Fe2+) ions sensing and photocatalytic degradation of organic dye	10
Replacing synthetic polymer electrolytes in energy storage with flexible biodegradable alternatives: sustainable green biopolymer blend electrolyte for supercapacitor device	10
The application of green synthesis nanoparticles in wound healing: a review	10
A comparative study on modification of aerogel-based biosorbents from coconut fibers for treatment of dye- and oil-contaminated water	10
The mechanism of hydride formation during electrochemical hydrogen charging of Ti–6Al–4V	10
Recent advance of atomically dispersed catalysts for direct methane oxidation under mild aqueous conditions	10
Flexible dual-mode ammonia-impedance sensing patch (FDP) based on Ti3C2Tx MXene/graphene material and symmetric structure	9
Chitosan-hydroxyapatite composites made from sustainable sources: A morphology and antibacterial study	9
Utilizing desert sand as raw material for manufacturing silica-based materials and byproducts	9
A comprehensive review on utilization of waste materials in wood plastic composite	9
A step towards RoHS compliance for perovskite devices by using a novel lead-capturing encapsulant	9
Performance of foam concrete developed from construction and demolition waste	9
Porous rGO/networked cellulose composite membranes: Towards enhanced nanofiltration performance of rGO-based membranes	9
Plasmonic antenna enhancement on Pd cluster towards high selective FDCA production	9
Perovskite photovoltaics with cutting-edge strategies in 2D TMDs-based interfacial layer optimization	9
Highly oriented (002) crystals zinc powder from recovery of zinc smelting slag	9
Iron phthalocyanine as electron pool for boosted electrocatalytic activity of nickel oxide nanoclusters	9
Carbon nanotubes ethylenediamine crosslinked membrane for enhanced hydrocarbons separation and filtration performance	9
Photooxidation of biomass for sustainable chemicals and hydrogen production on graphitic carbon nitride-based materials: A comprehensive review	9
The effects of pore shape and geometry on the storage of CO2 in mesoporous media	9
Always-on photocatalytic antibacterial facemask with mini UV-LED array	9
Secondary carbon skeletons constructed in porous carbon for electric double layer capacitors	9
Optimal synthesis of zeolite materials for humidity control from recycled industrial waste: central composite design	9
Novel rare earth metal–doped one-dimensional TiO2 nanostructures: Fundamentals and multifunctional applications	9
Insights into the stability of copper gas diffusion electrodes for carbon dioxide reduction at high reaction rates	9
Constructing rational pore in nanocarbons by chemical and physical co-activation of polyaniline for high performance electrical double layer capacitors	9
Milli-fluidic setup for continuous flow synthesis of organic semiconductor nanoparticles	9
MXene/carbon composites for electrochemical energy storage and conversion	9
Investigation of electrochemical features of a novel Ni2P2O7-Polyaniline nanohybrid as electroactive material in high-reliable supercapacitors	9
Visible light-responsive Ce-doped ZnO ceramic nanostructures as effective photocatalysts for removal of persistent organic pollutants from contaminated waters	8
Forward osmosis process for energy materials recovery from industrial wastewater with simultaneous recovery of reusable water: a sustainable approach	8
Biopolymer-derived structured graphitic carbons as metal-free heterogeneous ozonation catalysts in water	8
Facile synthesis of UiO-66/PAN adsorptive membrane for effective arsenic removal	8
Corrigendum to ‘Optimization of transition metal sulfide through sputtered transition metal nitride thin film for hybrid supercapacitors’ [25, 100680]	8
Shape-stable erythritol composite phase change materials with controlled latent heat release for spatiotemporally thermal energy utilization	8
Characteristics of environmental efficiency for different types of contaminated sites in China	8
Hexaazatriphenylene-doped MXene films for the high-performance micro-supercapacitors and wearable pressure sensor system	8
Plasma-activated water for improved intercalation and pseudocapacitance of MnO2 supercapacitor electrodes	8
Theoretical predictions of high-performance dual-atom alloys for the decomposition of formic acid	8
Synergistic effect of combining UiO-66 nanoparticles and MXene nanosheets in Pebax mixed-matrix membranes for CO2 capture	8
Optimization of hydrothermal pretreatment to prepare g-C3N4 with enhanced catalyst yield and photocatalytic activity for aqueous contaminant removal	8
Reusable melanin-based biosorbents for efficient methylene blue removal: the new frontier of fungi-inspired allomelanin coatings for sustainable water remediation processes	8
Twin-screw extrusion optimization and study of morphological, thermal, mechanical and fracture properties of sustainable Poly(lactic acid) (PLA) and Poly(butylene sebacate) (PBSe) blends	8
Induction furnace slag as fine and coarse aggregate in quaternary blended self-compacting concrete: A comprehensive study on durability and performance	8
Facile surface-controlled synthesis of phytic acid-facilitated calcium carbonate composites for highly efficient ferric ion adsorption and recovery from rust	8
Novel cement-based sandwich composites engineered with ground waste tire rubber: design, production, and preliminary results	8
Musa balbisiana colla banana flower derived magnetic heterogeneous nanocatalyst for cleaner biodiesel production from jatropha oil	8
Tremella-like hierarchical carbon derived from carbon dots through sponge-templated synthesis for supercapacitor electrodes	8
Synthesis of a MOF derived porous graphene and pyrolytic carbon supported zinc stannate nanohybrid electrode with enhanced lithium-ion storage performances	8
Enhancing catalytic and antibacterial activity with size-controlled yttrium and graphene quantum dots doped MgO nanostructures: A molecular docking analysis	8
Facile green synthesis of rGO and NiO, and fabrication of a novel ternary nanoheterostructure NiO@g-C3N4-rGO as earth abundant superior photocatalyst for dye degradation	8